kernel_optimize_test/tools/perf/arch
Linus Torvalds f0c98ebc57 libnvdimm for 4.8
1/ Replace pcommit with ADR / directed-flushing:
    The pcommit instruction, which has not shipped on any product, is
    deprecated. Instead, the requirement is that platforms implement either
    ADR, or provide one or more flush addresses per nvdimm. ADR
    (Asynchronous DRAM Refresh) flushes data in posted write buffers to the
    memory controller on a power-fail event. Flush addresses are defined in
    ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure:
    "Flush Hint Address Structure". A flush hint is an mmio address that
    when written and fenced assures that all previous posted writes
    targeting a given dimm have been flushed to media.
 
 2/ On-demand ARS (address range scrub):
    Linux uses the results of the ACPI ARS commands to track bad blocks
    in pmem devices.  When latent errors are detected we re-scrub the media
    to refresh the bad block list, userspace can also request a re-scrub at
    any time.
 
 3/ Support for the Microsoft DSM (device specific method) command format.
 
 4/ Support for EDK2/OVMF virtual disk device memory ranges.
 
 5/ Various fixes and cleanups across the subsystem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXmXBsAAoJEB7SkWpmfYgCEwwP/1IOt9ocP+iHLMDH9KE7VaTZ
 NmUDR+Zy6g5cRQM7SgcuU5BXUcx+OsSrSrUTVF1cW994o9Gbz1mFotkv0ZAsPcYY
 ZVRQxo2oqHrssyOcg+PsgKWiXn68rJOCgmpEyzaJywl5qTMst7pzsT1s1f7rSh6h
 trCf4VaJJwxZR8fARGtlHUnnhPe2Orp99EZRKEWprAsIv2kPuWpPHSjRjuEgN1JG
 KW8AYwWqFTtiLRUk86I4KBB0wcDrfctsjgN9Ogd6+aHyQBRnVSr2U+vDCFkC8KLu
 qiDCpYp+yyxBjclnljz7tRRT3GtzfCUWd4v2KVWqgg2IaobUc0Lbukp/rmikUXQP
 WLikT2OCQ994eFK5OX3Q3cIU/4j459TQnof8q14yVSpjAKrNUXVSR5puN7Hxa+V7
 41wKrAsnsyY1oq+Yd/rMR8VfH7PHx3bFkrmRCGZCufLX1UQm4aYj+sWagDKiV3yA
 DiudghbOnhfurfGsnXUVw7y7GKs+gNWNBmB6ndAD6ZEHmKoGUhAEbJDLCc3DnANl
 b/2mv1MIdIcC1DlCmnbbcn6fv6bICe/r8poK3VrCK3UgOq/EOvKIWl7giP+k1JuC
 6DdVYhlNYIVFXUNSLFAwz8OkLu8byx7WDm36iEqrKHtPw+8qa/2bWVgOU6OBgpjV
 cN3edFVIdxvZeMgM5Ubq
 =xCBG
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:

 - Replace pcommit with ADR / directed-flushing.

   The pcommit instruction, which has not shipped on any product, is
   deprecated.  Instead, the requirement is that platforms implement
   either ADR, or provide one or more flush addresses per nvdimm.

   ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
   to the memory controller on a power-fail event.

   Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
   Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
   A flush hint is an mmio address that when written and fenced assures
   that all previous posted writes targeting a given dimm have been
   flushed to media.

 - On-demand ARS (address range scrub).

   Linux uses the results of the ACPI ARS commands to track bad blocks
   in pmem devices.  When latent errors are detected we re-scrub the
   media to refresh the bad block list, userspace can also request a
   re-scrub at any time.

 - Support for the Microsoft DSM (device specific method) command
   format.

 - Support for EDK2/OVMF virtual disk device memory ranges.

 - Various fixes and cleanups across the subsystem.

* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
  libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
  nfit: do an ARS scrub on hitting a latent media error
  nfit: move to nfit/ sub-directory
  nfit, libnvdimm: allow an ARS scrub to be triggered on demand
  libnvdimm: register nvdimm_bus devices with an nd_bus driver
  pmem: clarify a debug print in pmem_clear_poison
  x86/insn: remove pcommit
  Revert "KVM: x86: add pcommit support"
  nfit, tools/testing/nvdimm/: unify shutdown paths
  libnvdimm: move ->module to struct nvdimm_bus_descriptor
  nfit: cleanup acpi_nfit_init calling convention
  nfit: fix _FIT evaluation memory leak + use after free
  tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
  tools/testing/nvdimm: add virtual ramdisk range
  acpi, nfit: treat virtual ramdisk SPA as pmem region
  pmem: kill __pmem address space
  pmem: kill wmb_pmem()
  libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
  fs/dax: remove wmb_pmem()
  libnvdimm, pmem: flush posted-write queues on shutdown
  ...
2016-07-28 17:38:16 -07:00
..
alpha perf tools: Add empty Build files for architectures lacking them 2015-08-06 16:24:15 -03:00
arm perf unwind: Separate local/remote libunwind config 2016-06-07 12:08:52 -03:00
arm64 perf callchain: Support aarch64 cross-platform 2016-06-07 15:13:35 -03:00
mips perf tools: Add empty Build files for architectures lacking them 2015-08-06 16:24:15 -03:00
parisc perf tools: Add empty Build files for architectures lacking them 2015-08-06 16:24:15 -03:00
powerpc powerpc updates for 4.7 2016-05-20 10:12:41 -07:00
s390 perf kvm/{x86,s390}: Remove const from kvm_events_tp 2016-01-29 17:49:53 -03:00
sh perf dwarf: Fix potential array out of bounds access 2015-09-01 11:33:48 -03:00
sparc perf dwarf: Fix potential array out of bounds access 2015-09-01 11:33:48 -03:00
x86 libnvdimm for 4.8 2016-07-28 17:38:16 -07:00
xtensa perf tools xtensa: Add DWARF register names 2015-08-06 16:45:05 -03:00
Build perf build: Add arch x86 objects building 2015-02-12 13:12:01 -03:00
common.c perf tools: Remove needless includes from cache.h 2016-07-12 15:19:58 -03:00
common.h perf tools: Export normalize_arch() function 2016-06-07 12:08:53 -03:00