kernel_optimize_test/arch/arm/mach-sa1100/pm.c
Russell King 3169663ac5 ARM: sa11x0/pxa: convert OS timer registers to IOMEM
Make the OS timer registers have IOMEM like properities so they can
be passed to readl_relaxed/writel_relaxed() et.al. rather than being
straight volatile dereferences.  Add linux/io.h includes where
required.

linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c,
 arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c
 drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c
from Arnd.

This fixes these warnings:

arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init':
arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type
arch/arm/mach-pxa/time.c: In function 'pxa_timer_init':
arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-09 17:37:35 +01:00

126 lines
2.6 KiB
C

/*
* SA1100 Power Management Routines
*
* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License.
*
* History:
*
* 2001-02-06: Cliff Brake Initial code
*
* 2001-02-25: Sukjae Cho <sjcho@east.isi.edu> &
* Chester Kuo <chester@linux.org.tw>
* Save more value for the resume function! Support
* Bitsy/Assabet/Freebird board
*
* 2001-08-29: Nicolas Pitre <nico@fluxnic.net>
* Cleaned up, pushed platform dependent stuff
* in the platform specific files.
*
* 2002-05-27: Nicolas Pitre Killed sleep.h and the kmalloced save array.
* Storage is local on the stack now.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
#include <mach/hardware.h>
#include <asm/memory.h>
#include <asm/suspend.h>
#include <asm/mach/time.h>
extern int sa1100_finish_suspend(unsigned long);
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
/*
* List of global SA11x0 peripheral registers to preserve.
* More ones like CP and general purpose register values are preserved
* on the stack and then the stack pointer is stored last in sleep.S.
*/
enum { SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
SLEEP_SAVE_Ser1SDCR0,
SLEEP_SAVE_COUNT
};
static int sa11x0_pm_enter(suspend_state_t state)
{
unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
gpio = GPLR;
/* save vital registers */
SAVE(GPDR);
SAVE(GAFR);
SAVE(PPDR);
SAVE(PPSR);
SAVE(PPAR);
SAVE(PSDR);
SAVE(Ser1SDCR0);
/* Clear previous reset status */
RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;
/* set resume return address */
PSPR = virt_to_phys(cpu_resume);
/* go zzz */
cpu_suspend(0, sa1100_finish_suspend);
/*
* Ensure not to come back here if it wasn't intended
*/
PSPR = 0;
/*
* Ensure interrupt sources are disabled; we will re-init
* the interrupt subsystem via the device manager.
*/
ICLR = 0;
ICCR = 1;
ICMR = 0;
/* restore registers */
RESTORE(GPDR);
RESTORE(GAFR);
RESTORE(PPDR);
RESTORE(PPSR);
RESTORE(PPAR);
RESTORE(PSDR);
RESTORE(Ser1SDCR0);
GPSR = gpio;
GPCR = ~gpio;
/*
* Clear the peripheral sleep-hold bit.
*/
PSSR = PSSR_PH;
return 0;
}
static const struct platform_suspend_ops sa11x0_pm_ops = {
.enter = sa11x0_pm_enter,
.valid = suspend_valid_only_mem,
};
int __init sa11x0_pm_init(void)
{
suspend_set_ops(&sa11x0_pm_ops);
return 0;
}