forked from luck/tmp_suning_uos_patched
f8ede0f700
Loongson 2F supports CPU clock scaling. When put it into wait mode by setting the frequency as ZERO it will stay in this mode until an external interrupt wakes the CPU again. To enable clock scaling support, an external timer of a known stable rate is required. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones <davej@redhat.com>, Cc: Dominik Brodowski <linux@dominikbrodowski.net>, Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/660/ Patchwork: http://patchwork.linux-mips.org/patch/751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
983 lines
23 KiB
C
983 lines
23 KiB
C
/*
|
|
* Processor capabilities determination functions.
|
|
*
|
|
* Copyright (C) xxxx the Anonymous
|
|
* Copyright (C) 1994 - 2006 Ralf Baechle
|
|
* Copyright (C) 2003, 2004 Maciej W. Rozycki
|
|
* Copyright (C) 2001, 2004 MIPS Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/bugs.h>
|
|
#include <asm/cpu.h>
|
|
#include <asm/fpu.h>
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/system.h>
|
|
#include <asm/watch.h>
|
|
#include <asm/spram.h>
|
|
/*
|
|
* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
|
|
* the implementation of the "wait" feature differs between CPU families. This
|
|
* points to the function that implements CPU specific wait.
|
|
* The wait instruction stops the pipeline and reduces the power consumption of
|
|
* the CPU very much.
|
|
*/
|
|
void (*cpu_wait)(void);
|
|
EXPORT_SYMBOL(cpu_wait);
|
|
|
|
static void r3081_wait(void)
|
|
{
|
|
unsigned long cfg = read_c0_conf();
|
|
write_c0_conf(cfg | R30XX_CONF_HALT);
|
|
}
|
|
|
|
static void r39xx_wait(void)
|
|
{
|
|
local_irq_disable();
|
|
if (!need_resched())
|
|
write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
|
|
local_irq_enable();
|
|
}
|
|
|
|
extern void r4k_wait(void);
|
|
|
|
/*
|
|
* This variant is preferable as it allows testing need_resched and going to
|
|
* sleep depending on the outcome atomically. Unfortunately the "It is
|
|
* implementation-dependent whether the pipeline restarts when a non-enabled
|
|
* interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
|
|
* using this version a gamble.
|
|
*/
|
|
void r4k_wait_irqoff(void)
|
|
{
|
|
local_irq_disable();
|
|
if (!need_resched())
|
|
__asm__(" .set push \n"
|
|
" .set mips3 \n"
|
|
" wait \n"
|
|
" .set pop \n");
|
|
local_irq_enable();
|
|
__asm__(" .globl __pastwait \n"
|
|
"__pastwait: \n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The RM7000 variant has to handle erratum 38. The workaround is to not
|
|
* have any pending stores when the WAIT instruction is executed.
|
|
*/
|
|
static void rm7k_wait_irqoff(void)
|
|
{
|
|
local_irq_disable();
|
|
if (!need_resched())
|
|
__asm__(
|
|
" .set push \n"
|
|
" .set mips3 \n"
|
|
" .set noat \n"
|
|
" mfc0 $1, $12 \n"
|
|
" sync \n"
|
|
" mtc0 $1, $12 # stalls until W stage \n"
|
|
" wait \n"
|
|
" mtc0 $1, $12 # stalls until W stage \n"
|
|
" .set pop \n");
|
|
local_irq_enable();
|
|
}
|
|
|
|
/*
|
|
* The Au1xxx wait is available only if using 32khz counter or
|
|
* external timer source, but specifically not CP0 Counter.
|
|
* alchemy/common/time.c may override cpu_wait!
|
|
*/
|
|
static void au1k_wait(void)
|
|
{
|
|
__asm__(" .set mips3 \n"
|
|
" cache 0x14, 0(%0) \n"
|
|
" cache 0x14, 32(%0) \n"
|
|
" sync \n"
|
|
" nop \n"
|
|
" wait \n"
|
|
" nop \n"
|
|
" nop \n"
|
|
" nop \n"
|
|
" nop \n"
|
|
" .set mips0 \n"
|
|
: : "r" (au1k_wait));
|
|
}
|
|
|
|
static int __initdata nowait;
|
|
|
|
static int __init wait_disable(char *s)
|
|
{
|
|
nowait = 1;
|
|
|
|
return 1;
|
|
}
|
|
|
|
__setup("nowait", wait_disable);
|
|
|
|
void __init check_wait(void)
|
|
{
|
|
struct cpuinfo_mips *c = ¤t_cpu_data;
|
|
|
|
if (nowait) {
|
|
printk("Wait instruction disabled.\n");
|
|
return;
|
|
}
|
|
|
|
switch (c->cputype) {
|
|
case CPU_R3081:
|
|
case CPU_R3081E:
|
|
cpu_wait = r3081_wait;
|
|
break;
|
|
case CPU_TX3927:
|
|
cpu_wait = r39xx_wait;
|
|
break;
|
|
case CPU_R4200:
|
|
/* case CPU_R4300: */
|
|
case CPU_R4600:
|
|
case CPU_R4640:
|
|
case CPU_R4650:
|
|
case CPU_R4700:
|
|
case CPU_R5000:
|
|
case CPU_R5500:
|
|
case CPU_NEVADA:
|
|
case CPU_4KC:
|
|
case CPU_4KEC:
|
|
case CPU_4KSC:
|
|
case CPU_5KC:
|
|
case CPU_25KF:
|
|
case CPU_PR4450:
|
|
case CPU_BCM3302:
|
|
case CPU_BCM6338:
|
|
case CPU_BCM6348:
|
|
case CPU_BCM6358:
|
|
case CPU_CAVIUM_OCTEON:
|
|
cpu_wait = r4k_wait;
|
|
break;
|
|
|
|
case CPU_RM7000:
|
|
cpu_wait = rm7k_wait_irqoff;
|
|
break;
|
|
|
|
case CPU_24K:
|
|
case CPU_34K:
|
|
case CPU_1004K:
|
|
cpu_wait = r4k_wait;
|
|
if (read_c0_config7() & MIPS_CONF7_WII)
|
|
cpu_wait = r4k_wait_irqoff;
|
|
break;
|
|
|
|
case CPU_74K:
|
|
cpu_wait = r4k_wait;
|
|
if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
|
|
cpu_wait = r4k_wait_irqoff;
|
|
break;
|
|
|
|
case CPU_TX49XX:
|
|
cpu_wait = r4k_wait_irqoff;
|
|
break;
|
|
case CPU_ALCHEMY:
|
|
cpu_wait = au1k_wait;
|
|
break;
|
|
case CPU_20KC:
|
|
/*
|
|
* WAIT on Rev1.0 has E1, E2, E3 and E16.
|
|
* WAIT on Rev2.0 and Rev3.0 has E16.
|
|
* Rev3.1 WAIT is nop, why bother
|
|
*/
|
|
if ((c->processor_id & 0xff) <= 0x64)
|
|
break;
|
|
|
|
/*
|
|
* Another rev is incremeting c0_count at a reduced clock
|
|
* rate while in WAIT mode. So we basically have the choice
|
|
* between using the cp0 timer as clocksource or avoiding
|
|
* the WAIT instruction. Until more details are known,
|
|
* disable the use of WAIT for 20Kc entirely.
|
|
cpu_wait = r4k_wait;
|
|
*/
|
|
break;
|
|
case CPU_RM9000:
|
|
if ((c->processor_id & 0x00ff) >= 0x40)
|
|
cpu_wait = r4k_wait;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void check_errata(void)
|
|
{
|
|
struct cpuinfo_mips *c = ¤t_cpu_data;
|
|
|
|
switch (c->cputype) {
|
|
case CPU_34K:
|
|
/*
|
|
* Erratum "RPS May Cause Incorrect Instruction Execution"
|
|
* This code only handles VPE0, any SMP/SMTC/RTOS code
|
|
* making use of VPE1 will be responsable for that VPE.
|
|
*/
|
|
if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
|
|
write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void __init check_bugs32(void)
|
|
{
|
|
check_errata();
|
|
}
|
|
|
|
/*
|
|
* Probe whether cpu has config register by trying to play with
|
|
* alternate cache bit and see whether it matters.
|
|
* It's used by cpu_probe to distinguish between R3000A and R3081.
|
|
*/
|
|
static inline int cpu_has_confreg(void)
|
|
{
|
|
#ifdef CONFIG_CPU_R3000
|
|
extern unsigned long r3k_cache_size(unsigned long);
|
|
unsigned long size1, size2;
|
|
unsigned long cfg = read_c0_conf();
|
|
|
|
size1 = r3k_cache_size(ST0_ISC);
|
|
write_c0_conf(cfg ^ R30XX_CONF_AC);
|
|
size2 = r3k_cache_size(ST0_ISC);
|
|
write_c0_conf(cfg);
|
|
return size1 != size2;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Get the FPU Implementation/Revision.
|
|
*/
|
|
static inline unsigned long cpu_get_fpu_id(void)
|
|
{
|
|
unsigned long tmp, fpu_id;
|
|
|
|
tmp = read_c0_status();
|
|
__enable_fpu();
|
|
fpu_id = read_32bit_cp1_register(CP1_REVISION);
|
|
write_c0_status(tmp);
|
|
return fpu_id;
|
|
}
|
|
|
|
/*
|
|
* Check the CPU has an FPU the official way.
|
|
*/
|
|
static inline int __cpu_has_fpu(void)
|
|
{
|
|
return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
|
|
}
|
|
|
|
#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
|
|
| MIPS_CPU_COUNTER)
|
|
|
|
static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
switch (c->processor_id & 0xff00) {
|
|
case PRID_IMP_R2000:
|
|
c->cputype = CPU_R2000;
|
|
__cpu_name[cpu] = "R2000";
|
|
c->isa_level = MIPS_CPU_ISA_I;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
|
|
MIPS_CPU_NOFPUEX;
|
|
if (__cpu_has_fpu())
|
|
c->options |= MIPS_CPU_FPU;
|
|
c->tlbsize = 64;
|
|
break;
|
|
case PRID_IMP_R3000:
|
|
if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
|
|
if (cpu_has_confreg()) {
|
|
c->cputype = CPU_R3081E;
|
|
__cpu_name[cpu] = "R3081";
|
|
} else {
|
|
c->cputype = CPU_R3000A;
|
|
__cpu_name[cpu] = "R3000A";
|
|
}
|
|
break;
|
|
} else {
|
|
c->cputype = CPU_R3000;
|
|
__cpu_name[cpu] = "R3000";
|
|
}
|
|
c->isa_level = MIPS_CPU_ISA_I;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
|
|
MIPS_CPU_NOFPUEX;
|
|
if (__cpu_has_fpu())
|
|
c->options |= MIPS_CPU_FPU;
|
|
c->tlbsize = 64;
|
|
break;
|
|
case PRID_IMP_R4000:
|
|
if (read_c0_config() & CONF_SC) {
|
|
if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
|
|
c->cputype = CPU_R4400PC;
|
|
__cpu_name[cpu] = "R4400PC";
|
|
} else {
|
|
c->cputype = CPU_R4000PC;
|
|
__cpu_name[cpu] = "R4000PC";
|
|
}
|
|
} else {
|
|
if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
|
|
c->cputype = CPU_R4400SC;
|
|
__cpu_name[cpu] = "R4400SC";
|
|
} else {
|
|
c->cputype = CPU_R4000SC;
|
|
__cpu_name[cpu] = "R4000SC";
|
|
}
|
|
}
|
|
|
|
c->isa_level = MIPS_CPU_ISA_III;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_WATCH | MIPS_CPU_VCE |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 48;
|
|
break;
|
|
case PRID_IMP_VR41XX:
|
|
switch (c->processor_id & 0xf0) {
|
|
case PRID_REV_VR4111:
|
|
c->cputype = CPU_VR4111;
|
|
__cpu_name[cpu] = "NEC VR4111";
|
|
break;
|
|
case PRID_REV_VR4121:
|
|
c->cputype = CPU_VR4121;
|
|
__cpu_name[cpu] = "NEC VR4121";
|
|
break;
|
|
case PRID_REV_VR4122:
|
|
if ((c->processor_id & 0xf) < 0x3) {
|
|
c->cputype = CPU_VR4122;
|
|
__cpu_name[cpu] = "NEC VR4122";
|
|
} else {
|
|
c->cputype = CPU_VR4181A;
|
|
__cpu_name[cpu] = "NEC VR4181A";
|
|
}
|
|
break;
|
|
case PRID_REV_VR4130:
|
|
if ((c->processor_id & 0xf) < 0x4) {
|
|
c->cputype = CPU_VR4131;
|
|
__cpu_name[cpu] = "NEC VR4131";
|
|
} else {
|
|
c->cputype = CPU_VR4133;
|
|
__cpu_name[cpu] = "NEC VR4133";
|
|
}
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n");
|
|
c->cputype = CPU_VR41XX;
|
|
__cpu_name[cpu] = "NEC Vr41xx";
|
|
break;
|
|
}
|
|
c->isa_level = MIPS_CPU_ISA_III;
|
|
c->options = R4K_OPTS;
|
|
c->tlbsize = 32;
|
|
break;
|
|
case PRID_IMP_R4300:
|
|
c->cputype = CPU_R4300;
|
|
__cpu_name[cpu] = "R4300";
|
|
c->isa_level = MIPS_CPU_ISA_III;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 32;
|
|
break;
|
|
case PRID_IMP_R4600:
|
|
c->cputype = CPU_R4600;
|
|
__cpu_name[cpu] = "R4600";
|
|
c->isa_level = MIPS_CPU_ISA_III;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 48;
|
|
break;
|
|
#if 0
|
|
case PRID_IMP_R4650:
|
|
/*
|
|
* This processor doesn't have an MMU, so it's not
|
|
* "real easy" to run Linux on it. It is left purely
|
|
* for documentation. Commented out because it shares
|
|
* it's c0_prid id number with the TX3900.
|
|
*/
|
|
c->cputype = CPU_R4650;
|
|
__cpu_name[cpu] = "R4650";
|
|
c->isa_level = MIPS_CPU_ISA_III;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
|
|
c->tlbsize = 48;
|
|
break;
|
|
#endif
|
|
case PRID_IMP_TX39:
|
|
c->isa_level = MIPS_CPU_ISA_I;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
|
|
|
|
if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
|
|
c->cputype = CPU_TX3927;
|
|
__cpu_name[cpu] = "TX3927";
|
|
c->tlbsize = 64;
|
|
} else {
|
|
switch (c->processor_id & 0xff) {
|
|
case PRID_REV_TX3912:
|
|
c->cputype = CPU_TX3912;
|
|
__cpu_name[cpu] = "TX3912";
|
|
c->tlbsize = 32;
|
|
break;
|
|
case PRID_REV_TX3922:
|
|
c->cputype = CPU_TX3922;
|
|
__cpu_name[cpu] = "TX3922";
|
|
c->tlbsize = 64;
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
case PRID_IMP_R4700:
|
|
c->cputype = CPU_R4700;
|
|
__cpu_name[cpu] = "R4700";
|
|
c->isa_level = MIPS_CPU_ISA_III;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 48;
|
|
break;
|
|
case PRID_IMP_TX49:
|
|
c->cputype = CPU_TX49XX;
|
|
__cpu_name[cpu] = "R49XX";
|
|
c->isa_level = MIPS_CPU_ISA_III;
|
|
c->options = R4K_OPTS | MIPS_CPU_LLSC;
|
|
if (!(c->processor_id & 0x08))
|
|
c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
|
|
c->tlbsize = 48;
|
|
break;
|
|
case PRID_IMP_R5000:
|
|
c->cputype = CPU_R5000;
|
|
__cpu_name[cpu] = "R5000";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 48;
|
|
break;
|
|
case PRID_IMP_R5432:
|
|
c->cputype = CPU_R5432;
|
|
__cpu_name[cpu] = "R5432";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
|
|
c->tlbsize = 48;
|
|
break;
|
|
case PRID_IMP_R5500:
|
|
c->cputype = CPU_R5500;
|
|
__cpu_name[cpu] = "R5500";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
|
|
c->tlbsize = 48;
|
|
break;
|
|
case PRID_IMP_NEVADA:
|
|
c->cputype = CPU_NEVADA;
|
|
__cpu_name[cpu] = "Nevada";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
|
|
c->tlbsize = 48;
|
|
break;
|
|
case PRID_IMP_R6000:
|
|
c->cputype = CPU_R6000;
|
|
__cpu_name[cpu] = "R6000";
|
|
c->isa_level = MIPS_CPU_ISA_II;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 32;
|
|
break;
|
|
case PRID_IMP_R6000A:
|
|
c->cputype = CPU_R6000A;
|
|
__cpu_name[cpu] = "R6000A";
|
|
c->isa_level = MIPS_CPU_ISA_II;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 32;
|
|
break;
|
|
case PRID_IMP_RM7000:
|
|
c->cputype = CPU_RM7000;
|
|
__cpu_name[cpu] = "RM7000";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_LLSC;
|
|
/*
|
|
* Undocumented RM7000: Bit 29 in the info register of
|
|
* the RM7000 v2.0 indicates if the TLB has 48 or 64
|
|
* entries.
|
|
*
|
|
* 29 1 => 64 entry JTLB
|
|
* 0 => 48 entry JTLB
|
|
*/
|
|
c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
|
|
break;
|
|
case PRID_IMP_RM9000:
|
|
c->cputype = CPU_RM9000;
|
|
__cpu_name[cpu] = "RM9000";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_LLSC;
|
|
/*
|
|
* Bit 29 in the info register of the RM9000
|
|
* indicates if the TLB has 48 or 64 entries.
|
|
*
|
|
* 29 1 => 64 entry JTLB
|
|
* 0 => 48 entry JTLB
|
|
*/
|
|
c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
|
|
break;
|
|
case PRID_IMP_R8000:
|
|
c->cputype = CPU_R8000;
|
|
__cpu_name[cpu] = "RM8000";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
|
|
MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 384; /* has weird TLB: 3-way x 128 */
|
|
break;
|
|
case PRID_IMP_R10000:
|
|
c->cputype = CPU_R10000;
|
|
__cpu_name[cpu] = "R10000";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
|
|
MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 64;
|
|
break;
|
|
case PRID_IMP_R12000:
|
|
c->cputype = CPU_R12000;
|
|
__cpu_name[cpu] = "R12000";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
|
|
MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 64;
|
|
break;
|
|
case PRID_IMP_R14000:
|
|
c->cputype = CPU_R14000;
|
|
__cpu_name[cpu] = "R14000";
|
|
c->isa_level = MIPS_CPU_ISA_IV;
|
|
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
|
|
MIPS_CPU_FPU | MIPS_CPU_32FPR |
|
|
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
|
|
MIPS_CPU_LLSC;
|
|
c->tlbsize = 64;
|
|
break;
|
|
case PRID_IMP_LOONGSON2:
|
|
c->cputype = CPU_LOONGSON2;
|
|
__cpu_name[cpu] = "ICT Loongson-2";
|
|
c->isa_level = MIPS_CPU_ISA_III;
|
|
c->options = R4K_OPTS |
|
|
MIPS_CPU_FPU | MIPS_CPU_LLSC |
|
|
MIPS_CPU_32FPR;
|
|
c->tlbsize = 64;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static char unknown_isa[] __cpuinitdata = KERN_ERR \
|
|
"Unsupported ISA type, c0.config0: %d.";
|
|
|
|
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
|
|
{
|
|
unsigned int config0;
|
|
int isa;
|
|
|
|
config0 = read_c0_config();
|
|
|
|
if (((config0 & MIPS_CONF_MT) >> 7) == 1)
|
|
c->options |= MIPS_CPU_TLB;
|
|
isa = (config0 & MIPS_CONF_AT) >> 13;
|
|
switch (isa) {
|
|
case 0:
|
|
switch ((config0 & MIPS_CONF_AR) >> 10) {
|
|
case 0:
|
|
c->isa_level = MIPS_CPU_ISA_M32R1;
|
|
break;
|
|
case 1:
|
|
c->isa_level = MIPS_CPU_ISA_M32R2;
|
|
break;
|
|
default:
|
|
goto unknown;
|
|
}
|
|
break;
|
|
case 2:
|
|
switch ((config0 & MIPS_CONF_AR) >> 10) {
|
|
case 0:
|
|
c->isa_level = MIPS_CPU_ISA_M64R1;
|
|
break;
|
|
case 1:
|
|
c->isa_level = MIPS_CPU_ISA_M64R2;
|
|
break;
|
|
default:
|
|
goto unknown;
|
|
}
|
|
break;
|
|
default:
|
|
goto unknown;
|
|
}
|
|
|
|
return config0 & MIPS_CONF_M;
|
|
|
|
unknown:
|
|
panic(unknown_isa, config0);
|
|
}
|
|
|
|
static inline unsigned int decode_config1(struct cpuinfo_mips *c)
|
|
{
|
|
unsigned int config1;
|
|
|
|
config1 = read_c0_config1();
|
|
|
|
if (config1 & MIPS_CONF1_MD)
|
|
c->ases |= MIPS_ASE_MDMX;
|
|
if (config1 & MIPS_CONF1_WR)
|
|
c->options |= MIPS_CPU_WATCH;
|
|
if (config1 & MIPS_CONF1_CA)
|
|
c->ases |= MIPS_ASE_MIPS16;
|
|
if (config1 & MIPS_CONF1_EP)
|
|
c->options |= MIPS_CPU_EJTAG;
|
|
if (config1 & MIPS_CONF1_FP) {
|
|
c->options |= MIPS_CPU_FPU;
|
|
c->options |= MIPS_CPU_32FPR;
|
|
}
|
|
if (cpu_has_tlb)
|
|
c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
|
|
|
|
return config1 & MIPS_CONF_M;
|
|
}
|
|
|
|
static inline unsigned int decode_config2(struct cpuinfo_mips *c)
|
|
{
|
|
unsigned int config2;
|
|
|
|
config2 = read_c0_config2();
|
|
|
|
if (config2 & MIPS_CONF2_SL)
|
|
c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
|
|
|
|
return config2 & MIPS_CONF_M;
|
|
}
|
|
|
|
static inline unsigned int decode_config3(struct cpuinfo_mips *c)
|
|
{
|
|
unsigned int config3;
|
|
|
|
config3 = read_c0_config3();
|
|
|
|
if (config3 & MIPS_CONF3_SM)
|
|
c->ases |= MIPS_ASE_SMARTMIPS;
|
|
if (config3 & MIPS_CONF3_DSP)
|
|
c->ases |= MIPS_ASE_DSP;
|
|
if (config3 & MIPS_CONF3_VINT)
|
|
c->options |= MIPS_CPU_VINT;
|
|
if (config3 & MIPS_CONF3_VEIC)
|
|
c->options |= MIPS_CPU_VEIC;
|
|
if (config3 & MIPS_CONF3_MT)
|
|
c->ases |= MIPS_ASE_MIPSMT;
|
|
if (config3 & MIPS_CONF3_ULRI)
|
|
c->options |= MIPS_CPU_ULRI;
|
|
|
|
return config3 & MIPS_CONF_M;
|
|
}
|
|
|
|
static void __cpuinit decode_configs(struct cpuinfo_mips *c)
|
|
{
|
|
int ok;
|
|
|
|
/* MIPS32 or MIPS64 compliant CPU. */
|
|
c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
|
|
MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
|
|
|
|
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
|
|
|
|
ok = decode_config0(c); /* Read Config registers. */
|
|
BUG_ON(!ok); /* Arch spec violation! */
|
|
if (ok)
|
|
ok = decode_config1(c);
|
|
if (ok)
|
|
ok = decode_config2(c);
|
|
if (ok)
|
|
ok = decode_config3(c);
|
|
|
|
mips_probe_watch_registers(c);
|
|
}
|
|
|
|
static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
decode_configs(c);
|
|
switch (c->processor_id & 0xff00) {
|
|
case PRID_IMP_4KC:
|
|
c->cputype = CPU_4KC;
|
|
__cpu_name[cpu] = "MIPS 4Kc";
|
|
break;
|
|
case PRID_IMP_4KEC:
|
|
c->cputype = CPU_4KEC;
|
|
__cpu_name[cpu] = "MIPS 4KEc";
|
|
break;
|
|
case PRID_IMP_4KECR2:
|
|
c->cputype = CPU_4KEC;
|
|
__cpu_name[cpu] = "MIPS 4KEc";
|
|
break;
|
|
case PRID_IMP_4KSC:
|
|
case PRID_IMP_4KSD:
|
|
c->cputype = CPU_4KSC;
|
|
__cpu_name[cpu] = "MIPS 4KSc";
|
|
break;
|
|
case PRID_IMP_5KC:
|
|
c->cputype = CPU_5KC;
|
|
__cpu_name[cpu] = "MIPS 5Kc";
|
|
break;
|
|
case PRID_IMP_20KC:
|
|
c->cputype = CPU_20KC;
|
|
__cpu_name[cpu] = "MIPS 20Kc";
|
|
break;
|
|
case PRID_IMP_24K:
|
|
case PRID_IMP_24KE:
|
|
c->cputype = CPU_24K;
|
|
__cpu_name[cpu] = "MIPS 24Kc";
|
|
break;
|
|
case PRID_IMP_25KF:
|
|
c->cputype = CPU_25KF;
|
|
__cpu_name[cpu] = "MIPS 25Kc";
|
|
break;
|
|
case PRID_IMP_34K:
|
|
c->cputype = CPU_34K;
|
|
__cpu_name[cpu] = "MIPS 34Kc";
|
|
break;
|
|
case PRID_IMP_74K:
|
|
c->cputype = CPU_74K;
|
|
__cpu_name[cpu] = "MIPS 74Kc";
|
|
break;
|
|
case PRID_IMP_1004K:
|
|
c->cputype = CPU_1004K;
|
|
__cpu_name[cpu] = "MIPS 1004Kc";
|
|
break;
|
|
}
|
|
|
|
spram_config();
|
|
}
|
|
|
|
static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
decode_configs(c);
|
|
switch (c->processor_id & 0xff00) {
|
|
case PRID_IMP_AU1_REV1:
|
|
case PRID_IMP_AU1_REV2:
|
|
c->cputype = CPU_ALCHEMY;
|
|
switch ((c->processor_id >> 24) & 0xff) {
|
|
case 0:
|
|
__cpu_name[cpu] = "Au1000";
|
|
break;
|
|
case 1:
|
|
__cpu_name[cpu] = "Au1500";
|
|
break;
|
|
case 2:
|
|
__cpu_name[cpu] = "Au1100";
|
|
break;
|
|
case 3:
|
|
__cpu_name[cpu] = "Au1550";
|
|
break;
|
|
case 4:
|
|
__cpu_name[cpu] = "Au1200";
|
|
if ((c->processor_id & 0xff) == 2)
|
|
__cpu_name[cpu] = "Au1250";
|
|
break;
|
|
case 5:
|
|
__cpu_name[cpu] = "Au1210";
|
|
break;
|
|
default:
|
|
__cpu_name[cpu] = "Au1xxx";
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
decode_configs(c);
|
|
|
|
switch (c->processor_id & 0xff00) {
|
|
case PRID_IMP_SB1:
|
|
c->cputype = CPU_SB1;
|
|
__cpu_name[cpu] = "SiByte SB1";
|
|
/* FPU in pass1 is known to have issues. */
|
|
if ((c->processor_id & 0xff) < 0x02)
|
|
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
|
|
break;
|
|
case PRID_IMP_SB1A:
|
|
c->cputype = CPU_SB1A;
|
|
__cpu_name[cpu] = "SiByte SB1A";
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
decode_configs(c);
|
|
switch (c->processor_id & 0xff00) {
|
|
case PRID_IMP_SR71000:
|
|
c->cputype = CPU_SR71000;
|
|
__cpu_name[cpu] = "Sandcraft SR71000";
|
|
c->scache.ways = 8;
|
|
c->tlbsize = 64;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
decode_configs(c);
|
|
switch (c->processor_id & 0xff00) {
|
|
case PRID_IMP_PR4450:
|
|
c->cputype = CPU_PR4450;
|
|
__cpu_name[cpu] = "Philips PR4450";
|
|
c->isa_level = MIPS_CPU_ISA_M32R1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
decode_configs(c);
|
|
switch (c->processor_id & 0xff00) {
|
|
case PRID_IMP_BCM3302:
|
|
/* same as PRID_IMP_BCM6338 */
|
|
c->cputype = CPU_BCM3302;
|
|
__cpu_name[cpu] = "Broadcom BCM3302";
|
|
break;
|
|
case PRID_IMP_BCM4710:
|
|
c->cputype = CPU_BCM4710;
|
|
__cpu_name[cpu] = "Broadcom BCM4710";
|
|
break;
|
|
case PRID_IMP_BCM6345:
|
|
c->cputype = CPU_BCM6345;
|
|
__cpu_name[cpu] = "Broadcom BCM6345";
|
|
break;
|
|
case PRID_IMP_BCM6348:
|
|
c->cputype = CPU_BCM6348;
|
|
__cpu_name[cpu] = "Broadcom BCM6348";
|
|
break;
|
|
case PRID_IMP_BCM4350:
|
|
switch (c->processor_id & 0xf0) {
|
|
case PRID_REV_BCM6358:
|
|
c->cputype = CPU_BCM6358;
|
|
__cpu_name[cpu] = "Broadcom BCM6358";
|
|
break;
|
|
default:
|
|
c->cputype = CPU_UNKNOWN;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
decode_configs(c);
|
|
switch (c->processor_id & 0xff00) {
|
|
case PRID_IMP_CAVIUM_CN38XX:
|
|
case PRID_IMP_CAVIUM_CN31XX:
|
|
case PRID_IMP_CAVIUM_CN30XX:
|
|
case PRID_IMP_CAVIUM_CN58XX:
|
|
case PRID_IMP_CAVIUM_CN56XX:
|
|
case PRID_IMP_CAVIUM_CN50XX:
|
|
case PRID_IMP_CAVIUM_CN52XX:
|
|
c->cputype = CPU_CAVIUM_OCTEON;
|
|
__cpu_name[cpu] = "Cavium Octeon";
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "Unknown Octeon chip!\n");
|
|
c->cputype = CPU_UNKNOWN;
|
|
break;
|
|
}
|
|
}
|
|
|
|
const char *__cpu_name[NR_CPUS];
|
|
|
|
__cpuinit void cpu_probe(void)
|
|
{
|
|
struct cpuinfo_mips *c = ¤t_cpu_data;
|
|
unsigned int cpu = smp_processor_id();
|
|
|
|
c->processor_id = PRID_IMP_UNKNOWN;
|
|
c->fpu_id = FPIR_IMP_NONE;
|
|
c->cputype = CPU_UNKNOWN;
|
|
|
|
c->processor_id = read_c0_prid();
|
|
switch (c->processor_id & 0xff0000) {
|
|
case PRID_COMP_LEGACY:
|
|
cpu_probe_legacy(c, cpu);
|
|
break;
|
|
case PRID_COMP_MIPS:
|
|
cpu_probe_mips(c, cpu);
|
|
break;
|
|
case PRID_COMP_ALCHEMY:
|
|
cpu_probe_alchemy(c, cpu);
|
|
break;
|
|
case PRID_COMP_SIBYTE:
|
|
cpu_probe_sibyte(c, cpu);
|
|
break;
|
|
case PRID_COMP_BROADCOM:
|
|
cpu_probe_broadcom(c, cpu);
|
|
break;
|
|
case PRID_COMP_SANDCRAFT:
|
|
cpu_probe_sandcraft(c, cpu);
|
|
break;
|
|
case PRID_COMP_NXP:
|
|
cpu_probe_nxp(c, cpu);
|
|
break;
|
|
case PRID_COMP_CAVIUM:
|
|
cpu_probe_cavium(c, cpu);
|
|
break;
|
|
}
|
|
|
|
BUG_ON(!__cpu_name[cpu]);
|
|
BUG_ON(c->cputype == CPU_UNKNOWN);
|
|
|
|
/*
|
|
* Platform code can force the cpu type to optimize code
|
|
* generation. In that case be sure the cpu type is correctly
|
|
* manually setup otherwise it could trigger some nasty bugs.
|
|
*/
|
|
BUG_ON(current_cpu_type() != c->cputype);
|
|
|
|
if (c->options & MIPS_CPU_FPU) {
|
|
c->fpu_id = cpu_get_fpu_id();
|
|
|
|
if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
|
|
c->isa_level == MIPS_CPU_ISA_M32R2 ||
|
|
c->isa_level == MIPS_CPU_ISA_M64R1 ||
|
|
c->isa_level == MIPS_CPU_ISA_M64R2) {
|
|
if (c->fpu_id & MIPS_FPIR_3D)
|
|
c->ases |= MIPS_ASE_MIPS3D;
|
|
}
|
|
}
|
|
|
|
if (cpu_has_mips_r2)
|
|
c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
|
|
else
|
|
c->srsets = 1;
|
|
}
|
|
|
|
__cpuinit void cpu_report(void)
|
|
{
|
|
struct cpuinfo_mips *c = ¤t_cpu_data;
|
|
|
|
printk(KERN_INFO "CPU revision is: %08x (%s)\n",
|
|
c->processor_id, cpu_name_string());
|
|
if (c->options & MIPS_CPU_FPU)
|
|
printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
|
|
}
|