kernel_optimize_test/Documentation/networking/i40evf.txt
Jesse Brandeburg 85cfa71764 i40evf: update i40evf.txt with new content
The addition of the AVF and virtchnl code to the i40evf driver
means we should update the i40evf.txt file with the most up to date
information.

It seems this file hasn't been updated in a while, so the
changes cover a little more than just AVF, but it's all only
in the i40evf.txt.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01 14:31:37 -07:00

55 lines
1.5 KiB
Plaintext

Linux* Base Driver for Intel(R) Network Connection
==================================================
Intel Ethernet Adaptive Virtual Function Linux driver.
Copyright(c) 2013-2017 Intel Corporation.
Contents
========
- Identifying Your Adapter
- Known Issues/Troubleshooting
- Support
This file describes the i40evf Linux* Base Driver.
The i40evf driver supports the below mentioned virtual function
devices and can only be activated on kernels running the i40e or
newer Physical Function (PF) driver compiled with CONFIG_PCI_IOV.
The i40evf driver requires CONFIG_PCI_MSI to be enabled.
The guest OS loading the i40evf driver must support MSI-X interrupts.
Supported Hardware
==================
Intel XL710 X710 Virtual Function
Intel Ethernet Adaptive Virtual Function
Intel X722 Virtual Function
Identifying Your Adapter
========================
For more information on how to identify your adapter, go to the
Adapter & Driver ID Guide at:
http://support.intel.com/support/go/network/adapter/idguide.htm
Known Issues/Troubleshooting
============================
Support
=======
For general information, go to the Intel support website at:
http://support.intel.com
or the Intel Wired Networking project hosted by Sourceforge at:
http://sourceforge.net/projects/e1000
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net