AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
cffe632a25
kernel_optimize_test/Documentation/SubmittingPatches
Randy Dunlap 58591e8a1f [PATCH] SubmittingPatches: diffstat options 
Add desired 'diffstat' options to use for kernel patches.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:04 -08:00

496 lines
17 KiB
Plaintext
Raw Blame History

How to Get Your Change Into the Linux Kernel
or
Care And Operation Of Your Linus Torvalds
For a person or company who wishes to submit a change to the Linux
kernel, the process can sometimes be daunting if you're not familiar
with "the system." This text is a collection of suggestions which
can greatly increase the chances of your change being accepted.
If you are submitting a driver, also read Documentation/SubmittingDrivers.
--------------------------------------------
SECTION 1 - CREATING AND SENDING YOUR CHANGE
--------------------------------------------
1) "diff -up"
------------
Use "diff -up" or "diff -uprN" to create patches.
All changes to the Linux kernel occur in the form of patches, as
generated by diff(1). When creating your patch, make sure to create it
in "unified diff" format, as supplied by the '-u' argument to diff(1).
Also, please use the '-p' argument which shows which C function each
change is in - that makes the resultant diff a lot easier to read.
Patches should be based in the root kernel source directory,
not in any lower subdirectory.
To create a patch for a single file, it is often sufficient to do:
SRCTREE= linux-2.6
MYFILE= drivers/net/mydriver.c
cd $SRCTREE
cp $MYFILE $MYFILE.orig
vi $MYFILE # make your change
cd ..
diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch
To create a patch for multiple files, you should unpack a "vanilla",
or unmodified kernel source tree, and generate a diff against your
own source tree. For example:
MYSRC= /devel/linux-2.6
tar xvfz linux-2.6.12.tar.gz
mv linux-2.6.12 linux-2.6.12-vanilla
diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \
linux-2.6.12-vanilla $MYSRC > /tmp/patch
"dontdiff" is a list of files which are generated by the kernel during
the build process, and should be ignored in any diff(1)-generated
patch. The "dontdiff" file is included in the kernel tree in
2.6.12 and later. For earlier kernel versions, you can get it
from <http://www.xenotime.net/linux/doc/dontdiff>.
Make sure your patch does not include any extra files which do not
belong in a patch submission. Make sure to review your patch -after-
generated it with diff(1), to ensure accuracy.
If your changes produce a lot of deltas, you may want to look into
splitting them into individual patches which modify things in
logical stages. This will facilitate easier reviewing by other
kernel developers, very important if you want your patch accepted.
There are a number of scripts which can aid in this:
Quilt:
http://savannah.nongnu.org/projects/quilt
Randy Dunlap's patch scripts:
http://www.xenotime.net/linux/scripts/patching-scripts-002.tar.gz
Andrew Morton's patch scripts:
http://www.zip.com.au/~akpm/linux/patches/
Instead of these scripts, quilt is the recommended patch management
tool (see above).
2) Describe your changes.
Describe the technical detail of the change(s) your patch includes.
Be as specific as possible. The WORST descriptions possible include
things like "update driver X", "bug fix for driver X", or "this patch
includes updates for subsystem X. Please apply."
If your description starts to get long, that's a sign that you probably
need to split up your patch. See #3, next.
3) Separate your changes.
Separate _logical changes_ into a single patch file.
For example, if your changes include both bug fixes and performance
enhancements for a single driver, separate those changes into two
or more patches. If your changes include an API update, and a new
driver which uses that new API, separate those into two patches.
On the other hand, if you make a single change to numerous files,
group those changes into a single patch. Thus a single logical change
is contained within a single patch.
If one patch depends on another patch in order for a change to be
complete, that is OK. Simply note "this patch depends on patch X"
in your patch description.
If you cannot condense your patch set into a smaller set of patches,
then only post say 15 or so at a time and wait for review and integration.
4) Select e-mail destination.
Look through the MAINTAINERS file and the source code, and determine
if your change applies to a specific subsystem of the kernel, with
an assigned maintainer. If so, e-mail that person.
If no maintainer is listed, or the maintainer does not respond, send
your patch to the primary Linux kernel developer's mailing list,
linux-kernel@vger.kernel.org. Most kernel developers monitor this
e-mail list, and can comment on your changes.
Do not send more than 15 patches at once to the vger mailing lists!!!
Linus Torvalds is the final arbiter of all changes accepted into the
Linux kernel. His e-mail address is <torvalds@osdl.org>. He gets
a lot of e-mail, so typically you should do your best to -avoid- sending
him e-mail.
Patches which are bug fixes, are "obvious" changes, or similarly
require little discussion should be sent or CC'd to Linus. Patches
which require discussion or do not have a clear advantage should
usually be sent first to linux-kernel. Only after the patch is
discussed should the patch then be submitted to Linus.
5) Select your CC (e-mail carbon copy) list.
Unless you have a reason NOT to do so, CC linux-kernel@vger.kernel.org.
Other kernel developers besides Linus need to be aware of your change,
so that they may comment on it and offer code review and suggestions.
linux-kernel is the primary Linux kernel developer mailing list.
Other mailing lists are available for specific subsystems, such as
USB, framebuffer devices, the VFS, the SCSI subsystem, etc. See the
MAINTAINERS file for a mailing list that relates specifically to
your change.
Majordomo lists of VGER.KERNEL.ORG at:
<http://vger.kernel.org/vger-lists.html>
If changes affect userland-kernel interfaces, please send
the MAN-PAGES maintainer (as listed in the MAINTAINERS file)
a man-pages patch, or at least a notification of the change,
so that some information makes its way into the manual pages.
Even if the maintainer did not respond in step #4, make sure to ALWAYS
copy the maintainer when you change their code.
For small patches you may want to CC the Trivial Patch Monkey
trivial@kernel.org managed by Adrian Bunk; which collects "trivial"
patches. Trivial patches must qualify for one of the following rules:
Spelling fixes in documentation
Spelling fixes which could break grep(1).
Warning fixes (cluttering with useless warnings is bad)
Compilation fixes (only if they are actually correct)
Runtime fixes (only if they actually fix things)
Removing use of deprecated functions/macros (eg. check_region).
Contact detail and documentation fixes
Non-portable code replaced by portable code (even in arch-specific,
since people copy, as long as it's trivial)
Any fix by the author/maintainer of the file. (ie. patch monkey
in re-transmission mode)
URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
6) No MIME, no links, no compression, no attachments. Just plain text.
Linus and other kernel developers need to be able to read and comment
on the changes you are submitting. It is important for a kernel
developer to be able to "quote" your changes, using standard e-mail
tools, so that they may comment on specific portions of your code.
For this reason, all patches should be submitting e-mail "inline".
WARNING: Be wary of your editor's word-wrap corrupting your patch,
if you choose to cut-n-paste your patch.
Do not attach the patch as a MIME attachment, compressed or not.
Many popular e-mail applications will not always transmit a MIME
attachment as plain text, making it impossible to comment on your
code. A MIME attachment also takes Linus a bit more time to process,
decreasing the likelihood of your MIME-attached change being accepted.
Exception: If your mailer is mangling patches then someone may ask
you to re-send them using MIME.
7) E-mail size.
When sending patches to Linus, always follow step #6.
Large changes are not appropriate for mailing lists, and some
maintainers. If your patch, uncompressed, exceeds 40 kB in size,
it is preferred that you store your patch on an Internet-accessible
server, and provide instead a URL (link) pointing to your patch.
8) Name your kernel version.
It is important to note, either in the subject line or in the patch
description, the kernel version to which this patch applies.
If the patch does not apply cleanly to the latest kernel version,
Linus will not apply it.
9) Don't get discouraged. Re-submit.
After you have submitted your change, be patient and wait. If Linus
likes your change and applies it, it will appear in the next version
of the kernel that he releases.
However, if your change doesn't appear in the next version of the
kernel, there could be any number of reasons. It's YOUR job to
narrow down those reasons, correct what was wrong, and submit your
updated change.
It is quite common for Linus to "drop" your patch without comment.
That's the nature of the system. If he drops your patch, it could be
due to
* Your patch did not apply cleanly to the latest kernel version
* Your patch was not sufficiently discussed on linux-kernel.
* A style issue (see section 2),
* An e-mail formatting issue (re-read this section)
* A technical problem with your change
* He gets tons of e-mail, and yours got lost in the shuffle
* You are being annoying (See Figure 1)
When in doubt, solicit comments on linux-kernel mailing list.
10) Include PATCH in the subject
Due to high e-mail traffic to Linus, and to linux-kernel, it is common
convention to prefix your subject line with [PATCH]. This lets Linus
and other kernel developers more easily distinguish patches from other
e-mail discussions.
11) Sign your work
To improve tracking of who did what, especially with patches that can
percolate to their final resting place in the kernel through several
layers of maintainers, we've introduced a "sign-off" procedure on
patches that are being emailed around.
The sign-off is a simple line at the end of the explanation for the
patch, which certifies that you wrote it or otherwise have the right to
pass it on as a open-source patch. The rules are pretty simple: if you
can certify the below:
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved.
then you just add a line saying
Signed-off-by: Random J Developer <random@developer.example.org>
Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
12) The canonical patch format
The canonical patch subject line is:
Subject: [PATCH 001/123] subsystem: summary phrase
The canonical patch message body contains the following:
- A "from" line specifying the patch author.
- An empty line.
- The body of the explanation, which will be copied to the
permanent changelog to describe this patch.
- The "Signed-off-by:" lines, described above, which will
also go in the changelog.
- A marker line containing simply "---".
- Any additional comments not suitable for the changelog.
- The actual patch (diff output).
The Subject line format makes it very easy to sort the emails
alphabetically by subject line - pretty much any email reader will
support that - since because the sequence number is zero-padded,
the numerical and alphabetic sort is the same.
The "subsystem" in the email's Subject should identify which
area or subsystem of the kernel is being patched.
The "summary phrase" in the email's Subject should concisely
describe the patch which that email contains. The "summary
phrase" should not be a filename. Do not use the same "summary
phrase" for every patch in a whole patch series.
Bear in mind that the "summary phrase" of your email becomes
a globally-unique identifier for that patch. It propagates
all the way into the git changelog. The "summary phrase" may
later be used in developer discussions which refer to the patch.
People will want to google for the "summary phrase" to read
discussion regarding that patch.
A couple of example Subjects:
Subject: [patch 2/5] ext2: improve scalability of bitmap searching
Subject: [PATCHv2 001/207] x86: fix eflags tracking
The "from" line must be the very first line in the message body,
and has the form:
From: Original Author <author@example.com>
The "from" line specifies who will be credited as the author of the
patch in the permanent changelog. If the "from" line is missing,
then the "From:" line from the email header will be used to determine
the patch author in the changelog.
The explanation body will be committed to the permanent source
changelog, so should make sense to a competent reader who has long
since forgotten the immediate details of the discussion that might
have led to this patch.
The "---" marker line serves the essential purpose of marking for patch
handling tools where the changelog message ends.
One good use for the additional comments after the "---" marker is for
a diffstat, to show what files have changed, and the number of inserted
and deleted lines per file. A diffstat is especially useful on bigger
patches. Other comments relevant only to the moment or the maintainer,
not suitable for the permanent changelog, should also go here.
Use diffstat options "-p 1 -w 70" so that filenames are listed from the
top of the kernel source tree and don't use too much horizontal space
(easily fit in 80 columns, maybe with some indentation).
See more details on the proper patch format in the following
references.
-----------------------------------
SECTION 2 - HINTS, TIPS, AND TRICKS
-----------------------------------
This section lists many of the common "rules" associated with code
submitted to the kernel. There are always exceptions... but you must
have a really good reason for doing so. You could probably call this
section Linus Computer Science 101.
1) Read Documentation/CodingStyle
Nuff said. If your code deviates too much from this, it is likely
to be rejected without further review, and without comment.
2) #ifdefs are ugly
Code cluttered with ifdefs is difficult to read and maintain. Don't do
it. Instead, put your ifdefs in a header, and conditionally define
'static inline' functions, or macros, which are used in the code.
Let the compiler optimize away the "no-op" case.
Simple example, of poor code:
dev = alloc_etherdev (sizeof(struct funky_private));
if (!dev)
return -ENODEV;
#ifdef CONFIG_NET_FUNKINESS
init_funky_net(dev);
#endif
Cleaned-up example:
(in header)
#ifndef CONFIG_NET_FUNKINESS
static inline void init_funky_net (struct net_device *d) {}
#endif
(in the code itself)
dev = alloc_etherdev (sizeof(struct funky_private));
if (!dev)
return -ENODEV;
init_funky_net(dev);
3) 'static inline' is better than a macro
Static inline functions are greatly preferred over macros.
They provide type safety, have no length limitations, no formatting
limitations, and under gcc they are as cheap as macros.
Macros should only be used for cases where a static inline is clearly
suboptimal [there a few, isolated cases of this in fast paths],
or where it is impossible to use a static inline function [such as
string-izing].
'static inline' is preferred over 'static __inline__', 'extern inline',
and 'extern __inline__'.
4) Don't over-design.
Don't try to anticipate nebulous future cases which may or may not
be useful: "Make it as simple as you can, and no simpler."
----------------------
SECTION 3 - REFERENCES
----------------------
Andrew Morton, "The perfect patch" (tpp).
<http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
Jeff Garzik, "Linux kernel patch submission format."
<http://linux.yyz.us/patch-format.html>
Greg Kroah, "How to piss off a kernel subsystem maintainer".
<http://www.kroah.com/log/2005/03/31/>
<http://www.kroah.com/log/2005/07/08/>
<http://www.kroah.com/log/2005/10/19/>
NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!.
<http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2>
Kernel Documentation/CodingStyle
<http://sosdg.org/~coywolf/lxr/source/Documentation/CodingStyle>
Linus Torvald's mail on the canonical patch format:
<http://lkml.org/lkml/2005/4/7/183>
--
Last updated on 17 Nov 2005.
View Git Blame Copy Permalink