kernel_optimize_test/include/linux/ultrasound.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

104 lines
4.4 KiB
C

#ifndef _ULTRASOUND_H_
#define _ULTRASOUND_H_
/*
* ultrasound.h - Macros for programming the Gravis Ultrasound
* These macros are extremely device dependent
* and not portable.
*/
/*
* Copyright (C) by Hannu Savolainen 1993-1997
*
* OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
* Version 2 (June 1991). See the "COPYING" file distributed with this software
* for more info.
*/
/*
* Private events for Gravis Ultrasound (GUS)
*
* Format:
* byte 0 - SEQ_PRIVATE (0xfe)
* byte 1 - Synthesizer device number (0-N)
* byte 2 - Command (see below)
* byte 3 - Voice number (0-31)
* bytes 4 and 5 - parameter P1 (unsigned short)
* bytes 6 and 7 - parameter P2 (unsigned short)
*
* Commands:
* Each command affects one voice defined in byte 3.
* Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
* _GUS_NUMVOICES - Sets max. number of concurrent voices (P1=14-31, default 16)
* _GUS_VOICESAMPLE- ************ OBSOLETE *************
* _GUS_VOICEON - Starts voice (P1=voice mode)
* _GUS_VOICEOFF - Stops voice (no parameters)
* _GUS_VOICEFADE - Stops the voice smoothly.
* _GUS_VOICEMODE - Alters the voice mode, don't start or stop voice (P1=voice mode)
* _GUS_VOICEBALA - Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7)
* _GUS_VOICEFREQ - Sets voice (sample) playback frequency (P1=Hz)
* _GUS_VOICEVOL - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
* _GUS_VOICEVOL2 - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
* (Like GUS_VOICEVOL but doesn't change the hw
* volume. It just updates volume in the voice table).
*
* _GUS_RAMPRANGE - Sets limits for volume ramping (P1=low volume, P2=high volume)
* _GUS_RAMPRATE - Sets the speed for volume ramping (P1=scale, P2=rate)
* _GUS_RAMPMODE - Sets the volume ramping mode (P1=ramping mode)
* _GUS_RAMPON - Starts volume ramping (no parameters)
* _GUS_RAMPOFF - Stops volume ramping (no parameters)
* _GUS_VOLUME_SCALE - Changes the volume calculation constants
* for all voices.
*/
#define _GUS_NUMVOICES 0x00
#define _GUS_VOICESAMPLE 0x01 /* OBSOLETE */
#define _GUS_VOICEON 0x02
#define _GUS_VOICEOFF 0x03
#define _GUS_VOICEMODE 0x04
#define _GUS_VOICEBALA 0x05
#define _GUS_VOICEFREQ 0x06
#define _GUS_VOICEVOL 0x07
#define _GUS_RAMPRANGE 0x08
#define _GUS_RAMPRATE 0x09
#define _GUS_RAMPMODE 0x0a
#define _GUS_RAMPON 0x0b
#define _GUS_RAMPOFF 0x0c
#define _GUS_VOICEFADE 0x0d
#define _GUS_VOLUME_SCALE 0x0e
#define _GUS_VOICEVOL2 0x0f
#define _GUS_VOICE_POS 0x10
/*
* GUS API macros
*/
#define _GUS_CMD(chn, voice, cmd, p1, p2) \
{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
_seqbuf[_seqbufptr+3] = voice;\
*(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
*(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
_SEQ_ADVBUF(8);}
#define GUS_NUMVOICES(chn, p1) _GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
#define GUS_VOICESAMPLE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0) /* OBSOLETE */
#define GUS_VOICEON(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
#define GUS_VOICEOFF(chn, voice) _GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
#define GUS_VOICEFADE(chn, voice) _GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
#define GUS_VOICEMODE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
#define GUS_VOICEBALA(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
#define GUS_VOICEFREQ(chn, voice, p) _GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
(p) & 0xffff, ((p) >> 16) & 0xffff)
#define GUS_VOICEVOL(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
#define GUS_VOICEVOL2(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
#define GUS_RAMPRANGE(chn, voice, low, high) _GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
#define GUS_RAMPRATE(chn, voice, p1, p2) _GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
#define GUS_RAMPMODE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
#define GUS_RAMPON(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
#define GUS_RAMPOFF(chn, voice) _GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
#define GUS_VOLUME_SCALE(chn, voice, p1, p2) _GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
#define GUS_VOICE_POS(chn, voice, p) _GUS_CMD(chn, voice, _GUS_VOICE_POS, \
(p) & 0xffff, ((p) >> 16) & 0xffff)
#endif