kernel_optimize_test/arch/powerpc/sysdev
Jean Delvare 2f0a8df40f [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries
I2C adapter drivers are supposed to handle retries on nack by themselves
if they do, so there's no point in setting .retries if they don't.

As this retry mechanism is going away (at least in its current form),
clean this up now so that we don't get build failures later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
2008-01-26 15:04:01 +00:00
..
bestcomm [POWERPC] bestcomm: Restrict bus prefetch bugfix to original mpc5200 silicon. 2007-10-21 10:52:02 -06:00
qe_lib Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
axonram.c missed bio_endio() in axonram 2007-10-11 23:04:25 -07:00
commproc.c [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
commproc.h [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
cpm2_common.c [POWRPC] CPM2: Eliminate section mismatch warning in cpm2_reset(). 2007-12-13 22:44:38 -06:00
cpm2_pic.c [POWERPC] cpm2: Infrastructure code cleanup. 2007-10-04 11:02:04 -05:00
cpm2_pic.h [POWERPC] cpm2: CPM2 interrupt controller fix 2007-02-07 14:03:20 +11:00
cpm_common.c [POWERPC] cpm: Fix a couple minor issues in cpm_common.c. 2007-11-09 03:47:44 -06:00
dart_iommu.c [POWERPC] Fix section mismatch in dart_iommu.c 2007-08-17 11:02:06 +10:00
dart.h [POWERPC] Use 4kB iommu pages even on 64kB-page systems 2006-11-01 14:52:48 +11:00
dcr-low.S [POWERPC] Generic DCR infrastructure 2006-12-04 16:08:25 +11:00
dcr.c Use dcr_host_t.base in dcr_unmap() 2007-10-15 14:29:49 -04:00
fsl_pci.c [POWERPC] Add missing semicolon for fsl_pci.c 2007-10-16 09:06:43 -05:00
fsl_pci.h [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected 2007-07-23 10:27:08 -05:00
fsl_soc.c [POWERPC] spi: Support non-QE processors 2007-10-08 09:05:30 -05:00
fsl_soc.h [POWERPC] 85xx/86xx: refactor RSTCR reset code 2007-10-08 08:38:47 -05:00
grackle.c [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime 2007-07-23 22:29:09 -05:00
i8259.c [POWERPC] i8259: Add disable method 2007-11-08 14:15:29 +11:00
indirect_pci.c [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci 2007-10-12 14:05:17 +10:00
ipic.c Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
ipic.h [POWERPC] Add an optional device_node pointer to the irq_host 2007-09-14 01:33:20 +10:00
Makefile [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200 2007-10-16 17:09:34 -06:00
micropatch.c [POWERPC] 8xx: powerpc port of core CPM PIC 2007-02-07 14:03:17 +11:00
mmio_nvram.c [POWERPC] Fix cell's mmio nvram to properly parse device tree 2007-01-22 21:27:35 +11:00
mpc8xx_pic.c [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
mpc8xx_pic.h [POWERPC] 8xx: mpc885ads pcmcia support 2007-07-10 00:33:51 -05:00
mpic_msi.c [POWERPC] Fix section mismatch in PCI code 2007-09-19 15:25:34 +10:00
mpic_u3msi.c [POWERPC] Inline u3msi_compose_msi_msg() 2007-10-03 09:11:42 +10:00
mpic.c Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
mpic.h [POWERPC] Support setting affinity for U3/U4 MSI sources 2007-09-22 14:49:22 +10:00
mv64x60_dev.c [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries 2008-01-26 15:04:01 +00:00
mv64x60_pci.c [POWERPC] Fix mv643xx_pci sysfs .read and .write functions 2007-11-08 14:15:29 +11:00
mv64x60_pic.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
mv64x60_udbg.c [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
mv64x60.h [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
pmi.c [POWERPC] Move of_platform_driver initialisations: arch/powerpc 2007-10-11 20:40:49 +10:00
rtc_cmos_setup.c [POWERPC] Add interrupt resource for RTC CMOS driver 2007-08-17 13:18:58 -05:00
tsi108_dev.c [POWERPC] Fix problems with device tree representation of TSI-1xx bridges 2007-06-14 22:30:17 +10:00
tsi108_pci.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
uic.c [POWERPC] 4xx: UIC add mask_ack callback 2007-11-19 08:22:03 -06:00
xilinx_intc.c [POWERPC] Virtex: add xilinx interrupt controller driver 2007-10-03 07:23:14 -05:00