kernel_optimize_test/arch/arm/mach-pxa
eric miao ce4fb7b892 pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}
This is part of the effort moving peripheral registers outside of pxa-regs.h,
and using ioremap() make it possible the same IP can be re-used on different
processors with different registers space

As a result, the fixed mapping in pxa_map_io() is removed.

The regs-lcd.h can actually moved to where closer to pxafb.c but some of its
bit definitions are directly used by various platform code, though this is not
a good style.

Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:31 -07:00
..
akita-ioexp.c i2c: normal_i2c can be made const (remaining drivers) 2008-01-27 18:14:47 +01:00
clock.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
clock.h [ARM] pxa: introduce clk support for PXA SoC clocks 2007-10-12 21:14:55 +01:00
cm-x270-pci.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
cm-x270-pci.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
cm-x270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
colibri.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi_lcd.c [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
corgi_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi_ssp.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
cpu-pxa.c [ARM] eliminate MODULE_PARM() usage 2008-02-29 22:47:17 +00:00
devices.c [ARM] pxa: V4L2 soc_camera driver for PXA270 2008-04-19 17:14:30 +01:00
devices.h [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
dma.c [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
em-x270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
eseries.c [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. 2008-01-28 13:13:13 +00:00
generic.c pxafb: convert fb driver to use ioremap() and __raw_{readl, writel} 2008-04-30 08:29:31 -07:00
generic.h [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h 2008-04-19 11:29:04 +01:00
gpio.c [ARM] 5003/1: Shut up sparse warnings 2008-04-19 11:29:09 +01:00
gumstix.c [ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixup 2008-04-21 12:47:46 +01:00
idp.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
irq.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
Kconfig [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
leds-idp.c
leds-lubbock.c
leds-mainstone.c
leds-trizeps4.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
leds.c
leds.h
littleton.c [ARM] pxa: add keypad support for littleton 2008-04-19 11:29:06 +01:00
lpd270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
lubbock.c [ARM] pxa: lubbock: move mis-placed SPI info 2008-04-19 11:29:08 +01:00
magician.c [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info 2008-04-24 21:55:59 +01:00
mainstone.c [ARM] 4901/3: mainstone: Register primary I2C bus 2008-04-19 11:29:06 +01:00
Makefile [ARM] pxa: fix 1c104e0e4f 2008-04-29 21:28:03 +01:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
mfp-pxa3xx.c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial 2008-04-21 16:36:46 -07:00
pcm027.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pcm990-baseboard.c i2c: Convert most new-style drivers to use module aliasing 2008-04-29 23:11:40 +02:00
pm.c [ARM] 5014/1: Cleanup reset state before entering suspend or resetting. 2008-04-24 14:34:26 +01:00
poodle.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pxa3xx.c [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake() 2008-04-24 21:56:35 +01:00
pxa25x.c [ARM] pxa: initialise PXA devices before platform init code 2008-04-19 11:29:09 +01:00
pxa27x.c [ARM] pxa: initialise PXA devices before platform init code 2008-04-19 11:29:09 +01:00
pxa300.c [ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com 2007-10-31 15:21:48 +00:00
pxa320.c [ARM] 4675/1: pxa: fix mfp address definition error for pxa320 2007-11-29 20:52:54 +00:00
sharpsl_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
sharpsl.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
sleep.S [ARM] pxa: add preliminary suspend/resume code for pxa3xx 2008-02-04 13:17:33 +00:00
smemc.c [ARM] pxa: introduce sysdev for pxa3xx static memory controller 2008-02-04 13:17:33 +00:00
spitz_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
spitz.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
ssp.c Merge branch 'pxa-plat' into devel 2008-01-28 13:21:38 +00:00
standby.S [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme 2008-01-26 15:07:56 +00:00
time.c [ARM] pxa: fix PXA27x resume 2008-01-26 15:07:57 +00:00
tosa.c [ARM] 5002/1: tosa: add two more leds 2008-04-19 11:29:09 +01:00
trizeps4.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
zylonite_pxa300.c [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line 2008-04-19 11:29:09 +01:00
zylonite_pxa320.c [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line 2008-04-19 11:29:09 +01:00
zylonite.c [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line 2008-04-19 11:29:09 +01:00