forked from luck/tmp_suning_uos_patched
f2b0b25a37
In case of ARCv2 CPU there're could be following configurations that affect cache handling for data exchanged with peripherals via DMA: [1] Only L1 cache exists [2] Both L1 and L2 exist, but no IO coherency unit [3] L1, L2 caches and IO coherency unit exist Current implementation takes care of [1] and [2]. Moreover support of [2] is implemented with run-time check for SLC existence which is not super optimal. This patch introduces support of [3] and rework of DMA ops usage. Instead of doing run-time check every time a particular DMA op is executed we'll have 3 different implementations of DMA ops and select appropriate one during init. As for IOC support for it we need: [a] Implement empty DMA ops because IOC takes care of cache coherency with DMAed data [b] Route dma_alloc_coherent() via dma_alloc_noncoherent() This is required to make IOC work in first place and also serves as optimization as LD/ST to coherent buffers can be srviced from caches w/o going all the way to memory Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> [vgupta: -Added some comments about IOC gains -Marked dma ops as static, -Massaged changelog a bit] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
934 lines
26 KiB
C
934 lines
26 KiB
C
/*
|
|
* ARC Cache Management
|
|
*
|
|
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
|
|
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/mmu_context.h>
|
|
#include <linux/syscalls.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/pagemap.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/cachectl.h>
|
|
#include <asm/setup.h>
|
|
|
|
static int l2_line_sz;
|
|
int ioc_exists;
|
|
|
|
void (*_cache_line_loop_ic_fn)(unsigned long paddr, unsigned long vaddr,
|
|
unsigned long sz, const int cacheop);
|
|
|
|
void (*__dma_cache_wback_inv)(unsigned long start, unsigned long sz);
|
|
void (*__dma_cache_inv)(unsigned long start, unsigned long sz);
|
|
void (*__dma_cache_wback)(unsigned long start, unsigned long sz);
|
|
|
|
char *arc_cache_mumbojumbo(int c, char *buf, int len)
|
|
{
|
|
int n = 0;
|
|
struct cpuinfo_arc_cache *p;
|
|
|
|
#define PR_CACHE(p, cfg, str) \
|
|
if (!(p)->ver) \
|
|
n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \
|
|
else \
|
|
n += scnprintf(buf + n, len - n, \
|
|
str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n", \
|
|
(p)->sz_k, (p)->assoc, (p)->line_len, \
|
|
(p)->vipt ? "VIPT" : "PIPT", \
|
|
(p)->alias ? " aliasing" : "", \
|
|
IS_ENABLED(cfg) ? "" : " (not used)");
|
|
|
|
PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
|
|
PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
|
|
|
|
p = &cpuinfo_arc700[c].slc;
|
|
if (p->ver)
|
|
n += scnprintf(buf + n, len - n,
|
|
"SLC\t\t: %uK, %uB Line\n", p->sz_k, p->line_len);
|
|
|
|
if (ioc_exists)
|
|
n += scnprintf(buf + n, len - n, "IOC\t\t: exists\n");
|
|
|
|
return buf;
|
|
}
|
|
|
|
/*
|
|
* Read the Cache Build Confuration Registers, Decode them and save into
|
|
* the cpuinfo structure for later use.
|
|
* No Validation done here, simply read/convert the BCRs
|
|
*/
|
|
void read_decode_cache_bcr(void)
|
|
{
|
|
struct cpuinfo_arc_cache *p_ic, *p_dc, *p_slc;
|
|
unsigned int cpu = smp_processor_id();
|
|
struct bcr_cache {
|
|
#ifdef CONFIG_CPU_BIG_ENDIAN
|
|
unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
|
|
#else
|
|
unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
|
|
#endif
|
|
} ibcr, dbcr;
|
|
|
|
struct bcr_generic sbcr;
|
|
|
|
struct bcr_slc_cfg {
|
|
#ifdef CONFIG_CPU_BIG_ENDIAN
|
|
unsigned int pad:24, way:2, lsz:2, sz:4;
|
|
#else
|
|
unsigned int sz:4, lsz:2, way:2, pad:24;
|
|
#endif
|
|
} slc_cfg;
|
|
|
|
struct bcr_clust_cfg {
|
|
#ifdef CONFIG_CPU_BIG_ENDIAN
|
|
unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
|
|
#else
|
|
unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
|
|
#endif
|
|
} cbcr;
|
|
|
|
p_ic = &cpuinfo_arc700[cpu].icache;
|
|
READ_BCR(ARC_REG_IC_BCR, ibcr);
|
|
|
|
if (!ibcr.ver)
|
|
goto dc_chk;
|
|
|
|
if (ibcr.ver <= 3) {
|
|
BUG_ON(ibcr.config != 3);
|
|
p_ic->assoc = 2; /* Fixed to 2w set assoc */
|
|
} else if (ibcr.ver >= 4) {
|
|
p_ic->assoc = 1 << ibcr.config; /* 1,2,4,8 */
|
|
}
|
|
|
|
p_ic->line_len = 8 << ibcr.line_len;
|
|
p_ic->sz_k = 1 << (ibcr.sz - 1);
|
|
p_ic->ver = ibcr.ver;
|
|
p_ic->vipt = 1;
|
|
p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1;
|
|
|
|
dc_chk:
|
|
p_dc = &cpuinfo_arc700[cpu].dcache;
|
|
READ_BCR(ARC_REG_DC_BCR, dbcr);
|
|
|
|
if (!dbcr.ver)
|
|
goto slc_chk;
|
|
|
|
if (dbcr.ver <= 3) {
|
|
BUG_ON(dbcr.config != 2);
|
|
p_dc->assoc = 4; /* Fixed to 4w set assoc */
|
|
p_dc->vipt = 1;
|
|
p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1;
|
|
} else if (dbcr.ver >= 4) {
|
|
p_dc->assoc = 1 << dbcr.config; /* 1,2,4,8 */
|
|
p_dc->vipt = 0;
|
|
p_dc->alias = 0; /* PIPT so can't VIPT alias */
|
|
}
|
|
|
|
p_dc->line_len = 16 << dbcr.line_len;
|
|
p_dc->sz_k = 1 << (dbcr.sz - 1);
|
|
p_dc->ver = dbcr.ver;
|
|
|
|
slc_chk:
|
|
if (!is_isa_arcv2())
|
|
return;
|
|
|
|
p_slc = &cpuinfo_arc700[cpu].slc;
|
|
READ_BCR(ARC_REG_SLC_BCR, sbcr);
|
|
if (sbcr.ver) {
|
|
READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
|
|
p_slc->ver = sbcr.ver;
|
|
p_slc->sz_k = 128 << slc_cfg.sz;
|
|
l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
|
|
}
|
|
|
|
READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
|
|
if (cbcr.c)
|
|
ioc_exists = 1;
|
|
}
|
|
|
|
/*
|
|
* Line Operation on {I,D}-Cache
|
|
*/
|
|
|
|
#define OP_INV 0x1
|
|
#define OP_FLUSH 0x2
|
|
#define OP_FLUSH_N_INV 0x3
|
|
#define OP_INV_IC 0x4
|
|
|
|
/*
|
|
* I-Cache Aliasing in ARC700 VIPT caches (MMU v1-v3)
|
|
*
|
|
* ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
|
|
* The orig Cache Management Module "CDU" only required paddr to invalidate a
|
|
* certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
|
|
* Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
|
|
* the exact same line.
|
|
*
|
|
* However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
|
|
* paddr alone could not be used to correctly index the cache.
|
|
*
|
|
* ------------------
|
|
* MMU v1/v2 (Fixed Page Size 8k)
|
|
* ------------------
|
|
* The solution was to provide CDU with these additonal vaddr bits. These
|
|
* would be bits [x:13], x would depend on cache-geometry, 13 comes from
|
|
* standard page size of 8k.
|
|
* H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
|
|
* of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
|
|
* orig 5 bits of paddr were anyways ignored by CDU line ops, as they
|
|
* represent the offset within cache-line. The adv of using this "clumsy"
|
|
* interface for additional info was no new reg was needed in CDU programming
|
|
* model.
|
|
*
|
|
* 17:13 represented the max num of bits passable, actual bits needed were
|
|
* fewer, based on the num-of-aliases possible.
|
|
* -for 2 alias possibility, only bit 13 needed (32K cache)
|
|
* -for 4 alias possibility, bits 14:13 needed (64K cache)
|
|
*
|
|
* ------------------
|
|
* MMU v3
|
|
* ------------------
|
|
* This ver of MMU supports variable page sizes (1k-16k): although Linux will
|
|
* only support 8k (default), 16k and 4k.
|
|
* However from hardware perspective, smaller page sizes aggrevate aliasing
|
|
* meaning more vaddr bits needed to disambiguate the cache-line-op ;
|
|
* the existing scheme of piggybacking won't work for certain configurations.
|
|
* Two new registers IC_PTAG and DC_PTAG inttoduced.
|
|
* "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
|
|
*/
|
|
|
|
static inline
|
|
void __cache_line_loop_v2(unsigned long paddr, unsigned long vaddr,
|
|
unsigned long sz, const int op)
|
|
{
|
|
unsigned int aux_cmd;
|
|
int num_lines;
|
|
const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
|
|
|
|
if (op == OP_INV_IC) {
|
|
aux_cmd = ARC_REG_IC_IVIL;
|
|
} else {
|
|
/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
|
|
aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
|
|
}
|
|
|
|
/* Ensure we properly floor/ceil the non-line aligned/sized requests
|
|
* and have @paddr - aligned to cache line and integral @num_lines.
|
|
* This however can be avoided for page sized since:
|
|
* -@paddr will be cache-line aligned already (being page aligned)
|
|
* -@sz will be integral multiple of line size (being page sized).
|
|
*/
|
|
if (!full_page) {
|
|
sz += paddr & ~CACHE_LINE_MASK;
|
|
paddr &= CACHE_LINE_MASK;
|
|
vaddr &= CACHE_LINE_MASK;
|
|
}
|
|
|
|
num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
|
|
|
|
/* MMUv2 and before: paddr contains stuffed vaddrs bits */
|
|
paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
|
|
|
|
while (num_lines-- > 0) {
|
|
write_aux_reg(aux_cmd, paddr);
|
|
paddr += L1_CACHE_BYTES;
|
|
}
|
|
}
|
|
|
|
static inline
|
|
void __cache_line_loop_v3(unsigned long paddr, unsigned long vaddr,
|
|
unsigned long sz, const int op)
|
|
{
|
|
unsigned int aux_cmd, aux_tag;
|
|
int num_lines;
|
|
const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
|
|
|
|
if (op == OP_INV_IC) {
|
|
aux_cmd = ARC_REG_IC_IVIL;
|
|
aux_tag = ARC_REG_IC_PTAG;
|
|
} else {
|
|
aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
|
|
aux_tag = ARC_REG_DC_PTAG;
|
|
}
|
|
|
|
/* Ensure we properly floor/ceil the non-line aligned/sized requests
|
|
* and have @paddr - aligned to cache line and integral @num_lines.
|
|
* This however can be avoided for page sized since:
|
|
* -@paddr will be cache-line aligned already (being page aligned)
|
|
* -@sz will be integral multiple of line size (being page sized).
|
|
*/
|
|
if (!full_page) {
|
|
sz += paddr & ~CACHE_LINE_MASK;
|
|
paddr &= CACHE_LINE_MASK;
|
|
vaddr &= CACHE_LINE_MASK;
|
|
}
|
|
num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
|
|
|
|
/*
|
|
* MMUv3, cache ops require paddr in PTAG reg
|
|
* if V-P const for loop, PTAG can be written once outside loop
|
|
*/
|
|
if (full_page)
|
|
write_aux_reg(aux_tag, paddr);
|
|
|
|
while (num_lines-- > 0) {
|
|
if (!full_page) {
|
|
write_aux_reg(aux_tag, paddr);
|
|
paddr += L1_CACHE_BYTES;
|
|
}
|
|
|
|
write_aux_reg(aux_cmd, vaddr);
|
|
vaddr += L1_CACHE_BYTES;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* In HS38x (MMU v4), although icache is VIPT, only paddr is needed for cache
|
|
* maintenance ops (in IVIL reg), as long as icache doesn't alias.
|
|
*
|
|
* For Aliasing icache, vaddr is also needed (in IVIL), while paddr is
|
|
* specified in PTAG (similar to MMU v3)
|
|
*/
|
|
static inline
|
|
void __cache_line_loop_v4(unsigned long paddr, unsigned long vaddr,
|
|
unsigned long sz, const int cacheop)
|
|
{
|
|
unsigned int aux_cmd;
|
|
int num_lines;
|
|
const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE;
|
|
|
|
if (cacheop == OP_INV_IC) {
|
|
aux_cmd = ARC_REG_IC_IVIL;
|
|
} else {
|
|
/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
|
|
aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
|
|
}
|
|
|
|
/* Ensure we properly floor/ceil the non-line aligned/sized requests
|
|
* and have @paddr - aligned to cache line and integral @num_lines.
|
|
* This however can be avoided for page sized since:
|
|
* -@paddr will be cache-line aligned already (being page aligned)
|
|
* -@sz will be integral multiple of line size (being page sized).
|
|
*/
|
|
if (!full_page_op) {
|
|
sz += paddr & ~CACHE_LINE_MASK;
|
|
paddr &= CACHE_LINE_MASK;
|
|
}
|
|
|
|
num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
|
|
|
|
while (num_lines-- > 0) {
|
|
write_aux_reg(aux_cmd, paddr);
|
|
paddr += L1_CACHE_BYTES;
|
|
}
|
|
}
|
|
|
|
#if (CONFIG_ARC_MMU_VER < 3)
|
|
#define __cache_line_loop __cache_line_loop_v2
|
|
#elif (CONFIG_ARC_MMU_VER == 3)
|
|
#define __cache_line_loop __cache_line_loop_v3
|
|
#elif (CONFIG_ARC_MMU_VER > 3)
|
|
#define __cache_line_loop __cache_line_loop_v4
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARC_HAS_DCACHE
|
|
|
|
/***************************************************************
|
|
* Machine specific helpers for Entire D-Cache or Per Line ops
|
|
*/
|
|
|
|
static inline void __before_dc_op(const int op)
|
|
{
|
|
if (op == OP_FLUSH_N_INV) {
|
|
/* Dcache provides 2 cmd: FLUSH or INV
|
|
* INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
|
|
* flush-n-inv is achieved by INV cmd but with IM=1
|
|
* So toggle INV sub-mode depending on op request and default
|
|
*/
|
|
const unsigned int ctl = ARC_REG_DC_CTRL;
|
|
write_aux_reg(ctl, read_aux_reg(ctl) | DC_CTRL_INV_MODE_FLUSH);
|
|
}
|
|
}
|
|
|
|
static inline void __after_dc_op(const int op)
|
|
{
|
|
if (op & OP_FLUSH) {
|
|
const unsigned int ctl = ARC_REG_DC_CTRL;
|
|
unsigned int reg;
|
|
|
|
/* flush / flush-n-inv both wait */
|
|
while ((reg = read_aux_reg(ctl)) & DC_CTRL_FLUSH_STATUS)
|
|
;
|
|
|
|
/* Switch back to default Invalidate mode */
|
|
if (op == OP_FLUSH_N_INV)
|
|
write_aux_reg(ctl, reg & ~DC_CTRL_INV_MODE_FLUSH);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Operation on Entire D-Cache
|
|
* @op = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV}
|
|
* Note that constant propagation ensures all the checks are gone
|
|
* in generated code
|
|
*/
|
|
static inline void __dc_entire_op(const int op)
|
|
{
|
|
int aux;
|
|
|
|
__before_dc_op(op);
|
|
|
|
if (op & OP_INV) /* Inv or flush-n-inv use same cmd reg */
|
|
aux = ARC_REG_DC_IVDC;
|
|
else
|
|
aux = ARC_REG_DC_FLSH;
|
|
|
|
write_aux_reg(aux, 0x1);
|
|
|
|
__after_dc_op(op);
|
|
}
|
|
|
|
/* For kernel mappings cache operation: index is same as paddr */
|
|
#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op)
|
|
|
|
/*
|
|
* D-Cache Line ops: Per Line INV (discard or wback+discard) or FLUSH (wback)
|
|
*/
|
|
static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
|
|
unsigned long sz, const int op)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
__before_dc_op(op);
|
|
|
|
__cache_line_loop(paddr, vaddr, sz, op);
|
|
|
|
__after_dc_op(op);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
#else
|
|
|
|
#define __dc_entire_op(op)
|
|
#define __dc_line_op(paddr, vaddr, sz, op)
|
|
#define __dc_line_op_k(paddr, sz, op)
|
|
|
|
#endif /* CONFIG_ARC_HAS_DCACHE */
|
|
|
|
#ifdef CONFIG_ARC_HAS_ICACHE
|
|
|
|
static inline void __ic_entire_inv(void)
|
|
{
|
|
write_aux_reg(ARC_REG_IC_IVIC, 1);
|
|
read_aux_reg(ARC_REG_IC_CTRL); /* blocks */
|
|
}
|
|
|
|
static inline void
|
|
__ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr,
|
|
unsigned long sz)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
(*_cache_line_loop_ic_fn)(paddr, vaddr, sz, OP_INV_IC);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
#ifndef CONFIG_SMP
|
|
|
|
#define __ic_line_inv_vaddr(p, v, s) __ic_line_inv_vaddr_local(p, v, s)
|
|
|
|
#else
|
|
|
|
struct ic_inv_args {
|
|
unsigned long paddr, vaddr;
|
|
int sz;
|
|
};
|
|
|
|
static void __ic_line_inv_vaddr_helper(void *info)
|
|
{
|
|
struct ic_inv_args *ic_inv = info;
|
|
|
|
__ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
|
|
}
|
|
|
|
static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
|
|
unsigned long sz)
|
|
{
|
|
struct ic_inv_args ic_inv = {
|
|
.paddr = paddr,
|
|
.vaddr = vaddr,
|
|
.sz = sz
|
|
};
|
|
|
|
on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1);
|
|
}
|
|
|
|
#endif /* CONFIG_SMP */
|
|
|
|
#else /* !CONFIG_ARC_HAS_ICACHE */
|
|
|
|
#define __ic_entire_inv()
|
|
#define __ic_line_inv_vaddr(pstart, vstart, sz)
|
|
|
|
#endif /* CONFIG_ARC_HAS_ICACHE */
|
|
|
|
noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
|
|
{
|
|
#ifdef CONFIG_ISA_ARCV2
|
|
/*
|
|
* SLC is shared between all cores and concurrent aux operations from
|
|
* multiple cores need to be serialized using a spinlock
|
|
* A concurrent operation can be silently ignored and/or the old/new
|
|
* operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
|
|
* below)
|
|
*/
|
|
static DEFINE_SPINLOCK(lock);
|
|
unsigned long flags;
|
|
unsigned int ctrl;
|
|
|
|
spin_lock_irqsave(&lock, flags);
|
|
|
|
/*
|
|
* The Region Flush operation is specified by CTRL.RGN_OP[11..9]
|
|
* - b'000 (default) is Flush,
|
|
* - b'001 is Invalidate if CTRL.IM == 0
|
|
* - b'001 is Flush-n-Invalidate if CTRL.IM == 1
|
|
*/
|
|
ctrl = read_aux_reg(ARC_REG_SLC_CTRL);
|
|
|
|
/* Don't rely on default value of IM bit */
|
|
if (!(op & OP_FLUSH)) /* i.e. OP_INV */
|
|
ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */
|
|
else
|
|
ctrl |= SLC_CTRL_IM;
|
|
|
|
if (op & OP_INV)
|
|
ctrl |= SLC_CTRL_RGN_OP_INV; /* Inv or flush-n-inv */
|
|
else
|
|
ctrl &= ~SLC_CTRL_RGN_OP_INV;
|
|
|
|
write_aux_reg(ARC_REG_SLC_CTRL, ctrl);
|
|
|
|
/*
|
|
* Lower bits are ignored, no need to clip
|
|
* END needs to be setup before START (latter triggers the operation)
|
|
* END can't be same as START, so add (l2_line_sz - 1) to sz
|
|
*/
|
|
write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
|
|
write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
|
|
|
|
while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
|
|
|
|
spin_unlock_irqrestore(&lock, flags);
|
|
#endif
|
|
}
|
|
|
|
/***********************************************************
|
|
* Exported APIs
|
|
*/
|
|
|
|
/*
|
|
* Handle cache congruency of kernel and userspace mappings of page when kernel
|
|
* writes-to/reads-from
|
|
*
|
|
* The idea is to defer flushing of kernel mapping after a WRITE, possible if:
|
|
* -dcache is NOT aliasing, hence any U/K-mappings of page are congruent
|
|
* -U-mapping doesn't exist yet for page (finalised in update_mmu_cache)
|
|
* -In SMP, if hardware caches are coherent
|
|
*
|
|
* There's a corollary case, where kernel READs from a userspace mapped page.
|
|
* If the U-mapping is not congruent to to K-mapping, former needs flushing.
|
|
*/
|
|
void flush_dcache_page(struct page *page)
|
|
{
|
|
struct address_space *mapping;
|
|
|
|
if (!cache_is_vipt_aliasing()) {
|
|
clear_bit(PG_dc_clean, &page->flags);
|
|
return;
|
|
}
|
|
|
|
/* don't handle anon pages here */
|
|
mapping = page_mapping(page);
|
|
if (!mapping)
|
|
return;
|
|
|
|
/*
|
|
* pagecache page, file not yet mapped to userspace
|
|
* Make a note that K-mapping is dirty
|
|
*/
|
|
if (!mapping_mapped(mapping)) {
|
|
clear_bit(PG_dc_clean, &page->flags);
|
|
} else if (page_mapped(page)) {
|
|
|
|
/* kernel reading from page with U-mapping */
|
|
unsigned long paddr = (unsigned long)page_address(page);
|
|
unsigned long vaddr = page->index << PAGE_CACHE_SHIFT;
|
|
|
|
if (addr_not_cache_congruent(paddr, vaddr))
|
|
__flush_dcache_page(paddr, vaddr);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(flush_dcache_page);
|
|
|
|
/*
|
|
* DMA ops for systems with L1 cache only
|
|
* Make memory coherent with L1 cache by flushing/invalidating L1 lines
|
|
*/
|
|
static void __dma_cache_wback_inv_l1(unsigned long start, unsigned long sz)
|
|
{
|
|
__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
|
|
}
|
|
|
|
static void __dma_cache_inv_l1(unsigned long start, unsigned long sz)
|
|
{
|
|
__dc_line_op_k(start, sz, OP_INV);
|
|
}
|
|
|
|
static void __dma_cache_wback_l1(unsigned long start, unsigned long sz)
|
|
{
|
|
__dc_line_op_k(start, sz, OP_FLUSH);
|
|
}
|
|
|
|
/*
|
|
* DMA ops for systems with both L1 and L2 caches, but without IOC
|
|
* Both L1 and L2 lines need to be explicity flushed/invalidated
|
|
*/
|
|
static void __dma_cache_wback_inv_slc(unsigned long start, unsigned long sz)
|
|
{
|
|
__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
|
|
slc_op(start, sz, OP_FLUSH_N_INV);
|
|
}
|
|
|
|
static void __dma_cache_inv_slc(unsigned long start, unsigned long sz)
|
|
{
|
|
__dc_line_op_k(start, sz, OP_INV);
|
|
slc_op(start, sz, OP_INV);
|
|
}
|
|
|
|
static void __dma_cache_wback_slc(unsigned long start, unsigned long sz)
|
|
{
|
|
__dc_line_op_k(start, sz, OP_FLUSH);
|
|
slc_op(start, sz, OP_FLUSH);
|
|
}
|
|
|
|
/*
|
|
* DMA ops for systems with IOC
|
|
* IOC hardware snoops all DMA traffic keeping the caches consistent with
|
|
* memory - eliding need for any explicit cache maintenance of DMA buffers
|
|
*/
|
|
static void __dma_cache_wback_inv_ioc(unsigned long start, unsigned long sz) {}
|
|
static void __dma_cache_inv_ioc(unsigned long start, unsigned long sz) {}
|
|
static void __dma_cache_wback_ioc(unsigned long start, unsigned long sz) {}
|
|
|
|
/*
|
|
* Exported DMA API
|
|
*/
|
|
void dma_cache_wback_inv(unsigned long start, unsigned long sz)
|
|
{
|
|
__dma_cache_wback_inv(start, sz);
|
|
}
|
|
EXPORT_SYMBOL(dma_cache_wback_inv);
|
|
|
|
void dma_cache_inv(unsigned long start, unsigned long sz)
|
|
{
|
|
__dma_cache_inv(start, sz);
|
|
}
|
|
EXPORT_SYMBOL(dma_cache_inv);
|
|
|
|
void dma_cache_wback(unsigned long start, unsigned long sz)
|
|
{
|
|
__dma_cache_wback(start, sz);
|
|
}
|
|
EXPORT_SYMBOL(dma_cache_wback);
|
|
|
|
/*
|
|
* This is API for making I/D Caches consistent when modifying
|
|
* kernel code (loadable modules, kprobes, kgdb...)
|
|
* This is called on insmod, with kernel virtual address for CODE of
|
|
* the module. ARC cache maintenance ops require PHY address thus we
|
|
* need to convert vmalloc addr to PHY addr
|
|
*/
|
|
void flush_icache_range(unsigned long kstart, unsigned long kend)
|
|
{
|
|
unsigned int tot_sz;
|
|
|
|
WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__);
|
|
|
|
/* Shortcut for bigger flush ranges.
|
|
* Here we don't care if this was kernel virtual or phy addr
|
|
*/
|
|
tot_sz = kend - kstart;
|
|
if (tot_sz > PAGE_SIZE) {
|
|
flush_cache_all();
|
|
return;
|
|
}
|
|
|
|
/* Case: Kernel Phy addr (0x8000_0000 onwards) */
|
|
if (likely(kstart > PAGE_OFFSET)) {
|
|
/*
|
|
* The 2nd arg despite being paddr will be used to index icache
|
|
* This is OK since no alternate virtual mappings will exist
|
|
* given the callers for this case: kprobe/kgdb in built-in
|
|
* kernel code only.
|
|
*/
|
|
__sync_icache_dcache(kstart, kstart, kend - kstart);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Case: Kernel Vaddr (0x7000_0000 to 0x7fff_ffff)
|
|
* (1) ARC Cache Maintenance ops only take Phy addr, hence special
|
|
* handling of kernel vaddr.
|
|
*
|
|
* (2) Despite @tot_sz being < PAGE_SIZE (bigger cases handled already),
|
|
* it still needs to handle a 2 page scenario, where the range
|
|
* straddles across 2 virtual pages and hence need for loop
|
|
*/
|
|
while (tot_sz > 0) {
|
|
unsigned int off, sz;
|
|
unsigned long phy, pfn;
|
|
|
|
off = kstart % PAGE_SIZE;
|
|
pfn = vmalloc_to_pfn((void *)kstart);
|
|
phy = (pfn << PAGE_SHIFT) + off;
|
|
sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off);
|
|
__sync_icache_dcache(phy, kstart, sz);
|
|
kstart += sz;
|
|
tot_sz -= sz;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(flush_icache_range);
|
|
|
|
/*
|
|
* General purpose helper to make I and D cache lines consistent.
|
|
* @paddr is phy addr of region
|
|
* @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
|
|
* However in one instance, when called by kprobe (for a breakpt in
|
|
* builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
|
|
* use a paddr to index the cache (despite VIPT). This is fine since since a
|
|
* builtin kernel page will not have any virtual mappings.
|
|
* kprobe on loadable module will be kernel vaddr.
|
|
*/
|
|
void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
|
|
{
|
|
__dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
|
|
__ic_line_inv_vaddr(paddr, vaddr, len);
|
|
}
|
|
|
|
/* wrapper to compile time eliminate alignment checks in flush loop */
|
|
void __inv_icache_page(unsigned long paddr, unsigned long vaddr)
|
|
{
|
|
__ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
|
|
}
|
|
|
|
/*
|
|
* wrapper to clearout kernel or userspace mappings of a page
|
|
* For kernel mappings @vaddr == @paddr
|
|
*/
|
|
void __flush_dcache_page(unsigned long paddr, unsigned long vaddr)
|
|
{
|
|
__dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
|
|
}
|
|
|
|
noinline void flush_cache_all(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
__ic_entire_inv();
|
|
__dc_entire_op(OP_FLUSH_N_INV);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
|
|
|
|
void flush_cache_mm(struct mm_struct *mm)
|
|
{
|
|
flush_cache_all();
|
|
}
|
|
|
|
void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
|
|
unsigned long pfn)
|
|
{
|
|
unsigned int paddr = pfn << PAGE_SHIFT;
|
|
|
|
u_vaddr &= PAGE_MASK;
|
|
|
|
__flush_dcache_page(paddr, u_vaddr);
|
|
|
|
if (vma->vm_flags & VM_EXEC)
|
|
__inv_icache_page(paddr, u_vaddr);
|
|
}
|
|
|
|
void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
|
|
unsigned long end)
|
|
{
|
|
flush_cache_all();
|
|
}
|
|
|
|
void flush_anon_page(struct vm_area_struct *vma, struct page *page,
|
|
unsigned long u_vaddr)
|
|
{
|
|
/* TBD: do we really need to clear the kernel mapping */
|
|
__flush_dcache_page(page_address(page), u_vaddr);
|
|
__flush_dcache_page(page_address(page), page_address(page));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
void copy_user_highpage(struct page *to, struct page *from,
|
|
unsigned long u_vaddr, struct vm_area_struct *vma)
|
|
{
|
|
unsigned long kfrom = (unsigned long)page_address(from);
|
|
unsigned long kto = (unsigned long)page_address(to);
|
|
int clean_src_k_mappings = 0;
|
|
|
|
/*
|
|
* If SRC page was already mapped in userspace AND it's U-mapping is
|
|
* not congruent with K-mapping, sync former to physical page so that
|
|
* K-mapping in memcpy below, sees the right data
|
|
*
|
|
* Note that while @u_vaddr refers to DST page's userspace vaddr, it is
|
|
* equally valid for SRC page as well
|
|
*/
|
|
if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
|
|
__flush_dcache_page(kfrom, u_vaddr);
|
|
clean_src_k_mappings = 1;
|
|
}
|
|
|
|
copy_page((void *)kto, (void *)kfrom);
|
|
|
|
/*
|
|
* Mark DST page K-mapping as dirty for a later finalization by
|
|
* update_mmu_cache(). Although the finalization could have been done
|
|
* here as well (given that both vaddr/paddr are available).
|
|
* But update_mmu_cache() already has code to do that for other
|
|
* non copied user pages (e.g. read faults which wire in pagecache page
|
|
* directly).
|
|
*/
|
|
clear_bit(PG_dc_clean, &to->flags);
|
|
|
|
/*
|
|
* if SRC was already usermapped and non-congruent to kernel mapping
|
|
* sync the kernel mapping back to physical page
|
|
*/
|
|
if (clean_src_k_mappings) {
|
|
__flush_dcache_page(kfrom, kfrom);
|
|
set_bit(PG_dc_clean, &from->flags);
|
|
} else {
|
|
clear_bit(PG_dc_clean, &from->flags);
|
|
}
|
|
}
|
|
|
|
void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
|
|
{
|
|
clear_page(to);
|
|
clear_bit(PG_dc_clean, &page->flags);
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* Explicit Cache flush request from user space via syscall
|
|
* Needed for JITs which generate code on the fly
|
|
*/
|
|
SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
|
|
{
|
|
/* TBD: optimize this */
|
|
flush_cache_all();
|
|
return 0;
|
|
}
|
|
|
|
void arc_cache_init(void)
|
|
{
|
|
unsigned int __maybe_unused cpu = smp_processor_id();
|
|
char str[256];
|
|
|
|
printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
|
|
|
|
if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
|
|
struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
|
|
|
|
if (!ic->ver)
|
|
panic("cache support enabled but non-existent cache\n");
|
|
|
|
if (ic->line_len != L1_CACHE_BYTES)
|
|
panic("ICache line [%d] != kernel Config [%d]",
|
|
ic->line_len, L1_CACHE_BYTES);
|
|
|
|
if (ic->ver != CONFIG_ARC_MMU_VER)
|
|
panic("Cache ver [%d] doesn't match MMU ver [%d]\n",
|
|
ic->ver, CONFIG_ARC_MMU_VER);
|
|
|
|
/*
|
|
* In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG
|
|
* pair to provide vaddr/paddr respectively, just as in MMU v3
|
|
*/
|
|
if (is_isa_arcv2() && ic->alias)
|
|
_cache_line_loop_ic_fn = __cache_line_loop_v3;
|
|
else
|
|
_cache_line_loop_ic_fn = __cache_line_loop;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
|
|
struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
|
|
|
|
if (!dc->ver)
|
|
panic("cache support enabled but non-existent cache\n");
|
|
|
|
if (dc->line_len != L1_CACHE_BYTES)
|
|
panic("DCache line [%d] != kernel Config [%d]",
|
|
dc->line_len, L1_CACHE_BYTES);
|
|
|
|
/* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */
|
|
if (is_isa_arcompact()) {
|
|
int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
|
|
|
|
if (dc->alias && !handled)
|
|
panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
|
|
else if (!dc->alias && handled)
|
|
panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
|
|
}
|
|
}
|
|
|
|
if (is_isa_arcv2() && ioc_exists) {
|
|
/* IO coherency base - 0x8z */
|
|
write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
|
|
/* IO coherency aperture size - 512Mb: 0x8z-0xAz */
|
|
write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11);
|
|
/* Enable partial writes */
|
|
write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
|
|
/* Enable IO coherency */
|
|
write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
|
|
|
|
__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
|
|
__dma_cache_inv = __dma_cache_inv_ioc;
|
|
__dma_cache_wback = __dma_cache_wback_ioc;
|
|
} else if (is_isa_arcv2() && l2_line_sz) {
|
|
__dma_cache_wback_inv = __dma_cache_wback_inv_slc;
|
|
__dma_cache_inv = __dma_cache_inv_slc;
|
|
__dma_cache_wback = __dma_cache_wback_slc;
|
|
} else {
|
|
__dma_cache_wback_inv = __dma_cache_wback_inv_l1;
|
|
__dma_cache_inv = __dma_cache_inv_l1;
|
|
__dma_cache_wback = __dma_cache_wback_l1;
|
|
}
|
|
}
|