forked from luck/tmp_suning_uos_patched
54a702f705
GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.
Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped
A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.
.SECONDARY
Prerequisites of this special target are treated as intermediate
files but are never automatically deleted.
.PRECIOUS
When make is interrupted during execution, it may delete the target
file it is updating if the file was modified since make started.
If you mark the file as precious, make will never delete the file
if interrupted.
Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.
The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.
Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.
.PRECIOUS: $(obj)/%.lex.c
works, but
.SECONDARY: $(obj)/%.lex.c
has no effect. However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.
The targets specified as .SECONDARY must be explicit. $(targets)
contains all targets that need to include .*.cmd files. So, the
intermediates you want to keep are mostly in there. Therefore, mark
$(targets) as .SECONDARY. It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.
I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
420 lines
14 KiB
Makefile
420 lines
14 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
# Backward compatibility
|
|
asflags-y += $(EXTRA_AFLAGS)
|
|
ccflags-y += $(EXTRA_CFLAGS)
|
|
cppflags-y += $(EXTRA_CPPFLAGS)
|
|
ldflags-y += $(EXTRA_LDFLAGS)
|
|
|
|
# flags that take effect in current and sub directories
|
|
KBUILD_AFLAGS += $(subdir-asflags-y)
|
|
KBUILD_CFLAGS += $(subdir-ccflags-y)
|
|
|
|
# Figure out what we need to build from the various variables
|
|
# ===========================================================================
|
|
|
|
# When an object is listed to be built compiled-in and modular,
|
|
# only build the compiled-in version
|
|
obj-m := $(filter-out $(obj-y),$(obj-m))
|
|
|
|
# Libraries are always collected in one lib file.
|
|
# Filter out objects already built-in
|
|
lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
|
|
|
|
# Determine modorder.
|
|
# Unfortunately, we don't have information about ordering between -y
|
|
# and -m subdirs. Just put -y's first.
|
|
modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
|
|
|
|
# Handle objects in subdirs
|
|
# ---------------------------------------------------------------------------
|
|
# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.a
|
|
# and add the directory to the list of dirs to descend into: $(subdir-y)
|
|
# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
|
|
# and add the directory to the list of dirs to descend into: $(subdir-m)
|
|
__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
|
|
subdir-y += $(__subdir-y)
|
|
__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
|
|
subdir-m += $(__subdir-m)
|
|
obj-y := $(patsubst %/, %/built-in.a, $(obj-y))
|
|
obj-m := $(filter-out %/, $(obj-m))
|
|
|
|
# Subdirectories we need to descend into
|
|
subdir-ym := $(sort $(subdir-y) $(subdir-m))
|
|
|
|
# if $(foo-objs), $(foo-y), or $(foo-m) exists, foo.o is a composite object
|
|
multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
|
|
multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))), $(m))))
|
|
multi-used := $(multi-used-y) $(multi-used-m)
|
|
single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
|
|
|
|
# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
|
|
# tell kbuild to descend
|
|
subdir-obj-y := $(filter %/built-in.a, $(obj-y))
|
|
|
|
# Replace multi-part objects by their individual parts,
|
|
# including built-in.a from subdirectories
|
|
real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
|
|
real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
|
|
|
|
# DTB
|
|
# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
|
|
extra-y += $(dtb-y)
|
|
extra-$(CONFIG_OF_ALL_DTBS) += $(dtb-)
|
|
|
|
# Add subdir path
|
|
|
|
extra-y := $(addprefix $(obj)/,$(extra-y))
|
|
always := $(addprefix $(obj)/,$(always))
|
|
targets := $(addprefix $(obj)/,$(targets))
|
|
modorder := $(addprefix $(obj)/,$(modorder))
|
|
obj-m := $(addprefix $(obj)/,$(obj-m))
|
|
lib-y := $(addprefix $(obj)/,$(lib-y))
|
|
subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
|
|
real-obj-y := $(addprefix $(obj)/,$(real-obj-y))
|
|
real-obj-m := $(addprefix $(obj)/,$(real-obj-m))
|
|
single-used-m := $(addprefix $(obj)/,$(single-used-m))
|
|
multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
|
|
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
|
|
|
|
# Finds the multi-part object the current object will be linked into.
|
|
# If the object belongs to two or more multi-part objects, all of them are
|
|
# concatenated with a colon separator.
|
|
modname-multi = $(subst $(space),:,$(sort $(foreach m,$(multi-used),\
|
|
$(if $(filter $*.o, $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$(m:.o=)))))
|
|
|
|
modname = $(if $(modname-multi),$(modname-multi),$(basetarget))
|
|
|
|
# These flags are needed for modversions and compiling, so we define them here
|
|
# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
|
|
# end up in (or would, if it gets compiled in)
|
|
name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
|
|
basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
|
|
modname_flags = -DKBUILD_MODNAME=$(call name-fix,$(modname))
|
|
|
|
orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \
|
|
$(ccflags-y) $(CFLAGS_$(basetarget).o)
|
|
_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
|
|
orig_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) \
|
|
$(asflags-y) $(AFLAGS_$(basetarget).o)
|
|
_a_flags = $(filter-out $(AFLAGS_REMOVE_$(basetarget).o), $(orig_a_flags))
|
|
_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
|
|
|
|
#
|
|
# Enable gcov profiling flags for a file, directory or for all files depending
|
|
# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
|
|
# (in this order)
|
|
#
|
|
ifeq ($(CONFIG_GCOV_KERNEL),y)
|
|
_c_flags += $(if $(patsubst n%,, \
|
|
$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
|
|
$(CFLAGS_GCOV))
|
|
endif
|
|
|
|
#
|
|
# Enable address sanitizer flags for kernel except some files or directories
|
|
# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
|
|
#
|
|
ifeq ($(CONFIG_KASAN),y)
|
|
_c_flags += $(if $(patsubst n%,, \
|
|
$(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
|
|
$(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE))
|
|
endif
|
|
|
|
ifeq ($(CONFIG_UBSAN),y)
|
|
_c_flags += $(if $(patsubst n%,, \
|
|
$(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \
|
|
$(CFLAGS_UBSAN))
|
|
endif
|
|
|
|
ifeq ($(CONFIG_KCOV),y)
|
|
_c_flags += $(if $(patsubst n%,, \
|
|
$(KCOV_INSTRUMENT_$(basetarget).o)$(KCOV_INSTRUMENT)$(CONFIG_KCOV_INSTRUMENT_ALL)), \
|
|
$(CFLAGS_KCOV))
|
|
endif
|
|
|
|
# If building the kernel in a separate objtree expand all occurrences
|
|
# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
|
|
|
|
ifeq ($(KBUILD_SRC),)
|
|
__c_flags = $(_c_flags)
|
|
__a_flags = $(_a_flags)
|
|
__cpp_flags = $(_cpp_flags)
|
|
else
|
|
|
|
# -I$(obj) locates generated .h files
|
|
# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
|
|
# and locates generated .h files
|
|
# FIXME: Replace both with specific CFLAGS* statements in the makefiles
|
|
__c_flags = $(if $(obj),$(call addtree,-I$(src)) -I$(obj)) \
|
|
$(call flags,_c_flags)
|
|
__a_flags = $(call flags,_a_flags)
|
|
__cpp_flags = $(call flags,_cpp_flags)
|
|
endif
|
|
|
|
c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
|
|
-include $(srctree)/include/linux/compiler_types.h \
|
|
$(__c_flags) $(modkern_cflags) \
|
|
$(basename_flags) $(modname_flags)
|
|
|
|
a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
|
|
$(__a_flags) $(modkern_aflags)
|
|
|
|
cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
|
|
$(__cpp_flags)
|
|
|
|
ld_flags = $(LDFLAGS) $(ldflags-y)
|
|
|
|
DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes
|
|
|
|
dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
|
|
$(addprefix -I,$(DTC_INCLUDE)) \
|
|
-undef -D__DTS__
|
|
|
|
# Useful for describing the dependency of composite objects
|
|
# Usage:
|
|
# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
|
|
define multi_depend
|
|
$(foreach m, $(notdir $1), \
|
|
$(eval $(obj)/$m: \
|
|
$(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
|
|
endef
|
|
|
|
# LEX
|
|
# ---------------------------------------------------------------------------
|
|
quiet_cmd_flex = LEX $@
|
|
cmd_flex = $(LEX) -o$@ -L $<
|
|
|
|
$(obj)/%.lex.c: $(src)/%.l FORCE
|
|
$(call if_changed,flex)
|
|
|
|
# YACC
|
|
# ---------------------------------------------------------------------------
|
|
quiet_cmd_bison = YACC $@
|
|
cmd_bison = $(YACC) -o$@ -t -l $<
|
|
|
|
$(obj)/%.tab.c: $(src)/%.y FORCE
|
|
$(call if_changed,bison)
|
|
|
|
quiet_cmd_bison_h = YACC $@
|
|
cmd_bison_h = bison -o/dev/null --defines=$@ -t -l $<
|
|
|
|
$(obj)/%.tab.h: $(src)/%.y FORCE
|
|
$(call if_changed,bison_h)
|
|
|
|
# Shipped files
|
|
# ===========================================================================
|
|
|
|
quiet_cmd_shipped = SHIPPED $@
|
|
cmd_shipped = cat $< > $@
|
|
|
|
$(obj)/%: $(src)/%_shipped
|
|
$(call cmd,shipped)
|
|
|
|
# Commands useful for building a boot image
|
|
# ===========================================================================
|
|
#
|
|
# Use as following:
|
|
#
|
|
# target: source(s) FORCE
|
|
# $(if_changed,ld/objcopy/gzip)
|
|
#
|
|
# and add target to extra-y so that we know we have to
|
|
# read in the saved command line
|
|
|
|
# Linking
|
|
# ---------------------------------------------------------------------------
|
|
|
|
quiet_cmd_ld = LD $@
|
|
cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
|
|
$(filter-out FORCE,$^) -o $@
|
|
|
|
# Objcopy
|
|
# ---------------------------------------------------------------------------
|
|
|
|
quiet_cmd_objcopy = OBJCOPY $@
|
|
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
|
|
|
|
# Gzip
|
|
# ---------------------------------------------------------------------------
|
|
|
|
quiet_cmd_gzip = GZIP $@
|
|
cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
|
|
(rm -f $@ ; false)
|
|
|
|
# DTC
|
|
# ---------------------------------------------------------------------------
|
|
DTC ?= $(objtree)/scripts/dtc/dtc
|
|
|
|
# Disable noisy checks by default
|
|
ifeq ($(findstring 1,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
|
|
DTC_FLAGS += -Wno-unit_address_vs_reg \
|
|
-Wno-unit_address_format \
|
|
-Wno-avoid_unnecessary_addr_size \
|
|
-Wno-alias_paths \
|
|
-Wno-pci_device_reg
|
|
endif
|
|
|
|
ifneq ($(findstring 2,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
|
|
DTC_FLAGS += -Wnode_name_chars_strict \
|
|
-Wproperty_name_chars_strict
|
|
endif
|
|
|
|
DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
|
|
|
|
# Generate an assembly file to wrap the output of the device tree compiler
|
|
quiet_cmd_dt_S_dtb= DTB $@
|
|
cmd_dt_S_dtb= \
|
|
( \
|
|
echo '\#include <asm-generic/vmlinux.lds.h>'; \
|
|
echo '.section .dtb.init.rodata,"a"'; \
|
|
echo '.balign STRUCT_ALIGNMENT'; \
|
|
echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
|
|
echo '__dtb_$(subst -,_,$(*F))_begin:'; \
|
|
echo '.incbin "$<" '; \
|
|
echo '__dtb_$(subst -,_,$(*F))_end:'; \
|
|
echo '.global __dtb_$(subst -,_,$(*F))_end'; \
|
|
echo '.balign STRUCT_ALIGNMENT'; \
|
|
) > $@
|
|
|
|
$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
|
|
$(call if_changed,dt_S_dtb)
|
|
|
|
quiet_cmd_dtc = DTC $@
|
|
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
|
|
$(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
|
|
$(DTC) -O dtb -o $@ -b 0 \
|
|
$(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
|
|
-d $(depfile).dtc.tmp $(dtc-tmp) ; \
|
|
cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
|
|
|
|
$(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
|
|
$(call if_changed_dep,dtc)
|
|
|
|
dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
|
|
|
|
# Bzip2
|
|
# ---------------------------------------------------------------------------
|
|
|
|
# Bzip2 and LZMA do not include size in file... so we have to fake that;
|
|
# append the size as a 32-bit littleendian number as gzip does.
|
|
size_append = printf $(shell \
|
|
dec_size=0; \
|
|
for F in $1; do \
|
|
fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
|
|
dec_size=$$(expr $$dec_size + $$fsize); \
|
|
done; \
|
|
printf "%08x\n" $$dec_size | \
|
|
sed 's/\(..\)/\1 /g' | { \
|
|
read ch0 ch1 ch2 ch3; \
|
|
for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
|
|
printf '%s%03o' '\\' $$((0x$$ch)); \
|
|
done; \
|
|
} \
|
|
)
|
|
|
|
quiet_cmd_bzip2 = BZIP2 $@
|
|
cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
|
|
bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
|
|
(rm -f $@ ; false)
|
|
|
|
# Lzma
|
|
# ---------------------------------------------------------------------------
|
|
|
|
quiet_cmd_lzma = LZMA $@
|
|
cmd_lzma = (cat $(filter-out FORCE,$^) | \
|
|
lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
|
|
(rm -f $@ ; false)
|
|
|
|
quiet_cmd_lzo = LZO $@
|
|
cmd_lzo = (cat $(filter-out FORCE,$^) | \
|
|
lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
|
|
(rm -f $@ ; false)
|
|
|
|
quiet_cmd_lz4 = LZ4 $@
|
|
cmd_lz4 = (cat $(filter-out FORCE,$^) | \
|
|
lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
|
|
(rm -f $@ ; false)
|
|
|
|
# U-Boot mkimage
|
|
# ---------------------------------------------------------------------------
|
|
|
|
MKIMAGE := $(srctree)/scripts/mkuboot.sh
|
|
|
|
# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
|
|
# the number of overrides in arch makefiles
|
|
UIMAGE_ARCH ?= $(SRCARCH)
|
|
UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
|
|
UIMAGE_OPTS-y ?=
|
|
UIMAGE_TYPE ?= kernel
|
|
UIMAGE_LOADADDR ?= arch_must_set_this
|
|
UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
|
|
UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
|
|
UIMAGE_IN ?= $<
|
|
UIMAGE_OUT ?= $@
|
|
|
|
quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
|
|
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
|
|
-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
|
|
-T $(UIMAGE_TYPE) \
|
|
-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
|
|
-n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
|
|
|
|
# XZ
|
|
# ---------------------------------------------------------------------------
|
|
# Use xzkern to compress the kernel image and xzmisc to compress other things.
|
|
#
|
|
# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
|
|
# of the kernel decompressor. A BCJ filter is used if it is available for
|
|
# the target architecture. xzkern also appends uncompressed size of the data
|
|
# using size_append. The .xz format has the size information available at
|
|
# the end of the file too, but it's in more complex format and it's good to
|
|
# avoid changing the part of the boot code that reads the uncompressed size.
|
|
# Note that the bytes added by size_append will make the xz tool think that
|
|
# the file is corrupt. This is expected.
|
|
#
|
|
# xzmisc doesn't use size_append, so it can be used to create normal .xz
|
|
# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
|
|
# big dictionary would increase the memory usage too much in the multi-call
|
|
# decompression mode. A BCJ filter isn't used either.
|
|
quiet_cmd_xzkern = XZKERN $@
|
|
cmd_xzkern = (cat $(filter-out FORCE,$^) | \
|
|
sh $(srctree)/scripts/xz_wrap.sh && \
|
|
$(call size_append, $(filter-out FORCE,$^))) > $@ || \
|
|
(rm -f $@ ; false)
|
|
|
|
quiet_cmd_xzmisc = XZMISC $@
|
|
cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
|
|
xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
|
|
(rm -f $@ ; false)
|
|
|
|
# ASM offsets
|
|
# ---------------------------------------------------------------------------
|
|
|
|
# Default sed regexp - multiline due to syntax constraints
|
|
#
|
|
# Use [:space:] because LLVM's integrated assembler inserts <tab> around
|
|
# the .ascii directive whereas GCC keeps the <space> as-is.
|
|
define sed-offsets
|
|
's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \
|
|
/^->/{s:->#\(.*\):/* \1 */:; \
|
|
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
|
|
s:->::; p;}'
|
|
endef
|
|
|
|
# Use filechk to avoid rebuilds when a header changes, but the resulting file
|
|
# does not
|
|
define filechk_offsets
|
|
(set -e; \
|
|
echo "#ifndef $2"; \
|
|
echo "#define $2"; \
|
|
echo "/*"; \
|
|
echo " * DO NOT MODIFY."; \
|
|
echo " *"; \
|
|
echo " * This file was generated by Kbuild"; \
|
|
echo " */"; \
|
|
echo ""; \
|
|
sed -ne $(sed-offsets); \
|
|
echo ""; \
|
|
echo "#endif" )
|
|
endef
|