forked from luck/tmp_suning_uos_patched
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
196 lines
7.8 KiB
Plaintext
196 lines
7.8 KiB
Plaintext
$Id: README.hysdn,v 1.3.6.1 2001/02/10 14:41:19 kai Exp $
|
|
The hysdn driver has been written by
|
|
by Werner Cornelius (werner@isdn4linux.de or werner@titro.de)
|
|
for Hypercope GmbH Aachen Germany. Hypercope agreed to publish this driver
|
|
under the GNU General Public License.
|
|
|
|
The CAPI 2.0-support was added by Ulrich Albrecht (ualbrecht@hypercope.de)
|
|
for Hypercope GmbH Aachen, Germany.
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
Table of contents
|
|
=================
|
|
|
|
1. About the driver
|
|
|
|
2. Loading/Unloading the driver
|
|
|
|
3. Entries in the /proc filesystem
|
|
|
|
4. The /proc/net/hysdn/cardconfX file
|
|
|
|
5. The /proc/net/hysdn/cardlogX file
|
|
|
|
6. Where to get additional info and help
|
|
|
|
|
|
1. About the driver
|
|
|
|
The drivers/isdn/hysdn subdir contains a driver for HYPERCOPEs active
|
|
PCI isdn cards Champ, Ergo and Metro. To enable support for this cards
|
|
enable ISDN support in the kernel config and support for HYSDN cards in
|
|
the active cards submenu. The driver may only be compiled and used if
|
|
support for loadable modules and the process filesystem have been enabled.
|
|
|
|
These cards provide two different interfaces to the kernel. Without the
|
|
optional CAPI 2.0 support, they register as ethernet card. IP-routing
|
|
to a ISDN-destination is performed on the card itself. All necessary
|
|
handlers for various protocols like ppp and others as well as config info
|
|
and firmware may be fetched from Hypercopes WWW-Site www.hypercope.de.
|
|
|
|
With CAPI 2.0 support enabled, the card can also be used as a CAPI 2.0
|
|
compliant devices with either CAPI 2.0 applications
|
|
(check isdn4k-utils) or -using the capidrv module- as a regular
|
|
isdn4linux device. This is done via the same mechanism as with the
|
|
active AVM cards and in fact uses the same module.
|
|
|
|
|
|
2. Loading/Unloading the driver
|
|
|
|
The module has no command line parameters and auto detects up to 10 cards
|
|
in the id-range 0-9.
|
|
If a loaded driver shall be unloaded all open files in the /proc/net/hysdn
|
|
subdir need to be closed and all ethernet interfaces allocated by this
|
|
driver must be shut down. Otherwise the module counter will avoid a module
|
|
unload.
|
|
|
|
If you are using the CAPI 2.0-interface, make sure to load/modprobe the
|
|
kernelcapi-module first.
|
|
|
|
If you plan to use the capidrv-link to isdn4linux, make sure to load
|
|
capidrv.o after all modules using this driver (i.e. after hysdn and
|
|
any avm-specific modules).
|
|
|
|
3. Entries in the /proc filesystem
|
|
|
|
When the module has been loaded it adds the directory hysdn in the
|
|
/proc/net tree. This directory contains exactly 2 file entries for each
|
|
card. One is called cardconfX and the other cardlogX, where X is the
|
|
card id number from 0 to 9.
|
|
The cards are numbered in the order found in the PCI config data.
|
|
|
|
4. The /proc/net/hysdn/cardconfX file
|
|
|
|
This file may be read to get by everyone to get info about the cards type,
|
|
actual state, available features and used resources.
|
|
The first 3 entries (id, bus and slot) are PCI info fields, the following
|
|
type field gives the information about the cards type:
|
|
|
|
4 -> Ergo card (server card with 2 b-chans)
|
|
5 -> Metro card (server card with 4 or 8 b-chans)
|
|
6 -> Champ card (client card with 2 b-chans)
|
|
|
|
The following 3 fields show the hardware assignments for irq, iobase and the
|
|
dual ported memory (dp-mem).
|
|
The fields b-chans and fax-chans announce the available card resources of
|
|
this types for the user.
|
|
The state variable indicates the actual drivers state for this card with the
|
|
following assignments.
|
|
|
|
0 -> card has not been booted since driver load
|
|
1 -> card booting is actually in progess
|
|
2 -> card is in an error state due to a previous boot failure
|
|
3 -> card is booted and active
|
|
|
|
And the last field (device) shows the name of the ethernet device assigned
|
|
to this card. Up to the first successful boot this field only shows a -
|
|
to tell that no net device has been allocated up to now. Once a net device
|
|
has been allocated it remains assigned to this card, even if a card is
|
|
rebooted and an boot error occurs.
|
|
|
|
Writing to the cardconfX file boots the card or transfers config lines to
|
|
the cards firmware. The type of data is automatically detected when the
|
|
first data is written. Only root has write access to this file.
|
|
The firmware boot files are normally called hyclient.pof for client cards
|
|
and hyserver.pof for server cards.
|
|
After successfully writing the boot file, complete config files or single
|
|
config lines may be copied to this file.
|
|
If an error occurs the return value given to the writing process has the
|
|
following additional codes (decimal):
|
|
|
|
1000 Another process is currently bootng the card
|
|
1001 Invalid firmware header
|
|
1002 Boards dual-port RAM test failed
|
|
1003 Internal firmware handler error
|
|
1004 Boot image size invalid
|
|
1005 First boot stage (bootstrap loader) failed
|
|
1006 Second boot stage failure
|
|
1007 Timeout waiting for card ready during boot
|
|
1008 Operation only allowed in booted state
|
|
1009 Config line too long
|
|
1010 Invalid channel number
|
|
1011 Timeout sending config data
|
|
|
|
Additional info about error reasons may be fetched from the log output.
|
|
|
|
5. The /proc/net/hysdn/cardlogX file
|
|
|
|
The cardlogX file entry may be opened multiple for reading by everyone to
|
|
get the cards and drivers log data. Card messages always start with the
|
|
keyword LOG. All other lines are output from the driver.
|
|
The driver log data may be redirected to the syslog by selecting the
|
|
appropriate bitmask. The cards log messages will always be send to this
|
|
interface but never to the syslog.
|
|
|
|
A root user may write a decimal or hex (with 0x) value t this file to select
|
|
desired output options. As mentioned above the cards log dat is always
|
|
written to the cardlog file independent of the following options only used
|
|
to check and debug the driver itself:
|
|
|
|
For example:
|
|
echo "0x34560078" > /proc/net/hysdn/cardlog0
|
|
to output the hex log mask 34560078 for card 0.
|
|
|
|
The written value is regarded as an unsigned 32-Bit value, bit ored for
|
|
desired output. The following bits are already assigned:
|
|
|
|
0x80000000 All driver log data is alternatively via syslog
|
|
0x00000001 Log memory allocation errors
|
|
0x00000010 Firmware load start and close are logged
|
|
0x00000020 Log firmware record parser
|
|
0x00000040 Log every firmware write actions
|
|
0x00000080 Log all card related boot messages
|
|
0x00000100 Output all config data sent for debugging purposes
|
|
0x00000200 Only non comment config lines are shown wth channel
|
|
0x00000400 Additional conf log output
|
|
0x00001000 Log the asynchronous scheduler actions (config and log)
|
|
0x00100000 Log all open and close actions to /proc/net/hysdn/card files
|
|
0x00200000 Log all actions from /proc file entries
|
|
0x00010000 Log network interface init and deinit
|
|
|
|
6. Where to get additional info and help
|
|
|
|
If you have any problems concerning the driver or configuration contact
|
|
the Hypercope support team (support@hypercope.de) and or the authors
|
|
Werner Cornelius (werner@isdn4linux or cornelius@titro.de) or
|
|
Ulrich Albrecht (ualbrecht@hypercope.de).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|