forked from luck/tmp_suning_uos_patched
e90ddd813d
Currently the iop3xx platform support code assumes that RedBoot is the bootloader and has already initialized the ATU. Linux should handle this initialization for three reasons: 1/ The memory map that RedBoot sets up is not optimal (page_to_dma and virt_to_phys return different addresses). The effect of this is that using the dma mapping API for the internal bus dma units generates pci bus addresses that are incorrect for the internal bus. 2/ Not all iop platforms use RedBoot 3/ If the ATU is already initialized it indicates that the iop is an add-in card in another host, it does not own the PCI bus, and should not be re-initialized. Changelog: * rather than change nr_controllers to zero, simply do not call pci_common_init Cc: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
340 lines
7.6 KiB
C
340 lines
7.6 KiB
C
/*
|
|
* arch/arm/mach-iop32x/iq31244.c
|
|
*
|
|
* Board support code for the Intel EP80219 and IQ31244 platforms.
|
|
*
|
|
* Author: Rory Bolt <rorybolt@pacbell.net>
|
|
* Copyright (C) 2002 Rory Bolt
|
|
* Copyright 2003 (c) MontaVista, Software, Inc.
|
|
* Copyright (C) 2004 Intel Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/mm.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/platform_device.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/page.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/arch/time.h>
|
|
|
|
/*
|
|
* Until March of 2007 iq31244 platforms and ep80219 platforms shared the
|
|
* same machine id, and the processor type was used to select board type.
|
|
* However this assumption breaks for an iq80219 board which is an iop219
|
|
* processor on an iq31244 board. The force_ep80219 flag has been added
|
|
* for old boot loaders using the iq31244 machine id for an ep80219 platform.
|
|
*/
|
|
static int force_ep80219;
|
|
|
|
static int is_80219(void)
|
|
{
|
|
extern int processor_id;
|
|
return !!((processor_id & 0xffffffe0) == 0x69052e20);
|
|
}
|
|
|
|
static int is_ep80219(void)
|
|
{
|
|
if (machine_is_ep80219() || force_ep80219)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* EP80219/IQ31244 timer tick configuration.
|
|
*/
|
|
static void __init iq31244_timer_init(void)
|
|
{
|
|
if (is_ep80219()) {
|
|
/* 33.333 MHz crystal. */
|
|
iop_init_time(200000000);
|
|
} else {
|
|
/* 33.000 MHz crystal. */
|
|
iop_init_time(198000000);
|
|
}
|
|
}
|
|
|
|
static struct sys_timer iq31244_timer = {
|
|
.init = iq31244_timer_init,
|
|
.offset = iop_gettimeoffset,
|
|
};
|
|
|
|
|
|
/*
|
|
* IQ31244 I/O.
|
|
*/
|
|
static struct map_desc iq31244_io_desc[] __initdata = {
|
|
{ /* on-board devices */
|
|
.virtual = IQ31244_UART,
|
|
.pfn = __phys_to_pfn(IQ31244_UART),
|
|
.length = 0x00100000,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
void __init iq31244_map_io(void)
|
|
{
|
|
iop3xx_map_io();
|
|
iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
|
|
}
|
|
|
|
|
|
/*
|
|
* EP80219/IQ31244 PCI.
|
|
*/
|
|
static inline int __init
|
|
ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
if (slot == 0) {
|
|
/* CFlash */
|
|
irq = IRQ_IOP32X_XINT1;
|
|
} else if (slot == 1) {
|
|
/* 82551 Pro 100 */
|
|
irq = IRQ_IOP32X_XINT0;
|
|
} else if (slot == 2) {
|
|
/* PCI-X Slot */
|
|
irq = IRQ_IOP32X_XINT3;
|
|
} else if (slot == 3) {
|
|
/* SATA */
|
|
irq = IRQ_IOP32X_XINT2;
|
|
} else {
|
|
printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
|
|
"device PCI:%d:%d:%d\n", dev->bus->number,
|
|
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
|
|
irq = -1;
|
|
}
|
|
|
|
return irq;
|
|
}
|
|
|
|
static struct hw_pci ep80219_pci __initdata = {
|
|
.swizzle = pci_std_swizzle,
|
|
.nr_controllers = 1,
|
|
.setup = iop3xx_pci_setup,
|
|
.preinit = iop3xx_pci_preinit,
|
|
.scan = iop3xx_pci_scan_bus,
|
|
.map_irq = ep80219_pci_map_irq,
|
|
};
|
|
|
|
static inline int __init
|
|
iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
if (slot == 0) {
|
|
/* CFlash */
|
|
irq = IRQ_IOP32X_XINT1;
|
|
} else if (slot == 1) {
|
|
/* SATA */
|
|
irq = IRQ_IOP32X_XINT2;
|
|
} else if (slot == 2) {
|
|
/* PCI-X Slot */
|
|
irq = IRQ_IOP32X_XINT3;
|
|
} else if (slot == 3) {
|
|
/* 82546 GigE */
|
|
irq = IRQ_IOP32X_XINT0;
|
|
} else {
|
|
printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
|
|
"device PCI:%d:%d:%d\n", dev->bus->number,
|
|
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
|
|
irq = -1;
|
|
}
|
|
|
|
return irq;
|
|
}
|
|
|
|
static struct hw_pci iq31244_pci __initdata = {
|
|
.swizzle = pci_std_swizzle,
|
|
.nr_controllers = 1,
|
|
.setup = iop3xx_pci_setup,
|
|
.preinit = iop3xx_pci_preinit,
|
|
.scan = iop3xx_pci_scan_bus,
|
|
.map_irq = iq31244_pci_map_irq,
|
|
};
|
|
|
|
static int __init iq31244_pci_init(void)
|
|
{
|
|
if (is_ep80219()) {
|
|
if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE)
|
|
pci_common_init(&ep80219_pci);
|
|
} else if (machine_is_iq31244()) {
|
|
if (is_80219()) {
|
|
printk("note: iq31244 board type has been selected\n");
|
|
printk("note: to select ep80219 operation:\n");
|
|
printk("\t1/ specify \"force_ep80219\" on the kernel"
|
|
" command line\n");
|
|
printk("\t2/ update boot loader to pass"
|
|
" the ep80219 id: %d\n", MACH_TYPE_EP80219);
|
|
}
|
|
|
|
if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE)
|
|
pci_common_init(&iq31244_pci);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(iq31244_pci_init);
|
|
|
|
|
|
/*
|
|
* IQ31244 machine initialisation.
|
|
*/
|
|
static struct physmap_flash_data iq31244_flash_data = {
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource iq31244_flash_resource = {
|
|
.start = 0xf0000000,
|
|
.end = 0xf07fffff,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device iq31244_flash_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &iq31244_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &iq31244_flash_resource,
|
|
};
|
|
|
|
static struct plat_serial8250_port iq31244_serial_port[] = {
|
|
{
|
|
.mapbase = IQ31244_UART,
|
|
.membase = (char *)IQ31244_UART,
|
|
.irq = IRQ_IOP32X_XINT1,
|
|
.flags = UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 0,
|
|
.uartclk = 1843200,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct resource iq31244_uart_resource = {
|
|
.start = IQ31244_UART,
|
|
.end = IQ31244_UART + 7,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device iq31244_serial_device = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev = {
|
|
.platform_data = iq31244_serial_port,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &iq31244_uart_resource,
|
|
};
|
|
|
|
/*
|
|
* This function will send a SHUTDOWN_COMPLETE message to the PIC
|
|
* controller over I2C. We are not using the i2c subsystem since
|
|
* we are going to power off and it may be removed
|
|
*/
|
|
void ep80219_power_off(void)
|
|
{
|
|
/*
|
|
* Send the Address byte w/ the start condition
|
|
*/
|
|
*IOP3XX_IDBR1 = 0x60;
|
|
*IOP3XX_ICR1 = 0xE9;
|
|
mdelay(1);
|
|
|
|
/*
|
|
* Send the START_MSG byte w/ no start or stop condition
|
|
*/
|
|
*IOP3XX_IDBR1 = 0x0F;
|
|
*IOP3XX_ICR1 = 0xE8;
|
|
mdelay(1);
|
|
|
|
/*
|
|
* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
|
|
* stop condition
|
|
*/
|
|
*IOP3XX_IDBR1 = 0x03;
|
|
*IOP3XX_ICR1 = 0xE8;
|
|
mdelay(1);
|
|
|
|
/*
|
|
* Send an ignored byte w/ stop condition
|
|
*/
|
|
*IOP3XX_IDBR1 = 0x00;
|
|
*IOP3XX_ICR1 = 0xEA;
|
|
|
|
while (1)
|
|
;
|
|
}
|
|
|
|
static void __init iq31244_init_machine(void)
|
|
{
|
|
platform_device_register(&iop3xx_i2c0_device);
|
|
platform_device_register(&iop3xx_i2c1_device);
|
|
platform_device_register(&iq31244_flash_device);
|
|
platform_device_register(&iq31244_serial_device);
|
|
|
|
if (is_ep80219())
|
|
pm_power_off = ep80219_power_off;
|
|
}
|
|
|
|
static int __init force_ep80219_setup(char *str)
|
|
{
|
|
force_ep80219 = 1;
|
|
return 1;
|
|
}
|
|
|
|
__setup("force_ep80219", force_ep80219_setup);
|
|
|
|
MACHINE_START(IQ31244, "Intel IQ31244")
|
|
/* Maintainer: Intel Corp. */
|
|
.phys_io = IQ31244_UART,
|
|
.io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
|
|
.boot_params = 0xa0000100,
|
|
.map_io = iq31244_map_io,
|
|
.init_irq = iop32x_init_irq,
|
|
.timer = &iq31244_timer,
|
|
.init_machine = iq31244_init_machine,
|
|
MACHINE_END
|
|
|
|
/* There should have been an ep80219 machine identifier from the beginning.
|
|
* Boot roms older than March 2007 do not know the ep80219 machine id. Pass
|
|
* "force_ep80219" on the kernel command line, otherwise iq31244 operation
|
|
* will be selected.
|
|
*/
|
|
MACHINE_START(EP80219, "Intel EP80219")
|
|
/* Maintainer: Intel Corp. */
|
|
.phys_io = IQ31244_UART,
|
|
.io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
|
|
.boot_params = 0xa0000100,
|
|
.map_io = iq31244_map_io,
|
|
.init_irq = iop32x_init_irq,
|
|
.timer = &iq31244_timer,
|
|
.init_machine = iq31244_init_machine,
|
|
MACHINE_END
|