phy: stm32: fix usbphyc static checker and checkpatch warnings

This patch fixes the following issues:
* warning reported by checkpatch:
WARNING: line over 80 characters
#87: FILE: drivers/phy/st/phy-stm32-usbphyc.c:87:
+static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params)

* bug reported by static checker (Dan Carpenter):
drivers/phy/st/phy-stm32-usbphyc.c:371 stm32_usbphyc_probe()
error: uninitialized symbol 'i'.

* unused stm32_usbphyc structure member: bool pll_enabled.

* unnecessary extra line in stm32_usbphyc_of_xlate

Fixes: 94c358da3a "phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)"
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Amelie Delaunay 2018-05-07 16:28:08 +02:00 committed by Kishon Vijay Abraham I
parent f7f50b2a7b
commit 52113be1c6

View File

@ -71,7 +71,6 @@ struct stm32_usbphyc {
struct stm32_usbphyc_phy **phys;
int nphys;
int switch_setup;
bool pll_enabled;
};
static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits)
@ -84,7 +83,8 @@ static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits)
writel_relaxed(readl_relaxed(reg) & ~bits, reg);
}
static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params)
static void stm32_usbphyc_get_pll_params(u32 clk_rate,
struct pll_params *pll_params)
{
unsigned long long fvco, ndiv, frac;
@ -271,7 +271,6 @@ static struct phy *stm32_usbphyc_of_xlate(struct device *dev,
struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev);
struct stm32_usbphyc_phy *usbphyc_phy = NULL;
struct device_node *phynode = args->np;
int port = 0;
for (port = 0; port < usbphyc->nphys; port++) {
@ -367,8 +366,8 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
if (ret != -EPROBE_DEFER)
dev_err(dev,
"failed to create phy%d: %d\n", i, ret);
dev_err(dev, "failed to create phy%d: %d\n",
port, ret);
goto put_child;
}