kernel_optimize_test

Go to file

Bryan O'Donoghue eeefa2eae8 media: venus: core, venc, vdec: Fix probe dependency error [ Upstream commit 08b1cf474b7f72750adebe0f0a35f8e9a3eb75f6 ] Commit `aaaa93eda6` ("media] media: venus: venc: add video encoder files") is the last in a series of three commits to add core.c vdec.c and venc.c adding core, encoder and decoder. The encoder and decoder check for core drvdata as set and return -EPROBE_DEFER if it has not been set, however both the encoder and decoder rely on core.v4l2_dev as valid. core.v4l2_dev will not be valid until v4l2_device_register() has completed in core.c's probe(). Normally this is never seen however, Dmitry reported the following backtrace when compiling drivers and firmware directly into a kernel image. [ 5.259968] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 5.269850] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes [ 5.275505] Workqueue: events deferred_probe_work_func [ 5.275513] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 5.441211] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using xhci-hcd [ 5.442486] pc : refcount_warn_saturate+0x140/0x148 [ 5.493756] hub 2-1:1.0: USB hub found [ 5.496266] lr : refcount_warn_saturate+0x140/0x148 [ 5.500982] hub 2-1:1.0: 4 ports detected [ 5.503440] sp : ffff80001067b730 [ 5.503442] x29: ffff80001067b730 [ 5.592660] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.598478] x28: ffff6c6bc1c379b8 [ 5.598480] x27: ffffa5c673852960 x26: ffffa5c673852000 [ 5.598484] x25: ffff6c6bc1c37800 x24: 0000000000000001 [ 5.810652] x23: 0000000000000000 x22: ffffa5c673bc7118 [ 5.813777] hub 1-1:1.0: USB hub found [ 5.816108] x21: ffffa5c674440000 x20: 0000000000000001 [ 5.820846] hub 1-1:1.0: 4 ports detected [ 5.825415] x19: ffffa5c6744f4000 x18: ffffffffffffffff [ 5.825418] x17: 0000000000000000 x16: 0000000000000000 [ 5.825421] x15: 00000a4810c193ba x14: 0000000000000000 [ 5.825424] x13: 00000000000002b8 x12: 000000000000f20a [ 5.825427] x11: 000000000000f20a x10: 0000000000000038 [ 5.845447] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 5.845904] [ 5.845905] x9 : 0000000000000000 x8 : ffff6c6d36fae780 [ 5.871208] x7 : ffff6c6d36faf240 x6 : 0000000000000000 [ 5.876664] x5 : 0000000000000004 x4 : 0000000000000085 [ 5.882121] x3 : 0000000000000119 x2 : ffffa5c6741ef478 [ 5.887578] x1 : 3acbb3926faf5f00 x0 : 0000000000000000 [ 5.893036] Call trace: [ 5.895551] refcount_warn_saturate+0x140/0x148 [ 5.900202] __video_register_device+0x64c/0xd10 [ 5.904944] venc_probe+0xc4/0x148 [ 5.908444] platform_probe+0x68/0xe0 [ 5.912210] really_probe+0x118/0x3e0 [ 5.915977] driver_probe_device+0x5c/0xc0 [ 5.920187] __device_attach_driver+0x98/0xb8 [ 5.924661] bus_for_each_drv+0x68/0xd0 [ 5.928604] __device_attach+0xec/0x148 [ 5.932547] device_initial_probe+0x14/0x20 [ 5.936845] bus_probe_device+0x9c/0xa8 [ 5.940788] device_add+0x3e8/0x7c8 [ 5.944376] of_device_add+0x4c/0x60 [ 5.948056] of_platform_device_create_pdata+0xbc/0x140 [ 5.953425] of_platform_bus_create+0x17c/0x3c0 [ 5.958078] of_platform_populate+0x80/0x110 [ 5.962463] venus_probe+0x2ec/0x4d8 [ 5.966143] platform_probe+0x68/0xe0 [ 5.969907] really_probe+0x118/0x3e0 [ 5.973674] driver_probe_device+0x5c/0xc0 [ 5.977882] __device_attach_driver+0x98/0xb8 [ 5.982356] bus_for_each_drv+0x68/0xd0 [ 5.986298] __device_attach+0xec/0x148 [ 5.990242] device_initial_probe+0x14/0x20 [ 5.994539] bus_probe_device+0x9c/0xa8 [ 5.998481] deferred_probe_work_func+0x74/0xb0 [ 6.003132] process_one_work+0x1e8/0x360 [ 6.007254] worker_thread+0x208/0x478 [ 6.011106] kthread+0x150/0x158 [ 6.014431] ret_from_fork+0x10/0x30 [ 6.018111] ---[ end trace f074246b1ecdb466 ]--- This patch fixes by - Only setting drvdata after v4l2_device_register() completes - Moving v4l2_device_register() so that suspend/reume in core::probe() stays as-is - Changes pm_ops->core_function() to take struct venus_core not struct device - Minimal rework of v4l2_device_*register in probe/remove Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>		2022-01-27 10:53:51 +01:00
arch	arm64: dts: ti: k3-j721e: correct cache-sets info	2022-01-27 10:53:50 +01:00
block
certs
crypto
Documentation	bpf: Add kconfig knob for disabling unpriv bpf by default	2022-01-05 12:40:34 +01:00
drivers	media: venus: core, venc, vdec: Fix probe dependency error	2022-01-27 10:53:51 +01:00
fs	fs: dlm: fix build with CONFIG_IPV6 disabled	2022-01-27 10:53:49 +01:00
include	mm_zone: add function to check if managed dma zone exists	2022-01-27 10:53:44 +01:00
init	bpf: Add kconfig knob for disabling unpriv bpf by default	2022-01-05 12:40:34 +01:00
ipc
kernel	dma/pool: create dma atomic pool only if dma zone has managed pages	2022-01-27 10:53:44 +01:00
lib
LICENSES
mm	shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode	2022-01-27 10:53:44 +01:00
net	Bluetooth: stop proccessing malicious adv data	2022-01-27 10:53:48 +01:00
samples	ftrace/samples: Add missing prototypes direct functions	2022-01-11 15:25:00 +01:00
scripts	recordmcount.pl: fix typo in s390 mcount regex	2022-01-05 12:40:29 +01:00
security	selinux: initialize proto variable in selinux_ip_postroute_compat()	2022-01-05 12:40:30 +01:00
sound	ALSA: hda/realtek: Re-order quirk entries for Lenovo	2022-01-20 09:17:51 +01:00
tools	tools/nolibc: fix incorrect truncation of exit code	2022-01-27 10:53:42 +01:00
usr
virt
.clang-format
.cocciconfig
.get_maintainer.ignore
.gitattributes
.gitignore
.mailmap
COPYING
CREDITS
Kbuild
Kconfig
MAINTAINERS
Makefile	Linux 5.10.93	2022-01-20 09:17:52 +01:00
README

README

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.