Maciej W. Rozycki f02cf4691e MIPS: DEC: Implement FPU interrupt counter ... Implement a cheap way to count FPU interrupts for R2k/R3k DECstation systems. Do this manually in handcoded assembly, rather than calling `kstat_incr_irq_this_cpu' that would require setting up a stack frame and a lot of redirection. This is not going to be a problem because the FPU interrupt is local to the CPU and also there is one CPU only anyway. So at bootstrap determine the address of the correct location within `struct irq_desc', and then only refer to it directly in the interrupt handler. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9713/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>		2015-04-08 01:10:45 +02:00
..
prom	MIPS: DEC/SNI: O32 wrapper stack switching fixes	2014-05-13 00:29:35 +02:00
ecc-berr.c	MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes	2014-05-13 00:29:35 +02:00
int-handler.S	MIPS: DEC: Implement FPU interrupt counter	2015-04-08 01:10:45 +02:00
ioasic-irq.c
kn01-berr.c
kn02-irq.c
kn02xa-berr.c	MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes	2014-05-13 00:29:35 +02:00
Makefile	arch/mips/dec: switch DECstation systems to rtc-cmos	2014-06-06 16:08:07 -07:00
Platform
platform.c	arch/mips/dec: switch DECstation systems to rtc-cmos	2014-06-06 16:08:07 -07:00
reset.c
setup.c	MIPS: DEC: Implement FPU interrupt counter	2015-04-08 01:10:45 +02:00
tc.c
time.c
wbflush.c