forked from luck/tmp_suning_uos_patched
76fdb3a9e1
Fireface 400 is a second model of RME Fireface series, released in 2006.
This commit adds support for this model.
This model supports 8 analog channels, 2 S/PDIF channels and 8 ADAT
channels in both of tx/rx packet. The number of ADAT channels differs
depending on each mode of sampling transmission frequency.
$ python2 linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04107768 bus_info_length 4, crc_length 16, crc 30568 (should be 61311)
404 31333934 bus_name "1394"
408 20009002 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 9 (1024)
40c 000a3501 company_id 000a35 |
410 1bd0862a device_id 011bd0862a | EUI-64 000a35011bd0862a
root directory
-----------------------------------------------------------------
414 000485ec directory_length 4, crc 34284
418 03000a35 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 000314c4 directory_length 3, crc 5316
42c 12000a35 specifier id
430 13000002 version
434 17101800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 000261a8 leaf_length 2, crc 25000
43c 000a3501 company_id 000a35 |
440 1bd0862a device_id 011bd0862a | EUI-64 000a35011bd0862a
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
164 lines
4.7 KiB
Plaintext
164 lines
4.7 KiB
Plaintext
menuconfig SND_FIREWIRE
|
|
bool "FireWire sound devices"
|
|
depends on FIREWIRE
|
|
default y
|
|
help
|
|
Support for IEEE-1394/FireWire/iLink sound devices.
|
|
|
|
if SND_FIREWIRE && FIREWIRE
|
|
|
|
config SND_FIREWIRE_LIB
|
|
tristate
|
|
select SND_PCM
|
|
select SND_RAWMIDI
|
|
|
|
config SND_DICE
|
|
tristate "DICE-based DACs support"
|
|
select SND_HWDEP
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for many DACs based on the DICE
|
|
chip family (DICE-II/Jr/Mini) which TC Applied Technologies produces.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-dice.
|
|
|
|
config SND_OXFW
|
|
tristate "Oxford Semiconductor FW970/971 chipset support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based on
|
|
Oxford Semiconductor FW970/971 chipset.
|
|
* Griffin Firewave
|
|
* LaCie Firewire Speakers
|
|
* Behringer F-Control Audio 202
|
|
* Mackie(Loud) Onyx-i series (former models)
|
|
* Mackie(Loud) Onyx 1640i (former model)
|
|
* Mackie(Loud) Onyx Satellite
|
|
* Mackie(Loud) Tapco Link.Firewire
|
|
* Mackie(Loud) d.2 pro/d.4 pro
|
|
* Mackie(Loud) U.420/U.420d
|
|
* TASCAM FireOne
|
|
* Stanton Controllers & Systems 1 Deck/Mixer
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-oxfw.
|
|
|
|
config SND_ISIGHT
|
|
tristate "Apple iSight microphone"
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the front and rear microphones
|
|
of the Apple iSight web camera.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-isight.
|
|
|
|
config SND_FIREWORKS
|
|
tristate "Echo Fireworks board module support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on Echo Digital Audio Fireworks board:
|
|
* Mackie Onyx 400F/1200F
|
|
* Echo AudioFire12/8(until 2009 July)
|
|
* Echo AudioFire2/4/Pre8/8(since 2009 July)
|
|
* Echo Fireworks 8/HDMI
|
|
* Gibson Robot Interface Pack/GoldTop
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fireworks.
|
|
|
|
config SND_BEBOB
|
|
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
|
|
* Edirol FA-66/FA-101
|
|
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
|
|
* BridgeCo RDAudio1/Audio5
|
|
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
|
|
* Mackie d.2 (FireWire Option)
|
|
* Stanton FinalScratch 2 (ScratchAmp)
|
|
* Tascam IF-FW/DM
|
|
* Behringer XENIX UFX 1204/1604
|
|
* Behringer Digital Mixer X32 series (X-UF Card)
|
|
* Behringer FCA610/1616
|
|
* Apogee Rosetta 200/400 (X-FireWire card)
|
|
* Apogee DA/AD/DD-16X (X-FireWire card)
|
|
* Apogee Ensemble
|
|
* ESI QuataFire 610
|
|
* AcousticReality eARMasterOne
|
|
* CME MatrixKFW
|
|
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
|
|
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
|
|
* Lynx Aurora 8/16 (LT-FW)
|
|
* ICON FireXon
|
|
* PrismSound Orpheus/ADA-8XR
|
|
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
|
|
* TerraTec EWS MIC2/EWS MIC8
|
|
* TerraTec Aureon 7.1 FireWire
|
|
* Yamaha GO44/GO46
|
|
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
|
|
* M-Audio FireWire410/AudioPhile/Solo
|
|
* M-Audio Ozonic/NRV10/ProfireLightBridge
|
|
* M-Audio FireWire 1814/ProjectMix IO
|
|
* Digidesign Mbox 2 Pro
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-bebob.
|
|
|
|
config SND_FIREWIRE_DIGI00X
|
|
tristate "Digidesign Digi 002/003 family support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for Digidesign Digi 002/003 family.
|
|
* Digi 002 Console
|
|
* Digi 002 Rack
|
|
* Digi 003 Console
|
|
* Digi 003 Rack
|
|
* Digi 003 Rack+
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-digi00x.
|
|
|
|
config SND_FIREWIRE_TASCAM
|
|
tristate "TASCAM FireWire series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for TASCAM.
|
|
* FW-1884
|
|
* FW-1082
|
|
* FW-1804
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-tascam.
|
|
|
|
config SND_FIREWIRE_MOTU
|
|
tristate "Mark of the unicorn FireWire series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to enable support for FireWire devices which MOTU produced:
|
|
* 828mk2
|
|
* 828mk3
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-motu.
|
|
|
|
config SND_FIREFACE
|
|
tristate "RME Fireface series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for RME fireface series.
|
|
* Fireface 400
|
|
|
|
endif # SND_FIREWIRE
|