kernel_optimize_test/security/selinux/include/security.h

457 lines
13 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Security server interface.
*
* Author : Stephen Smalley, <sds@tycho.nsa.gov>
*
*/
#ifndef _SELINUX_SECURITY_H_
#define _SELINUX_SECURITY_H_
#include <linux/compiler.h>
#include <linux/dcache.h>
#include <linux/magic.h>
#include <linux/types.h>
#include <linux/rcupdate.h>
#include <linux/refcount.h>
#include <linux/workqueue.h>
#include "flask.h"
#include "policycap.h"
#define SECSID_NULL 0x00000000 /* unspecified SID */
#define SECSID_WILD 0xffffffff /* wildcard SID */
#define SECCLASS_NULL 0x0000 /* no class */
/* Identify specific policy version changes */
#define POLICYDB_VERSION_BASE 15
#define POLICYDB_VERSION_BOOL 16
#define POLICYDB_VERSION_IPV6 17
#define POLICYDB_VERSION_NLCLASS 18
#define POLICYDB_VERSION_VALIDATETRANS 19
#define POLICYDB_VERSION_MLS 19
#define POLICYDB_VERSION_AVTAB 20
#define POLICYDB_VERSION_RANGETRANS 21
#define POLICYDB_VERSION_POLCAP 22
#define POLICYDB_VERSION_PERMISSIVE 23
SELinux: add boundary support and thread context assignment The purpose of this patch is to assign per-thread security context under a constraint. It enables multi-threaded server application to kick a request handler with its fair security context, and helps some of userspace object managers to handle user's request. When we assign a per-thread security context, it must not have wider permissions than the original one. Because a multi-threaded process shares a single local memory, an arbitary per-thread security context also means another thread can easily refer violated information. The constraint on a per-thread security context requires a new domain has to be equal or weaker than its original one, when it tries to assign a per-thread security context. Bounds relationship between two types is a way to ensure a domain can never have wider permission than its bounds. We can define it in two explicit or implicit ways. The first way is using new TYPEBOUNDS statement. It enables to define a boundary of types explicitly. The other one expand the concept of existing named based hierarchy. If we defines a type with "." separated name like "httpd_t.php", toolchain implicitly set its bounds on "httpd_t". This feature requires a new policy version. The 24th version (POLICYDB_VERSION_BOUNDARY) enables to ship them into kernel space, and the following patch enables to handle it. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-28 15:35:57 +08:00
#define POLICYDB_VERSION_BOUNDARY 24
#define POLICYDB_VERSION_FILENAME_TRANS 25
#define POLICYDB_VERSION_ROLETRANS 26
SELinux: allow default source/target selectors for user/role/range When new objects are created we have great and flexible rules to determine the type of the new object. We aren't quite as flexible or mature when it comes to determining the user, role, and range. This patch adds a new ability to specify the place a new objects user, role, and range should come from. For users and roles it can come from either the source or the target of the operation. aka for files the user can either come from the source (the running process and todays default) or it can come from the target (aka the parent directory of the new file) examples always are done with directory context: system_u:object_r:mnt_t:s0-s0:c0.c512 process context: unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 [no rule] unconfined_u:object_r:mnt_t:s0 test_none [default user source] unconfined_u:object_r:mnt_t:s0 test_user_source [default user target] system_u:object_r:mnt_t:s0 test_user_target [default role source] unconfined_u:unconfined_r:mnt_t:s0 test_role_source [default role target] unconfined_u:object_r:mnt_t:s0 test_role_target [default range source low] unconfined_u:object_r:mnt_t:s0 test_range_source_low [default range source high] unconfined_u:object_r:mnt_t:s0:c0.c1023 test_range_source_high [default range source low-high] unconfined_u:object_r:mnt_t:s0-s0:c0.c1023 test_range_source_low-high [default range target low] unconfined_u:object_r:mnt_t:s0 test_range_target_low [default range target high] unconfined_u:object_r:mnt_t:s0:c0.c512 test_range_target_high [default range target low-high] unconfined_u:object_r:mnt_t:s0-s0:c0.c512 test_range_target_low-high Signed-off-by: Eric Paris <eparis@redhat.com>
2012-03-21 02:35:12 +08:00
#define POLICYDB_VERSION_NEW_OBJECT_DEFAULTS 27
#define POLICYDB_VERSION_DEFAULT_TYPE 28
#define POLICYDB_VERSION_CONSTRAINT_NAMES 29
selinux: extended permissions for ioctls Add extended permissions logic to selinux. Extended permissions provides additional permissions in 256 bit increments. Extend the generic ioctl permission check to use the extended permissions for per-command filtering. Source/target/class sets including the ioctl permission may additionally include a set of commands. Example: allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds Where unpriv_app_socket_cmds and priv_gpu_cmds are macros representing commonly granted sets of ioctl commands. When ioctl commands are omitted only the permissions are checked. This feature is intended to provide finer granularity for the ioctl permission that may be too imprecise. For example, the same driver may use ioctls to provide important and benign functionality such as driver version or socket type as well as dangerous capabilities such as debugging features, read/write/execute to physical memory or access to sensitive data. Per-command filtering provides a mechanism to reduce the attack surface of the kernel, and limit applications to the subset of commands required. The format of the policy binary has been modified to include ioctl commands, and the policy version number has been incremented to POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format change. The extended permissions logic is deliberately generic to allow components to be reused e.g. netlink filters Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-07-11 05:19:56 +08:00
#define POLICYDB_VERSION_XPERMS_IOCTL 30
#define POLICYDB_VERSION_INFINIBAND 31
#define POLICYDB_VERSION_GLBLUB 32
#define POLICYDB_VERSION_COMP_FTRANS 33 /* compressed filename transitions */
/* Range of policy versions we understand*/
#define POLICYDB_VERSION_MIN POLICYDB_VERSION_BASE
#define POLICYDB_VERSION_MAX POLICYDB_VERSION_COMP_FTRANS
/* Mask for just the mount related flags */
#define SE_MNTMASK 0x0f
/* Super block security struct flags for mount options */
/* BE CAREFUL, these need to be the low order bits for selinux_get_mnt_opts */
#define CONTEXT_MNT 0x01
#define FSCONTEXT_MNT 0x02
#define ROOTCONTEXT_MNT 0x04
#define DEFCONTEXT_MNT 0x08
#define SBLABEL_MNT 0x10
/* Non-mount related flags */
#define SE_SBINITIALIZED 0x0100
#define SE_SBPROC 0x0200
#define SE_SBGENFS 0x0400
#define SE_SBGENFS_XATTR 0x0800
#define CONTEXT_STR "context"
#define FSCONTEXT_STR "fscontext"
#define ROOTCONTEXT_STR "rootcontext"
#define DEFCONTEXT_STR "defcontext"
#define SECLABEL_STR "seclabel"
struct netlbl_lsm_secattr;
extern int selinux_enabled_boot;
SELinux: add boundary support and thread context assignment The purpose of this patch is to assign per-thread security context under a constraint. It enables multi-threaded server application to kick a request handler with its fair security context, and helps some of userspace object managers to handle user's request. When we assign a per-thread security context, it must not have wider permissions than the original one. Because a multi-threaded process shares a single local memory, an arbitary per-thread security context also means another thread can easily refer violated information. The constraint on a per-thread security context requires a new domain has to be equal or weaker than its original one, when it tries to assign a per-thread security context. Bounds relationship between two types is a way to ensure a domain can never have wider permission than its bounds. We can define it in two explicit or implicit ways. The first way is using new TYPEBOUNDS statement. It enables to define a boundary of types explicitly. The other one expand the concept of existing named based hierarchy. If we defines a type with "." separated name like "httpd_t.php", toolchain implicitly set its bounds on "httpd_t". This feature requires a new policy version. The 24th version (POLICYDB_VERSION_BOUNDARY) enables to ship them into kernel space, and the following patch enables to handle it. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-28 15:35:57 +08:00
/*
* type_datum properties
* available at the kernel policy version >= POLICYDB_VERSION_BOUNDARY
*/
#define TYPEDATUM_PROPERTY_PRIMARY 0x0001
#define TYPEDATUM_PROPERTY_ATTRIBUTE 0x0002
/* limitation of boundary depth */
#define POLICYDB_BOUNDS_MAXDEPTH 4
struct selinux_avc;
selinux: move policy commit after updating selinuxfs With the refactoring of the policy load logic in the security server from the previous change, it is now possible to split out the committing of the new policy from security_load_policy() and perform it only after successful updating of selinuxfs. Change security_load_policy() to return the newly populated policy data structures to the caller, export selinux_policy_commit() for external callers, and introduce selinux_policy_cancel() to provide a way to cancel the policy load in the event of an error during updating of the selinuxfs directory tree. Further, rework the interfaces used by selinuxfs to get information from the policy when creating the new directory tree to take and act upon the new policy data structure rather than the current/active policy. Update selinuxfs to use these updated and new interfaces. While we are here, stop re-creating the policy_capabilities directory on each policy load since it does not depend on the policy, and stop trying to create the booleans and classes directories during the initial creation of selinuxfs since no information is available until first policy load. After this change, a failure while updating the booleans and class directories will cause the entire policy load to be canceled, leaving the original policy intact, and policy load notifications to userspace will only happen after a successful completion of updating those directories. This does not (yet) provide full atomicity with respect to the updating of the directory trees themselves. Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-07 21:29:34 +08:00
struct selinux_policy;
struct selinux_state {
#ifdef CONFIG_SECURITY_SELINUX_DISABLE
bool disabled;
#endif
#ifdef CONFIG_SECURITY_SELINUX_DEVELOP
bool enforcing;
#endif
bool checkreqprot;
bool initialized;
bool policycap[__POLICYDB_CAPABILITY_MAX];
struct page *status_page;
struct mutex status_lock;
struct selinux_avc *avc;
struct selinux_policy __rcu *policy;
struct mutex policy_mutex;
} __randomize_layout;
void selinux_avc_init(struct selinux_avc **avc);
extern struct selinux_state selinux_state;
static inline bool selinux_initialized(const struct selinux_state *state)
{
/* do a synchronized load to avoid race conditions */
return smp_load_acquire(&state->initialized);
}
static inline void selinux_mark_initialized(struct selinux_state *state)
{
/* do a synchronized write to avoid race conditions */
smp_store_release(&state->initialized, true);
}
#ifdef CONFIG_SECURITY_SELINUX_DEVELOP
static inline bool enforcing_enabled(struct selinux_state *state)
{
return READ_ONCE(state->enforcing);
}
static inline void enforcing_set(struct selinux_state *state, bool value)
{
WRITE_ONCE(state->enforcing, value);
}
#else
static inline bool enforcing_enabled(struct selinux_state *state)
{
return true;
}
static inline void enforcing_set(struct selinux_state *state, bool value)
{
}
#endif
static inline bool checkreqprot_get(const struct selinux_state *state)
{
return READ_ONCE(state->checkreqprot);
}
static inline void checkreqprot_set(struct selinux_state *state, bool value)
{
WRITE_ONCE(state->checkreqprot, value);
}
#ifdef CONFIG_SECURITY_SELINUX_DISABLE
static inline bool selinux_disabled(struct selinux_state *state)
{
return READ_ONCE(state->disabled);
}
static inline void selinux_mark_disabled(struct selinux_state *state)
{
WRITE_ONCE(state->disabled, true);
}
#else
static inline bool selinux_disabled(struct selinux_state *state)
{
return false;
}
#endif
static inline bool selinux_policycap_netpeer(void)
{
struct selinux_state *state = &selinux_state;
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_NETPEER]);
}
static inline bool selinux_policycap_openperm(void)
{
struct selinux_state *state = &selinux_state;
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_OPENPERM]);
}
static inline bool selinux_policycap_extsockclass(void)
{
struct selinux_state *state = &selinux_state;
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_EXTSOCKCLASS]);
}
static inline bool selinux_policycap_alwaysnetwork(void)
{
struct selinux_state *state = &selinux_state;
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_ALWAYSNETWORK]);
}
static inline bool selinux_policycap_cgroupseclabel(void)
{
struct selinux_state *state = &selinux_state;
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_CGROUPSECLABEL]);
}
static inline bool selinux_policycap_nnp_nosuid_transition(void)
{
struct selinux_state *state = &selinux_state;
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_NNP_NOSUID_TRANSITION]);
}
static inline bool selinux_policycap_genfs_seclabel_symlinks(void)
{
struct selinux_state *state = &selinux_state;
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_GENFS_SECLABEL_SYMLINKS]);
}
selinux: fix variable scope issue in live sidtab conversion commit 6406887a12ee5dcdaffff1a8508d91113d545559 upstream. Commit 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") moved the selinux_policy_commit() call out of security_load_policy() into sel_write_load(), which caused a subtle yet rather serious bug. The problem is that security_load_policy() passes a reference to the convert_params local variable to sidtab_convert(), which stores it in the sidtab, where it may be accessed until the policy is swapped over and RCU synchronized. Before 02a52c5c8c3b, selinux_policy_commit() was called directly from security_load_policy(), so the convert_params pointer remained valid all the way until the old sidtab was destroyed, but now that's no longer the case and calls to sidtab_context_to_sid() on the old sidtab after security_load_policy() returns may cause invalid memory accesses. This can be easily triggered using the stress test from commit ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance"): ``` function rand_cat() { echo $(( $RANDOM % 1024 )) } function do_work() { while true; do echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \ >/sys/fs/selinux/context 2>/dev/null || true done } do_work >/dev/null & do_work >/dev/null & do_work >/dev/null & while load_policy; do echo -n .; sleep 0.1; done kill %1 kill %2 kill %3 ``` Fix this by allocating the temporary sidtab convert structures dynamically and passing them among the selinux_policy_{load,cancel,commit} functions. Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") Cc: stable@vger.kernel.org Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [PM: merge fuzz in security.h and services.c] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-19 05:53:02 +08:00
struct selinux_policy_convert_data;
struct selinux_load_state {
struct selinux_policy *policy;
struct selinux_policy_convert_data *convert_data;
};
int security_mls_enabled(struct selinux_state *state);
int security_load_policy(struct selinux_state *state,
selinux: fix variable scope issue in live sidtab conversion commit 6406887a12ee5dcdaffff1a8508d91113d545559 upstream. Commit 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") moved the selinux_policy_commit() call out of security_load_policy() into sel_write_load(), which caused a subtle yet rather serious bug. The problem is that security_load_policy() passes a reference to the convert_params local variable to sidtab_convert(), which stores it in the sidtab, where it may be accessed until the policy is swapped over and RCU synchronized. Before 02a52c5c8c3b, selinux_policy_commit() was called directly from security_load_policy(), so the convert_params pointer remained valid all the way until the old sidtab was destroyed, but now that's no longer the case and calls to sidtab_context_to_sid() on the old sidtab after security_load_policy() returns may cause invalid memory accesses. This can be easily triggered using the stress test from commit ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance"): ``` function rand_cat() { echo $(( $RANDOM % 1024 )) } function do_work() { while true; do echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \ >/sys/fs/selinux/context 2>/dev/null || true done } do_work >/dev/null & do_work >/dev/null & do_work >/dev/null & while load_policy; do echo -n .; sleep 0.1; done kill %1 kill %2 kill %3 ``` Fix this by allocating the temporary sidtab convert structures dynamically and passing them among the selinux_policy_{load,cancel,commit} functions. Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") Cc: stable@vger.kernel.org Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [PM: merge fuzz in security.h and services.c] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-19 05:53:02 +08:00
void *data, size_t len,
struct selinux_load_state *load_state);
selinux: move policy commit after updating selinuxfs With the refactoring of the policy load logic in the security server from the previous change, it is now possible to split out the committing of the new policy from security_load_policy() and perform it only after successful updating of selinuxfs. Change security_load_policy() to return the newly populated policy data structures to the caller, export selinux_policy_commit() for external callers, and introduce selinux_policy_cancel() to provide a way to cancel the policy load in the event of an error during updating of the selinuxfs directory tree. Further, rework the interfaces used by selinuxfs to get information from the policy when creating the new directory tree to take and act upon the new policy data structure rather than the current/active policy. Update selinuxfs to use these updated and new interfaces. While we are here, stop re-creating the policy_capabilities directory on each policy load since it does not depend on the policy, and stop trying to create the booleans and classes directories during the initial creation of selinuxfs since no information is available until first policy load. After this change, a failure while updating the booleans and class directories will cause the entire policy load to be canceled, leaving the original policy intact, and policy load notifications to userspace will only happen after a successful completion of updating those directories. This does not (yet) provide full atomicity with respect to the updating of the directory trees themselves. Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-07 21:29:34 +08:00
void selinux_policy_commit(struct selinux_state *state,
selinux: fix variable scope issue in live sidtab conversion commit 6406887a12ee5dcdaffff1a8508d91113d545559 upstream. Commit 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") moved the selinux_policy_commit() call out of security_load_policy() into sel_write_load(), which caused a subtle yet rather serious bug. The problem is that security_load_policy() passes a reference to the convert_params local variable to sidtab_convert(), which stores it in the sidtab, where it may be accessed until the policy is swapped over and RCU synchronized. Before 02a52c5c8c3b, selinux_policy_commit() was called directly from security_load_policy(), so the convert_params pointer remained valid all the way until the old sidtab was destroyed, but now that's no longer the case and calls to sidtab_context_to_sid() on the old sidtab after security_load_policy() returns may cause invalid memory accesses. This can be easily triggered using the stress test from commit ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance"): ``` function rand_cat() { echo $(( $RANDOM % 1024 )) } function do_work() { while true; do echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \ >/sys/fs/selinux/context 2>/dev/null || true done } do_work >/dev/null & do_work >/dev/null & do_work >/dev/null & while load_policy; do echo -n .; sleep 0.1; done kill %1 kill %2 kill %3 ``` Fix this by allocating the temporary sidtab convert structures dynamically and passing them among the selinux_policy_{load,cancel,commit} functions. Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") Cc: stable@vger.kernel.org Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [PM: merge fuzz in security.h and services.c] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-19 05:53:02 +08:00
struct selinux_load_state *load_state);
selinux: move policy commit after updating selinuxfs With the refactoring of the policy load logic in the security server from the previous change, it is now possible to split out the committing of the new policy from security_load_policy() and perform it only after successful updating of selinuxfs. Change security_load_policy() to return the newly populated policy data structures to the caller, export selinux_policy_commit() for external callers, and introduce selinux_policy_cancel() to provide a way to cancel the policy load in the event of an error during updating of the selinuxfs directory tree. Further, rework the interfaces used by selinuxfs to get information from the policy when creating the new directory tree to take and act upon the new policy data structure rather than the current/active policy. Update selinuxfs to use these updated and new interfaces. While we are here, stop re-creating the policy_capabilities directory on each policy load since it does not depend on the policy, and stop trying to create the booleans and classes directories during the initial creation of selinuxfs since no information is available until first policy load. After this change, a failure while updating the booleans and class directories will cause the entire policy load to be canceled, leaving the original policy intact, and policy load notifications to userspace will only happen after a successful completion of updating those directories. This does not (yet) provide full atomicity with respect to the updating of the directory trees themselves. Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-07 21:29:34 +08:00
void selinux_policy_cancel(struct selinux_state *state,
selinux: fix variable scope issue in live sidtab conversion commit 6406887a12ee5dcdaffff1a8508d91113d545559 upstream. Commit 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") moved the selinux_policy_commit() call out of security_load_policy() into sel_write_load(), which caused a subtle yet rather serious bug. The problem is that security_load_policy() passes a reference to the convert_params local variable to sidtab_convert(), which stores it in the sidtab, where it may be accessed until the policy is swapped over and RCU synchronized. Before 02a52c5c8c3b, selinux_policy_commit() was called directly from security_load_policy(), so the convert_params pointer remained valid all the way until the old sidtab was destroyed, but now that's no longer the case and calls to sidtab_context_to_sid() on the old sidtab after security_load_policy() returns may cause invalid memory accesses. This can be easily triggered using the stress test from commit ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance"): ``` function rand_cat() { echo $(( $RANDOM % 1024 )) } function do_work() { while true; do echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \ >/sys/fs/selinux/context 2>/dev/null || true done } do_work >/dev/null & do_work >/dev/null & do_work >/dev/null & while load_policy; do echo -n .; sleep 0.1; done kill %1 kill %2 kill %3 ``` Fix this by allocating the temporary sidtab convert structures dynamically and passing them among the selinux_policy_{load,cancel,commit} functions. Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") Cc: stable@vger.kernel.org Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [PM: merge fuzz in security.h and services.c] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-19 05:53:02 +08:00
struct selinux_load_state *load_state);
int security_read_policy(struct selinux_state *state,
void **data, size_t *len);
int security_policycap_supported(struct selinux_state *state,
unsigned int req_cap);
#define SEL_VEC_MAX 32
struct av_decision {
u32 allowed;
u32 auditallow;
u32 auditdeny;
u32 seqno;
2009-04-01 09:07:57 +08:00
u32 flags;
};
selinux: extended permissions for ioctls Add extended permissions logic to selinux. Extended permissions provides additional permissions in 256 bit increments. Extend the generic ioctl permission check to use the extended permissions for per-command filtering. Source/target/class sets including the ioctl permission may additionally include a set of commands. Example: allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds Where unpriv_app_socket_cmds and priv_gpu_cmds are macros representing commonly granted sets of ioctl commands. When ioctl commands are omitted only the permissions are checked. This feature is intended to provide finer granularity for the ioctl permission that may be too imprecise. For example, the same driver may use ioctls to provide important and benign functionality such as driver version or socket type as well as dangerous capabilities such as debugging features, read/write/execute to physical memory or access to sensitive data. Per-command filtering provides a mechanism to reduce the attack surface of the kernel, and limit applications to the subset of commands required. The format of the policy binary has been modified to include ioctl commands, and the policy version number has been incremented to POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format change. The extended permissions logic is deliberately generic to allow components to be reused e.g. netlink filters Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-07-11 05:19:56 +08:00
#define XPERMS_ALLOWED 1
#define XPERMS_AUDITALLOW 2
#define XPERMS_DONTAUDIT 4
#define security_xperm_set(perms, x) (perms[x >> 5] |= 1 << (x & 0x1f))
#define security_xperm_test(perms, x) (1 & (perms[x >> 5] >> (x & 0x1f)))
struct extended_perms_data {
u32 p[8];
};
struct extended_perms_decision {
u8 used;
u8 driver;
struct extended_perms_data *allowed;
struct extended_perms_data *auditallow;
struct extended_perms_data *dontaudit;
};
struct extended_perms {
u16 len; /* length associated decision chain */
struct extended_perms_data drivers; /* flag drivers that are used */
};
2009-04-01 09:07:57 +08:00
/* definitions of av_decision.flags */
#define AVD_FLAGS_PERMISSIVE 0x0001
void security_compute_av(struct selinux_state *state,
u32 ssid, u32 tsid,
selinux: extended permissions for ioctls Add extended permissions logic to selinux. Extended permissions provides additional permissions in 256 bit increments. Extend the generic ioctl permission check to use the extended permissions for per-command filtering. Source/target/class sets including the ioctl permission may additionally include a set of commands. Example: allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds Where unpriv_app_socket_cmds and priv_gpu_cmds are macros representing commonly granted sets of ioctl commands. When ioctl commands are omitted only the permissions are checked. This feature is intended to provide finer granularity for the ioctl permission that may be too imprecise. For example, the same driver may use ioctls to provide important and benign functionality such as driver version or socket type as well as dangerous capabilities such as debugging features, read/write/execute to physical memory or access to sensitive data. Per-command filtering provides a mechanism to reduce the attack surface of the kernel, and limit applications to the subset of commands required. The format of the policy binary has been modified to include ioctl commands, and the policy version number has been incremented to POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format change. The extended permissions logic is deliberately generic to allow components to be reused e.g. netlink filters Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-07-11 05:19:56 +08:00
u16 tclass, struct av_decision *avd,
struct extended_perms *xperms);
void security_compute_xperms_decision(struct selinux_state *state,
u32 ssid, u32 tsid, u16 tclass,
u8 driver,
struct extended_perms_decision *xpermd);
selinux: dynamic class/perm discovery Modify SELinux to dynamically discover class and permission values upon policy load, based on the dynamic object class/perm discovery logic from libselinux. A mapping is created between kernel-private class and permission indices used outside the security server and the policy values used within the security server. The mappings are only applied upon kernel-internal computations; similar mappings for the private indices of userspace object managers is handled on a per-object manager basis by the userspace AVC. The interfaces for compute_av and transition_sid are split for kernel vs. userspace; the userspace functions are distinguished by a _user suffix. The kernel-private class indices are no longer tied to the policy values and thus do not need to skip indices for userspace classes; thus the kernel class index values are compressed. The flask.h definitions were regenerated by deleting the userspace classes from refpolicy's definitions and then regenerating the headers. Going forward, we can just maintain the flask.h, av_permissions.h, and classmap.h definitions separately from policy as they are no longer tied to the policy values. The next patch introduces a utility to automate generation of flask.h and av_permissions.h from the classmap.h definitions. The older kernel class and permission string tables are removed and replaced by a single security class mapping table that is walked at policy load to generate the mapping. The old kernel class validation logic is completely replaced by the mapping logic. The handle unknown logic is reworked. reject_unknown=1 is handled when the mappings are computed at policy load time, similar to the old handling by the class validation logic. allow_unknown=1 is handled when computing and mapping decisions - if the permission was not able to be mapped (i.e. undefined, mapped to zero), then it is automatically added to the allowed vector. If the class was not able to be mapped (i.e. undefined, mapped to zero), then all permissions are allowed for it if allow_unknown=1. avc_audit leverages the new security class mapping table to lookup the class and permission names from the kernel-private indices. The mdp program is updated to use the new table when generating the class definitions and allow rules for a minimal boot policy for the kernel. It should be noted that this policy will not include any userspace classes, nor will its policy index values for the kernel classes correspond with the ones in refpolicy (they will instead match the kernel-private indices). Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-10-01 01:37:50 +08:00
void security_compute_av_user(struct selinux_state *state,
u32 ssid, u32 tsid,
u16 tclass, struct av_decision *avd);
int security_transition_sid(struct selinux_state *state,
u32 ssid, u32 tsid, u16 tclass,
const struct qstr *qstr, u32 *out_sid);
selinux: dynamic class/perm discovery Modify SELinux to dynamically discover class and permission values upon policy load, based on the dynamic object class/perm discovery logic from libselinux. A mapping is created between kernel-private class and permission indices used outside the security server and the policy values used within the security server. The mappings are only applied upon kernel-internal computations; similar mappings for the private indices of userspace object managers is handled on a per-object manager basis by the userspace AVC. The interfaces for compute_av and transition_sid are split for kernel vs. userspace; the userspace functions are distinguished by a _user suffix. The kernel-private class indices are no longer tied to the policy values and thus do not need to skip indices for userspace classes; thus the kernel class index values are compressed. The flask.h definitions were regenerated by deleting the userspace classes from refpolicy's definitions and then regenerating the headers. Going forward, we can just maintain the flask.h, av_permissions.h, and classmap.h definitions separately from policy as they are no longer tied to the policy values. The next patch introduces a utility to automate generation of flask.h and av_permissions.h from the classmap.h definitions. The older kernel class and permission string tables are removed and replaced by a single security class mapping table that is walked at policy load to generate the mapping. The old kernel class validation logic is completely replaced by the mapping logic. The handle unknown logic is reworked. reject_unknown=1 is handled when the mappings are computed at policy load time, similar to the old handling by the class validation logic. allow_unknown=1 is handled when computing and mapping decisions - if the permission was not able to be mapped (i.e. undefined, mapped to zero), then it is automatically added to the allowed vector. If the class was not able to be mapped (i.e. undefined, mapped to zero), then all permissions are allowed for it if allow_unknown=1. avc_audit leverages the new security class mapping table to lookup the class and permission names from the kernel-private indices. The mdp program is updated to use the new table when generating the class definitions and allow rules for a minimal boot policy for the kernel. It should be noted that this policy will not include any userspace classes, nor will its policy index values for the kernel classes correspond with the ones in refpolicy (they will instead match the kernel-private indices). Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-10-01 01:37:50 +08:00
int security_transition_sid_user(struct selinux_state *state,
u32 ssid, u32 tsid, u16 tclass,
const char *objname, u32 *out_sid);
int security_member_sid(struct selinux_state *state, u32 ssid, u32 tsid,
u16 tclass, u32 *out_sid);
int security_change_sid(struct selinux_state *state, u32 ssid, u32 tsid,
u16 tclass, u32 *out_sid);
int security_sid_to_context(struct selinux_state *state, u32 sid,
char **scontext, u32 *scontext_len);
int security_sid_to_context_force(struct selinux_state *state,
u32 sid, char **scontext, u32 *scontext_len);
selinux: support deferred mapping of contexts Introduce SELinux support for deferred mapping of security contexts in the SID table upon policy reload, and use this support for inode security contexts when the context is not yet valid under the current policy. Only processes with CAP_MAC_ADMIN + mac_admin permission in policy can set undefined security contexts on inodes. Inodes with such undefined contexts are treated as having the unlabeled context until the context becomes valid upon a policy reload that defines the context. Context invalidation upon policy reload also uses this support to save the context information in the SID table and later recover it upon a subsequent policy reload that defines the context again. This support is to enable package managers and similar programs to set down file contexts unknown to the system policy at the time the file is created in order to better support placing loadable policy modules in packages and to support build systems that need to create images of different distro releases with different policies w/o requiring all of the contexts to be defined or legal in the build host policy. With this patch applied, the following sequence is possible, although in practice it is recommended that this permission only be allowed to specific program domains such as the package manager. # rmdir baz # rm bar # touch bar # chcon -t foo_exec_t bar # foo_exec_t is not yet defined chcon: failed to change context of `bar' to `system_u:object_r:foo_exec_t': Invalid argument # mkdir -Z system_u:object_r:foo_exec_t baz mkdir: failed to set default file creation context to `system_u:object_r:foo_exec_t': Invalid argument # cat setundefined.te policy_module(setundefined, 1.0) require { type unconfined_t; type unlabeled_t; } files_type(unlabeled_t) allow unconfined_t self:capability2 mac_admin; # make -f /usr/share/selinux/devel/Makefile setundefined.pp # semodule -i setundefined.pp # chcon -t foo_exec_t bar # foo_exec_t is not yet defined # mkdir -Z system_u:object_r:foo_exec_t baz # ls -Zd bar baz -rw-r--r-- root root system_u:object_r:unlabeled_t bar drwxr-xr-x root root system_u:object_r:unlabeled_t baz # cat foo.te policy_module(foo, 1.0) type foo_exec_t; files_type(foo_exec_t) # make -f /usr/share/selinux/devel/Makefile foo.pp # semodule -i foo.pp # defines foo_exec_t # ls -Zd bar baz -rw-r--r-- root root user_u:object_r:foo_exec_t bar drwxr-xr-x root root system_u:object_r:foo_exec_t baz # semodule -r foo # ls -Zd bar baz -rw-r--r-- root root system_u:object_r:unlabeled_t bar drwxr-xr-x root root system_u:object_r:unlabeled_t baz # semodule -i foo.pp # ls -Zd bar baz -rw-r--r-- root root user_u:object_r:foo_exec_t bar drwxr-xr-x root root system_u:object_r:foo_exec_t baz # semodule -r setundefined foo # chcon -t foo_exec_t bar # no longer defined and not allowed chcon: failed to change context of `bar' to `system_u:object_r:foo_exec_t': Invalid argument # rmdir baz # mkdir -Z system_u:object_r:foo_exec_t baz mkdir: failed to set default file creation context to `system_u:object_r:foo_exec_t': Invalid argument Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-05-08 01:03:20 +08:00
selinux: log invalid contexts in AVCs In case a file has an invalid context set, in an AVC record generated upon access to such file, the target context is always reported as unlabeled. This patch adds new optional fields to the AVC record (srawcon and trawcon) that report the actual context string if it differs from the one reported in scontext/tcontext. This is useful for diagnosing SELinux denials involving invalid contexts. To trigger an AVC that illustrates this situation: # setenforce 0 # touch /tmp/testfile # setfattr -n security.selinux -v system_u:object_r:banana_t:s0 /tmp/testfile # runcon system_u:system_r:sshd_t:s0 cat /tmp/testfile AVC before: type=AVC msg=audit(1547801083.248:11): avc: denied { open } for pid=1149 comm="cat" path="/tmp/testfile" dev="tmpfs" ino=6608 scontext=system_u:system_r:sshd_t:s0 tcontext=system_u:object_r:unlabeled_t:s15:c0.c1023 tclass=file permissive=1 AVC after: type=AVC msg=audit(1547801083.248:11): avc: denied { open } for pid=1149 comm="cat" path="/tmp/testfile" dev="tmpfs" ino=6608 scontext=system_u:system_r:sshd_t:s0 tcontext=system_u:object_r:unlabeled_t:s15:c0.c1023 tclass=file permissive=1 trawcon=system_u:object_r:banana_t:s0 Note that it is also possible to encounter this situation with the 'scontext' field - e.g. when a new policy is loaded while a process is running, whose context is not valid in the new policy. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1135683 Cc: Daniel Walsh <dwalsh@redhat.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-01-25 18:06:51 +08:00
int security_sid_to_context_inval(struct selinux_state *state,
u32 sid, char **scontext, u32 *scontext_len);
int security_context_to_sid(struct selinux_state *state,
const char *scontext, u32 scontext_len,
selinux: add gfp argument to security_xfrm_policy_alloc and fix callers security_xfrm_policy_alloc can be called in atomic context so the allocation should be done with GFP_ATOMIC. Add an argument to let the callers choose the appropriate way. In order to do so a gfp argument needs to be added to the method xfrm_policy_alloc_security in struct security_operations and to the internal function selinux_xfrm_alloc_user. After that switch to GFP_ATOMIC in the atomic callers and leave GFP_KERNEL as before for the rest. The path that needed the gfp argument addition is: security_xfrm_policy_alloc -> security_ops.xfrm_policy_alloc_security -> all users of xfrm_policy_alloc_security (e.g. selinux_xfrm_policy_alloc) -> selinux_xfrm_alloc_user (here the allocation used to be GFP_KERNEL only) Now adding a gfp argument to selinux_xfrm_alloc_user requires us to also add it to security_context_to_sid which is used inside and prior to this patch did only GFP_KERNEL allocation. So add gfp argument to security_context_to_sid and adjust all of its callers as well. CC: Paul Moore <paul@paul-moore.com> CC: Dave Jones <davej@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Fan Du <fan.du@windriver.com> CC: David S. Miller <davem@davemloft.net> CC: LSM list <linux-security-module@vger.kernel.org> CC: SELinux list <selinux@tycho.nsa.gov> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-03-07 19:44:19 +08:00
u32 *out_sid, gfp_t gfp);
int security_context_str_to_sid(struct selinux_state *state,
const char *scontext, u32 *out_sid, gfp_t gfp);
int security_context_to_sid_default(struct selinux_state *state,
const char *scontext, u32 scontext_len,
u32 *out_sid, u32 def_sid, gfp_t gfp_flags);
int security_context_to_sid_force(struct selinux_state *state,
const char *scontext, u32 scontext_len,
selinux: support deferred mapping of contexts Introduce SELinux support for deferred mapping of security contexts in the SID table upon policy reload, and use this support for inode security contexts when the context is not yet valid under the current policy. Only processes with CAP_MAC_ADMIN + mac_admin permission in policy can set undefined security contexts on inodes. Inodes with such undefined contexts are treated as having the unlabeled context until the context becomes valid upon a policy reload that defines the context. Context invalidation upon policy reload also uses this support to save the context information in the SID table and later recover it upon a subsequent policy reload that defines the context again. This support is to enable package managers and similar programs to set down file contexts unknown to the system policy at the time the file is created in order to better support placing loadable policy modules in packages and to support build systems that need to create images of different distro releases with different policies w/o requiring all of the contexts to be defined or legal in the build host policy. With this patch applied, the following sequence is possible, although in practice it is recommended that this permission only be allowed to specific program domains such as the package manager. # rmdir baz # rm bar # touch bar # chcon -t foo_exec_t bar # foo_exec_t is not yet defined chcon: failed to change context of `bar' to `system_u:object_r:foo_exec_t': Invalid argument # mkdir -Z system_u:object_r:foo_exec_t baz mkdir: failed to set default file creation context to `system_u:object_r:foo_exec_t': Invalid argument # cat setundefined.te policy_module(setundefined, 1.0) require { type unconfined_t; type unlabeled_t; } files_type(unlabeled_t) allow unconfined_t self:capability2 mac_admin; # make -f /usr/share/selinux/devel/Makefile setundefined.pp # semodule -i setundefined.pp # chcon -t foo_exec_t bar # foo_exec_t is not yet defined # mkdir -Z system_u:object_r:foo_exec_t baz # ls -Zd bar baz -rw-r--r-- root root system_u:object_r:unlabeled_t bar drwxr-xr-x root root system_u:object_r:unlabeled_t baz # cat foo.te policy_module(foo, 1.0) type foo_exec_t; files_type(foo_exec_t) # make -f /usr/share/selinux/devel/Makefile foo.pp # semodule -i foo.pp # defines foo_exec_t # ls -Zd bar baz -rw-r--r-- root root user_u:object_r:foo_exec_t bar drwxr-xr-x root root system_u:object_r:foo_exec_t baz # semodule -r foo # ls -Zd bar baz -rw-r--r-- root root system_u:object_r:unlabeled_t bar drwxr-xr-x root root system_u:object_r:unlabeled_t baz # semodule -i foo.pp # ls -Zd bar baz -rw-r--r-- root root user_u:object_r:foo_exec_t bar drwxr-xr-x root root system_u:object_r:foo_exec_t baz # semodule -r setundefined foo # chcon -t foo_exec_t bar # no longer defined and not allowed chcon: failed to change context of `bar' to `system_u:object_r:foo_exec_t': Invalid argument # rmdir baz # mkdir -Z system_u:object_r:foo_exec_t baz mkdir: failed to set default file creation context to `system_u:object_r:foo_exec_t': Invalid argument Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-05-08 01:03:20 +08:00
u32 *sid);
int security_get_user_sids(struct selinux_state *state,
u32 callsid, char *username,
u32 **sids, u32 *nel);
int security_port_sid(struct selinux_state *state,
u8 protocol, u16 port, u32 *out_sid);
int security_ib_pkey_sid(struct selinux_state *state,
u64 subnet_prefix, u16 pkey_num, u32 *out_sid);
int security_ib_endport_sid(struct selinux_state *state,
const char *dev_name, u8 port_num, u32 *out_sid);
int security_netif_sid(struct selinux_state *state,
char *name, u32 *if_sid);
int security_node_sid(struct selinux_state *state,
u16 domain, void *addr, u32 addrlen,
u32 *out_sid);
int security_validate_transition(struct selinux_state *state,
u32 oldsid, u32 newsid, u32 tasksid,
u16 tclass);
int security_validate_transition_user(struct selinux_state *state,
u32 oldsid, u32 newsid, u32 tasksid,
u16 tclass);
int security_bounded_transition(struct selinux_state *state,
u32 oldsid, u32 newsid);
SELinux: add boundary support and thread context assignment The purpose of this patch is to assign per-thread security context under a constraint. It enables multi-threaded server application to kick a request handler with its fair security context, and helps some of userspace object managers to handle user's request. When we assign a per-thread security context, it must not have wider permissions than the original one. Because a multi-threaded process shares a single local memory, an arbitary per-thread security context also means another thread can easily refer violated information. The constraint on a per-thread security context requires a new domain has to be equal or weaker than its original one, when it tries to assign a per-thread security context. Bounds relationship between two types is a way to ensure a domain can never have wider permission than its bounds. We can define it in two explicit or implicit ways. The first way is using new TYPEBOUNDS statement. It enables to define a boundary of types explicitly. The other one expand the concept of existing named based hierarchy. If we defines a type with "." separated name like "httpd_t.php", toolchain implicitly set its bounds on "httpd_t". This feature requires a new policy version. The 24th version (POLICYDB_VERSION_BOUNDARY) enables to ship them into kernel space, and the following patch enables to handle it. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-28 15:35:57 +08:00
int security_sid_mls_copy(struct selinux_state *state,
u32 sid, u32 mls_sid, u32 *new_sid);
int security_net_peersid_resolve(struct selinux_state *state,
u32 nlbl_sid, u32 nlbl_type,
u32 xfrm_sid,
u32 *peer_sid);
selinux: move policy commit after updating selinuxfs With the refactoring of the policy load logic in the security server from the previous change, it is now possible to split out the committing of the new policy from security_load_policy() and perform it only after successful updating of selinuxfs. Change security_load_policy() to return the newly populated policy data structures to the caller, export selinux_policy_commit() for external callers, and introduce selinux_policy_cancel() to provide a way to cancel the policy load in the event of an error during updating of the selinuxfs directory tree. Further, rework the interfaces used by selinuxfs to get information from the policy when creating the new directory tree to take and act upon the new policy data structure rather than the current/active policy. Update selinuxfs to use these updated and new interfaces. While we are here, stop re-creating the policy_capabilities directory on each policy load since it does not depend on the policy, and stop trying to create the booleans and classes directories during the initial creation of selinuxfs since no information is available until first policy load. After this change, a failure while updating the booleans and class directories will cause the entire policy load to be canceled, leaving the original policy intact, and policy load notifications to userspace will only happen after a successful completion of updating those directories. This does not (yet) provide full atomicity with respect to the updating of the directory trees themselves. Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-07 21:29:34 +08:00
int security_get_classes(struct selinux_policy *policy,
char ***classes, int *nclasses);
selinux: move policy commit after updating selinuxfs With the refactoring of the policy load logic in the security server from the previous change, it is now possible to split out the committing of the new policy from security_load_policy() and perform it only after successful updating of selinuxfs. Change security_load_policy() to return the newly populated policy data structures to the caller, export selinux_policy_commit() for external callers, and introduce selinux_policy_cancel() to provide a way to cancel the policy load in the event of an error during updating of the selinuxfs directory tree. Further, rework the interfaces used by selinuxfs to get information from the policy when creating the new directory tree to take and act upon the new policy data structure rather than the current/active policy. Update selinuxfs to use these updated and new interfaces. While we are here, stop re-creating the policy_capabilities directory on each policy load since it does not depend on the policy, and stop trying to create the booleans and classes directories during the initial creation of selinuxfs since no information is available until first policy load. After this change, a failure while updating the booleans and class directories will cause the entire policy load to be canceled, leaving the original policy intact, and policy load notifications to userspace will only happen after a successful completion of updating those directories. This does not (yet) provide full atomicity with respect to the updating of the directory trees themselves. Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-07 21:29:34 +08:00
int security_get_permissions(struct selinux_policy *policy,
char *class, char ***perms, int *nperms);
int security_get_reject_unknown(struct selinux_state *state);
int security_get_allow_unknown(struct selinux_state *state);
#define SECURITY_FS_USE_XATTR 1 /* use xattr */
#define SECURITY_FS_USE_TRANS 2 /* use transition SIDs, e.g. devpts/tmpfs */
#define SECURITY_FS_USE_TASK 3 /* use task SIDs, e.g. pipefs/sockfs */
#define SECURITY_FS_USE_GENFS 4 /* use the genfs support */
#define SECURITY_FS_USE_NONE 5 /* no labeling support */
#define SECURITY_FS_USE_MNTPOINT 6 /* use mountpoint labeling */
#define SECURITY_FS_USE_NATIVE 7 /* use native label support */
#define SECURITY_FS_USE_MAX 7 /* Highest SECURITY_FS_USE_XXX */
int security_fs_use(struct selinux_state *state, struct super_block *sb);
int security_genfs_sid(struct selinux_state *state,
const char *fstype, char *name, u16 sclass,
selinux: move policy commit after updating selinuxfs With the refactoring of the policy load logic in the security server from the previous change, it is now possible to split out the committing of the new policy from security_load_policy() and perform it only after successful updating of selinuxfs. Change security_load_policy() to return the newly populated policy data structures to the caller, export selinux_policy_commit() for external callers, and introduce selinux_policy_cancel() to provide a way to cancel the policy load in the event of an error during updating of the selinuxfs directory tree. Further, rework the interfaces used by selinuxfs to get information from the policy when creating the new directory tree to take and act upon the new policy data structure rather than the current/active policy. Update selinuxfs to use these updated and new interfaces. While we are here, stop re-creating the policy_capabilities directory on each policy load since it does not depend on the policy, and stop trying to create the booleans and classes directories during the initial creation of selinuxfs since no information is available until first policy load. After this change, a failure while updating the booleans and class directories will cause the entire policy load to be canceled, leaving the original policy intact, and policy load notifications to userspace will only happen after a successful completion of updating those directories. This does not (yet) provide full atomicity with respect to the updating of the directory trees themselves. Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-07 21:29:34 +08:00
u32 *sid);
int selinux_policy_genfs_sid(struct selinux_policy *policy,
const char *fstype, char *name, u16 sclass,
u32 *sid);
#ifdef CONFIG_NETLABEL
int security_netlbl_secattr_to_sid(struct selinux_state *state,
struct netlbl_lsm_secattr *secattr,
u32 *sid);
int security_netlbl_sid_to_secattr(struct selinux_state *state,
u32 sid,
struct netlbl_lsm_secattr *secattr);
#else
static inline int security_netlbl_secattr_to_sid(struct selinux_state *state,
struct netlbl_lsm_secattr *secattr,
u32 *sid)
{
return -EIDRM;
}
static inline int security_netlbl_sid_to_secattr(struct selinux_state *state,
u32 sid,
struct netlbl_lsm_secattr *secattr)
{
return -ENOENT;
}
#endif /* CONFIG_NETLABEL */
const char *security_get_initial_sid_context(u32 sid);
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
/*
* status notifier using mmap interface
*/
extern struct page *selinux_kernel_status_page(struct selinux_state *state);
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
#define SELINUX_KERNEL_STATUS_VERSION 1
struct selinux_kernel_status {
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
u32 version; /* version number of thie structure */
u32 sequence; /* sequence number of seqlock logic */
u32 enforcing; /* current setting of enforcing mode */
u32 policyload; /* times of policy reloaded */
u32 deny_unknown; /* current setting of deny_unknown */
/*
* The version > 0 supports above members.
*/
} __packed;
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
extern void selinux_status_update_setenforce(struct selinux_state *state,
int enforcing);
extern void selinux_status_update_policyload(struct selinux_state *state,
int seqno);
extern void selinux_complete_init(void);
extern int selinux_disable(struct selinux_state *state);
extern void exit_sel_fs(void);
extern struct path selinux_null;
extern struct vfsmount *selinuxfs_mount;
extern void selnl_notify_setenforce(int val);
extern void selnl_notify_policyload(u32 seqno);
extern int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm);
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
extern void avtab_cache_init(void);
extern void ebitmap_cache_init(void);
extern void hashtab_cache_init(void);
selinux: sidtab reverse lookup hash table This replaces the reverse table lookup and reverse cache with a hashtable which improves cache-miss reverse-lookup times from O(n) to O(1)* and maintains the same performance as a reverse cache hit. This reduces the time needed to add a new sidtab entry from ~500us to 5us on a Pixel 3 when there are ~10,000 sidtab entries. The implementation uses the kernel's generic hashtable API, It uses the context's string represtation as the hash source, and the kernels generic string hashing algorithm full_name_hash() to reduce the string to a 32 bit value. This change also maintains the improvement introduced in commit ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance") which removed the need to keep the current sidtab locked during policy reload. It does however introduce periodic locking of the target sidtab while converting the hashtable. Sidtab entries are never modified or removed, so the context struct stored in the sid_to_context tree can also be used for the context_to_sid hashtable to reduce memory usage. This bug was reported by: - On the selinux bug tracker. BUG: kernel softlockup due to too many SIDs/contexts #37 https://github.com/SELinuxProject/selinux-kernel/issues/37 - Jovana Knezevic on Android's bugtracker. Bug: 140252993 "During multi-user performance testing, we create and remove users many times. selinux_android_restorecon_pkgdir goes from 1ms to over 20ms after about 200 user creations and removals. Accumulated over ~280 packages, that adds a significant time to user creation, making perf benchmarks unreliable." * Hashtable lookup is only O(1) when n < the number of buckets. Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Reported-by: Jovana Knezevic <jovanak@google.com> Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov> Tested-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: subj tweak, removed changelog from patch description] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-11-22 17:33:06 +08:00
extern int security_sidtab_hash_stats(struct selinux_state *state, char *page);
#endif /* _SELINUX_SECURITY_H_ */