AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
d6e2955a6b
kernel_optimize_test/include/asm-mips/mach-au1x00/au1xxx_ide.h
Sergei Shtylyov ff6814d530 [MIPS] Alchemy common headers style cleanup 
Fix several errors and warnings given by checkpatch.pl:

- space after opening and before closing parentheses;

- opening brace following 'struct' not on the same line;

- leading spaces instead of tabs;

- use of C99 // comments;

- macros with complex values not enclosed in parentheses;

- missing space between the type and asterisk in a variable declaration;

- space between asterisk and function name;

- including <asm/io.h> instead of <linux/io.h> and <asm/irq.h> instead of
  <linux/irq.h>;

- use of '__inline__' instead of 'inline';

- space between function name and opening parenthesis;

- line over 80 characters.

In addition to these changes, also do the following:

- remove needless parentheses;

- insert spaces between operator and its operands;

- replace spaces after the macro name with tabs in the #define directives and
  after the type in the structure field declarations;

- remove excess tabs after the macro name in the #define directives and in the
  'extern' variable declarations;

- remove excess spaces between # and define for the SSI_*_MASK macros to align
  with other such macros;

- put '||' operator on the same line with its first operand;

- properly indent multi-line function prototypes;

- make the multi-line comment style consistent with the kernel style elsewhere
  by adding empty first line and/or adding space/asterisk on their left side;

- make two-line comments that only have one line of text one-line;

- convert the large multi-line comment in au1xxx_ide.h into several one-liners,
  replace spaces with tabs there;

- fix typos/errors, capitalize acronyms, etc. in the comments;

- insert missing and remove excess new lines;

- update MontaVista copyright;

- remove Pete Popov's and Steve Longerbeam's old email addresses...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-05-12 16:46:52 +01:00

195 lines
6.8 KiB
C
Raw Blame History

/*
* include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005
*
* BRIEF MODULE DESCRIPTION
* AMD Alchemy Au1xxx IDE interface routines over the Static Bus
*
* Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your option) any later
* version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
* Interface and Linux Device Driver" Application Note.
*/
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
#define DMA_WAIT_TIMEOUT 100
#define NUM_DESCRIPTORS PRD_ENTRIES
#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
#define NUM_DESCRIPTORS 2
#endif
#ifndef AU1XXX_ATA_RQSIZE
#define AU1XXX_ATA_RQSIZE 128
#endif
/* Disable Burstable-Support for DBDMA */
#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
#ifdef CONFIG_PM
/*
* This will enable the device to be powered up when write() or read()
* is called. If this is not defined, the driver will return -EBUSY.
*/
#define WAKE_ON_ACCESS 1
typedef struct {
spinlock_t lock; /* Used to block on state transitions */
au1xxx_power_dev_t *dev; /* Power Managers device structure */
unsigned stopped; /* Used to signal device is stopped */
} pm_state;
#endif
typedef struct {
u32 tx_dev_id, rx_dev_id, target_dev_id;
u32 tx_chan, rx_chan;
void *tx_desc_head, *rx_desc_head;
ide_hwif_t *hwif;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
ide_drive_t *drive;
struct dbdma_cmd *dma_table_cpu;
dma_addr_t dma_table_dma;
#endif
int irq;
u32 regbase;
#ifdef CONFIG_PM
pm_state pm;
#endif
} _auide_hwif;
/******************************************************************************/
/* PIO Mode timing calculation : */
/* */
/* Static Bus Spec ATA Spec */
/* Tcsoe = t1 */
/* Toecs = t9 */
/* Twcs = t9 */
/* Tcsh = t2i | t2 */
/* Tcsoff = t2i | t2 */
/* Twp = t2 */
/* Tcsw = t1 */
/* Tpm = 0 */
/* Ta = t1+t2 */
/******************************************************************************/
#define TCSOE_MASK (0x07 << 29)
#define TOECS_MASK (0x07 << 26)
#define TWCS_MASK (0x07 << 28)
#define TCSH_MASK (0x0F << 24)
#define TCSOFF_MASK (0x07 << 20)
#define TWP_MASK (0x3F << 14)
#define TCSW_MASK (0x0F << 10)
#define TPM_MASK (0x0F << 6)
#define TA_MASK (0x3F << 0)
#define TS_MASK (1 << 8)
/* Timing parameters PIO mode 0 */
#define SBC_IDE_PIO0_TCSOE (0x04 << 29)
#define SBC_IDE_PIO0_TOECS (0x01 << 26)
#define SBC_IDE_PIO0_TWCS (0x02 << 28)
#define SBC_IDE_PIO0_TCSH (0x08 << 24)
#define SBC_IDE_PIO0_TCSOFF (0x07 << 20)
#define SBC_IDE_PIO0_TWP (0x10 << 14)
#define SBC_IDE_PIO0_TCSW (0x04 << 10)
#define SBC_IDE_PIO0_TPM (0x00 << 6)
#define SBC_IDE_PIO0_TA (0x15 << 0)
/* Timing parameters PIO mode 1 */
#define SBC_IDE_PIO1_TCSOE (0x03 << 29)
#define SBC_IDE_PIO1_TOECS (0x01 << 26)
#define SBC_IDE_PIO1_TWCS (0x01 << 28)
#define SBC_IDE_PIO1_TCSH (0x06 << 24)
#define SBC_IDE_PIO1_TCSOFF (0x06 << 20)
#define SBC_IDE_PIO1_TWP (0x08 << 14)
#define SBC_IDE_PIO1_TCSW (0x03 << 10)
#define SBC_IDE_PIO1_TPM (0x00 << 6)
#define SBC_IDE_PIO1_TA (0x0B << 0)
/* Timing parameters PIO mode 2 */
#define SBC_IDE_PIO2_TCSOE (0x05 << 29)
#define SBC_IDE_PIO2_TOECS (0x01 << 26)
#define SBC_IDE_PIO2_TWCS (0x01 << 28)
#define SBC_IDE_PIO2_TCSH (0x07 << 24)
#define SBC_IDE_PIO2_TCSOFF (0x07 << 20)
#define SBC_IDE_PIO2_TWP (0x1F << 14)
#define SBC_IDE_PIO2_TCSW (0x05 << 10)
#define SBC_IDE_PIO2_TPM (0x00 << 6)
#define SBC_IDE_PIO2_TA (0x22 << 0)
/* Timing parameters PIO mode 3 */
#define SBC_IDE_PIO3_TCSOE (0x05 << 29)
#define SBC_IDE_PIO3_TOECS (0x01 << 26)
#define SBC_IDE_PIO3_TWCS (0x01 << 28)
#define SBC_IDE_PIO3_TCSH (0x0D << 24)
#define SBC_IDE_PIO3_TCSOFF (0x0D << 20)
#define SBC_IDE_PIO3_TWP (0x15 << 14)
#define SBC_IDE_PIO3_TCSW (0x05 << 10)
#define SBC_IDE_PIO3_TPM (0x00 << 6)
#define SBC_IDE_PIO3_TA (0x1A << 0)
/* Timing parameters PIO mode 4 */
#define SBC_IDE_PIO4_TCSOE (0x04 << 29)
#define SBC_IDE_PIO4_TOECS (0x01 << 26)
#define SBC_IDE_PIO4_TWCS (0x01 << 28)
#define SBC_IDE_PIO4_TCSH (0x04 << 24)
#define SBC_IDE_PIO4_TCSOFF (0x04 << 20)
#define SBC_IDE_PIO4_TWP (0x0D << 14)
#define SBC_IDE_PIO4_TCSW (0x03 << 10)
#define SBC_IDE_PIO4_TPM (0x00 << 6)
#define SBC_IDE_PIO4_TA (0x12 << 0)
/* Timing parameters MDMA mode 0 */
#define SBC_IDE_MDMA0_TCSOE (0x03 << 29)
#define SBC_IDE_MDMA0_TOECS (0x01 << 26)
#define SBC_IDE_MDMA0_TWCS (0x01 << 28)
#define SBC_IDE_MDMA0_TCSH (0x07 << 24)
#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20)
#define SBC_IDE_MDMA0_TWP (0x0C << 14)
#define SBC_IDE_MDMA0_TCSW (0x03 << 10)
#define SBC_IDE_MDMA0_TPM (0x00 << 6)
#define SBC_IDE_MDMA0_TA (0x0F << 0)
/* Timing parameters MDMA mode 1 */
#define SBC_IDE_MDMA1_TCSOE (0x05 << 29)
#define SBC_IDE_MDMA1_TOECS (0x01 << 26)
#define SBC_IDE_MDMA1_TWCS (0x01 << 28)
#define SBC_IDE_MDMA1_TCSH (0x05 << 24)
#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20)
#define SBC_IDE_MDMA1_TWP (0x0F << 14)
#define SBC_IDE_MDMA1_TCSW (0x05 << 10)
#define SBC_IDE_MDMA1_TPM (0x00 << 6)
#define SBC_IDE_MDMA1_TA (0x15 << 0)
/* Timing parameters MDMA mode 2 */
#define SBC_IDE_MDMA2_TCSOE (0x04 << 29)
#define SBC_IDE_MDMA2_TOECS (0x01 << 26)
#define SBC_IDE_MDMA2_TWCS (0x01 << 28)
#define SBC_IDE_MDMA2_TCSH (0x04 << 24)
#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20)
#define SBC_IDE_MDMA2_TWP (0x0D << 14)
#define SBC_IDE_MDMA2_TCSW (0x04 << 10)
#define SBC_IDE_MDMA2_TPM (0x00 << 6)
#define SBC_IDE_MDMA2_TA (0x12 << 0)
#define SBC_IDE_TIMING(mode) \
(SBC_IDE_##mode##_TWCS | \
SBC_IDE_##mode##_TCSH | \
SBC_IDE_##mode##_TCSOFF | \
SBC_IDE_##mode##_TWP | \
SBC_IDE_##mode##_TCSW | \
SBC_IDE_##mode##_TPM | \
SBC_IDE_##mode##_TA)
View Git Blame Copy Permalink