kernel_optimize_test/arch/arm
eric miao fef06d274f [ARM] pxa: use new pin configuration mechanism for mainstone
1. the following code to configure PGSRx is no way portable and
   intuitive:

-	PGSR0 = 0x00008800;
-       PGSR1 = 0x00000002;
-       PGSR2 = 0x0001FC00;
-       PGSR3 = 0x00001F81;

   this is removed as low power state has already been encoded in
   the pin configuration definitions.

   Note: there is no specific reason for some of the GPIOs to drive
   high in low power mode as indicated by the above setting, those
   bits are ignored, and the result is validated to work.

2. the following code to configure GPIO wakeup is removed as this
   is now totally handled by pxa2xx_mfp_config():

-       PWER  = 0xC0000002;
-       PRER  = 0x00000002;
-       PFER  = 0x00000002;

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:05 +01:00
..
boot Merge branch 'orion' into devel 2008-01-28 13:21:30 +00:00
common [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
configs ARM: OMAP1: Compile in other 16xx boards to OSK defconfig 2008-03-06 13:28:06 +02:00
kernel [ARM] 4870/1: fix signal return code when enable CONFIG_OABI_COMPAT 2008-03-20 15:59:31 +00:00
lib [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
mach-aaec2000 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-at91 [ARM] AT91: correct at91sam9263ek LCD power gpio pin 2008-03-06 12:18:18 +00:00
mach-clps711x [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-clps7500 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-davinci [ARM] constify function pointer tables 2008-02-09 22:46:44 +00:00
mach-ebsa110 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-ep93xx Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-footbridge [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-h720x [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-imx [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-integrator Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-iop13xx [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-iop32x [ARM] 4865/1: Register the F75375 device in the GLAN Tank platform code 2008-03-20 15:59:30 +00:00
mach-iop33x iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver 2007-07-13 08:06:19 -07:00
mach-ixp4xx [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-ixp23xx [ARM] remove duplicate includes 2008-01-26 14:50:07 +00:00
mach-ixp2000 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-ks8695 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-l7200
mach-lh7a40x [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-msm [ARM] msm: dma support for MSM7X00A 2008-01-26 14:39:14 +00:00
mach-mx3 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-netx [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-ns9xxx [ARM] 4851/1: ns9xxx: fix size of gpiores 2008-03-08 15:53:45 +00:00
mach-omap1 ARM: OMAP1: Fix typo in OMAP1 MPU clock source initialization 2008-03-20 16:57:54 +02:00
mach-omap2 ARM: OMAP2: Register the L4 io bus to boot OMAP2 2008-03-06 13:28:06 +02:00
mach-orion [ARM] 4856/1: Orion: initialise the sixth PCIe MBUS mapping window as well 2008-03-08 15:53:49 +00:00
mach-pnx4008 [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-pxa [ARM] pxa: use new pin configuration mechanism for mainstone 2008-04-19 11:29:05 +01:00
mach-realview [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option 2008-02-04 17:52:28 +00:00
mach-rpc Rename: linux/pata_platform.h to linux/ata_platform.h 2008-02-06 06:54:17 -05:00
mach-s3c2400
mach-s3c2410 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-s3c2412 [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk 2008-01-28 13:20:52 +00:00
mach-s3c2440 [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code 2008-01-28 13:20:52 +00:00
mach-s3c2442 [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code 2008-01-28 13:20:52 +00:00
mach-s3c2443 Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
mach-sa1100 [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-shark [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-versatile [ARM] 4454/1: Use word accesses in Versatile PCI config reads 2007-07-02 13:39:35 +01:00
mm [ARM] 4864/1: Enable write buffer coalescing on IOP 2008-03-20 15:59:30 +00:00
nwfpe Convert files to UTF-8 and some cleanups 2007-10-19 23:21:04 +02:00
oprofile Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
plat-iop [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
plat-mxc [ARM] 4461/1: MXC platform and i.MX31ADS core support 2007-07-22 15:44:46 +01:00
plat-omap ARM: OMAP: Fix DMA CLINK mask, clear spurious interrupt 2008-03-20 16:57:54 +02:00
plat-s3c [ARM] 4518/1: S3C: Rename watchdog configuration options 2007-07-22 16:44:38 +01:00
plat-s3c24xx [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
tools [ARM] Update mach-types 2008-04-19 11:28:05 +01:00
vfp [ARM] 4583/1: ARMv7: Add VFPv3 support 2008-01-26 14:41:28 +00:00
Kconfig ARM: OMAP: Fix clockevent support for hrtimers 2008-03-20 16:56:09 +02:00
Kconfig-nommu [ARM] 4532/1: allow configuration of processor ID 2007-10-12 23:43:02 +01:00
Kconfig.debug [ARM] CONFIG_DEBUG_STACK_USAGE 2008-01-26 14:50:06 +00:00
Makefile [ARM] 4853/1: include uImage target in make help 2008-03-08 15:53:47 +00:00