AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
d1665e4142
kernel_optimize_test/drivers/video/tgafb.c
Antonino A. Daplas c465e05a03 [PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbcon 
According to Jon Smirl, filling in the field fb_cursor with soft_cursor for
drivers that do not support hardware cursors is redundant.  The soft_cursor
function is usable by all drivers because it is just a wrapper around
fb_imageblit.  And because soft_cursor is an fbcon-specific hook, the file is
moved to the console directory.

Thus, drivers that do not support hardware cursors can leave the fb_cursor
field blank.  For drivers that do, they can fill up this field with their own
version.

The end result is a smaller code size.  And if the framebuffer console is not
loaded, module/kernel size is also reduced because the soft_cursor module will
also not be loaded.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:50 -08:00

1555 lines
42 KiB
C
Raw Blame History

/*
* linux/drivers/video/tgafb.c -- DEC 21030 TGA frame buffer device
*
* Copyright (C) 1995 Jay Estabrook
* Copyright (C) 1997 Geert Uytterhoeven
* Copyright (C) 1999,2000 Martin Lucina, Tom Zerucha
* Copyright (C) 2002 Richard Henderson
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/selection.h>
#include <asm/io.h>
#include <video/tgafb.h>
#include <linux/selection.h>
/*
* Local functions.
*/
static int tgafb_check_var(struct fb_var_screeninfo *, struct fb_info *);
static int tgafb_set_par(struct fb_info *);
static void tgafb_set_pll(struct tga_par *, int);
static int tgafb_setcolreg(unsigned, unsigned, unsigned, unsigned,
unsigned, struct fb_info *);
static int tgafb_blank(int, struct fb_info *);
static void tgafb_init_fix(struct fb_info *);
static void tgafb_imageblit(struct fb_info *, const struct fb_image *);
static void tgafb_fillrect(struct fb_info *, const struct fb_fillrect *);
static void tgafb_copyarea(struct fb_info *, const struct fb_copyarea *);
static int tgafb_pci_register(struct pci_dev *, const struct pci_device_id *);
static void tgafb_pci_unregister(struct pci_dev *);
static const char *mode_option = "640x480@60";
/*
* Frame buffer operations
*/
static struct fb_ops tgafb_ops = {
.owner = THIS_MODULE,
.fb_check_var = tgafb_check_var,
.fb_set_par = tgafb_set_par,
.fb_setcolreg = tgafb_setcolreg,
.fb_blank = tgafb_blank,
.fb_fillrect = tgafb_fillrect,
.fb_copyarea = tgafb_copyarea,
.fb_imageblit = tgafb_imageblit,
};
/*
* PCI registration operations
*/
static struct pci_device_id const tgafb_pci_table[] = {
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TGA, PCI_ANY_ID, PCI_ANY_ID,
0, 0, 0 }
};
static struct pci_driver tgafb_driver = {
.name = "tgafb",
.id_table = tgafb_pci_table,
.probe = tgafb_pci_register,
.remove = __devexit_p(tgafb_pci_unregister),
};
/**
* tgafb_check_var - Optional function. Validates a var passed in.
* @var: frame buffer variable screen structure
* @info: frame buffer structure that represents a single frame buffer
*/
static int
tgafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct tga_par *par = (struct tga_par *)info->par;
if (par->tga_type == TGA_TYPE_8PLANE) {
if (var->bits_per_pixel != 8)
return -EINVAL;
} else {
if (var->bits_per_pixel != 32)
return -EINVAL;
}
if (var->xres_virtual != var->xres || var->yres_virtual != var->yres)
return -EINVAL;
if (var->nonstd)
return -EINVAL;
if (1000000000 / var->pixclock > TGA_PLL_MAX_FREQ)
return -EINVAL;
if ((var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
return -EINVAL;
/* Some of the acceleration routines assume the line width is
a multiple of 64 bytes. */
if (var->xres * (par->tga_type == TGA_TYPE_8PLANE ? 1 : 4) % 64)
return -EINVAL;
return 0;
}
/**
* tgafb_set_par - Optional function. Alters the hardware state.
* @info: frame buffer structure that represents a single frame buffer
*/
static int
tgafb_set_par(struct fb_info *info)
{
static unsigned int const deep_presets[4] = {
0x00014000,
0x0001440d,
0xffffffff,
0x0001441d
};
static unsigned int const rasterop_presets[4] = {
0x00000003,
0x00000303,
0xffffffff,
0x00000303
};
static unsigned int const mode_presets[4] = {
0x00002000,
0x00002300,
0xffffffff,
0x00002300
};
static unsigned int const base_addr_presets[4] = {
0x00000000,
0x00000001,
0xffffffff,
0x00000001
};
struct tga_par *par = (struct tga_par *) info->par;
u32 htimings, vtimings, pll_freq;
u8 tga_type;
int i, j;
/* Encode video timings. */
htimings = (((info->var.xres/4) & TGA_HORIZ_ACT_LSB)
| (((info->var.xres/4) & 0x600 << 19) & TGA_HORIZ_ACT_MSB));
vtimings = (info->var.yres & TGA_VERT_ACTIVE);
htimings |= ((info->var.right_margin/4) << 9) & TGA_HORIZ_FP;
vtimings |= (info->var.lower_margin << 11) & TGA_VERT_FP;
htimings |= ((info->var.hsync_len/4) << 14) & TGA_HORIZ_SYNC;
vtimings |= (info->var.vsync_len << 16) & TGA_VERT_SYNC;
htimings |= ((info->var.left_margin/4) << 21) & TGA_HORIZ_BP;
vtimings |= (info->var.upper_margin << 22) & TGA_VERT_BP;
if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
htimings |= TGA_HORIZ_POLARITY;
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
vtimings |= TGA_VERT_POLARITY;
par->htimings = htimings;
par->vtimings = vtimings;
par->sync_on_green = !!(info->var.sync & FB_SYNC_ON_GREEN);
/* Store other useful values in par. */
par->xres = info->var.xres;
par->yres = info->var.yres;
par->pll_freq = pll_freq = 1000000000 / info->var.pixclock;
par->bits_per_pixel = info->var.bits_per_pixel;
tga_type = par->tga_type;
/* First, disable video. */
TGA_WRITE_REG(par, TGA_VALID_VIDEO | TGA_VALID_BLANK, TGA_VALID_REG);
/* Write the DEEP register. */
while (TGA_READ_REG(par, TGA_CMD_STAT_REG) & 1) /* wait for not busy */
continue;
mb();
TGA_WRITE_REG(par, deep_presets[tga_type], TGA_DEEP_REG);
while (TGA_READ_REG(par, TGA_CMD_STAT_REG) & 1) /* wait for not busy */
continue;
mb();
/* Write some more registers. */
TGA_WRITE_REG(par, rasterop_presets[tga_type], TGA_RASTEROP_REG);
TGA_WRITE_REG(par, mode_presets[tga_type], TGA_MODE_REG);
TGA_WRITE_REG(par, base_addr_presets[tga_type], TGA_BASE_ADDR_REG);
/* Calculate & write the PLL. */
tgafb_set_pll(par, pll_freq);
/* Write some more registers. */
TGA_WRITE_REG(par, 0xffffffff, TGA_PLANEMASK_REG);
TGA_WRITE_REG(par, 0xffffffff, TGA_PIXELMASK_REG);
/* Init video timing regs. */
TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vtimings, TGA_VERT_REG);
/* Initalise RAMDAC. */
if (tga_type == TGA_TYPE_8PLANE) {
/* Init BT485 RAMDAC registers. */
BT485_WRITE(par, 0xa2 | (par->sync_on_green ? 0x8 : 0x0),
BT485_CMD_0);
BT485_WRITE(par, 0x01, BT485_ADDR_PAL_WRITE);
BT485_WRITE(par, 0x14, BT485_CMD_3); /* cursor 64x64 */
BT485_WRITE(par, 0x40, BT485_CMD_1);
BT485_WRITE(par, 0x20, BT485_CMD_2); /* cursor off, for now */
BT485_WRITE(par, 0xff, BT485_PIXEL_MASK);
/* Fill palette registers. */
BT485_WRITE(par, 0x00, BT485_ADDR_PAL_WRITE);
TGA_WRITE_REG(par, BT485_DATA_PAL, TGA_RAMDAC_SETUP_REG);
for (i = 0; i < 16; i++) {
j = color_table[i];
TGA_WRITE_REG(par, default_red[j]|(BT485_DATA_PAL<<8),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, default_grn[j]|(BT485_DATA_PAL<<8),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, default_blu[j]|(BT485_DATA_PAL<<8),
TGA_RAMDAC_REG);
}
for (i = 0; i < 240*3; i += 4) {
TGA_WRITE_REG(par, 0x55|(BT485_DATA_PAL<<8),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00|(BT485_DATA_PAL<<8),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00|(BT485_DATA_PAL<<8),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00|(BT485_DATA_PAL<<8),
TGA_RAMDAC_REG);
}
} else { /* 24-plane or 24plusZ */
/* Init BT463 registers. */
BT463_WRITE(par, BT463_REG_ACC, BT463_CMD_REG_0, 0x40);
BT463_WRITE(par, BT463_REG_ACC, BT463_CMD_REG_1, 0x08);
BT463_WRITE(par, BT463_REG_ACC, BT463_CMD_REG_2,
(par->sync_on_green ? 0x80 : 0x40));
BT463_WRITE(par, BT463_REG_ACC, BT463_READ_MASK_0, 0xff);
BT463_WRITE(par, BT463_REG_ACC, BT463_READ_MASK_1, 0xff);
BT463_WRITE(par, BT463_REG_ACC, BT463_READ_MASK_2, 0xff);
BT463_WRITE(par, BT463_REG_ACC, BT463_READ_MASK_3, 0x0f);
BT463_WRITE(par, BT463_REG_ACC, BT463_BLINK_MASK_0, 0x00);
BT463_WRITE(par, BT463_REG_ACC, BT463_BLINK_MASK_1, 0x00);
BT463_WRITE(par, BT463_REG_ACC, BT463_BLINK_MASK_2, 0x00);
BT463_WRITE(par, BT463_REG_ACC, BT463_BLINK_MASK_3, 0x00);
/* Fill the palette. */
BT463_LOAD_ADDR(par, 0x0000);
TGA_WRITE_REG(par, BT463_PALETTE<<2, TGA_RAMDAC_REG);
for (i = 0; i < 16; i++) {
j = color_table[i];
TGA_WRITE_REG(par, default_red[j]|(BT463_PALETTE<<10),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, default_grn[j]|(BT463_PALETTE<<10),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, default_blu[j]|(BT463_PALETTE<<10),
TGA_RAMDAC_REG);
}
for (i = 0; i < 512*3; i += 4) {
TGA_WRITE_REG(par, 0x55|(BT463_PALETTE<<10),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00|(BT463_PALETTE<<10),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00|(BT463_PALETTE<<10),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00|(BT463_PALETTE<<10),
TGA_RAMDAC_REG);
}
/* Fill window type table after start of vertical retrace. */
while (!(TGA_READ_REG(par, TGA_INTR_STAT_REG) & 0x01))
continue;
TGA_WRITE_REG(par, 0x01, TGA_INTR_STAT_REG);
mb();
while (!(TGA_READ_REG(par, TGA_INTR_STAT_REG) & 0x01))
continue;
TGA_WRITE_REG(par, 0x01, TGA_INTR_STAT_REG);
BT463_LOAD_ADDR(par, BT463_WINDOW_TYPE_BASE);
TGA_WRITE_REG(par, BT463_REG_ACC<<2, TGA_RAMDAC_SETUP_REG);
for (i = 0; i < 16; i++) {
TGA_WRITE_REG(par, 0x00|(BT463_REG_ACC<<10),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x01|(BT463_REG_ACC<<10),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x80|(BT463_REG_ACC<<10),
TGA_RAMDAC_REG);
}
}
/* Finally, enable video scan (and pray for the monitor... :-) */
TGA_WRITE_REG(par, TGA_VALID_VIDEO, TGA_VALID_REG);
return 0;
}
#define DIFFCHECK(X) \
do { \
if (m <= 0x3f) { \
int delta = f - (TGA_PLL_BASE_FREQ * (X)) / (r << shift); \
if (delta < 0) \
delta = -delta; \
if (delta < min_diff) \
min_diff = delta, vm = m, va = a, vr = r; \
} \
} while (0)
static void
tgafb_set_pll(struct tga_par *par, int f)
{
int n, shift, base, min_diff, target;
int r,a,m,vm = 34, va = 1, vr = 30;
for (r = 0 ; r < 12 ; r++)
TGA_WRITE_REG(par, !r, TGA_CLOCK_REG);
if (f > TGA_PLL_MAX_FREQ)
f = TGA_PLL_MAX_FREQ;
if (f >= TGA_PLL_MAX_FREQ / 2)
shift = 0;
else if (f >= TGA_PLL_MAX_FREQ / 4)
shift = 1;
else
shift = 2;
TGA_WRITE_REG(par, shift & 1, TGA_CLOCK_REG);
TGA_WRITE_REG(par, shift >> 1, TGA_CLOCK_REG);
for (r = 0 ; r < 10 ; r++)
TGA_WRITE_REG(par, 0, TGA_CLOCK_REG);
if (f <= 120000) {
TGA_WRITE_REG(par, 0, TGA_CLOCK_REG);
TGA_WRITE_REG(par, 0, TGA_CLOCK_REG);
}
else if (f <= 200000) {
TGA_WRITE_REG(par, 1, TGA_CLOCK_REG);
TGA_WRITE_REG(par, 0, TGA_CLOCK_REG);
}
else {
TGA_WRITE_REG(par, 0, TGA_CLOCK_REG);
TGA_WRITE_REG(par, 1, TGA_CLOCK_REG);
}
TGA_WRITE_REG(par, 1, TGA_CLOCK_REG);
TGA_WRITE_REG(par, 0, TGA_CLOCK_REG);
TGA_WRITE_REG(par, 0, TGA_CLOCK_REG);
TGA_WRITE_REG(par, 1, TGA_CLOCK_REG);
TGA_WRITE_REG(par, 0, TGA_CLOCK_REG);
TGA_WRITE_REG(par, 1, TGA_CLOCK_REG);
target = (f << shift) / TGA_PLL_BASE_FREQ;
min_diff = TGA_PLL_MAX_FREQ;
r = 7 / target;
if (!r) r = 1;
base = target * r;
while (base < 449) {
for (n = base < 7 ? 7 : base; n < base + target && n < 449; n++) {
m = ((n + 3) / 7) - 1;
a = 0;
DIFFCHECK((m + 1) * 7);
m++;
DIFFCHECK((m + 1) * 7);
m = (n / 6) - 1;
if ((a = n % 6))
DIFFCHECK(n);
}
r++;
base += target;
}
vr--;
for (r = 0; r < 8; r++)
TGA_WRITE_REG(par, (vm >> r) & 1, TGA_CLOCK_REG);
for (r = 0; r < 8 ; r++)
TGA_WRITE_REG(par, (va >> r) & 1, TGA_CLOCK_REG);
for (r = 0; r < 7 ; r++)
TGA_WRITE_REG(par, (vr >> r) & 1, TGA_CLOCK_REG);
TGA_WRITE_REG(par, ((vr >> 7) & 1)|2, TGA_CLOCK_REG);
}
/**
* tgafb_setcolreg - Optional function. Sets a color register.
* @regno: boolean, 0 copy local, 1 get_user() function
* @red: frame buffer colormap structure
* @green: The green value which can be up to 16 bits wide
* @blue: The blue value which can be up to 16 bits wide.
* @transp: If supported the alpha value which can be up to 16 bits wide.
* @info: frame buffer info structure
*/
static int
tgafb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
unsigned transp, struct fb_info *info)
{
struct tga_par *par = (struct tga_par *) info->par;
if (regno > 255)
return 1;
red >>= 8;
green >>= 8;
blue >>= 8;
if (par->tga_type == TGA_TYPE_8PLANE) {
BT485_WRITE(par, regno, BT485_ADDR_PAL_WRITE);
TGA_WRITE_REG(par, BT485_DATA_PAL, TGA_RAMDAC_SETUP_REG);
TGA_WRITE_REG(par, red|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG);
TGA_WRITE_REG(par, green|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG);
TGA_WRITE_REG(par, blue|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG);
} else if (regno < 16) {
u32 value = (red << 16) | (green << 8) | blue;
((u32 *)info->pseudo_palette)[regno] = value;
}
return 0;
}
/**
* tgafb_blank - Optional function. Blanks the display.
* @blank_mode: the blank mode we want.
* @info: frame buffer structure that represents a single frame buffer
*/
static int
tgafb_blank(int blank, struct fb_info *info)
{
struct tga_par *par = (struct tga_par *) info->par;
u32 vhcr, vvcr, vvvr;
unsigned long flags;
local_irq_save(flags);
vhcr = TGA_READ_REG(par, TGA_HORIZ_REG);
vvcr = TGA_READ_REG(par, TGA_VERT_REG);
vvvr = TGA_READ_REG(par, TGA_VALID_REG);
vvvr &= ~(TGA_VALID_VIDEO | TGA_VALID_BLANK);
switch (blank) {
case FB_BLANK_UNBLANK: /* Unblanking */
if (par->vesa_blanked) {
TGA_WRITE_REG(par, vhcr & 0xbfffffff, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vvcr & 0xbfffffff, TGA_VERT_REG);
par->vesa_blanked = 0;
}
TGA_WRITE_REG(par, vvvr | TGA_VALID_VIDEO, TGA_VALID_REG);
break;
case FB_BLANK_NORMAL: /* Normal blanking */
TGA_WRITE_REG(par, vvvr | TGA_VALID_VIDEO | TGA_VALID_BLANK,
TGA_VALID_REG);
break;
case FB_BLANK_VSYNC_SUSPEND: /* VESA blank (vsync off) */
TGA_WRITE_REG(par, vvcr | 0x40000000, TGA_VERT_REG);
TGA_WRITE_REG(par, vvvr | TGA_VALID_BLANK, TGA_VALID_REG);
par->vesa_blanked = 1;
break;
case FB_BLANK_HSYNC_SUSPEND: /* VESA blank (hsync off) */
TGA_WRITE_REG(par, vhcr | 0x40000000, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vvvr | TGA_VALID_BLANK, TGA_VALID_REG);
par->vesa_blanked = 1;
break;
case FB_BLANK_POWERDOWN: /* Poweroff */
TGA_WRITE_REG(par, vhcr | 0x40000000, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vvcr | 0x40000000, TGA_VERT_REG);
TGA_WRITE_REG(par, vvvr | TGA_VALID_BLANK, TGA_VALID_REG);
par->vesa_blanked = 1;
break;
}
local_irq_restore(flags);
return 0;
}
/*
* Acceleration.
*/
/**
* tgafb_imageblit - REQUIRED function. Can use generic routines if
* non acclerated hardware and packed pixel based.
* Copies a image from system memory to the screen.
*
* @info: frame buffer structure that represents a single frame buffer
* @image: structure defining the image.
*/
static void
tgafb_imageblit(struct fb_info *info, const struct fb_image *image)
{
static unsigned char const bitrev[256] = {
0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff
};
struct tga_par *par = (struct tga_par *) info->par;
u32 fgcolor, bgcolor, dx, dy, width, height, vxres, vyres, pixelmask;
unsigned long rincr, line_length, shift, pos, is8bpp;
unsigned long i, j;
const unsigned char *data;
void __iomem *regs_base;
void __iomem *fb_base;
dx = image->dx;
dy = image->dy;
width = image->width;
height = image->height;
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
line_length = info->fix.line_length;
rincr = (width + 7) / 8;
/* Crop the image to the screen. */
if (dx > vxres || dy > vyres)
return;
if (dx + width > vxres)
width = vxres - dx;
if (dy + height > vyres)
height = vyres - dy;
/* For copies that aren't pixel expansion, there's little we
can do better than the generic code. */
/* ??? There is a DMA write mode; I wonder if that could be
made to pull the data from the image buffer... */
if (image->depth > 1) {
cfb_imageblit(info, image);
return;
}
regs_base = par->tga_regs_base;
fb_base = par->tga_fb_base;
is8bpp = info->var.bits_per_pixel == 8;
/* Expand the color values to fill 32-bits. */
/* ??? Would be nice to notice colour changes elsewhere, so
that we can do this only when necessary. */
fgcolor = image->fg_color;
bgcolor = image->bg_color;
if (is8bpp) {
fgcolor |= fgcolor << 8;
fgcolor |= fgcolor << 16;
bgcolor |= bgcolor << 8;
bgcolor |= bgcolor << 16;
} else {
if (fgcolor < 16)
fgcolor = ((u32 *)info->pseudo_palette)[fgcolor];
if (bgcolor < 16)
bgcolor = ((u32 *)info->pseudo_palette)[bgcolor];
}
__raw_writel(fgcolor, regs_base + TGA_FOREGROUND_REG);
__raw_writel(bgcolor, regs_base + TGA_BACKGROUND_REG);
/* Acquire proper alignment; set up the PIXELMASK register
so that we only write the proper character cell. */
pos = dy * line_length;
if (is8bpp) {
pos += dx;
shift = pos & 3;
pos &= -4;
} else {
pos += dx * 4;
shift = (pos & 7) >> 2;
pos &= -8;
}
data = (const unsigned char *) image->data;
/* Enable opaque stipple mode. */
__raw_writel((is8bpp
? TGA_MODE_SBM_8BPP | TGA_MODE_OPAQUE_STIPPLE
: TGA_MODE_SBM_24BPP | TGA_MODE_OPAQUE_STIPPLE),
regs_base + TGA_MODE_REG);
if (width + shift <= 32) {
unsigned long bwidth;
/* Handle common case of imaging a single character, in
a font less than 32 pixels wide. */
pixelmask = (1 << width) - 1;
pixelmask <<= shift;
__raw_writel(pixelmask, regs_base + TGA_PIXELMASK_REG);
wmb();
bwidth = (width + 7) / 8;
for (i = 0; i < height; ++i) {
u32 mask = 0;
/* The image data is bit big endian; we need
little endian. */
for (j = 0; j < bwidth; ++j)
mask |= bitrev[data[j]] << (j * 8);
__raw_writel(mask << shift, fb_base + pos);
pos += line_length;
data += rincr;
}
wmb();
__raw_writel(0xffffffff, regs_base + TGA_PIXELMASK_REG);
} else if (shift == 0) {
unsigned long pos0 = pos;
const unsigned char *data0 = data;
unsigned long bincr = (is8bpp ? 8 : 8*4);
unsigned long bwidth;
/* Handle another common case in which accel_putcs
generates a large bitmap, which happens to be aligned.
Allow the tail to be misaligned. This case is
interesting because we've not got to hold partial
bytes across the words being written. */
wmb();
bwidth = (width / 8) & -4;
for (i = 0; i < height; ++i) {
for (j = 0; j < bwidth; j += 4) {
u32 mask = 0;
mask |= bitrev[data[j+0]] << (0 * 8);
mask |= bitrev[data[j+1]] << (1 * 8);
mask |= bitrev[data[j+2]] << (2 * 8);
mask |= bitrev[data[j+3]] << (3 * 8);
__raw_writel(mask, fb_base + pos + j*bincr);
}
pos += line_length;
data += rincr;
}
wmb();
pixelmask = (1ul << (width & 31)) - 1;
if (pixelmask) {
__raw_writel(pixelmask, regs_base + TGA_PIXELMASK_REG);
wmb();
pos = pos0 + bwidth*bincr;
data = data0 + bwidth;
bwidth = ((width & 31) + 7) / 8;
for (i = 0; i < height; ++i) {
u32 mask = 0;
for (j = 0; j < bwidth; ++j)
mask |= bitrev[data[j]] << (j * 8);
__raw_writel(mask, fb_base + pos);
pos += line_length;
data += rincr;
}
wmb();
__raw_writel(0xffffffff, regs_base + TGA_PIXELMASK_REG);
}
} else {
unsigned long pos0 = pos;
const unsigned char *data0 = data;
unsigned long bincr = (is8bpp ? 8 : 8*4);
unsigned long bwidth;
/* Finally, handle the generic case of misaligned start.
Here we split the write into 16-bit spans. This allows
us to use only one pixel mask, instead of four as would
be required by writing 24-bit spans. */
pixelmask = 0xffff << shift;
__raw_writel(pixelmask, regs_base + TGA_PIXELMASK_REG);
wmb();
bwidth = (width / 8) & -2;
for (i = 0; i < height; ++i) {
for (j = 0; j < bwidth; j += 2) {
u32 mask = 0;
mask |= bitrev[data[j+0]] << (0 * 8);
mask |= bitrev[data[j+1]] << (1 * 8);
mask <<= shift;
__raw_writel(mask, fb_base + pos + j*bincr);
}
pos += line_length;
data += rincr;
}
wmb();
pixelmask = ((1ul << (width & 15)) - 1) << shift;
if (pixelmask) {
__raw_writel(pixelmask, regs_base + TGA_PIXELMASK_REG);
wmb();
pos = pos0 + bwidth*bincr;
data = data0 + bwidth;
bwidth = (width & 15) > 8;
for (i = 0; i < height; ++i) {
u32 mask = bitrev[data[0]];
if (bwidth)
mask |= bitrev[data[1]] << 8;
mask <<= shift;
__raw_writel(mask, fb_base + pos);
pos += line_length;
data += rincr;
}
wmb();
}
__raw_writel(0xffffffff, regs_base + TGA_PIXELMASK_REG);
}
/* Disable opaque stipple mode. */
__raw_writel((is8bpp
? TGA_MODE_SBM_8BPP | TGA_MODE_SIMPLE
: TGA_MODE_SBM_24BPP | TGA_MODE_SIMPLE),
regs_base + TGA_MODE_REG);
}
/**
* tgafb_fillrect - REQUIRED function. Can use generic routines if
* non acclerated hardware and packed pixel based.
* Draws a rectangle on the screen.
*
* @info: frame buffer structure that represents a single frame buffer
* @rect: structure defining the rectagle and operation.
*/
static void
tgafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct tga_par *par = (struct tga_par *) info->par;
int is8bpp = info->var.bits_per_pixel == 8;
u32 dx, dy, width, height, vxres, vyres, color;
unsigned long pos, align, line_length, i, j;
void __iomem *regs_base;
void __iomem *fb_base;
dx = rect->dx;
dy = rect->dy;
width = rect->width;
height = rect->height;
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
line_length = info->fix.line_length;
regs_base = par->tga_regs_base;
fb_base = par->tga_fb_base;
/* Crop the rectangle to the screen. */
if (dx > vxres || dy > vyres || !width || !height)
return;
if (dx + width > vxres)
width = vxres - dx;
if (dy + height > vyres)
height = vyres - dy;
pos = dy * line_length + dx * (is8bpp ? 1 : 4);
/* ??? We could implement ROP_XOR with opaque fill mode
and a RasterOp setting of GXxor, but as far as I can
tell, this mode is not actually used in the kernel.
Thus I am ignoring it for now. */
if (rect->rop != ROP_COPY) {
cfb_fillrect(info, rect);
return;
}
/* Expand the color value to fill 8 pixels. */
color = rect->color;
if (is8bpp) {
color |= color << 8;
color |= color << 16;
__raw_writel(color, regs_base + TGA_BLOCK_COLOR0_REG);
__raw_writel(color, regs_base + TGA_BLOCK_COLOR1_REG);
} else {
if (color < 16)
color = ((u32 *)info->pseudo_palette)[color];
__raw_writel(color, regs_base + TGA_BLOCK_COLOR0_REG);
__raw_writel(color, regs_base + TGA_BLOCK_COLOR1_REG);
__raw_writel(color, regs_base + TGA_BLOCK_COLOR2_REG);
__raw_writel(color, regs_base + TGA_BLOCK_COLOR3_REG);
__raw_writel(color, regs_base + TGA_BLOCK_COLOR4_REG);
__raw_writel(color, regs_base + TGA_BLOCK_COLOR5_REG);
__raw_writel(color, regs_base + TGA_BLOCK_COLOR6_REG);
__raw_writel(color, regs_base + TGA_BLOCK_COLOR7_REG);
}
/* The DATA register holds the fill mask for block fill mode.
Since we're not stippling, this is all ones. */
__raw_writel(0xffffffff, regs_base + TGA_DATA_REG);
/* Enable block fill mode. */
__raw_writel((is8bpp
? TGA_MODE_SBM_8BPP | TGA_MODE_BLOCK_FILL
: TGA_MODE_SBM_24BPP | TGA_MODE_BLOCK_FILL),
regs_base + TGA_MODE_REG);
wmb();
/* We can fill 2k pixels per operation. Notice blocks that fit
the width of the screen so that we can take advantage of this
and fill more than one line per write. */
if (width == line_length)
width *= height, height = 1;
/* The write into the frame buffer must be aligned to 4 bytes,
but we are allowed to encode the offset within the word in
the data word written. */
align = (pos & 3) << 16;
pos &= -4;
if (width <= 2048) {
u32 data;
data = (width - 1) | align;
for (i = 0; i < height; ++i) {
__raw_writel(data, fb_base + pos);
pos += line_length;
}
} else {
unsigned long Bpp = (is8bpp ? 1 : 4);
unsigned long nwidth = width & -2048;
u32 fdata, ldata;
fdata = (2048 - 1) | align;
ldata = ((width & 2047) - 1) | align;
for (i = 0; i < height; ++i) {
for (j = 0; j < nwidth; j += 2048)
__raw_writel(fdata, fb_base + pos + j*Bpp);
if (j < width)
__raw_writel(ldata, fb_base + pos + j*Bpp);
pos += line_length;
}
}
wmb();
/* Disable block fill mode. */
__raw_writel((is8bpp
? TGA_MODE_SBM_8BPP | TGA_MODE_SIMPLE
: TGA_MODE_SBM_24BPP | TGA_MODE_SIMPLE),
regs_base + TGA_MODE_REG);
}
/**
* tgafb_copyarea - REQUIRED function. Can use generic routines if
* non acclerated hardware and packed pixel based.
* Copies on area of the screen to another area.
*
* @info: frame buffer structure that represents a single frame buffer
* @area: structure defining the source and destination.
*/
/* Handle the special case of copying entire lines, e.g. during scrolling.
We can avoid a lot of needless computation in this case. In the 8bpp
case we need to use the COPY64 registers instead of mask writes into
the frame buffer to achieve maximum performance. */
static inline void
copyarea_line_8bpp(struct fb_info *info, u32 dy, u32 sy,
u32 height, u32 width)
{
struct tga_par *par = (struct tga_par *) info->par;
void __iomem *tga_regs = par->tga_regs_base;
unsigned long dpos, spos, i, n64;
/* Set up the MODE and PIXELSHIFT registers. */
__raw_writel(TGA_MODE_SBM_8BPP | TGA_MODE_COPY, tga_regs+TGA_MODE_REG);
__raw_writel(0, tga_regs+TGA_PIXELSHIFT_REG);
wmb();
n64 = (height * width) / 64;
if (dy < sy) {
spos = (sy + height) * width;
dpos = (dy + height) * width;
for (i = 0; i < n64; ++i) {
spos -= 64;
dpos -= 64;
__raw_writel(spos, tga_regs+TGA_COPY64_SRC);
wmb();
__raw_writel(dpos, tga_regs+TGA_COPY64_DST);
wmb();
}
} else {
spos = sy * width;
dpos = dy * width;
for (i = 0; i < n64; ++i) {
__raw_writel(spos, tga_regs+TGA_COPY64_SRC);
wmb();
__raw_writel(dpos, tga_regs+TGA_COPY64_DST);
wmb();
spos += 64;
dpos += 64;
}
}
/* Reset the MODE register to normal. */
__raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG);
}
static inline void
copyarea_line_32bpp(struct fb_info *info, u32 dy, u32 sy,
u32 height, u32 width)
{
struct tga_par *par = (struct tga_par *) info->par;
void __iomem *tga_regs = par->tga_regs_base;
void __iomem *tga_fb = par->tga_fb_base;
void __iomem *src;
void __iomem *dst;
unsigned long i, n16;
/* Set up the MODE and PIXELSHIFT registers. */
__raw_writel(TGA_MODE_SBM_24BPP | TGA_MODE_COPY, tga_regs+TGA_MODE_REG);
__raw_writel(0, tga_regs+TGA_PIXELSHIFT_REG);
wmb();
n16 = (height * width) / 16;
if (dy < sy) {
src = tga_fb + (sy + height) * width * 4;
dst = tga_fb + (dy + height) * width * 4;
for (i = 0; i < n16; ++i) {
src -= 64;
dst -= 64;
__raw_writel(0xffff, src);
wmb();
__raw_writel(0xffff, dst);
wmb();
}
} else {
src = tga_fb + sy * width * 4;
dst = tga_fb + dy * width * 4;
for (i = 0; i < n16; ++i) {
__raw_writel(0xffff, src);
wmb();
__raw_writel(0xffff, dst);
wmb();
src += 64;
dst += 64;
}
}
/* Reset the MODE register to normal. */
__raw_writel(TGA_MODE_SBM_24BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG);
}
/* The general case of forward copy in 8bpp mode. */
static inline void
copyarea_foreward_8bpp(struct fb_info *info, u32 dx, u32 dy, u32 sx, u32 sy,
u32 height, u32 width, u32 line_length)
{
struct tga_par *par = (struct tga_par *) info->par;
unsigned long i, copied, left;
unsigned long dpos, spos, dalign, salign, yincr;
u32 smask_first, dmask_first, dmask_last;
int pixel_shift, need_prime, need_second;
unsigned long n64, n32, xincr_first;
void __iomem *tga_regs;
void __iomem *tga_fb;
yincr = line_length;
if (dy > sy) {
dy += height - 1;
sy += height - 1;
yincr = -yincr;
}
/* Compute the offsets and alignments in the frame buffer.
More than anything else, these control how we do copies. */
dpos = dy * line_length + dx;
spos = sy * line_length + sx;
dalign = dpos & 7;
salign = spos & 7;
dpos &= -8;
spos &= -8;
/* Compute the value for the PIXELSHIFT register. This controls
both non-co-aligned source and destination and copy direction. */
if (dalign >= salign)
pixel_shift = dalign - salign;
else
pixel_shift = 8 - (salign - dalign);
/* Figure out if we need an additional priming step for the
residue register. */
need_prime = (salign > dalign);
if (need_prime)
dpos -= 8;
/* Begin by copying the leading unaligned destination. Copy enough
to make the next destination address 32-byte aligned. */
copied = 32 - (dalign + (dpos & 31));
if (copied == 32)
copied = 0;
xincr_first = (copied + 7) & -8;
smask_first = dmask_first = (1ul << copied) - 1;
smask_first <<= salign;
dmask_first <<= dalign + need_prime*8;
if (need_prime && copied > 24)
copied -= 8;
left = width - copied;
/* Care for small copies. */
if (copied > width) {
u32 t;
t = (1ul << width) - 1;
t <<= dalign + need_prime*8;
dmask_first &= t;
left = 0;
}
/* Attempt to use 64-byte copies. This is only possible if the
source and destination are co-aligned at 64 bytes. */
n64 = need_second = 0;
if ((dpos & 63) == (spos & 63)
&& (height == 1 || line_length % 64 == 0)) {
/* We may need a 32-byte copy to ensure 64 byte alignment. */
need_second = (dpos + xincr_first) & 63;
if ((need_second & 32) != need_second)
printk(KERN_ERR "tgafb: need_second wrong\n");
if (left >= need_second + 64) {
left -= need_second;
n64 = left / 64;
left %= 64;
} else
need_second = 0;
}
/* Copy trailing full 32-byte sections. This will be the main
loop if the 64 byte loop can't be used. */
n32 = left / 32;
left %= 32;
/* Copy the trailing unaligned destination. */
dmask_last = (1ul << left) - 1;
tga_regs = par->tga_regs_base;
tga_fb = par->tga_fb_base;
/* Set up the MODE and PIXELSHIFT registers. */
__raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_COPY, tga_regs+TGA_MODE_REG);
__raw_writel(pixel_shift, tga_regs+TGA_PIXELSHIFT_REG);
wmb();
for (i = 0; i < height; ++i) {
unsigned long j;
void __iomem *sfb;
void __iomem *dfb;
sfb = tga_fb + spos;
dfb = tga_fb + dpos;
if (dmask_first) {
__raw_writel(smask_first, sfb);
wmb();
__raw_writel(dmask_first, dfb);
wmb();
sfb += xincr_first;
dfb += xincr_first;
}
if (need_second) {
__raw_writel(0xffffffff, sfb);
wmb();
__raw_writel(0xffffffff, dfb);
wmb();
sfb += 32;
dfb += 32;
}
if (n64 && (((unsigned long)sfb | (unsigned long)dfb) & 63))
printk(KERN_ERR
"tgafb: misaligned copy64 (s:%p, d:%p)\n",
sfb, dfb);
for (j = 0; j < n64; ++j) {
__raw_writel(sfb - tga_fb, tga_regs+TGA_COPY64_SRC);
wmb();
__raw_writel(dfb - tga_fb, tga_regs+TGA_COPY64_DST);
wmb();
sfb += 64;
dfb += 64;
}
for (j = 0; j < n32; ++j) {
__raw_writel(0xffffffff, sfb);
wmb();
__raw_writel(0xffffffff, dfb);
wmb();
sfb += 32;
dfb += 32;
}
if (dmask_last) {
__raw_writel(0xffffffff, sfb);
wmb();
__raw_writel(dmask_last, dfb);
wmb();
}
spos += yincr;
dpos += yincr;
}
/* Reset the MODE register to normal. */
__raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG);
}
/* The (almost) general case of backward copy in 8bpp mode. */
static inline void
copyarea_backward_8bpp(struct fb_info *info, u32 dx, u32 dy, u32 sx, u32 sy,
u32 height, u32 width, u32 line_length,
const struct fb_copyarea *area)
{
struct tga_par *par = (struct tga_par *) info->par;
unsigned long i, left, yincr;
unsigned long depos, sepos, dealign, sealign;
u32 mask_first, mask_last;
unsigned long n32;
void __iomem *tga_regs;
void __iomem *tga_fb;
yincr = line_length;
if (dy > sy) {
dy += height - 1;
sy += height - 1;
yincr = -yincr;
}
/* Compute the offsets and alignments in the frame buffer.
More than anything else, these control how we do copies. */
depos = dy * line_length + dx + width;
sepos = sy * line_length + sx + width;
dealign = depos & 7;
sealign = sepos & 7;
/* ??? The documentation appears to be incorrect (or very
misleading) wrt how pixel shifting works in backward copy
mode, i.e. when PIXELSHIFT is negative. I give up for now.
Do handle the common case of co-aligned backward copies,
but frob everything else back on generic code. */
if (dealign != sealign) {
cfb_copyarea(info, area);
return;
}
/* We begin the copy with the trailing pixels of the
unaligned destination. */
mask_first = (1ul << dealign) - 1;
left = width - dealign;
/* Care for small copies. */
if (dealign > width) {
mask_first ^= (1ul << (dealign - width)) - 1;
left = 0;
}
/* Next copy full words at a time. */
n32 = left / 32;
left %= 32;
/* Finally copy the unaligned head of the span. */
mask_last = -1 << (32 - left);
tga_regs = par->tga_regs_base;
tga_fb = par->tga_fb_base;
/* Set up the MODE and PIXELSHIFT registers. */
__raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_COPY, tga_regs+TGA_MODE_REG);
__raw_writel(0, tga_regs+TGA_PIXELSHIFT_REG);
wmb();
for (i = 0; i < height; ++i) {
unsigned long j;
void __iomem *sfb;
void __iomem *dfb;
sfb = tga_fb + sepos;
dfb = tga_fb + depos;
if (mask_first) {
__raw_writel(mask_first, sfb);
wmb();
__raw_writel(mask_first, dfb);
wmb();
}
for (j = 0; j < n32; ++j) {
sfb -= 32;
dfb -= 32;
__raw_writel(0xffffffff, sfb);
wmb();
__raw_writel(0xffffffff, dfb);
wmb();
}
if (mask_last) {
sfb -= 32;
dfb -= 32;
__raw_writel(mask_last, sfb);
wmb();
__raw_writel(mask_last, dfb);
wmb();
}
sepos += yincr;
depos += yincr;
}
/* Reset the MODE register to normal. */
__raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG);
}
static void
tgafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
{
unsigned long dx, dy, width, height, sx, sy, vxres, vyres;
unsigned long line_length, bpp;
dx = area->dx;
dy = area->dy;
width = area->width;
height = area->height;
sx = area->sx;
sy = area->sy;
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
line_length = info->fix.line_length;
/* The top left corners must be in the virtual screen. */
if (dx > vxres || sx > vxres || dy > vyres || sy > vyres)
return;
/* Clip the destination. */
if (dx + width > vxres)
width = vxres - dx;
if (dy + height > vyres)
height = vyres - dy;
/* The source must be completely inside the virtual screen. */
if (sx + width > vxres || sy + height > vyres)
return;
bpp = info->var.bits_per_pixel;
/* Detect copies of the entire line. */
if (width * (bpp >> 3) == line_length) {
if (bpp == 8)
copyarea_line_8bpp(info, dy, sy, height, width);
else
copyarea_line_32bpp(info, dy, sy, height, width);
}
/* ??? The documentation is unclear to me exactly how the pixelshift
register works in 32bpp mode. Since I don't have hardware to test,
give up for now and fall back on the generic routines. */
else if (bpp == 32)
cfb_copyarea(info, area);
/* Detect overlapping source and destination that requires
a backward copy. */
else if (dy == sy && dx > sx && dx < sx + width)
copyarea_backward_8bpp(info, dx, dy, sx, sy, height,
width, line_length, area);
else
copyarea_foreward_8bpp(info, dx, dy, sx, sy, height,
width, line_length);
}
/*
* Initialisation
*/
static void
tgafb_init_fix(struct fb_info *info)
{
struct tga_par *par = (struct tga_par *)info->par;
u8 tga_type = par->tga_type;
const char *tga_type_name;
switch (tga_type) {
case TGA_TYPE_8PLANE:
tga_type_name = "Digital ZLXp-E1";
break;
case TGA_TYPE_24PLANE:
tga_type_name = "Digital ZLXp-E2";
break;
case TGA_TYPE_24PLUSZ:
tga_type_name = "Digital ZLXp-E3";
break;
default:
tga_type_name = "Unknown";
break;
}
strlcpy(info->fix.id, tga_type_name, sizeof(info->fix.id));
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.type_aux = 0;
info->fix.visual = (tga_type == TGA_TYPE_8PLANE
? FB_VISUAL_PSEUDOCOLOR
: FB_VISUAL_TRUECOLOR);
info->fix.line_length = par->xres * (par->bits_per_pixel >> 3);
info->fix.smem_start = (size_t) par->tga_fb_base;
info->fix.smem_len = info->fix.line_length * par->yres;
info->fix.mmio_start = (size_t) par->tga_regs_base;
info->fix.mmio_len = 512;
info->fix.xpanstep = 0;
info->fix.ypanstep = 0;
info->fix.ywrapstep = 0;
info->fix.accel = FB_ACCEL_DEC_TGA;
}
static __devinit int
tgafb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static unsigned int const fb_offset_presets[4] = {
TGA_8PLANE_FB_OFFSET,
TGA_24PLANE_FB_OFFSET,
0xffffffff,
TGA_24PLUSZ_FB_OFFSET
};
struct all_info {
struct fb_info info;
struct tga_par par;
u32 pseudo_palette[16];
} *all;
void __iomem *mem_base;
unsigned long bar0_start, bar0_len;
u8 tga_type;
int ret;
/* Enable device in PCI config. */
if (pci_enable_device(pdev)) {
printk(KERN_ERR "tgafb: Cannot enable PCI device\n");
return -ENODEV;
}
/* Allocate the fb and par structures. */
all = kmalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "tgafb: Cannot allocate memory\n");
return -ENOMEM;
}
memset(all, 0, sizeof(*all));
pci_set_drvdata(pdev, all);
/* Request the mem regions. */
bar0_start = pci_resource_start(pdev, 0);
bar0_len = pci_resource_len(pdev, 0);
ret = -ENODEV;
if (!request_mem_region (bar0_start, bar0_len, "tgafb")) {
printk(KERN_ERR "tgafb: cannot reserve FB region\n");
goto err0;
}
/* Map the framebuffer. */
mem_base = ioremap(bar0_start, bar0_len);
if (!mem_base) {
printk(KERN_ERR "tgafb: Cannot map MMIO\n");
goto err1;
}
/* Grab info about the card. */
tga_type = (readl(mem_base) >> 12) & 0x0f;
all->par.pdev = pdev;
all->par.tga_mem_base = mem_base;
all->par.tga_fb_base = mem_base + fb_offset_presets[tga_type];
all->par.tga_regs_base = mem_base + TGA_REGS_OFFSET;
all->par.tga_type = tga_type;
pci_read_config_byte(pdev, PCI_REVISION_ID, &all->par.tga_chip_rev);
/* Setup framebuffer. */
all->info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_FILLRECT;
all->info.fbops = &tgafb_ops;
all->info.screen_base = all->par.tga_fb_base;
all->info.par = &all->par;
all->info.pseudo_palette = all->pseudo_palette;
/* This should give a reasonable default video mode. */
ret = fb_find_mode(&all->info.var, &all->info, mode_option,
NULL, 0, NULL,
tga_type == TGA_TYPE_8PLANE ? 8 : 32);
if (ret == 0 || ret == 4) {
printk(KERN_ERR "tgafb: Could not find valid video mode\n");
ret = -EINVAL;
goto err1;
}
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
printk(KERN_ERR "tgafb: Could not allocate color map\n");
ret = -ENOMEM;
goto err1;
}
tgafb_set_par(&all->info);
tgafb_init_fix(&all->info);
all->info.device = &pdev->dev;
if (register_framebuffer(&all->info) < 0) {
printk(KERN_ERR "tgafb: Could not register framebuffer\n");
ret = -EINVAL;
goto err1;
}
printk(KERN_INFO "tgafb: DC21030 [TGA] detected, rev=0x%02x\n",
all->par.tga_chip_rev);
printk(KERN_INFO "tgafb: at PCI bus %d, device %d, function %d\n",
pdev->bus->number, PCI_SLOT(pdev->devfn),
PCI_FUNC(pdev->devfn));
printk(KERN_INFO "fb%d: %s frame buffer device at 0x%lx\n",
all->info.node, all->info.fix.id, bar0_start);
return 0;
err1:
release_mem_region(bar0_start, bar0_len);
err0:
kfree(all);
return ret;
}
static void __exit
tgafb_pci_unregister(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct tga_par *par = info->par;
if (!info)
return;
unregister_framebuffer(info);
iounmap(par->tga_mem_base);
release_mem_region(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
kfree(info);
}
#ifdef MODULE
static void __exit
tgafb_exit(void)
{
pci_unregister_driver(&tgafb_driver);
}
#endif /* MODULE */
#ifndef MODULE
int __init
tgafb_setup(char *arg)
{
char *this_opt;
if (arg && *arg) {
while ((this_opt = strsep(&arg, ","))) {
if (!*this_opt)
continue;
if (!strncmp(this_opt, "mode:", 5))
mode_option = this_opt+5;
else
printk(KERN_ERR
"tgafb: unknown parameter %s\n",
this_opt);
}
}
return 0;
}
#endif /* !MODULE */
int __init
tgafb_init(void)
{
#ifndef MODULE
char *option = NULL;
if (fb_get_options("tgafb", &option))
return -ENODEV;
tgafb_setup(option);
#endif
return pci_register_driver(&tgafb_driver);
}
/*
* Modularisation
*/
module_init(tgafb_init);
#ifdef MODULE
module_exit(tgafb_exit);
#endif
MODULE_DESCRIPTION("framebuffer driver for TGA chipset");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink