kernel_optimize_test/drivers/net/irda/litelink.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

180 lines
4.7 KiB
C

/*********************************************************************
*
* Filename: litelink.c
* Version: 1.1
* Description: Driver for the Parallax LiteLink dongle
* Status: Stable
* Author: Dag Brattli <dagb@cs.uit.no>
* Created at: Fri May 7 12:50:33 1999
* Modified at: Fri Dec 17 09:14:23 1999
* Modified by: Dag Brattli <dagb@cs.uit.no>
*
* Copyright (c) 1999 Dag Brattli, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
********************************************************************/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/tty.h>
#include <linux/init.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
#define MAX_DELAY 10000 /* 1 ms */
static void litelink_open(dongle_t *self, struct qos_info *qos);
static void litelink_close(dongle_t *self);
static int litelink_change_speed(struct irda_task *task);
static int litelink_reset(struct irda_task *task);
/* These are the baudrates supported */
static __u32 baud_rates[] = { 115200, 57600, 38400, 19200, 9600 };
static struct dongle_reg dongle = {
.type = IRDA_LITELINK_DONGLE,
.open = litelink_open,
.close = litelink_close,
.reset = litelink_reset,
.change_speed = litelink_change_speed,
.owner = THIS_MODULE,
};
static int __init litelink_init(void)
{
return irda_device_register_dongle(&dongle);
}
static void __exit litelink_cleanup(void)
{
irda_device_unregister_dongle(&dongle);
}
static void litelink_open(dongle_t *self, struct qos_info *qos)
{
qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
}
static void litelink_close(dongle_t *self)
{
/* Power off dongle */
self->set_dtr_rts(self->dev, FALSE, FALSE);
}
/*
* Function litelink_change_speed (task)
*
* Change speed of the Litelink dongle. To cycle through the available
* baud rates, pulse RTS low for a few ms.
*/
static int litelink_change_speed(struct irda_task *task)
{
dongle_t *self = (dongle_t *) task->instance;
__u32 speed = (__u32) task->param;
int i;
/* Clear RTS to reset dongle */
self->set_dtr_rts(self->dev, TRUE, FALSE);
/* Sleep a minimum of 15 us */
udelay(MIN_DELAY);
/* Go back to normal mode */
self->set_dtr_rts(self->dev, TRUE, TRUE);
/* Sleep a minimum of 15 us */
udelay(MIN_DELAY);
/* Cycle through avaiable baudrates until we reach the correct one */
for (i=0; i<5 && baud_rates[i] != speed; i++) {
/* Set DTR, clear RTS */
self->set_dtr_rts(self->dev, FALSE, TRUE);
/* Sleep a minimum of 15 us */
udelay(MIN_DELAY);
/* Set DTR, Set RTS */
self->set_dtr_rts(self->dev, TRUE, TRUE);
/* Sleep a minimum of 15 us */
udelay(MIN_DELAY);
}
irda_task_next_state(task, IRDA_TASK_DONE);
return 0;
}
/*
* Function litelink_reset (task)
*
* Reset the Litelink type dongle.
*
*/
static int litelink_reset(struct irda_task *task)
{
dongle_t *self = (dongle_t *) task->instance;
/* Power on dongle */
self->set_dtr_rts(self->dev, TRUE, TRUE);
/* Sleep a minimum of 15 us */
udelay(MIN_DELAY);
/* Clear RTS to reset dongle */
self->set_dtr_rts(self->dev, TRUE, FALSE);
/* Sleep a minimum of 15 us */
udelay(MIN_DELAY);
/* Go back to normal mode */
self->set_dtr_rts(self->dev, TRUE, TRUE);
/* Sleep a minimum of 15 us */
udelay(MIN_DELAY);
/* This dongles speed defaults to 115200 bps */
self->speed = 115200;
irda_task_next_state(task, IRDA_TASK_DONE);
return 0;
}
MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
MODULE_DESCRIPTION("Parallax Litelink dongle driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("irda-dongle-5"); /* IRDA_LITELINK_DONGLE */
/*
* Function init_module (void)
*
* Initialize Litelink module
*
*/
module_init(litelink_init);
/*
* Function cleanup_module (void)
*
* Cleanup Litelink module
*
*/
module_exit(litelink_cleanup);