forked from luck/tmp_suning_uos_patched
752451f01c
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ... |
||
---|---|---|
.. | ||
adp5588.h | ||
adp8860.h | ||
adp8870.h | ||
ads1015.h | ||
apds990x.h | ||
at24.h | ||
atmel_mxt_ts.h | ||
bh1770glc.h | ||
dm355evm_msp.h | ||
ds620.h | ||
i2c-hid.h | ||
i2c-rcar.h | ||
i2c-sh_mobile.h | ||
lm8323.h | ||
ltc4245.h | ||
max732x.h | ||
max6639.h | ||
mcs.h | ||
mms114.h | ||
mpr121_touchkey.h | ||
pca953x.h | ||
pca954x.h | ||
pcf857x.h | ||
pmbus.h | ||
pxa-i2c.h | ||
s6000.h | ||
sx150x.h | ||
tc35876x.h | ||
tps65010.h | ||
tsc2007.h | ||
twl4030-madc.h | ||
twl.h |