forked from luck/tmp_suning_uos_patched
e10f8c667b
The FC-BB-6 committee is proposing a new FIP usage model called VN_port to VN_port mode. It allows VN_ports to discover each other over a loss-free L2 Ethernet without any FCF or Fibre-channel fabric services. This is point-to-multipoint. There is also a variant of this called point-to-point which provides for making sure there is just one pair of ports operating over the Ethernet fabric. We add these new states: VNMP_START, _PROBE1, _PROBE2, _CLAIM, and _UP. These usually go quickly in that sequence. After waiting a random amount of time up to 100 ms in START, we select a pseudo-random proposed locally-unique port ID and send out probes in states PROBE1 and PROBE2, 100 ms apart. If no probe responses are heard, we proceed to CLAIM state 400 ms later and send a claim notification. We wait another 400 ms to receive claim responses, which give us a list of the other nodes on the network, including their FC-4 capabilities. After another 400 ms we go to VNMP_UP state and should start interoperating with any of the nodes for whic we receivec claim responses. More details are in the spec.j Add the new mode as FIP_MODE_VN2VN. The driver must specify explicitly that it wants to operate in this mode. There is no automatic detection between point-to-multipoint and fabric mode, and the local port initialization is affected, so it isn't anticipated that there will ever be any such automatic switchover. It may eventually be possible to have both fabric and VN2VN modes on the same L2 network, which may be done by two separate local VN_ports (lports). When in VN2VN mode, FIP replaces libfc's fabric-oriented discovery module with its own simple code that adds remote ports as they are discovered from incoming claim notifications and responses. These hooks are placed by fcoe_disc_init(). A linear list of discovered vn_ports is maintained under the fcoe_ctlr struct. It is expected to be short for now, and accessed infrequently. It is kept under RCU for lock-ordering reasons. The lport and/or rport mutexes may be held when we need to lookup a fcoe_vnport during an ELS send. Change fcoe_ctlr_encaps() to lookup the destination vn_port in the list of peers for the destination MAC address of the FIP-encapsulated frame. Add a new function fcoe_disc_init() to initialize just the discovery portion of libfcoe for VN2VN mode. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
954 lines
26 KiB
C
954 lines
26 KiB
C
/*
|
|
* Copyright 2008 Cisco Systems, Inc. All rights reserved.
|
|
* Copyright 2007 Nuova Systems, Inc. All rights reserved.
|
|
*
|
|
* This program is free software; you may redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/mempool.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/if_ether.h>
|
|
#include <scsi/fc/fc_fip.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_transport.h>
|
|
#include <scsi/scsi_transport_fc.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include <scsi/libfc.h>
|
|
#include <scsi/fc_frame.h>
|
|
|
|
#include "vnic_dev.h"
|
|
#include "vnic_intr.h"
|
|
#include "vnic_stats.h"
|
|
#include "fnic_io.h"
|
|
#include "fnic.h"
|
|
|
|
#define PCI_DEVICE_ID_CISCO_FNIC 0x0045
|
|
|
|
/* Timer to poll notification area for events. Used for MSI interrupts */
|
|
#define FNIC_NOTIFY_TIMER_PERIOD (2 * HZ)
|
|
|
|
static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES];
|
|
static struct kmem_cache *fnic_io_req_cache;
|
|
LIST_HEAD(fnic_list);
|
|
DEFINE_SPINLOCK(fnic_list_lock);
|
|
|
|
/* Supported devices by fnic module */
|
|
static struct pci_device_id fnic_id_table[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_FNIC) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DESCRIPTION(DRV_DESCRIPTION);
|
|
MODULE_AUTHOR("Abhijeet Joglekar <abjoglek@cisco.com>, "
|
|
"Joseph R. Eykholt <jeykholt@cisco.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DEVICE_TABLE(pci, fnic_id_table);
|
|
|
|
unsigned int fnic_log_level;
|
|
module_param(fnic_log_level, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels");
|
|
|
|
|
|
static struct libfc_function_template fnic_transport_template = {
|
|
.frame_send = fnic_send,
|
|
.lport_set_port_id = fnic_set_port_id,
|
|
.fcp_abort_io = fnic_empty_scsi_cleanup,
|
|
.fcp_cleanup = fnic_empty_scsi_cleanup,
|
|
.exch_mgr_reset = fnic_exch_mgr_reset
|
|
};
|
|
|
|
static int fnic_slave_alloc(struct scsi_device *sdev)
|
|
{
|
|
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
|
|
struct fc_lport *lp = shost_priv(sdev->host);
|
|
struct fnic *fnic = lport_priv(lp);
|
|
|
|
sdev->tagged_supported = 1;
|
|
|
|
if (!rport || fc_remote_port_chkready(rport))
|
|
return -ENXIO;
|
|
|
|
scsi_activate_tcq(sdev, FNIC_DFLT_QUEUE_DEPTH);
|
|
rport->dev_loss_tmo = fnic->config.port_down_timeout / 1000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct scsi_host_template fnic_host_template = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.queuecommand = fnic_queuecommand,
|
|
.eh_abort_handler = fnic_abort_cmd,
|
|
.eh_device_reset_handler = fnic_device_reset,
|
|
.eh_host_reset_handler = fnic_host_reset,
|
|
.slave_alloc = fnic_slave_alloc,
|
|
.change_queue_depth = fc_change_queue_depth,
|
|
.change_queue_type = fc_change_queue_type,
|
|
.this_id = -1,
|
|
.cmd_per_lun = 3,
|
|
.can_queue = FNIC_MAX_IO_REQ,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.sg_tablesize = FNIC_MAX_SG_DESC_CNT,
|
|
.max_sectors = 0xffff,
|
|
.shost_attrs = fnic_attrs,
|
|
};
|
|
|
|
static void fnic_get_host_speed(struct Scsi_Host *shost);
|
|
static struct scsi_transport_template *fnic_fc_transport;
|
|
static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *);
|
|
|
|
static struct fc_function_template fnic_fc_functions = {
|
|
|
|
.show_host_node_name = 1,
|
|
.show_host_port_name = 1,
|
|
.show_host_supported_classes = 1,
|
|
.show_host_supported_fc4s = 1,
|
|
.show_host_active_fc4s = 1,
|
|
.show_host_maxframe_size = 1,
|
|
.show_host_port_id = 1,
|
|
.show_host_supported_speeds = 1,
|
|
.get_host_speed = fnic_get_host_speed,
|
|
.show_host_speed = 1,
|
|
.show_host_port_type = 1,
|
|
.get_host_port_state = fc_get_host_port_state,
|
|
.show_host_port_state = 1,
|
|
.show_host_symbolic_name = 1,
|
|
.show_rport_maxframe_size = 1,
|
|
.show_rport_supported_classes = 1,
|
|
.show_host_fabric_name = 1,
|
|
.show_starget_node_name = 1,
|
|
.show_starget_port_name = 1,
|
|
.show_starget_port_id = 1,
|
|
.show_rport_dev_loss_tmo = 1,
|
|
.issue_fc_host_lip = fnic_reset,
|
|
.get_fc_host_stats = fnic_get_stats,
|
|
.dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
|
|
.terminate_rport_io = fnic_terminate_rport_io,
|
|
.bsg_request = fc_lport_bsg_request,
|
|
};
|
|
|
|
static void fnic_get_host_speed(struct Scsi_Host *shost)
|
|
{
|
|
struct fc_lport *lp = shost_priv(shost);
|
|
struct fnic *fnic = lport_priv(lp);
|
|
u32 port_speed = vnic_dev_port_speed(fnic->vdev);
|
|
|
|
/* Add in other values as they get defined in fw */
|
|
switch (port_speed) {
|
|
case 10000:
|
|
fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
|
|
break;
|
|
default:
|
|
fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *host)
|
|
{
|
|
int ret;
|
|
struct fc_lport *lp = shost_priv(host);
|
|
struct fnic *fnic = lport_priv(lp);
|
|
struct fc_host_statistics *stats = &lp->host_stats;
|
|
struct vnic_stats *vs;
|
|
unsigned long flags;
|
|
|
|
if (time_before(jiffies, fnic->stats_time + HZ / FNIC_STATS_RATE_LIMIT))
|
|
return stats;
|
|
fnic->stats_time = jiffies;
|
|
|
|
spin_lock_irqsave(&fnic->fnic_lock, flags);
|
|
ret = vnic_dev_stats_dump(fnic->vdev, &fnic->stats);
|
|
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
|
|
|
|
if (ret) {
|
|
FNIC_MAIN_DBG(KERN_DEBUG, fnic->lport->host,
|
|
"fnic: Get vnic stats failed"
|
|
" 0x%x", ret);
|
|
return stats;
|
|
}
|
|
vs = fnic->stats;
|
|
stats->tx_frames = vs->tx.tx_unicast_frames_ok;
|
|
stats->tx_words = vs->tx.tx_unicast_bytes_ok / 4;
|
|
stats->rx_frames = vs->rx.rx_unicast_frames_ok;
|
|
stats->rx_words = vs->rx.rx_unicast_bytes_ok / 4;
|
|
stats->error_frames = vs->tx.tx_errors + vs->rx.rx_errors;
|
|
stats->dumped_frames = vs->tx.tx_drops + vs->rx.rx_drop;
|
|
stats->invalid_crc_count = vs->rx.rx_crc_errors;
|
|
stats->seconds_since_last_reset = (jiffies - lp->boot_time) / HZ;
|
|
stats->fcp_input_megabytes = div_u64(fnic->fcp_input_bytes, 1000000);
|
|
stats->fcp_output_megabytes = div_u64(fnic->fcp_output_bytes, 1000000);
|
|
|
|
return stats;
|
|
}
|
|
|
|
void fnic_log_q_error(struct fnic *fnic)
|
|
{
|
|
unsigned int i;
|
|
u32 error_status;
|
|
|
|
for (i = 0; i < fnic->raw_wq_count; i++) {
|
|
error_status = ioread32(&fnic->wq[i].ctrl->error_status);
|
|
if (error_status)
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"WQ[%d] error_status"
|
|
" %d\n", i, error_status);
|
|
}
|
|
|
|
for (i = 0; i < fnic->rq_count; i++) {
|
|
error_status = ioread32(&fnic->rq[i].ctrl->error_status);
|
|
if (error_status)
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"RQ[%d] error_status"
|
|
" %d\n", i, error_status);
|
|
}
|
|
|
|
for (i = 0; i < fnic->wq_copy_count; i++) {
|
|
error_status = ioread32(&fnic->wq_copy[i].ctrl->error_status);
|
|
if (error_status)
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"CWQ[%d] error_status"
|
|
" %d\n", i, error_status);
|
|
}
|
|
}
|
|
|
|
void fnic_handle_link_event(struct fnic *fnic)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&fnic->fnic_lock, flags);
|
|
if (fnic->stop_rx_link_events) {
|
|
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
|
|
return;
|
|
}
|
|
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
|
|
|
|
queue_work(fnic_event_queue, &fnic->link_work);
|
|
|
|
}
|
|
|
|
static int fnic_notify_set(struct fnic *fnic)
|
|
{
|
|
int err;
|
|
|
|
switch (vnic_dev_get_intr_mode(fnic->vdev)) {
|
|
case VNIC_DEV_INTR_MODE_INTX:
|
|
err = vnic_dev_notify_set(fnic->vdev, FNIC_INTX_NOTIFY);
|
|
break;
|
|
case VNIC_DEV_INTR_MODE_MSI:
|
|
err = vnic_dev_notify_set(fnic->vdev, -1);
|
|
break;
|
|
case VNIC_DEV_INTR_MODE_MSIX:
|
|
err = vnic_dev_notify_set(fnic->vdev, FNIC_MSIX_ERR_NOTIFY);
|
|
break;
|
|
default:
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Interrupt mode should be set up"
|
|
" before devcmd notify set %d\n",
|
|
vnic_dev_get_intr_mode(fnic->vdev));
|
|
err = -1;
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void fnic_notify_timer(unsigned long data)
|
|
{
|
|
struct fnic *fnic = (struct fnic *)data;
|
|
|
|
fnic_handle_link_event(fnic);
|
|
mod_timer(&fnic->notify_timer,
|
|
round_jiffies(jiffies + FNIC_NOTIFY_TIMER_PERIOD));
|
|
}
|
|
|
|
static void fnic_notify_timer_start(struct fnic *fnic)
|
|
{
|
|
switch (vnic_dev_get_intr_mode(fnic->vdev)) {
|
|
case VNIC_DEV_INTR_MODE_MSI:
|
|
/*
|
|
* Schedule first timeout immediately. The driver is
|
|
* initiatialized and ready to look for link up notification
|
|
*/
|
|
mod_timer(&fnic->notify_timer, jiffies);
|
|
break;
|
|
default:
|
|
/* Using intr for notification for INTx/MSI-X */
|
|
break;
|
|
};
|
|
}
|
|
|
|
static int fnic_dev_wait(struct vnic_dev *vdev,
|
|
int (*start)(struct vnic_dev *, int),
|
|
int (*finished)(struct vnic_dev *, int *),
|
|
int arg)
|
|
{
|
|
unsigned long time;
|
|
int done;
|
|
int err;
|
|
|
|
err = start(vdev, arg);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Wait for func to complete...2 seconds max */
|
|
time = jiffies + (HZ * 2);
|
|
do {
|
|
err = finished(vdev, &done);
|
|
if (err)
|
|
return err;
|
|
if (done)
|
|
return 0;
|
|
schedule_timeout_uninterruptible(HZ / 10);
|
|
} while (time_after(time, jiffies));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int fnic_cleanup(struct fnic *fnic)
|
|
{
|
|
unsigned int i;
|
|
int err;
|
|
|
|
vnic_dev_disable(fnic->vdev);
|
|
for (i = 0; i < fnic->intr_count; i++)
|
|
vnic_intr_mask(&fnic->intr[i]);
|
|
|
|
for (i = 0; i < fnic->rq_count; i++) {
|
|
err = vnic_rq_disable(&fnic->rq[i]);
|
|
if (err)
|
|
return err;
|
|
}
|
|
for (i = 0; i < fnic->raw_wq_count; i++) {
|
|
err = vnic_wq_disable(&fnic->wq[i]);
|
|
if (err)
|
|
return err;
|
|
}
|
|
for (i = 0; i < fnic->wq_copy_count; i++) {
|
|
err = vnic_wq_copy_disable(&fnic->wq_copy[i]);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* Clean up completed IOs and FCS frames */
|
|
fnic_wq_copy_cmpl_handler(fnic, -1);
|
|
fnic_wq_cmpl_handler(fnic, -1);
|
|
fnic_rq_cmpl_handler(fnic, -1);
|
|
|
|
/* Clean up the IOs and FCS frames that have not completed */
|
|
for (i = 0; i < fnic->raw_wq_count; i++)
|
|
vnic_wq_clean(&fnic->wq[i], fnic_free_wq_buf);
|
|
for (i = 0; i < fnic->rq_count; i++)
|
|
vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
|
|
for (i = 0; i < fnic->wq_copy_count; i++)
|
|
vnic_wq_copy_clean(&fnic->wq_copy[i],
|
|
fnic_wq_copy_cleanup_handler);
|
|
|
|
for (i = 0; i < fnic->cq_count; i++)
|
|
vnic_cq_clean(&fnic->cq[i]);
|
|
for (i = 0; i < fnic->intr_count; i++)
|
|
vnic_intr_clean(&fnic->intr[i]);
|
|
|
|
mempool_destroy(fnic->io_req_pool);
|
|
for (i = 0; i < FNIC_SGL_NUM_CACHES; i++)
|
|
mempool_destroy(fnic->io_sgl_pool[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fnic_iounmap(struct fnic *fnic)
|
|
{
|
|
if (fnic->bar0.vaddr)
|
|
iounmap(fnic->bar0.vaddr);
|
|
}
|
|
|
|
/*
|
|
* Allocate element for mempools requiring GFP_DMA flag.
|
|
* Otherwise, checks in kmem_flagcheck() hit BUG_ON().
|
|
*/
|
|
static void *fnic_alloc_slab_dma(gfp_t gfp_mask, void *pool_data)
|
|
{
|
|
struct kmem_cache *mem = pool_data;
|
|
|
|
return kmem_cache_alloc(mem, gfp_mask | GFP_ATOMIC | GFP_DMA);
|
|
}
|
|
|
|
/**
|
|
* fnic_get_mac() - get assigned data MAC address for FIP code.
|
|
* @lport: local port.
|
|
*/
|
|
static u8 *fnic_get_mac(struct fc_lport *lport)
|
|
{
|
|
struct fnic *fnic = lport_priv(lport);
|
|
|
|
return fnic->data_src_addr;
|
|
}
|
|
|
|
static int __devinit fnic_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct Scsi_Host *host;
|
|
struct fc_lport *lp;
|
|
struct fnic *fnic;
|
|
mempool_t *pool;
|
|
int err;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Allocate SCSI Host and set up association between host,
|
|
* local port, and fnic
|
|
*/
|
|
lp = libfc_host_alloc(&fnic_host_template, sizeof(struct fnic));
|
|
if (!lp) {
|
|
printk(KERN_ERR PFX "Unable to alloc libfc local port\n");
|
|
err = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
host = lp->host;
|
|
fnic = lport_priv(lp);
|
|
fnic->lport = lp;
|
|
fnic->ctlr.lp = lp;
|
|
|
|
snprintf(fnic->name, sizeof(fnic->name) - 1, "%s%d", DRV_NAME,
|
|
host->host_no);
|
|
|
|
host->transportt = fnic_fc_transport;
|
|
|
|
err = scsi_init_shared_tag_map(host, FNIC_MAX_IO_REQ);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Unable to alloc shared tag map\n");
|
|
goto err_out_free_hba;
|
|
}
|
|
|
|
/* Setup PCI resources */
|
|
pci_set_drvdata(pdev, fnic);
|
|
|
|
fnic->pdev = pdev;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Cannot enable PCI device, aborting.\n");
|
|
goto err_out_free_hba;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_NAME);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Cannot enable PCI resources, aborting\n");
|
|
goto err_out_disable_device;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* Query PCI controller on system for DMA addressing
|
|
* limitation for the device. Try 40-bit first, and
|
|
* fail to 32-bit.
|
|
*/
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
|
|
if (err) {
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"No usable DMA configuration "
|
|
"aborting\n");
|
|
goto err_out_release_regions;
|
|
}
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Unable to obtain 32-bit DMA "
|
|
"for consistent allocations, aborting.\n");
|
|
goto err_out_release_regions;
|
|
}
|
|
} else {
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Unable to obtain 40-bit DMA "
|
|
"for consistent allocations, aborting.\n");
|
|
goto err_out_release_regions;
|
|
}
|
|
}
|
|
|
|
/* Map vNIC resources from BAR0 */
|
|
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"BAR0 not memory-map'able, aborting.\n");
|
|
err = -ENODEV;
|
|
goto err_out_release_regions;
|
|
}
|
|
|
|
fnic->bar0.vaddr = pci_iomap(pdev, 0, 0);
|
|
fnic->bar0.bus_addr = pci_resource_start(pdev, 0);
|
|
fnic->bar0.len = pci_resource_len(pdev, 0);
|
|
|
|
if (!fnic->bar0.vaddr) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Cannot memory-map BAR0 res hdr, "
|
|
"aborting.\n");
|
|
err = -ENODEV;
|
|
goto err_out_release_regions;
|
|
}
|
|
|
|
fnic->vdev = vnic_dev_register(NULL, fnic, pdev, &fnic->bar0);
|
|
if (!fnic->vdev) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"vNIC registration failed, "
|
|
"aborting.\n");
|
|
err = -ENODEV;
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
err = fnic_dev_wait(fnic->vdev, vnic_dev_open,
|
|
vnic_dev_open_done, 0);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"vNIC dev open failed, aborting.\n");
|
|
goto err_out_vnic_unregister;
|
|
}
|
|
|
|
err = vnic_dev_init(fnic->vdev, 0);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"vNIC dev init failed, aborting.\n");
|
|
goto err_out_dev_close;
|
|
}
|
|
|
|
err = vnic_dev_mac_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"vNIC get MAC addr failed \n");
|
|
goto err_out_dev_close;
|
|
}
|
|
/* set data_src for point-to-point mode and to keep it non-zero */
|
|
memcpy(fnic->data_src_addr, fnic->ctlr.ctl_src_addr, ETH_ALEN);
|
|
|
|
/* Get vNIC configuration */
|
|
err = fnic_get_vnic_config(fnic);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Get vNIC configuration failed, "
|
|
"aborting.\n");
|
|
goto err_out_dev_close;
|
|
}
|
|
host->max_lun = fnic->config.luns_per_tgt;
|
|
host->max_id = FNIC_MAX_FCP_TARGET;
|
|
host->max_cmd_len = FCOE_MAX_CMD_LEN;
|
|
|
|
fnic_get_res_counts(fnic);
|
|
|
|
err = fnic_set_intr_mode(fnic);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Failed to set intr mode, "
|
|
"aborting.\n");
|
|
goto err_out_dev_close;
|
|
}
|
|
|
|
err = fnic_alloc_vnic_resources(fnic);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Failed to alloc vNIC resources, "
|
|
"aborting.\n");
|
|
goto err_out_clear_intr;
|
|
}
|
|
|
|
|
|
/* initialize all fnic locks */
|
|
spin_lock_init(&fnic->fnic_lock);
|
|
|
|
for (i = 0; i < FNIC_WQ_MAX; i++)
|
|
spin_lock_init(&fnic->wq_lock[i]);
|
|
|
|
for (i = 0; i < FNIC_WQ_COPY_MAX; i++) {
|
|
spin_lock_init(&fnic->wq_copy_lock[i]);
|
|
fnic->wq_copy_desc_low[i] = DESC_CLEAN_LOW_WATERMARK;
|
|
fnic->fw_ack_recd[i] = 0;
|
|
fnic->fw_ack_index[i] = -1;
|
|
}
|
|
|
|
for (i = 0; i < FNIC_IO_LOCKS; i++)
|
|
spin_lock_init(&fnic->io_req_lock[i]);
|
|
|
|
fnic->io_req_pool = mempool_create_slab_pool(2, fnic_io_req_cache);
|
|
if (!fnic->io_req_pool)
|
|
goto err_out_free_resources;
|
|
|
|
pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab,
|
|
fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
|
|
if (!pool)
|
|
goto err_out_free_ioreq_pool;
|
|
fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT] = pool;
|
|
|
|
pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab,
|
|
fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
|
|
if (!pool)
|
|
goto err_out_free_dflt_pool;
|
|
fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX] = pool;
|
|
|
|
/* setup vlan config, hw inserts vlan header */
|
|
fnic->vlan_hw_insert = 1;
|
|
fnic->vlan_id = 0;
|
|
|
|
/* Initialize the FIP fcoe_ctrl struct */
|
|
fnic->ctlr.send = fnic_eth_send;
|
|
fnic->ctlr.update_mac = fnic_update_mac;
|
|
fnic->ctlr.get_src_addr = fnic_get_mac;
|
|
if (fnic->config.flags & VFCF_FIP_CAPABLE) {
|
|
shost_printk(KERN_INFO, fnic->lport->host,
|
|
"firmware supports FIP\n");
|
|
/* enable directed and multicast */
|
|
vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0);
|
|
vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS);
|
|
vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
|
|
fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO);
|
|
} else {
|
|
shost_printk(KERN_INFO, fnic->lport->host,
|
|
"firmware uses non-FIP mode\n");
|
|
fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_NON_FIP);
|
|
}
|
|
fnic->state = FNIC_IN_FC_MODE;
|
|
|
|
/* Enable hardware stripping of vlan header on ingress */
|
|
fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1);
|
|
|
|
/* Setup notification buffer area */
|
|
err = fnic_notify_set(fnic);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Failed to alloc notify buffer, aborting.\n");
|
|
goto err_out_free_max_pool;
|
|
}
|
|
|
|
/* Setup notify timer when using MSI interrupts */
|
|
if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
|
|
setup_timer(&fnic->notify_timer,
|
|
fnic_notify_timer, (unsigned long)fnic);
|
|
|
|
/* allocate RQ buffers and post them to RQ*/
|
|
for (i = 0; i < fnic->rq_count; i++) {
|
|
err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"fnic_alloc_rq_frame can't alloc "
|
|
"frame\n");
|
|
goto err_out_free_rq_buf;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initialization done with PCI system, hardware, firmware.
|
|
* Add host to SCSI
|
|
*/
|
|
err = scsi_add_host(lp->host, &pdev->dev);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"fnic: scsi_add_host failed...exiting\n");
|
|
goto err_out_free_rq_buf;
|
|
}
|
|
|
|
/* Start local port initiatialization */
|
|
|
|
lp->link_up = 0;
|
|
|
|
lp->max_retry_count = fnic->config.flogi_retries;
|
|
lp->max_rport_retry_count = fnic->config.plogi_retries;
|
|
lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
|
|
FCP_SPPF_CONF_COMPL);
|
|
if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR)
|
|
lp->service_params |= FCP_SPPF_RETRY;
|
|
|
|
lp->boot_time = jiffies;
|
|
lp->e_d_tov = fnic->config.ed_tov;
|
|
lp->r_a_tov = fnic->config.ra_tov;
|
|
lp->link_supported_speeds = FC_PORTSPEED_10GBIT;
|
|
fc_set_wwnn(lp, fnic->config.node_wwn);
|
|
fc_set_wwpn(lp, fnic->config.port_wwn);
|
|
|
|
fcoe_libfc_config(lp, &fnic->ctlr, &fnic_transport_template, 0);
|
|
|
|
if (!fc_exch_mgr_alloc(lp, FC_CLASS_3, FCPIO_HOST_EXCH_RANGE_START,
|
|
FCPIO_HOST_EXCH_RANGE_END, NULL)) {
|
|
err = -ENOMEM;
|
|
goto err_out_remove_scsi_host;
|
|
}
|
|
|
|
fc_lport_init_stats(lp);
|
|
|
|
fc_lport_config(lp);
|
|
|
|
if (fc_set_mfs(lp, fnic->config.maxdatafieldsize +
|
|
sizeof(struct fc_frame_header))) {
|
|
err = -EINVAL;
|
|
goto err_out_free_exch_mgr;
|
|
}
|
|
fc_host_maxframe_size(lp->host) = lp->mfs;
|
|
|
|
sprintf(fc_host_symbolic_name(lp->host),
|
|
DRV_NAME " v" DRV_VERSION " over %s", fnic->name);
|
|
|
|
spin_lock_irqsave(&fnic_list_lock, flags);
|
|
list_add_tail(&fnic->list, &fnic_list);
|
|
spin_unlock_irqrestore(&fnic_list_lock, flags);
|
|
|
|
INIT_WORK(&fnic->link_work, fnic_handle_link);
|
|
INIT_WORK(&fnic->frame_work, fnic_handle_frame);
|
|
skb_queue_head_init(&fnic->frame_queue);
|
|
skb_queue_head_init(&fnic->tx_queue);
|
|
|
|
/* Enable all queues */
|
|
for (i = 0; i < fnic->raw_wq_count; i++)
|
|
vnic_wq_enable(&fnic->wq[i]);
|
|
for (i = 0; i < fnic->rq_count; i++)
|
|
vnic_rq_enable(&fnic->rq[i]);
|
|
for (i = 0; i < fnic->wq_copy_count; i++)
|
|
vnic_wq_copy_enable(&fnic->wq_copy[i]);
|
|
|
|
fc_fabric_login(lp);
|
|
|
|
vnic_dev_enable(fnic->vdev);
|
|
|
|
err = fnic_request_intr(fnic);
|
|
if (err) {
|
|
shost_printk(KERN_ERR, fnic->lport->host,
|
|
"Unable to request irq.\n");
|
|
goto err_out_free_exch_mgr;
|
|
}
|
|
|
|
for (i = 0; i < fnic->intr_count; i++)
|
|
vnic_intr_unmask(&fnic->intr[i]);
|
|
|
|
fnic_notify_timer_start(fnic);
|
|
|
|
return 0;
|
|
|
|
err_out_free_exch_mgr:
|
|
fc_exch_mgr_free(lp);
|
|
err_out_remove_scsi_host:
|
|
fc_remove_host(lp->host);
|
|
scsi_remove_host(lp->host);
|
|
err_out_free_rq_buf:
|
|
for (i = 0; i < fnic->rq_count; i++)
|
|
vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
|
|
vnic_dev_notify_unset(fnic->vdev);
|
|
err_out_free_max_pool:
|
|
mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX]);
|
|
err_out_free_dflt_pool:
|
|
mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT]);
|
|
err_out_free_ioreq_pool:
|
|
mempool_destroy(fnic->io_req_pool);
|
|
err_out_free_resources:
|
|
fnic_free_vnic_resources(fnic);
|
|
err_out_clear_intr:
|
|
fnic_clear_intr_mode(fnic);
|
|
err_out_dev_close:
|
|
vnic_dev_close(fnic->vdev);
|
|
err_out_vnic_unregister:
|
|
vnic_dev_unregister(fnic->vdev);
|
|
err_out_iounmap:
|
|
fnic_iounmap(fnic);
|
|
err_out_release_regions:
|
|
pci_release_regions(pdev);
|
|
err_out_disable_device:
|
|
pci_disable_device(pdev);
|
|
err_out_free_hba:
|
|
scsi_host_put(lp->host);
|
|
err_out:
|
|
return err;
|
|
}
|
|
|
|
static void __devexit fnic_remove(struct pci_dev *pdev)
|
|
{
|
|
struct fnic *fnic = pci_get_drvdata(pdev);
|
|
struct fc_lport *lp = fnic->lport;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Mark state so that the workqueue thread stops forwarding
|
|
* received frames and link events to the local port. ISR and
|
|
* other threads that can queue work items will also stop
|
|
* creating work items on the fnic workqueue
|
|
*/
|
|
spin_lock_irqsave(&fnic->fnic_lock, flags);
|
|
fnic->stop_rx_link_events = 1;
|
|
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
|
|
|
|
if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
|
|
del_timer_sync(&fnic->notify_timer);
|
|
|
|
/*
|
|
* Flush the fnic event queue. After this call, there should
|
|
* be no event queued for this fnic device in the workqueue
|
|
*/
|
|
flush_workqueue(fnic_event_queue);
|
|
skb_queue_purge(&fnic->frame_queue);
|
|
skb_queue_purge(&fnic->tx_queue);
|
|
|
|
/*
|
|
* Log off the fabric. This stops all remote ports, dns port,
|
|
* logs off the fabric. This flushes all rport, disc, lport work
|
|
* before returning
|
|
*/
|
|
fc_fabric_logoff(fnic->lport);
|
|
|
|
spin_lock_irqsave(&fnic->fnic_lock, flags);
|
|
fnic->in_remove = 1;
|
|
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
|
|
|
|
fcoe_ctlr_destroy(&fnic->ctlr);
|
|
fc_lport_destroy(lp);
|
|
|
|
/*
|
|
* This stops the fnic device, masks all interrupts. Completed
|
|
* CQ entries are drained. Posted WQ/RQ/Copy-WQ entries are
|
|
* cleaned up
|
|
*/
|
|
fnic_cleanup(fnic);
|
|
|
|
BUG_ON(!skb_queue_empty(&fnic->frame_queue));
|
|
BUG_ON(!skb_queue_empty(&fnic->tx_queue));
|
|
|
|
spin_lock_irqsave(&fnic_list_lock, flags);
|
|
list_del(&fnic->list);
|
|
spin_unlock_irqrestore(&fnic_list_lock, flags);
|
|
|
|
fc_remove_host(fnic->lport->host);
|
|
scsi_remove_host(fnic->lport->host);
|
|
fc_exch_mgr_free(fnic->lport);
|
|
vnic_dev_notify_unset(fnic->vdev);
|
|
fnic_free_intr(fnic);
|
|
fnic_free_vnic_resources(fnic);
|
|
fnic_clear_intr_mode(fnic);
|
|
vnic_dev_close(fnic->vdev);
|
|
vnic_dev_unregister(fnic->vdev);
|
|
fnic_iounmap(fnic);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
scsi_host_put(lp->host);
|
|
}
|
|
|
|
static struct pci_driver fnic_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = fnic_id_table,
|
|
.probe = fnic_probe,
|
|
.remove = __devexit_p(fnic_remove),
|
|
};
|
|
|
|
static int __init fnic_init_module(void)
|
|
{
|
|
size_t len;
|
|
int err = 0;
|
|
|
|
printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION);
|
|
|
|
/* Create a cache for allocation of default size sgls */
|
|
len = sizeof(struct fnic_dflt_sgl_list);
|
|
fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create
|
|
("fnic_sgl_dflt", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN,
|
|
SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA,
|
|
NULL);
|
|
if (!fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]) {
|
|
printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n");
|
|
err = -ENOMEM;
|
|
goto err_create_fnic_sgl_slab_dflt;
|
|
}
|
|
|
|
/* Create a cache for allocation of max size sgls*/
|
|
len = sizeof(struct fnic_sgl_list);
|
|
fnic_sgl_cache[FNIC_SGL_CACHE_MAX] = kmem_cache_create
|
|
("fnic_sgl_max", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN,
|
|
SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA,
|
|
NULL);
|
|
if (!fnic_sgl_cache[FNIC_SGL_CACHE_MAX]) {
|
|
printk(KERN_ERR PFX "failed to create fnic max sgl slab\n");
|
|
err = -ENOMEM;
|
|
goto err_create_fnic_sgl_slab_max;
|
|
}
|
|
|
|
/* Create a cache of io_req structs for use via mempool */
|
|
fnic_io_req_cache = kmem_cache_create("fnic_io_req",
|
|
sizeof(struct fnic_io_req),
|
|
0, SLAB_HWCACHE_ALIGN, NULL);
|
|
if (!fnic_io_req_cache) {
|
|
printk(KERN_ERR PFX "failed to create fnic io_req slab\n");
|
|
err = -ENOMEM;
|
|
goto err_create_fnic_ioreq_slab;
|
|
}
|
|
|
|
fnic_event_queue = create_singlethread_workqueue("fnic_event_wq");
|
|
if (!fnic_event_queue) {
|
|
printk(KERN_ERR PFX "fnic work queue create failed\n");
|
|
err = -ENOMEM;
|
|
goto err_create_fnic_workq;
|
|
}
|
|
|
|
spin_lock_init(&fnic_list_lock);
|
|
INIT_LIST_HEAD(&fnic_list);
|
|
|
|
fnic_fc_transport = fc_attach_transport(&fnic_fc_functions);
|
|
if (!fnic_fc_transport) {
|
|
printk(KERN_ERR PFX "fc_attach_transport error\n");
|
|
err = -ENOMEM;
|
|
goto err_fc_transport;
|
|
}
|
|
|
|
/* register the driver with PCI system */
|
|
err = pci_register_driver(&fnic_driver);
|
|
if (err < 0) {
|
|
printk(KERN_ERR PFX "pci register error\n");
|
|
goto err_pci_register;
|
|
}
|
|
return err;
|
|
|
|
err_pci_register:
|
|
fc_release_transport(fnic_fc_transport);
|
|
err_fc_transport:
|
|
destroy_workqueue(fnic_event_queue);
|
|
err_create_fnic_workq:
|
|
kmem_cache_destroy(fnic_io_req_cache);
|
|
err_create_fnic_ioreq_slab:
|
|
kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
|
|
err_create_fnic_sgl_slab_max:
|
|
kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
|
|
err_create_fnic_sgl_slab_dflt:
|
|
return err;
|
|
}
|
|
|
|
static void __exit fnic_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&fnic_driver);
|
|
destroy_workqueue(fnic_event_queue);
|
|
kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
|
|
kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
|
|
kmem_cache_destroy(fnic_io_req_cache);
|
|
fc_release_transport(fnic_fc_transport);
|
|
}
|
|
|
|
module_init(fnic_init_module);
|
|
module_exit(fnic_cleanup_module);
|
|
|