forked from luck/tmp_suning_uos_patched
1394f03221
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
990 lines
22 KiB
Plaintext
990 lines
22 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see Documentation/kbuild/kconfig-language.txt.
|
|
#
|
|
|
|
mainmenu "uClinux/Blackfin (w/o MMU) Kernel Configuration"
|
|
|
|
config MMU
|
|
bool
|
|
default n
|
|
|
|
config FPU
|
|
bool
|
|
default n
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
default y
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
default n
|
|
|
|
config BLACKFIN
|
|
bool
|
|
default y
|
|
|
|
config BFIN
|
|
bool
|
|
default y
|
|
|
|
config SEMAPHORE_SLEEPERS
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_FIND_NEXT_BIT
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_HWEIGHT
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_HARDIRQS
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_IRQ_PROBE
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_TIME
|
|
bool
|
|
default n
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config FORCE_MAX_ZONEORDER
|
|
int
|
|
default "14"
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config IRQCHIP_DEMUX_GPIO
|
|
bool
|
|
default y
|
|
|
|
source "init/Kconfig"
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
menu "Blackfin Processor Options"
|
|
|
|
comment "Processor and Board Settings"
|
|
|
|
choice
|
|
prompt "CPU"
|
|
default BF533
|
|
|
|
config BF531
|
|
bool "BF531"
|
|
help
|
|
BF531 Processor Support.
|
|
|
|
config BF532
|
|
bool "BF532"
|
|
help
|
|
BF532 Processor Support.
|
|
|
|
config BF533
|
|
bool "BF533"
|
|
help
|
|
BF533 Processor Support.
|
|
|
|
config BF534
|
|
bool "BF534"
|
|
help
|
|
BF534 Processor Support.
|
|
|
|
config BF536
|
|
bool "BF536"
|
|
help
|
|
BF536 Processor Support.
|
|
|
|
config BF537
|
|
bool "BF537"
|
|
help
|
|
BF537 Processor Support.
|
|
|
|
config BF561
|
|
bool "BF561"
|
|
help
|
|
Not Supported Yet - Work in progress - BF561 Processor Support.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Silicon Rev"
|
|
default BF_REV_0_2 if BF537
|
|
default BF_REV_0_3 if BF533
|
|
|
|
config BF_REV_0_2
|
|
bool "0.2"
|
|
depends on (BF537 || BF536 || BF534)
|
|
|
|
config BF_REV_0_3
|
|
bool "0.3"
|
|
depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
|
|
|
|
config BF_REV_0_4
|
|
bool "0.4"
|
|
depends on (BF561 || BF533 || BF532 || BF531)
|
|
|
|
config BF_REV_0_5
|
|
bool "0.5"
|
|
depends on (BF561 || BF533 || BF532 || BF531)
|
|
|
|
endchoice
|
|
|
|
config BFIN_DUAL_CORE
|
|
bool
|
|
depends on (BF561)
|
|
default y
|
|
|
|
config BFIN_SINGLE_CORE
|
|
bool
|
|
depends on !BFIN_DUAL_CORE
|
|
default y
|
|
|
|
choice
|
|
prompt "System type"
|
|
default BFIN533_STAMP
|
|
help
|
|
Do NOT change the board here. Please use the top level
|
|
configuration to ensure that all the other settings are
|
|
correct.
|
|
|
|
config BFIN533_EZKIT
|
|
bool "BF533-EZKIT"
|
|
depends on (BF533 || BF532 || BF531)
|
|
help
|
|
BF533-EZKIT-LITE board Support.
|
|
|
|
config BFIN533_STAMP
|
|
bool "BF533-STAMP"
|
|
depends on (BF533 || BF532 || BF531)
|
|
help
|
|
BF533-STAMP board Support.
|
|
|
|
config BFIN537_STAMP
|
|
bool "BF537-STAMP"
|
|
depends on (BF537 || BF536 || BF534)
|
|
help
|
|
BF537-STAMP board Support.
|
|
|
|
config BFIN533_BLUETECHNIX_CM
|
|
bool "Bluetechnix CM-BF533"
|
|
depends on (BF533)
|
|
help
|
|
CM-BF533 support for EVAL- and DEV-Board.
|
|
|
|
config BFIN537_BLUETECHNIX_CM
|
|
bool "Bluetechnix CM-BF537"
|
|
depends on (BF537)
|
|
help
|
|
CM-BF537 support for EVAL- and DEV-Board.
|
|
|
|
config BFIN561_BLUETECHNIX_CM
|
|
bool "BF561-CM"
|
|
depends on (BF561)
|
|
help
|
|
CM-BF561 support for EVAL- and DEV-Board.
|
|
|
|
config BFIN561_EZKIT
|
|
bool "BF561-EZKIT"
|
|
depends on (BF561)
|
|
help
|
|
BF561-EZKIT-LITE board Support.
|
|
|
|
config PNAV10
|
|
bool "PNAV 1.0 board"
|
|
depends on (BF537)
|
|
help
|
|
PNAV 1.0 board Support.
|
|
|
|
config GENERIC_BOARD
|
|
bool "Custom"
|
|
depends on (BF537 || BF536 \
|
|
|| BF534 || BF561 || BF535 || BF533 || BF532 || BF531)
|
|
help
|
|
GENERIC or Custom board Support.
|
|
|
|
endchoice
|
|
|
|
config MEM_GENERIC_BOARD
|
|
bool
|
|
depends on GENERIC_BOARD
|
|
default y
|
|
|
|
config MEM_MT48LC64M4A2FB_7E
|
|
bool
|
|
depends on (BFIN533_STAMP)
|
|
default y
|
|
|
|
config MEM_MT48LC16M16A2TG_75
|
|
bool
|
|
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
|
|
|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM)
|
|
default y
|
|
|
|
config MEM_MT48LC32M8A2_75
|
|
bool
|
|
depends on (BFIN537_STAMP || PNAV10)
|
|
default y
|
|
|
|
config MEM_MT48LC8M32B2B5_7
|
|
bool
|
|
depends on (BFIN561_BLUETECHNIX_CM)
|
|
default y
|
|
|
|
config BFIN_SHARED_FLASH_ENET
|
|
bool
|
|
depends on (BFIN533_STAMP)
|
|
default y
|
|
|
|
source "arch/blackfin/mach-bf533/Kconfig"
|
|
source "arch/blackfin/mach-bf561/Kconfig"
|
|
source "arch/blackfin/mach-bf537/Kconfig"
|
|
|
|
menu "Board customizations"
|
|
|
|
config CMDLINE_BOOL
|
|
bool "Default bootloader kernel arguments"
|
|
|
|
config CMDLINE
|
|
string "Initial kernel command string"
|
|
depends on CMDLINE_BOOL
|
|
default "console=ttyBF0,57600"
|
|
help
|
|
If you don't have a boot loader capable of passing a command line string
|
|
to the kernel, you may specify one here. As a minimum, you should specify
|
|
the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
|
|
|
|
comment "Board Setup"
|
|
|
|
config CLKIN_HZ
|
|
int "Crystal Frequency in Hz"
|
|
default "11059200" if BFIN533_STAMP
|
|
default "27000000" if BFIN533_EZKIT
|
|
default "25000000" if BFIN537_STAMP
|
|
default "30000000" if BFIN561_EZKIT
|
|
default "24576000" if PNAV10
|
|
help
|
|
The frequency of CLKIN crystal oscillator on the board in Hz.
|
|
|
|
config MEM_SIZE
|
|
int "SDRAM Memory Size in MBytes"
|
|
default 32 if BFIN533_EZKIT
|
|
default 64 if BFIN537_STAMP
|
|
default 64 if BFIN561_EZKIT
|
|
default 128 if BFIN533_STAMP
|
|
default 64 if PNAV10
|
|
|
|
config MEM_ADD_WIDTH
|
|
int "SDRAM Memory Address Width"
|
|
default 9 if BFIN533_EZKIT
|
|
default 9 if BFIN561_EZKIT
|
|
default 10 if BFIN537_STAMP
|
|
default 11 if BFIN533_STAMP
|
|
default 10 if PNAV10
|
|
|
|
config ENET_FLASH_PIN
|
|
int "PF port/pin used for flash and ethernet sharing"
|
|
depends on (BFIN533_STAMP)
|
|
default 0
|
|
help
|
|
PF port/pin used for flash and ethernet sharing to allow other PF
|
|
pins to be used on other platforms without having to touch common
|
|
code.
|
|
For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
|
|
|
|
config BOOT_LOAD
|
|
hex "Kernel load address for booting"
|
|
default "0x1000"
|
|
help
|
|
This option allows you to set the load address of the kernel.
|
|
This can be useful if you are on a board which has a small amount
|
|
of memory or you wish to reserve some memory at the beginning of
|
|
the address space.
|
|
|
|
Note that you generally want to keep this value at or above 4k
|
|
(0x1000) as this will allow the kernel to capture NULL pointer
|
|
references.
|
|
|
|
comment "LED Status Indicators"
|
|
depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
|
|
|
|
config BFIN_ALIVE_LED
|
|
bool "Enable Board Alive"
|
|
depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
|
|
default n
|
|
help
|
|
Blink the LEDs you select when the kernel is running. Helps detect
|
|
a hung kernel.
|
|
|
|
config BFIN_ALIVE_LED_NUM
|
|
int "LED"
|
|
depends on BFIN_ALIVE_LED
|
|
range 1 3 if BFIN533_STAMP
|
|
default "3" if BFIN533_STAMP
|
|
help
|
|
Select the LED (marked on the board) for you to blink.
|
|
|
|
config BFIN_IDLE_LED
|
|
bool "Enable System Load/Idle LED"
|
|
depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
|
|
default n
|
|
help
|
|
Blinks the LED you select when to determine kernel load.
|
|
|
|
config BFIN_IDLE_LED_NUM
|
|
int "LED"
|
|
depends on BFIN_IDLE_LED
|
|
range 1 3 if BFIN533_STAMP
|
|
default "2" if BFIN533_STAMP
|
|
help
|
|
Select the LED (marked on the board) for you to blink.
|
|
|
|
#
|
|
# Sorry - but you need to put the hex address here -
|
|
#
|
|
|
|
# Flag Data register
|
|
config BFIN_ALIVE_LED_PORT
|
|
hex
|
|
default 0xFFC00700 if (BFIN533_STAMP)
|
|
|
|
# Peripheral Flag Direction Register
|
|
config BFIN_ALIVE_LED_DPORT
|
|
hex
|
|
default 0xFFC00730 if (BFIN533_STAMP)
|
|
|
|
config BFIN_ALIVE_LED_PIN
|
|
hex
|
|
default 0x04 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 1)
|
|
default 0x08 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 2)
|
|
default 0x10 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 3)
|
|
|
|
config BFIN_IDLE_LED_PORT
|
|
hex
|
|
default 0xFFC00700 if (BFIN533_STAMP)
|
|
|
|
# Peripheral Flag Direction Register
|
|
config BFIN_IDLE_LED_DPORT
|
|
hex
|
|
default 0xFFC00730 if (BFIN533_STAMP)
|
|
|
|
config BFIN_IDLE_LED_PIN
|
|
hex
|
|
default 0x04 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 1)
|
|
default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2)
|
|
default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3)
|
|
|
|
comment "Console UART Setup"
|
|
|
|
choice
|
|
prompt "Baud Rate"
|
|
default BAUD_57600
|
|
config BAUD_9600
|
|
bool "9600"
|
|
config BAUD_19200
|
|
bool "19200"
|
|
config BAUD_38400
|
|
bool "38400"
|
|
config BAUD_57600
|
|
bool "57600"
|
|
config BAUD_115200
|
|
bool "115200"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Parity"
|
|
default BAUD_NO_PARITY
|
|
config BAUD_NO_PARITY
|
|
bool "No Parity"
|
|
config BAUD_PARITY
|
|
bool "Parity"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Stop Bits"
|
|
default BAUD_1_STOPBIT
|
|
config BAUD_1_STOPBIT
|
|
bool "1"
|
|
config BAUD_2_STOPBIT
|
|
bool "2"
|
|
endchoice
|
|
|
|
endmenu
|
|
|
|
|
|
menu "Blackfin Kernel Optimizations"
|
|
|
|
comment "Timer Tick"
|
|
|
|
source kernel/Kconfig.hz
|
|
|
|
comment "Memory Optimizations"
|
|
|
|
config I_ENTRY_L1
|
|
bool "Locate interrupt entry code in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled interrupt entry code (STORE/RESTORE CONTEXT) is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config EXCPT_IRQ_SYSC_L1
|
|
bool "Locate entire ASM lowlevel excepetion / interrupt - Syscall and CPLB handler code in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled entire ASM lowlevel exception and interrupt entry code (STORE/RESTORE CONTEXT) is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config DO_IRQ_L1
|
|
bool "Locate frequently called do_irq dispatcher function in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled frequently called do_irq dispatcher function is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config CORE_TIMER_IRQ_L1
|
|
bool "Locate frequently called timer_interrupt() function in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled frequently called timer_interrupt() function is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config IDLE_L1
|
|
bool "Locate frequently idle function in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled frequently called idle function is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config SCHEDULE_L1
|
|
bool "Locate kernel schedule function in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled frequently called kernel schedule is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config ARITHMETIC_OPS_L1
|
|
bool "Locate kernel owned arithmetic functions in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled arithmetic functions are linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config ACCESS_OK_L1
|
|
bool "Locate access_ok function in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled access_ok function is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config MEMSET_L1
|
|
bool "Locate memset function in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled memset function is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config MEMCPY_L1
|
|
bool "Locate memcpy function in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled memcpy function is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config SYS_BFIN_SPINLOCK_L1
|
|
bool "Locate sys_bfin_spinlock function in L1 Memory"
|
|
default y
|
|
help
|
|
If enabled sys_bfin_spinlock function is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config IP_CHECKSUM_L1
|
|
bool "Locate IP Checksum function in L1 Memory"
|
|
default n
|
|
help
|
|
If enabled IP Checksum function is linked
|
|
into L1 instruction memory.(less latency)
|
|
|
|
config CACHELINE_ALIGNED_L1
|
|
bool "Locate cacheline_aligned data to L1 Data Memory"
|
|
default y
|
|
depends on !BF531
|
|
help
|
|
If enabled cacheline_anligned data is linked
|
|
into L1 data memory.(less latency)
|
|
|
|
config SYSCALL_TAB_L1
|
|
bool "Locate Syscall Table L1 Data Memory"
|
|
default n
|
|
depends on !BF531
|
|
help
|
|
If enabled the Syscall LUT is linked
|
|
into L1 data memory.(less latency)
|
|
|
|
config CPLB_SWITCH_TAB_L1
|
|
bool "Locate CPLB Switch Tables L1 Data Memory"
|
|
default n
|
|
depends on !BF531
|
|
help
|
|
If enabled the CPLB Switch Tables are linked
|
|
into L1 data memory.(less latency)
|
|
|
|
endmenu
|
|
|
|
|
|
choice
|
|
prompt "Kernel executes from"
|
|
help
|
|
Choose the memory type that the kernel will be running in.
|
|
|
|
config RAMKERNEL
|
|
bool "RAM"
|
|
help
|
|
The kernel will be resident in RAM when running.
|
|
|
|
config ROMKERNEL
|
|
bool "ROM"
|
|
help
|
|
The kernel will be resident in FLASH/ROM when running.
|
|
|
|
endchoice
|
|
|
|
source "mm/Kconfig"
|
|
|
|
config LARGE_ALLOCS
|
|
bool "Allow allocating large blocks (> 1MB) of memory"
|
|
help
|
|
Allow the slab memory allocator to keep chains for very large
|
|
memory sizes - upto 32MB. You may need this if your system has
|
|
a lot of RAM, and you need to able to allocate very large
|
|
contiguous chunks. If unsure, say N.
|
|
|
|
config BFIN_DMA_5XX
|
|
bool "Enable DMA Support"
|
|
depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
|
|
default y
|
|
help
|
|
DMA driver for BF5xx.
|
|
|
|
choice
|
|
prompt "Uncached SDRAM region"
|
|
default DMA_UNCACHED_1M
|
|
depends BFIN_DMA_5XX
|
|
config DMA_UNCACHED_2M
|
|
bool "Enable 2M DMA region"
|
|
config DMA_UNCACHED_1M
|
|
bool "Enable 1M DMA region"
|
|
config DMA_UNCACHED_NONE
|
|
bool "Disable DMA region"
|
|
endchoice
|
|
|
|
|
|
comment "Cache Support"
|
|
config BLKFIN_CACHE
|
|
bool "Enable ICACHE"
|
|
config BLKFIN_DCACHE
|
|
bool "Enable DCACHE"
|
|
config BLKFIN_DCACHE_BANKA
|
|
bool "Enable only 16k BankA DCACHE - BankB is SRAM"
|
|
depends on BLKFIN_DCACHE && !BF531
|
|
default n
|
|
config BLKFIN_CACHE_LOCK
|
|
bool "Enable Cache Locking"
|
|
|
|
choice
|
|
prompt "Policy"
|
|
depends on BLKFIN_DCACHE
|
|
default BLKFIN_WB
|
|
config BLKFIN_WB
|
|
bool "Write back"
|
|
help
|
|
Write Back Policy:
|
|
Cached data will be written back to SDRAM only when needed.
|
|
This can give a nice increase in performance, but beware of
|
|
broken drivers that do not properly invalidate/flush their
|
|
cache.
|
|
|
|
Write Through Policy:
|
|
Cached data will always be written back to SDRAM when the
|
|
cache is updated. This is a completely safe setting, but
|
|
performance is worse than Write Back.
|
|
|
|
If you are unsure of the options and you want to be safe,
|
|
then go with Write Through.
|
|
|
|
config BLKFIN_WT
|
|
bool "Write through"
|
|
help
|
|
Write Back Policy:
|
|
Cached data will be written back to SDRAM only when needed.
|
|
This can give a nice increase in performance, but beware of
|
|
broken drivers that do not properly invalidate/flush their
|
|
cache.
|
|
|
|
Write Through Policy:
|
|
Cached data will always be written back to SDRAM when the
|
|
cache is updated. This is a completely safe setting, but
|
|
performance is worse than Write Back.
|
|
|
|
If you are unsure of the options and you want to be safe,
|
|
then go with Write Through.
|
|
|
|
endchoice
|
|
|
|
config L1_MAX_PIECE
|
|
int "Set the max L1 SRAM pieces"
|
|
default 16
|
|
help
|
|
Set the max memory pieces for the L1 SRAM allocation algorithm.
|
|
Min value is 16. Max value is 1024.
|
|
|
|
menu "Clock Settings"
|
|
|
|
|
|
config BFIN_KERNEL_CLOCK
|
|
bool "Re-program Clocks while Kernel boots?"
|
|
default n
|
|
help
|
|
This option decides if kernel clocks are re-programed from the
|
|
bootloader settings. If the clocks are not set, the SDRAM settings
|
|
are also not changed, and the Bootloader does 100% of the hardware
|
|
configuration.
|
|
|
|
config VCO_MULT
|
|
int "VCO Multiplier"
|
|
depends on BFIN_KERNEL_CLOCK
|
|
default "22" if BFIN533_EZKIT
|
|
default "45" if BFIN533_STAMP
|
|
default "20" if BFIN537_STAMP
|
|
default "22" if BFIN533_BLUETECHNIX_CM
|
|
default "20" if BFIN537_BLUETECHNIX_CM
|
|
default "20" if BFIN561_BLUETECHNIX_CM
|
|
default "20" if BFIN561_EZKIT
|
|
|
|
config CCLK_DIV
|
|
int "Core Clock Divider"
|
|
depends on BFIN_KERNEL_CLOCK
|
|
default 1 if BFIN533_EZKIT
|
|
default 1 if BFIN533_STAMP
|
|
default 1 if BFIN537_STAMP
|
|
default 1 if BFIN533_BLUETECHNIX_CM
|
|
default 1 if BFIN537_BLUETECHNIX_CM
|
|
default 1 if BFIN561_BLUETECHNIX_CM
|
|
default 1 if BFIN561_EZKIT
|
|
|
|
config SCLK_DIV
|
|
int "System Clock Divider"
|
|
depends on BFIN_KERNEL_CLOCK
|
|
default 5 if BFIN533_EZKIT
|
|
default 5 if BFIN533_STAMP
|
|
default 4 if BFIN537_STAMP
|
|
default 5 if BFIN533_BLUETECHNIX_CM
|
|
default 4 if BFIN537_BLUETECHNIX_CM
|
|
default 4 if BFIN561_BLUETECHNIX_CM
|
|
default 5 if BFIN561_EZKIT
|
|
|
|
config CLKIN_HALF
|
|
bool "Half ClockIn"
|
|
depends on BFIN_KERNEL_CLOCK
|
|
default n
|
|
|
|
config PLL_BYPASS
|
|
bool "Bypass PLL"
|
|
depends on BFIN_KERNEL_CLOCK
|
|
default n
|
|
|
|
endmenu
|
|
|
|
comment "Asynchonous Memory Configuration"
|
|
|
|
menu "EBIU_AMBCTL Global Control"
|
|
config C_AMCKEN
|
|
bool "Enable CLKOUT"
|
|
default y
|
|
|
|
config C_CDPRIO
|
|
bool "DMA has priority over core for ext. accesses"
|
|
default n
|
|
|
|
config C_B0PEN
|
|
depends on BF561
|
|
bool "Bank 0 16 bit packing enable"
|
|
default y
|
|
|
|
config C_B1PEN
|
|
depends on BF561
|
|
bool "Bank 1 16 bit packing enable"
|
|
default y
|
|
|
|
config C_B2PEN
|
|
depends on BF561
|
|
bool "Bank 2 16 bit packing enable"
|
|
default y
|
|
|
|
config C_B3PEN
|
|
depends on BF561
|
|
bool "Bank 3 16 bit packing enable"
|
|
default n
|
|
|
|
choice
|
|
prompt"Enable Asynchonous Memory Banks"
|
|
default C_AMBEN_ALL
|
|
|
|
config C_AMBEN
|
|
bool "Disable All Banks"
|
|
|
|
config C_AMBEN_B0
|
|
bool "Enable Bank 0"
|
|
|
|
config C_AMBEN_B0_B1
|
|
bool "Enable Bank 0 & 1"
|
|
|
|
config C_AMBEN_B0_B1_B2
|
|
bool "Enable Bank 0 & 1 & 2"
|
|
|
|
config C_AMBEN_ALL
|
|
bool "Enable All Banks"
|
|
endchoice
|
|
endmenu
|
|
|
|
menu "EBIU_AMBCTL Control"
|
|
config BANK_0
|
|
hex "Bank 0"
|
|
default 0x7BB0
|
|
|
|
config BANK_1
|
|
hex "Bank 1"
|
|
default 0x7BB0
|
|
|
|
config BANK_2
|
|
hex "Bank 2"
|
|
default 0x7BB0
|
|
|
|
config BANK_3
|
|
hex "Bank 3"
|
|
default 0x99B3
|
|
endmenu
|
|
|
|
endmenu
|
|
|
|
#############################################################################
|
|
menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
|
|
|
|
config PCI
|
|
bool "PCI support"
|
|
help
|
|
Support for PCI bus.
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
config HOTPLUG
|
|
bool "Support for hot-pluggable device"
|
|
help
|
|
Say Y here if you want to plug devices into your computer while
|
|
the system is running, and be able to use them quickly. In many
|
|
cases, the devices can likewise be unplugged at any time too.
|
|
|
|
One well known example of this is PCMCIA- or PC-cards, credit-card
|
|
size devices such as network cards, modems or hard drives which are
|
|
plugged into slots found on all modern laptop computers. Another
|
|
example, used on modern desktops as well as laptops, is USB.
|
|
|
|
Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
|
|
software (at <http://linux-hotplug.sourceforge.net/>) and install it.
|
|
Then your kernel will automatically call out to a user mode "policy
|
|
agent" (/sbin/hotplug) to load modules and set up software needed
|
|
to use devices as you hotplug them.
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
source "drivers/pci/hotplug/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Executable file formats"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
endmenu
|
|
|
|
menu "Power management options"
|
|
source "kernel/power/Kconfig"
|
|
|
|
choice
|
|
prompt "Select PM Wakeup Event Source"
|
|
default PM_WAKEUP_GPIO_BY_SIC_IWR
|
|
depends on PM
|
|
help
|
|
If you have a GPIO already configured as input with the corresponding PORTx_MASK
|
|
bit set - "Specify Wakeup Event by SIC_IWR value"
|
|
|
|
config PM_WAKEUP_GPIO_BY_SIC_IWR
|
|
bool "Specify Wakeup Event by SIC_IWR value"
|
|
config PM_WAKEUP_BY_GPIO
|
|
bool "Cause Wakeup Event by GPIO"
|
|
config PM_WAKEUP_GPIO_API
|
|
bool "Configure Wakeup Event by PM GPIO API"
|
|
|
|
endchoice
|
|
|
|
config PM_WAKEUP_SIC_IWR
|
|
hex "Wakeup Events (SIC_IWR)"
|
|
depends on PM_WAKEUP_GPIO_BY_SIC_IWR
|
|
default 0x80000000 if (BF537 || BF536 || BF534)
|
|
default 0x100000 if (BF533 || BF532 || BF531)
|
|
|
|
config PM_WAKEUP_GPIO_NUMBER
|
|
int "Wakeup GPIO number"
|
|
range 0 47
|
|
depends on PM_WAKEUP_BY_GPIO
|
|
default 2 if BFIN537_STAMP
|
|
|
|
choice
|
|
prompt "GPIO Polarity"
|
|
depends on PM_WAKEUP_BY_GPIO
|
|
default PM_WAKEUP_GPIO_POLAR_H
|
|
config PM_WAKEUP_GPIO_POLAR_H
|
|
bool "Active High"
|
|
config PM_WAKEUP_GPIO_POLAR_L
|
|
bool "Active Low"
|
|
config PM_WAKEUP_GPIO_POLAR_EDGE_F
|
|
bool "Falling EDGE"
|
|
config PM_WAKEUP_GPIO_POLAR_EDGE_R
|
|
bool "Rising EDGE"
|
|
config PM_WAKEUP_GPIO_POLAR_EDGE_B
|
|
bool "Both EDGE"
|
|
endchoice
|
|
|
|
endmenu
|
|
|
|
if (BF537 || BF533)
|
|
|
|
menu "CPU Frequency scaling"
|
|
|
|
source "drivers/cpufreq/Kconfig"
|
|
|
|
config CPU_FREQ
|
|
bool
|
|
default n
|
|
help
|
|
If you want to enable this option, you should select the
|
|
DPMC driver from Character Devices.
|
|
endmenu
|
|
|
|
endif
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/blackfin/oprofile/Kconfig"
|
|
|
|
menu "Kernel hacking"
|
|
|
|
source "lib/Kconfig.debug"
|
|
|
|
config DEBUG_HWERR
|
|
bool "Hardware error interrupt debugging"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
When enabled, the hardware error interrupt is never disabled, and
|
|
will happen immediately when an error condition occurs. This comes
|
|
at a slight cost in code size, but is necessary if you are getting
|
|
hardware error interrupts and need to know where they are coming
|
|
from.
|
|
|
|
config DEBUG_ICACHE_CHECK
|
|
bool "Check Instruction cache coherancy"
|
|
depends on DEBUG_KERNEL
|
|
depends on DEBUG_HWERR
|
|
help
|
|
Say Y here if you are getting wierd unexplained errors. This will
|
|
ensure that icache is what SDRAM says it should be, by doing a
|
|
byte wise comparision between SDRAM and instruction cache. This
|
|
also relocates the irq_panic() function to L1 memory, (which is
|
|
un-cached).
|
|
|
|
config DEBUG_KERNEL_START
|
|
bool "Debug Kernel Startup"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say Y here to put in an mini-execption handler before the kernel
|
|
replaces the bootloader exception handler. This will stop kernels
|
|
from dieing at startup with no visible error messages.
|
|
|
|
config DEBUG_SERIAL_EARLY_INIT
|
|
bool "Initialize serial driver early"
|
|
default n
|
|
depends on SERIAL_BFIN
|
|
help
|
|
Say Y here if you want to get kernel output early when kernel
|
|
crashes before the normal console initialization. If this option
|
|
is enable, console output will always go to the ttyBF0, no matter
|
|
what kernel boot paramters you set.
|
|
|
|
config DEBUG_HUNT_FOR_ZERO
|
|
bool "Catch NULL pointer reads/writes"
|
|
default y
|
|
help
|
|
Say Y here to catch reads/writes to anywhere in the memory range
|
|
from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in
|
|
catching common programming errors such as NULL pointer dereferences.
|
|
|
|
Misbehaving applications will be killed (generate a SEGV) while the
|
|
kernel will trigger a panic.
|
|
|
|
Enabling this option will take up an extra entry in CPLB table.
|
|
Otherwise, there is no extra overhead.
|
|
|
|
config DEBUG_BFIN_NO_KERN_HWTRACE
|
|
bool "Trace user apps (turn off hwtrace in kernel)"
|
|
default n
|
|
help
|
|
Some pieces of the kernel contain a lot of flow changes which can
|
|
quickly fill up the hardware trace buffer. When debugging crashes,
|
|
the hardware trace may indicate that the problem lies in kernel
|
|
space when in reality an application is buggy.
|
|
|
|
Say Y here to disable hardware tracing in some known "jumpy" pieces
|
|
of code so that the trace buffer will extend further back.
|
|
|
|
config DUAL_CORE_TEST_MODULE
|
|
tristate "Dual Core Test Module"
|
|
depends on (BF561)
|
|
default n
|
|
help
|
|
Say Y here to build-in dual core test module for dual core test.
|
|
|
|
config CPLB_INFO
|
|
bool "Display the CPLB information"
|
|
help
|
|
Display the CPLB information.
|
|
|
|
config ACCESS_CHECK
|
|
bool "Check the user pointer address"
|
|
default y
|
|
help
|
|
Usually the pointer transfer from user space is checked to see if its
|
|
address is in the kernel space.
|
|
|
|
Say N here to disable that check to improve the performance.
|
|
|
|
endmenu
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|