kernel_optimize_test/arch/ia64/kernel/irq_ia64.c
Thomas Gleixner 38515e908b [PATCH] Scheduled removal of SA_xxx interrupt flags fixups
The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

335 lines
7.6 KiB
C

/*
* linux/arch/ia64/kernel/irq_ia64.c
*
* Copyright (C) 1998-2001 Hewlett-Packard Co
* Stephane Eranian <eranian@hpl.hp.com>
* David Mosberger-Tang <davidm@hpl.hp.com>
*
* 6/10/99: Updated to bring in sync with x86 version to facilitate
* support for SMP and different interrupt controllers.
*
* 09/15/00 Goutham Rao <goutham.rao@intel.com> Implemented pci_irq_to_vector
* PCI to vector allocation routine.
* 04/14/2004 Ashok Raj <ashok.raj@intel.com>
* Added CPU Hotplug handling for IPF.
*/
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel_stat.h>
#include <linux/slab.h>
#include <linux/ptrace.h>
#include <linux/random.h> /* for rand_initialize_irq() */
#include <linux/signal.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/threads.h>
#include <linux/bitops.h>
#include <linux/irq.h>
#include <asm/delay.h>
#include <asm/intrinsics.h>
#include <asm/io.h>
#include <asm/hw_irq.h>
#include <asm/machvec.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#ifdef CONFIG_PERFMON
# include <asm/perfmon.h>
#endif
#define IRQ_DEBUG 0
/* These can be overridden in platform_irq_init */
int ia64_first_device_vector = IA64_DEF_FIRST_DEVICE_VECTOR;
int ia64_last_device_vector = IA64_DEF_LAST_DEVICE_VECTOR;
/* default base addr of IPI table */
void __iomem *ipi_base_addr = ((void __iomem *)
(__IA64_UNCACHED_OFFSET | IA64_IPI_DEFAULT_BASE_ADDR));
/*
* Legacy IRQ to IA-64 vector translation table.
*/
__u8 isa_irq_to_vector_map[16] = {
/* 8259 IRQ translation, first 16 entries */
0x2f, 0x20, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29,
0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21
};
EXPORT_SYMBOL(isa_irq_to_vector_map);
static unsigned long ia64_vector_mask[BITS_TO_LONGS(IA64_MAX_DEVICE_VECTORS)];
int
assign_irq_vector (int irq)
{
int pos, vector;
again:
pos = find_first_zero_bit(ia64_vector_mask, IA64_NUM_DEVICE_VECTORS);
vector = IA64_FIRST_DEVICE_VECTOR + pos;
if (vector > IA64_LAST_DEVICE_VECTOR)
return -ENOSPC;
if (test_and_set_bit(pos, ia64_vector_mask))
goto again;
return vector;
}
void
free_irq_vector (int vector)
{
int pos;
if (vector < IA64_FIRST_DEVICE_VECTOR || vector > IA64_LAST_DEVICE_VECTOR)
return;
pos = vector - IA64_FIRST_DEVICE_VECTOR;
if (!test_and_clear_bit(pos, ia64_vector_mask))
printk(KERN_WARNING "%s: double free!\n", __FUNCTION__);
}
int
reserve_irq_vector (int vector)
{
int pos;
if (vector < IA64_FIRST_DEVICE_VECTOR ||
vector > IA64_LAST_DEVICE_VECTOR)
return -EINVAL;
pos = vector - IA64_FIRST_DEVICE_VECTOR;
return test_and_set_bit(pos, ia64_vector_mask);
}
/*
* Dynamic irq allocate and deallocation for MSI
*/
int create_irq(void)
{
int vector = assign_irq_vector(AUTO_ASSIGN);
if (vector >= 0)
dynamic_irq_init(vector);
return vector;
}
void destroy_irq(unsigned int irq)
{
dynamic_irq_cleanup(irq);
free_irq_vector(irq);
}
#ifdef CONFIG_SMP
# define IS_RESCHEDULE(vec) (vec == IA64_IPI_RESCHEDULE)
#else
# define IS_RESCHEDULE(vec) (0)
#endif
/*
* That's where the IVT branches when we get an external
* interrupt. This branches to the correct hardware IRQ handler via
* function ptr.
*/
void
ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
unsigned long saved_tpr;
#if IRQ_DEBUG
{
unsigned long bsp, sp;
/*
* Note: if the interrupt happened while executing in
* the context switch routine (ia64_switch_to), we may
* get a spurious stack overflow here. This is
* because the register and the memory stack are not
* switched atomically.
*/
bsp = ia64_getreg(_IA64_REG_AR_BSP);
sp = ia64_getreg(_IA64_REG_SP);
if ((sp - bsp) < 1024) {
static unsigned char count;
static long last_time;
if (jiffies - last_time > 5*HZ)
count = 0;
if (++count < 5) {
last_time = jiffies;
printk("ia64_handle_irq: DANGER: less than "
"1KB of free stack space!!\n"
"(bsp=0x%lx, sp=%lx)\n", bsp, sp);
}
}
}
#endif /* IRQ_DEBUG */
/*
* Always set TPR to limit maximum interrupt nesting depth to
* 16 (without this, it would be ~240, which could easily lead
* to kernel stack overflows).
*/
irq_enter();
saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
ia64_srlz_d();
while (vector != IA64_SPURIOUS_INT_VECTOR) {
if (unlikely(IS_RESCHEDULE(vector)))
kstat_this_cpu.irqs[vector]++;
else {
ia64_setreg(_IA64_REG_CR_TPR, vector);
ia64_srlz_d();
generic_handle_irq(local_vector_to_irq(vector));
/*
* Disable interrupts and send EOI:
*/
local_irq_disable();
ia64_setreg(_IA64_REG_CR_TPR, saved_tpr);
}
ia64_eoi();
vector = ia64_get_ivr();
}
/*
* This must be done *after* the ia64_eoi(). For example, the keyboard softirq
* handler needs to be able to wait for further keyboard interrupts, which can't
* come through until ia64_eoi() has been done.
*/
irq_exit();
set_irq_regs(old_regs);
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* This function emulates a interrupt processing when a cpu is about to be
* brought down.
*/
void ia64_process_pending_intr(void)
{
ia64_vector vector;
unsigned long saved_tpr;
extern unsigned int vectors_in_migration[NR_IRQS];
vector = ia64_get_ivr();
irq_enter();
saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
ia64_srlz_d();
/*
* Perform normal interrupt style processing
*/
while (vector != IA64_SPURIOUS_INT_VECTOR) {
if (unlikely(IS_RESCHEDULE(vector)))
kstat_this_cpu.irqs[vector]++;
else {
struct pt_regs *old_regs = set_irq_regs(NULL);
ia64_setreg(_IA64_REG_CR_TPR, vector);
ia64_srlz_d();
/*
* Now try calling normal ia64_handle_irq as it would have got called
* from a real intr handler. Try passing null for pt_regs, hopefully
* it will work. I hope it works!.
* Probably could shared code.
*/
vectors_in_migration[local_vector_to_irq(vector)]=0;
generic_handle_irq(local_vector_to_irq(vector));
set_irq_regs(old_regs);
/*
* Disable interrupts and send EOI
*/
local_irq_disable();
ia64_setreg(_IA64_REG_CR_TPR, saved_tpr);
}
ia64_eoi();
vector = ia64_get_ivr();
}
irq_exit();
}
#endif
#ifdef CONFIG_SMP
extern irqreturn_t handle_IPI (int irq, void *dev_id);
static irqreturn_t dummy_handler (int irq, void *dev_id)
{
BUG();
}
static struct irqaction ipi_irqaction = {
.handler = handle_IPI,
.flags = IRQF_DISABLED,
.name = "IPI"
};
static struct irqaction resched_irqaction = {
.handler = dummy_handler,
.flags = IRQF_DISABLED,
.name = "resched"
};
#endif
void
register_percpu_irq (ia64_vector vec, struct irqaction *action)
{
irq_desc_t *desc;
unsigned int irq;
for (irq = 0; irq < NR_IRQS; ++irq)
if (irq_to_vector(irq) == vec) {
desc = irq_desc + irq;
desc->status |= IRQ_PER_CPU;
desc->chip = &irq_type_ia64_lsapic;
if (action)
setup_irq(irq, action);
}
}
void __init
init_IRQ (void)
{
register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
#ifdef CONFIG_SMP
register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction);
#endif
#ifdef CONFIG_PERFMON
pfm_init_percpu();
#endif
platform_irq_init();
}
void
ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect)
{
void __iomem *ipi_addr;
unsigned long ipi_data;
unsigned long phys_cpu_id;
#ifdef CONFIG_SMP
phys_cpu_id = cpu_physical_id(cpu);
#else
phys_cpu_id = (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff;
#endif
/*
* cpu number is in 8bit ID and 8bit EID
*/
ipi_data = (delivery_mode << 8) | (vector & 0xff);
ipi_addr = ipi_base_addr + ((phys_cpu_id << 4) | ((redirect & 1) << 3));
writeq(ipi_data, ipi_addr);
}