AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
e66890a96a
kernel_optimize_test/drivers/bluetooth/btbcm.c
Frederic Danis 75e167e6f0 Bluetooth: btbcm: Add helper functions for UART setup 
Firmware loading may reset the controller UART speed and needs to set
host UART speed back to init speed.

UART drivers setup is split in 3 parts:
- btbcm_initialize() resets the controller and returns the firmware
  name based on controller revision and sub_version.
- btbtcm_patchram() (already existing and public), which takes the
  firmware name as parameter, requests the firmware and loads it to
  the controller.
- btbcm_finalize() which resets the controller, reads local version
  and checks if the controller address is a default one or not.

Remove firmware name retrieval for UART controllers from
btbcm_setup_patchram().

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 07:33:25 +02:00

490 lines
11 KiB
C
Raw Blame History

/*
*
* Bluetooth support for Broadcom devices
*
* Copyright (C) 2015 Intel Corporation
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/firmware.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btbcm.h"
#define VERSION "0.1"
#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
int btbcm_check_bdaddr(struct hci_dev *hdev)
{
struct hci_rp_read_bd_addr *bda;
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
BT_ERR("%s: BCM: Reading device address failed (%d)",
hdev->name, err);
return err;
}
if (skb->len != sizeof(*bda)) {
BT_ERR("%s: BCM: Device address length mismatch", hdev->name);
kfree_skb(skb);
return -EIO;
}
bda = (struct hci_rp_read_bd_addr *)skb->data;
/* Check if the address indicates a controller with either an
* invalid or default address. In both cases the device needs
* to be marked as not having a valid address.
*
* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
* with no configured address.
*
* The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
* with waiting for configuration state.
*/
if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4324B3)) {
BT_INFO("%s: BCM: Using default device address (%pMR)",
hdev->name, &bda->bdaddr);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_check_bdaddr);
int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
int err;
skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
BT_ERR("%s: BCM: Change address command failed (%d)",
hdev->name, err);
return err;
}
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
const struct hci_command_hdr *cmd;
const u8 *fw_ptr;
size_t fw_size;
struct sk_buff *skb;
u16 opcode;
int err = 0;
/* Start Download */
skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
BT_ERR("%s: BCM: Download Minidrv command failed (%d)",
hdev->name, err);
goto done;
}
kfree_skb(skb);
/* 50 msec delay after Download Minidrv completes */
msleep(50);
fw_ptr = fw->data;
fw_size = fw->size;
while (fw_size >= sizeof(*cmd)) {
const u8 *cmd_param;
cmd = (struct hci_command_hdr *)fw_ptr;
fw_ptr += sizeof(*cmd);
fw_size -= sizeof(*cmd);
if (fw_size < cmd->plen) {
BT_ERR("%s: BCM: Patch is corrupted", hdev->name);
err = -EINVAL;
goto done;
}
cmd_param = fw_ptr;
fw_ptr += cmd->plen;
fw_size -= cmd->plen;
opcode = le16_to_cpu(cmd->opcode);
skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
BT_ERR("%s: BCM: Patch command %04x failed (%d)",
hdev->name, opcode, err);
goto done;
}
kfree_skb(skb);
}
/* 250 msec delay after Launch Ram completes */
msleep(250);
done:
return err;
}
EXPORT_SYMBOL(btbcm_patchram);
static int btbcm_reset(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
BT_ERR("%s: BCM: Reset failed (%d)", hdev->name, err);
return err;
}
kfree_skb(skb);
return 0;
}
static struct sk_buff *btbcm_read_local_version(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: BCM: Reading local version info failed (%ld)",
hdev->name, PTR_ERR(skb));
return skb;
}
if (skb->len != sizeof(struct hci_rp_read_local_version)) {
BT_ERR("%s: BCM: Local version length mismatch", hdev->name);
kfree_skb(skb);
return ERR_PTR(-EIO);
}
return skb;
}
static struct sk_buff *btbcm_read_verbose_config(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, 0xfc79, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: BCM: Read verbose config info failed (%ld)",
hdev->name, PTR_ERR(skb));
return skb;
}
if (skb->len != 7) {
BT_ERR("%s: BCM: Verbose config length mismatch", hdev->name);
kfree_skb(skb);
return ERR_PTR(-EIO);
}
return skb;
}
static struct sk_buff *btbcm_read_usb_product(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, 0xfc5a, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: BCM: Read USB product info failed (%ld)",
hdev->name, PTR_ERR(skb));
return skb;
}
if (skb->len != 5) {
BT_ERR("%s: BCM: USB product length mismatch", hdev->name);
kfree_skb(skb);
return ERR_PTR(-EIO);
}
return skb;
}
static const struct {
u16 subver;
const char *name;
} bcm_uart_subver_table[] = {
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
{ 0x4406, "BCM4324B3" }, /* 002.004.006 */
{ }
};
int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len)
{
u16 subver, rev;
const char *hw_name = NULL;
struct sk_buff *skb;
struct hci_rp_read_local_version *ver;
int i, err;
/* Reset */
err = btbcm_reset(hdev);
if (err)
return err;
/* Read Local Version Info */
skb = btbcm_read_local_version(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
/* Read Verbose Config Version Info */
skb = btbcm_read_verbose_config(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
kfree_skb(skb);
switch ((rev & 0xf000) >> 12) {
case 0:
case 3:
for (i = 0; bcm_uart_subver_table[i].name; i++) {
if (subver == bcm_uart_subver_table[i].subver) {
hw_name = bcm_uart_subver_table[i].name;
break;
}
}
snprintf(fw_name, len, "brcm/%s.hcd", hw_name ? : "BCM");
break;
default:
return 0;
}
BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
hw_name ? : "BCM", (subver & 0x7000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_initialize);
int btbcm_finalize(struct hci_dev *hdev)
{
struct sk_buff *skb;
struct hci_rp_read_local_version *ver;
u16 subver, rev;
int err;
/* Reset */
err = btbcm_reset(hdev);
if (err)
return err;
/* Read Local Version Info */
skb = btbcm_read_local_version(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
BT_INFO("%s: BCM (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
(subver & 0x7000) >> 13, (subver & 0x1f00) >> 8,
(subver & 0x00ff), rev & 0x0fff);
btbcm_check_bdaddr(hdev);
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_finalize);
static const struct {
u16 subver;
const char *name;
} bcm_usb_subver_table[] = {
{ 0x210b, "BCM43142A0" }, /* 001.001.011 */
{ 0x2112, "BCM4314A0" }, /* 001.001.018 */
{ 0x2118, "BCM20702A0" }, /* 001.001.024 */
{ 0x2126, "BCM4335A0" }, /* 001.001.038 */
{ 0x220e, "BCM20702A1" }, /* 001.002.014 */
{ 0x230f, "BCM4354A2" }, /* 001.003.015 */
{ 0x4106, "BCM4335B0" }, /* 002.001.006 */
{ 0x410e, "BCM20702B0" }, /* 002.001.014 */
{ 0x6109, "BCM4335C0" }, /* 003.001.009 */
{ 0x610c, "BCM4354" }, /* 003.001.012 */
{ }
};
int btbcm_setup_patchram(struct hci_dev *hdev)
{
char fw_name[64];
const struct firmware *fw;
u16 subver, rev, pid, vid;
const char *hw_name = NULL;
struct sk_buff *skb;
struct hci_rp_read_local_version *ver;
int i, err;
/* Reset */
err = btbcm_reset(hdev);
if (err)
return err;
/* Read Local Version Info */
skb = btbcm_read_local_version(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
/* Read Verbose Config Version Info */
skb = btbcm_read_verbose_config(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
kfree_skb(skb);
switch ((rev & 0xf000) >> 12) {
case 0:
case 3:
for (i = 0; bcm_uart_subver_table[i].name; i++) {
if (subver == bcm_uart_subver_table[i].subver) {
hw_name = bcm_uart_subver_table[i].name;
break;
}
}
snprintf(fw_name, sizeof(fw_name), "brcm/%s.hcd",
hw_name ? : "BCM");
break;
case 1:
case 2:
/* Read USB Product Info */
skb = btbcm_read_usb_product(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
vid = get_unaligned_le16(skb->data + 1);
pid = get_unaligned_le16(skb->data + 3);
kfree_skb(skb);
for (i = 0; bcm_usb_subver_table[i].name; i++) {
if (subver == bcm_usb_subver_table[i].subver) {
hw_name = bcm_usb_subver_table[i].name;
break;
}
}
snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd",
hw_name ? : "BCM", vid, pid);
break;
default:
return 0;
}
BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
hw_name ? : "BCM", (subver & 0x7000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
err = request_firmware(&fw, fw_name, &hdev->dev);
if (err < 0) {
BT_INFO("%s: BCM: Patch %s not found", hdev->name, fw_name);
return 0;
}
btbcm_patchram(hdev, fw);
release_firmware(fw);
/* Reset */
err = btbcm_reset(hdev);
if (err)
return err;
/* Read Local Version Info */
skb = btbcm_read_local_version(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
hw_name ? : "BCM", (subver & 0x7000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
btbcm_check_bdaddr(hdev);
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
int btbcm_setup_apple(struct hci_dev *hdev)
{
struct sk_buff *skb;
/* Read Verbose Config Version Info */
skb = btbcm_read_verbose_config(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
get_unaligned_le16(skb->data + 5));
kfree_skb(skb);
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_setup_apple);
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth support for Broadcom devices ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink