AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

ARM: SoC: late updates for v5.4

Browse Source 
This is some material that we picked up into our tree late or
 that had complex inter-depondencies. The fact that there are these
 interdependencies tends to meant that these are often actually the most
 interesting new additions:
 
 The new Aspeed AST2600 baseboard management controller is added, this
 is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
 dependencies on other device drivers.
 
 After many years, support for the MMP2 based OLPC XO-1.75 finally makes
 it into the kernel.
 
 The Armada 3720 based Turris Mox open source router platform is a late
 addition and it follows some preparatory work across multiple branches.
 
 The OMAP2+ platform had some large-scale cleanup involving driver
 changes and DT changes, here we finish it off, dropping a lot of the
 now-unused platform data.
 
 The TI K3 platform that got added for 5.3 gains a lot more support
 for individual bits on the SoC, this part just came late for the
 merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6P3AAoJEJpsee/mABjZMFUP/i/J9CNJjEec0cWCG1XgP/qh
 SpKFf2g9Y9QzqAzDDovo7atTGHTCG8C0fn8W+bkv9h7dWj2uxRtFISM9COomUoHa
 0qXUL9bbDB3LAvstLV451p4c67XsJUazV9KZPD7VsCquucWbDDYaGPz+0reSRm6y
 imK2jXqD0leG0CNbgRXfh64J32TF3M0/XnwbsNJreCmQvwUvkYLL5VNi/qcnvfyp
 k0g1/5OzH9mLertoVKWqJ9o1919Yvxdl6/eyDmTPmX08bs03WnPbCEzRVO/zkOKZ
 O6RcAlsjiLblQdfbDJKfbaYDDaE53d2NwdCvBIdSPmDoYM5eYjQC4PmDM0+0dmHe
 bFd9giBjzU2Uab7ylgeoVl6pX1ISk6bwmZxNup45cy0xyw8wuky02Wq2bQTuZbgI
 UcBlOGWR4aH/OCpNafn+ovDBYGc64I7EQobG7UiilrVq/libx1Uo7yjlWSxe4j8n
 wFchiB8It24WUiS4JhJFrTklkaf5JW3K3czdDATW7aZKjv+fnHU5GMre/hvNP4z7
 qROlP69/eqNXG25VOcwWPQE8yhP43+ZgyvoVwDh1H6VZdy9WxgYyEoiBAhFfcrng
 +RVAT4rzylPmKP8oygVF1fpTHTS8xHrYBbjkdRaj5KqmTDdqI/nMsYoq+E0R1ScV
 EsnyNVq7wnvH12zrOv+I
 =Qtkp
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Arnd Bergmann:
 "This is some material that we picked up into our tree late or that had
  complex inter-depondencies. The fact that there are these
  interdependencies tends to meant that these are often actually the
  most interesting new additions:

   - The new Aspeed AST2600 baseboard management controller is added,
     this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
     had some dependencies on other device drivers.

   - After many years, support for the MMP2 based OLPC XO-1.75 finally
     makes it into the kernel.

   - The Armada 3720 based Turris Mox open source router platform is a
     late addition and it follows some preparatory work across multiple
     branches.

   - The OMAP2+ platform had some large-scale cleanup involving driver
     changes and DT changes, here we finish it off, dropping a lot of
     the now-unused platform data.

   - The TI K3 platform that got added for 5.3 gains a lot more support
     for individual bits on the SoC, this part just came late for the
     merge window"

[ This pull request itself wasn't actually sent late at all by Arnd, but
  I waited on the branches that it used to be pulled first, so it ends
  up being merged much later than the other ARM SoC pull requests this
  merge window     - Linus ]

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  ARM: dts: dir685: Drop spi-cpol from the display
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  ARM: dts: mmp2: add OLPC XO 1.75 machine
  ARM: dts: mmp2: rename the USB PHY node
  ARM: dts: mmp2: specify reg-shift for the UARTs
  ARM: dts: mmp2: add camera interfaces
  ARM: dts: mmp2: fix the SPI nodes
  ARM: dts: mmp2: trivial whitespace fix
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  ...
This commit is contained in:
Linus Torvalds 2019-09-20 15:53:02 -07:00
commit f97c81dc6c
47 changed files with 3186 additions and 883 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
View File

@ -48,3 +48,11 @@ avs: avs@11500 {
compatible = "marvell,armada-3700-avs", "syscon";
reg = <0x11500 0x40>;
}
CZ.NIC's Turris Mox SOHO router Device Tree Bindings
----------------------------------------------------
Required root node property:
- compatible: must contain "cznic,turris-mox"

2
MAINTAINERS
View File

@ -11867,6 +11867,7 @@ S: Maintained
F: arch/arm/mach-omap2/
F: arch/arm/plat-omap/
F: arch/arm/configs/omap2plus_defconfig
F: drivers/bus/ti-sysc.c
F: drivers/i2c/busses/i2c-omap.c
F: drivers/irqchip/irq-omap-intc.c
F: drivers/mfd/*omap*.c
@ -11887,6 +11888,7 @@ F: drivers/regulator/tps65910-regulator.c
F: drivers/regulator/twl-regulator.c
F: drivers/regulator/twl6030-regulator.c
F: include/linux/platform_data/i2c-omap.h
F: include/linux/platform_data/ti-sysc.h
ONION OMEGA2+ BOARD
M: Harvey Hunt <harveyhuntnexus@gmail.com>

4
arch/arm/boot/dts/Makefile
View File

@ -336,7 +336,8 @@ dtb-$(CONFIG_MACH_MESON8) += \
dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \
pxa910-dkb.dtb \
mmp2-brownstone.dtb
mmp2-brownstone.dtb \
mmp2-olpc-xo-1-75.dtb
dtb-$(CONFIG_ARCH_MPS2) += \
mps2-an385.dtb \
mps2-an399.dtb
@ -1278,6 +1279,7 @@ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-ast2600-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-facebook-cmm.dtb \

4
arch/arm/boot/dts/am33xx-l4.dtsi
View File

@ -673,7 +673,6 @@ segment@0 { /* 0x4a000000 */
target-module@100000 { /* 0x4a100000, ap 3 08.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
ti,hwmods = "cpgmac0";
reg = <0x101200 0x4>,
<0x101208 0x4>,
<0x101204 0x4>;
@ -719,9 +718,10 @@ mac: ethernet@0 {
davinci_mdio: mdio@1000 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
reg = <0x1000 0x100>;
status = "disabled";

24
arch/arm/boot/dts/am3517.dtsi
View File

@ -88,6 +88,30 @@ hecc: can@5c050000 {
interrupts = <24>;
clocks = <&hecc_ck>;
};
/*
* On am3517 the OCP registers do not seem to be accessible
* similar to the omap34xx. Maybe SGX is permanently set to
* "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
* write-only at 0x50000e10. We detect SGX based on the SGX
* revision register instead of the unreadable OCP revision
* register.
*/
sgx_module: target-module@50000000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x50000014 0x4>;
reg-names = "rev";
clocks = <&sgx_fck>, <&sgx_ick>;
clock-names = "fck", "ick";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50000000 0x4000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
};
};

6
arch/arm/boot/dts/am437x-l4.dtsi
View File

@ -512,7 +512,6 @@ segment@0 { /* 0x4a000000 */
target-module@100000 { /* 0x4a100000, ap 3 04.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
ti,hwmods = "cpgmac0";
reg = <0x101200 0x4>,
<0x101208 0x4>,
<0x101204 0x4>;
@ -559,11 +558,10 @@ GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
davinci_mdio: mdio@1000 {
compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x1000 0x100>;
clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cpsw_125mhz_gclk>;
clock-names = "fck";
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
status = "disabled";
};

80
arch/arm/boot/dts/aspeed-ast2600-evb.dts Normal file
View File

@ -0,0 +1,80 @@
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2019 IBM Corp.
/dts-v1/;
#include "aspeed-g6.dtsi"
/ {
model = "AST2600 EVB";
compatible = "aspeed,ast2600";
aliases {
serial4 = &uart5;
};
chosen {
bootargs = "console=ttyS4,115200n8";
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x80000000>;
};
};
&mdio1 {
status = "okay";
ethphy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&mdio2 {
status = "okay";
ethphy2: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&mdio3 {
status = "okay";
ethphy3: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&mac1 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&ethphy1>;
};
&mac2 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&ethphy2>;
};
&mac3 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&ethphy3>;
};
&emmc {
status = "okay";
};
&rtc {
status = "okay";
};

1154
arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi Normal file
View File

File diff suppressed because it is too large Load Diff

261
arch/arm/boot/dts/aspeed-g6.dtsi Normal file
View File

@ -0,0 +1,261 @@
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2019 IBM Corp.
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/ast2600-clock.h>
/ {
model = "Aspeed BMC";
compatible = "aspeed,ast2600";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
aliases {
serial4 = &uart5;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "aspeed,ast2600-smp";
cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf00>;
};
cpu@f01 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf01>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
clocks = <&syscon ASPEED_CLK_HPLL>;
arm,cpu-registers-not-fw-configured;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges;
gic: interrupt-controller@40461000 {
compatible = "arm,cortex-a7-gic";
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&gic>;
reg = <0x40461000 0x1000>,
<0x40462000 0x1000>,
<0x40464000 0x2000>,
<0x40466000 0x2000>;
};
mdio0: mdio@1e650000 {
compatible = "aspeed,ast2600-mdio";
reg = <0x1e650000 0x8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mdio1: mdio@1e650008 {
compatible = "aspeed,ast2600-mdio";
reg = <0x1e650008 0x8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mdio2: mdio@1e650010 {
compatible = "aspeed,ast2600-mdio";
reg = <0x1e650010 0x8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mdio3: mdio@1e650018 {
compatible = "aspeed,ast2600-mdio";
reg = <0x1e650018 0x8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mac0: ftgmac@1e660000 {
compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
mac1: ftgmac@1e680000 {
compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
mac2: ftgmac@1e670000 {
compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
reg = <0x1e670000 0x180>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
status = "disabled";
};
mac3: ftgmac@1e690000 {
compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
reg = <0x1e690000 0x180>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
status = "disabled";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
syscon: syscon@1e6e2000 {
compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1000>;
ranges = <0 0x1e6e2000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,ast2600-pinctrl";
};
smp-memram@180 {
compatible = "aspeed,ast2600-smpmem";
reg = <0x180 0x40>;
};
};
rng: hwrng@1e6e2524 {
compatible = "timeriomem_rng";
reg = <0x1e6e2524 0x4>;
period = <1>;
quality = <100>;
};
rtc: rtc@1e781000 {
compatible = "aspeed,ast2600-rtc";
reg = <0x1e781000 0x18>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart5: serial@1e784000 {
compatible = "ns16550a";
reg = <0x1e784000 0x1000>;
reg-shift = <2>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
};
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785000 0x40>;
};
wdt2: watchdog@1e785040 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785040 0x40>;
status = "disabled";
};
wdt3: watchdog@1e785080 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785080 0x40>;
status = "disabled";
};
wdt4: watchdog@1e7850C0 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e7850C0 0x40>;
status = "disabled";
};
sdc: sdc@1e740000 {
compatible = "aspeed,ast2600-sd-controller";
reg = <0x1e740000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1e740000 0x10000>;
clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
status = "disabled";
sdhci0: sdhci@1e740100 {
compatible = "aspeed,ast2600-sdhci", "sdhci";
reg = <0x100 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
sdhci,auto-cmd12;
clocks = <&syscon ASPEED_CLK_SDIO>;
status = "disabled";
};
sdhci1: sdhci@1e740200 {
compatible = "aspeed,ast2600-sdhci", "sdhci";
reg = <0x200 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
sdhci,auto-cmd12;
clocks = <&syscon ASPEED_CLK_SDIO>;
status = "disabled";
};
};
emmc: sdc@1e750000 {
compatible = "aspeed,ast2600-sd-controller";
reg = <0x1e750000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1e750000 0x10000>;
clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
status = "disabled";
sdhci@1e750100 {
compatible = "aspeed,ast2600-sdhci";
reg = <0x100 0x100>;
sdhci,auto-cmd12;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_EMMC>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc_default>;
};
};
};
};
};
#include "aspeed-g6-pinctrl.dtsi"

43
arch/arm/boot/dts/dra7-l4.dtsi
View File

@ -1118,7 +1118,6 @@ segment@0 { /* 0x48000000 */
target-module@20000 { /* 0x48020000, ap 3 04.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart3";
reg = <0x20050 0x4>,
<0x20054 0x4>,
<0x20058 0x4>;
@ -1263,7 +1262,6 @@ timer9: timer@0 {
gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio7";
reg = <0x51000 0x4>,
<0x51010 0x4>,
<0x51114 0x4>;
@ -1297,7 +1295,6 @@ gpio7: gpio@0 {
target-module@53000 { /* 0x48053000, ap 35 36.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio8";
reg = <0x53000 0x4>,
<0x53010 0x4>,
<0x53114 0x4>;
@ -1331,7 +1328,6 @@ gpio8: gpio@0 {
target-module@55000 { /* 0x48055000, ap 13 0e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio2";
reg = <0x55000 0x4>,
<0x55010 0x4>,
<0x55114 0x4>;
@ -1365,7 +1361,6 @@ gpio2: gpio@0 {
target-module@57000 { /* 0x48057000, ap 15 06.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio3";
reg = <0x57000 0x4>,
<0x57010 0x4>,
<0x57114 0x4>;
@ -1399,7 +1394,6 @@ gpio3: gpio@0 {
target-module@59000 { /* 0x48059000, ap 17 16.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio4";
reg = <0x59000 0x4>,
<0x59010 0x4>,
<0x59114 0x4>;
@ -1433,7 +1427,6 @@ gpio4: gpio@0 {
target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio5";
reg = <0x5b000 0x4>,
<0x5b010 0x4>,
<0x5b114 0x4>;
@ -1467,7 +1460,6 @@ gpio5: gpio@0 {
target-module@5d000 { /* 0x4805d000, ap 21 26.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio6";
reg = <0x5d000 0x4>,
<0x5d010 0x4>,
<0x5d114 0x4>;
@ -1501,7 +1493,6 @@ gpio6: gpio@0 {
target-module@60000 { /* 0x48060000, ap 23 32.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c3";
reg = <0x60000 0x8>,
<0x60010 0x8>,
<0x60090 0x8>;
@ -1534,7 +1525,6 @@ i2c3: i2c@0 {
target-module@66000 { /* 0x48066000, ap 63 14.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart5";
reg = <0x66050 0x4>,
<0x66054 0x4>,
<0x66058 0x4>;
@ -1567,7 +1557,6 @@ uart5: serial@0 {
target-module@68000 { /* 0x48068000, ap 53 1c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart6";
reg = <0x68050 0x4>,
<0x68054 0x4>,
<0x68058 0x4>;
@ -1600,7 +1589,6 @@ uart6: serial@0 {
target-module@6a000 { /* 0x4806a000, ap 24 24.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart1";
reg = <0x6a050 0x4>,
<0x6a054 0x4>,
<0x6a058 0x4>;
@ -1633,7 +1621,6 @@ uart1: serial@0 {
target-module@6c000 { /* 0x4806c000, ap 26 2c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart2";
reg = <0x6c050 0x4>,
<0x6c054 0x4>,
<0x6c058 0x4>;
@ -1666,7 +1653,6 @@ uart2: serial@0 {
target-module@6e000 { /* 0x4806e000, ap 28 0c.1 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart4";
reg = <0x6e050 0x4>,
<0x6e054 0x4>,
<0x6e058 0x4>;
@ -1699,7 +1685,6 @@ uart4: serial@0 {
target-module@70000 { /* 0x48070000, ap 30 22.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c1";
reg = <0x70000 0x8>,
<0x70010 0x8>,
<0x70090 0x8>;
@ -1732,7 +1717,6 @@ i2c1: i2c@0 {
target-module@72000 { /* 0x48072000, ap 32 2a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c2";
reg = <0x72000 0x8>,
<0x72010 0x8>,
<0x72090 0x8>;
@ -1795,7 +1779,6 @@ elm: elm@0 {
target-module@7a000 { /* 0x4807a000, ap 81 3a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c4";
reg = <0x7a000 0x8>,
<0x7a010 0x8>,
<0x7a090 0x8>;
@ -1828,7 +1811,6 @@ i2c4: i2c@0 {
target-module@7c000 { /* 0x4807c000, ap 83 4a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c5";
reg = <0x7c000 0x8>,
<0x7c010 0x8>,
<0x7c090 0x8>;
@ -1942,7 +1924,6 @@ rng: rng@0 {
target-module@98000 { /* 0x48098000, ap 47 08.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mcspi1";
reg = <0x98000 0x4>,
<0x98010 0x4>;
reg-names = "rev", "sysc";
@ -1982,7 +1963,6 @@ mcspi1: spi@0 {
target-module@9a000 { /* 0x4809a000, ap 49 10.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mcspi2";
reg = <0x9a000 0x4>,
<0x9a010 0x4>;
reg-names = "rev", "sysc";
@ -2017,7 +1997,6 @@ mcspi2: spi@0 {
target-module@9c000 { /* 0x4809c000, ap 51 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mmc1";
reg = <0x9c000 0x4>,
<0x9c010 0x4>;
reg-names = "rev", "sysc";
@ -2077,7 +2056,6 @@ target-module@a8000 { /* 0x480a8000, ap 59 1a.0 */
target-module@ad000 { /* 0x480ad000, ap 61 20.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mmc3";
reg = <0xad000 0x4>,
<0xad010 0x4>;
reg-names = "rev", "sysc";
@ -2137,7 +2115,6 @@ hdqw1w: 1w@0 {
target-module@b4000 { /* 0x480b4000, ap 65 40.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mmc2";
reg = <0xb4000 0x4>,
<0xb4010 0x4>;
reg-names = "rev", "sysc";
@ -2174,7 +2151,6 @@ mmc2: mmc@0 {
target-module@b8000 { /* 0x480b8000, ap 67 48.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mcspi3";
reg = <0xb8000 0x4>,
<0xb8010 0x4>;
reg-names = "rev", "sysc";
@ -2206,7 +2182,6 @@ mcspi3: spi@0 {
target-module@ba000 { /* 0x480ba000, ap 69 18.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mcspi4";
reg = <0xba000 0x4>,
<0xba010 0x4>;
reg-names = "rev", "sysc";
@ -2238,7 +2213,6 @@ mcspi4: spi@0 {
target-module@d1000 { /* 0x480d1000, ap 71 28.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mmc4";
reg = <0xd1000 0x4>,
<0xd1010 0x4>;
reg-names = "rev", "sysc";
@ -2384,7 +2358,6 @@ segment@0 { /* 0x48400000 */
target-module@20000 { /* 0x48420000, ap 47 02.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart7";
reg = <0x20050 0x4>,
<0x20054 0x4>,
<0x20058 0x4>;
@ -2415,7 +2388,6 @@ uart7: serial@0 {
target-module@22000 { /* 0x48422000, ap 49 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart8";
reg = <0x22050 0x4>,
<0x22054 0x4>,
<0x22058 0x4>;
@ -2446,7 +2418,6 @@ uart8: serial@0 {
target-module@24000 { /* 0x48424000, ap 51 12.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart9";
reg = <0x24050 0x4>,
<0x24054 0x4>,
<0x24058 0x4>;
@ -2735,7 +2706,6 @@ target-module@5d000 { /* 0x4845d000, ap 61 22.0 */
target-module@60000 { /* 0x48460000, ap 9 0e.0 */
compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
ti,hwmods = "mcasp1";
reg = <0x60000 0x4>,
<0x60004 0x4>;
reg-names = "rev", "sysc";
@ -2772,7 +2742,6 @@ mcasp1: mcasp@0 {
target-module@64000 { /* 0x48464000, ap 11 1e.0 */
compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
ti,hwmods = "mcasp2";
reg = <0x64000 0x4>,
<0x64004 0x4>;
reg-names = "rev", "sysc";
@ -2809,7 +2778,6 @@ mcasp2: mcasp@0 {
target-module@68000 { /* 0x48468000, ap 13 26.0 */
compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
ti,hwmods = "mcasp3";
reg = <0x68000 0x4>,
<0x68004 0x4>;
reg-names = "rev", "sysc";
@ -2845,7 +2813,6 @@ mcasp3: mcasp@0 {
target-module@6c000 { /* 0x4846c000, ap 15 2e.0 */
compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
ti,hwmods = "mcasp4";
reg = <0x6c000 0x4>,
<0x6c004 0x4>;
reg-names = "rev", "sysc";
@ -2881,7 +2848,6 @@ mcasp4: mcasp@0 {
target-module@70000 { /* 0x48470000, ap 19 36.0 */
compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
ti,hwmods = "mcasp5";
reg = <0x70000 0x4>,
<0x70004 0x4>;
reg-names = "rev", "sysc";
@ -2917,7 +2883,6 @@ mcasp5: mcasp@0 {
target-module@74000 { /* 0x48474000, ap 35 14.0 */
compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
ti,hwmods = "mcasp6";
reg = <0x74000 0x4>,
<0x74004 0x4>;
reg-names = "rev", "sysc";
@ -2953,7 +2918,6 @@ mcasp6: mcasp@0 {
target-module@78000 { /* 0x48478000, ap 39 0c.0 */
compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
ti,hwmods = "mcasp7";
reg = <0x78000 0x4>,
<0x78004 0x4>;
reg-names = "rev", "sysc";
@ -2989,7 +2953,6 @@ mcasp7: mcasp@0 {
target-module@7c000 { /* 0x4847c000, ap 43 04.0 */
compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
ti,hwmods = "mcasp8";
reg = <0x7c000 0x4>,
<0x7c004 0x4>;
reg-names = "rev", "sysc";
@ -3045,7 +3008,6 @@ dcan2: can@0 {
target-module@84000 { /* 0x48484000, ap 3 10.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
ti,hwmods = "gmac";
reg = <0x85200 0x4>,
<0x85208 0x4>,
<0x85204 0x4>;
@ -3103,9 +3065,10 @@ mac: ethernet@0 {
davinci_mdio: mdio@1000 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
reg = <0x1000 0x100>;
};
@ -4311,7 +4274,6 @@ segment@10000 { /* 0x4ae10000 */
target-module@0 { /* 0x4ae10000, ap 5 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio1";
reg = <0x0 0x4>,
<0x10 0x4>,
<0x114 0x4>;
@ -4479,7 +4441,6 @@ target-module@6000 { /* 0x4ae26000, ap 13 48.0 */
target-module@b000 { /* 0x4ae2b000, ap 28 02.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "uart10";
reg = <0xb050 0x4>,
<0xb054 0x4>,
<0xb058 0x4>;

1
arch/arm/boot/dts/gemini-dlink-dir-685.dts
View File

@ -72,7 +72,6 @@ panel: display@0 {
reg = <0>;
/* 50 ns min period = 20 MHz */
spi-max-frequency = <20000000>;
spi-cpol; /* Clock active low */
vcc-supply = <&vdisp>;
iovcc-supply = <&vdisp>;
vci-supply = <&vdisp>;

244
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts Normal file
View File

@ -0,0 +1,244 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* OLPC XO 1.75 Laptop.
*
* Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
*/
/dts-v1/;
#include "mmp2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "OLPC XO-1.75";
compatible = "olpc,xo-1.75", "mrvl,mmp2";
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
framebuffer@1fc00000 {
compatible = "simple-framebuffer";
reg = <0x1fc00000 (1200 * 900 * 2)>;
width = <1200>;
height = <900>;
stride = <(1200 * 2)>;
format = "r5g6b5";
clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>,
<&soc_clocks MMP2_CLK_DISP0>;
};
};
memory {
linux,usable-memory = <0x0 0x1f800000>;
available = <0xcf000 0x1ef31000 0x1000 0xbf000>;
reg = <0x0 0x20000000>;
device_type = "memory";
};
gpio-keys {
compatible = "gpio-keys";
lid {
label = "Lid";
gpios = <&gpio 129 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
wakeup-source;
};
tablet_mode {
label = "E-Book Mode";
gpios = <&gpio 128 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_TABLET_MODE>;
wakeup-source;
};
microphone_insert {
label = "Microphone Plug";
gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
linux,code = <SW_MICROPHONE_INSERT>;
debounce-interval = <100>;
wakeup-source;
};
headphone_insert {
label = "Headphone Plug";
gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
linux,code = <SW_HEADPHONE_INSERT>;
debounce-interval = <100>;
wakeup-source;
};
};
camera_i2c {
compatible = "i2c-gpio";
gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>,
<&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
i2c-gpio,timeout-ms = <1000>;
status = "okay";
camera@21 {
compatible = "ovti,ov7670";
reg = <0x21>;
reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>;
clocks = <&camera0>;
clock-names = "xclk";
port {
ov7670_0: endpoint {
hsync-active = <1>;
vsync-active = <1>;
remote-endpoint = <&camera0_0>;
};
};
};
};
battery {
compatible = "olpc,xo1.5-battery", "olpc,xo1-battery";
};
wlan_reg: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "wlan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
wlan_pwrseq: pwrseq0 {
compatible = "mmc-pwrseq-sd8787";
powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
};
soc {
axi@d4200000 {
ap-sp@d4290000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "olpc,ap-sp";
interrupts = <40>;
reg = <0xd4290000 0x1000>;
data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
};
};
&uart3 {
status = "okay";
};
&uart4 {
status = "okay";
};
&rtc {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb_otg0 {
status = "okay";
};
&mmc1 {
clock-frequency = <50000000>;
no-1-8-v;
mrvl,clk-delay-cycles = <31>;
broken-cd;
status = "okay";
};
&mmc2 {
clock-frequency = <50000000>;
no-1-8-v;
bus-width = <4>;
non-removable;
broken-cd;
wakeup-source;
keep-power-in-suspend;
mmc-pwrseq = <&wlan_pwrseq>;
vmmc-supply = <&wlan_reg>;
status = "okay";
};
&mmc3 {
clock-frequency = <50000000>;
no-1-8-v;
bus-width = <8>;
non-removable;
broken-cd;
mrvl,clk-delay-cycles = <31>;
status = "okay";
};
&twsi1 {
status = "okay";
audio-codec@1a {
compatible = "realtek,alc5631";
reg = <0x1a>;
status = "okay";
};
};
&twsi2 {
status = "okay";
rtc@68 {
compatible = "dallas,ds1338";
reg = <0x68>;
status = "okay";
};
};
&twsi6 {
status = "okay";
accelerometer@1d {
compatible = "st,lis331dlh", "st,lis3lv02d";
reg = <0x1d>;
status = "okay";
};
};
&ssp3 {
#address-cells = <0>;
spi-slave;
status = "okay";
ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>;
slave {
compatible = "olpc,xo1.75-ec";
spi-cpha;
cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;
};
};
&camera0 {
status = "okay";
port {
camera0_0: endpoint {
remote-endpoint = <&ov7670_0>;
};
};
};

48
arch/arm/boot/dts/mmp2.dtsi
View File

@ -117,7 +117,7 @@ intcmux55: interrupt-controller@d4282188 {
mrvl,intc-nr-irqs = <2>;
};
usb_otg_phy0: usb-otg-phy@d4207000 {
usb_phy0: usb-phy@d4207000 {
compatible = "marvell,mmp2-usb-phy";
reg = <0xd4207000 0x40>;
#phy-cells = <0>;
@ -130,7 +130,7 @@ usb_otg0: usb-otg@d4208000 {
interrupts = <44>;
clocks = <&soc_clocks MMP2_CLK_USB>;
clock-names = "USBCLK";
phys = <&usb_otg_phy0>;
phys = <&usb_phy0>;
phy-names = "usb";
status = "disabled";
};
@ -170,6 +170,28 @@ mmc4: mmc@d4281800 {
interrupts = <54>;
status = "disabled";
};
camera0: camera@d420a000 {
compatible = "marvell,mmp2-ccic";
reg = <0xd420a000 0x800>;
interrupts = <42>;
clocks = <&soc_clocks MMP2_CLK_CCIC0>;
clock-names = "axi";
#clock-cells = <0>;
clock-output-names = "mclk";
status = "disabled";
};
camera1: camera@d420a800 {
compatible = "marvell,mmp2-ccic";
reg = <0xd420a800 0x800>;
interrupts = <30>;
clocks = <&soc_clocks MMP2_CLK_CCIC1>;
clock-names = "axi";
#clock-cells = <0>;
clock-output-names = "mclk";
status = "disabled";
};
};
apb@d4000000 { /* APB */
@ -192,6 +214,7 @@ uart1: uart@d4030000 {
interrupts = <27>;
clocks = <&soc_clocks MMP2_CLK_UART0>;
resets = <&soc_clocks MMP2_CLK_UART0>;
reg-shift = <2>;
status = "disabled";
};
@ -201,6 +224,7 @@ uart2: uart@d4017000 {
interrupts = <28>;
clocks = <&soc_clocks MMP2_CLK_UART1>;
resets = <&soc_clocks MMP2_CLK_UART1>;
reg-shift = <2>;
status = "disabled";
};
@ -210,6 +234,7 @@ uart3: uart@d4018000 {
interrupts = <24>;
clocks = <&soc_clocks MMP2_CLK_UART2>;
resets = <&soc_clocks MMP2_CLK_UART2>;
reg-shift = <2>;
status = "disabled";
};
@ -219,6 +244,7 @@ uart4: uart@d4016000 {
interrupts = <46>;
clocks = <&soc_clocks MMP2_CLK_UART3>;
resets = <&soc_clocks MMP2_CLK_UART3>;
reg-shift = <2>;
status = "disabled";
};
@ -346,40 +372,48 @@ rtc: rtc@d4010000 {
status = "disabled";
};
ssp1: ssp@d4035000 {
ssp1: spi@d4035000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4035000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP0>;
interrupts = <0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ssp2: ssp@d4036000 {
ssp2: spi@d4036000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4036000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP1>;
interrupts = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ssp3: ssp@d4037000 {
ssp3: spi@d4037000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4037000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP2>;
interrupts = <20>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ssp4: ssp@d4039000 {
ssp4: spi@d4039000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4039000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP3>;
interrupts = <21>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
soc_clocks: clocks{
soc_clocks: clocks {
compatible = "marvell,mmp2-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,

26
arch/arm/boot/dts/omap34xx.dtsi
View File

@ -100,6 +100,32 @@ smartreflex_mpu_iva: smartreflex@480c9000 {
interrupts = <18>;
};
};
/*
* On omap34xx the OCP registers do not seem to be accessible
* at all unlike on 36xx. Maybe SGX is permanently set to
* "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
* write-only at 0x50000e10. We detect SGX based on the SGX
* revision register instead of the unreadable OCP revision
* register. Also note that on early 34xx es1 revision there
* are also different clocks, but we do not have any dts users
* for it.
*/
sgx_module: target-module@50000000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x50000014 0x4>;
reg-names = "rev";
clocks = <&sgx_fck>, <&sgx_ick>;
clock-names = "fck", "ick";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50000000 0x4000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
};
thermal_zones: thermal-zones {

28
arch/arm/boot/dts/omap36xx.dtsi
View File

@ -139,6 +139,34 @@ smartreflex_mpu_iva: smartreflex@480c9000 {
interrupts = <18>;
};
};
/*
* Note that the sysconfig register layout is a subset of the
* "ti,sysc-omap4" type register with just sidle and midle bits
* available while omap34xx has "ti,sysc-omap2" type sysconfig.
*/
sgx_module: target-module@50000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5000fe00 0x4>,
<0x5000fe10 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&sgx_fck>, <&sgx_ick>;
clock-names = "fck", "ick";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50000000 0x2000000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
};
thermal_zones: thermal-zones {

1
arch/arm/boot/dts/omap4-l4-abe.dtsi
View File

@ -255,7 +255,6 @@ dmic: dmic@0 {
target-module@30000 { /* 0x40130000, ap 14 0e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "wd_timer3";
reg = <0x30000 0x4>,
<0x30010 0x4>,
<0x30014 0x4>;

39
arch/arm/boot/dts/omap4-l4.dtsi
View File

@ -456,17 +456,43 @@ usb2_phy: usb2phy@80 {
};
};
/* d2d mdm */
target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */
compatible = "ti,sysc";
status = "disabled";
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x36000 0x4>,
<0x36010 0x4>,
<0x36014 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,syss-mask = <1>;
/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x36000 0x1000>;
};
/* d2d mpu */
target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */
compatible = "ti,sysc";
status = "disabled";
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x4d000 0x4>,
<0x4d010 0x4>,
<0x4d014 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,syss-mask = <1>;
/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x4d000 0x1000>;
@ -1094,7 +1120,6 @@ gpio1: gpio@0 {
target-module@4000 { /* 0x4a314000, ap 7 18.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "wd_timer2";
reg = <0x4000 0x4>,
<0x4010 0x4>,
<0x4014 0x4>;
@ -1695,7 +1720,6 @@ gpio6: gpio@0 {
target-module@60000 { /* 0x48060000, ap 25 1e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c3";
reg = <0x60000 0x8>,
<0x60010 0x8>,
<0x60090 0x8>;
@ -1814,7 +1838,6 @@ uart4: serial@0 {
target-module@70000 { /* 0x48070000, ap 32 28.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c1";
reg = <0x70000 0x8>,
<0x70010 0x8>,
<0x70090 0x8>;
@ -1846,7 +1869,6 @@ i2c1: i2c@0 {
target-module@72000 { /* 0x48072000, ap 34 30.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c2";
reg = <0x72000 0x8>,
<0x72010 0x8>,
<0x72090 0x8>;
@ -2401,7 +2423,6 @@ segment@200000 { /* 0x48200000 */
target-module@150000 { /* 0x48350000, ap 77 4c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "i2c4";
reg = <0x150000 0x8>,
<0x150010 0x8>,
<0x150090 0x8>;

1
arch/arm/boot/dts/omap4.dtsi
View File

@ -330,7 +330,6 @@ abb_iva: regulator-abb-iva {
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "gpu";
reg = <0x5601fc00 0x4>,
<0x5601fc10 0x4>;
reg-names = "rev", "sysc";

23
arch/arm/boot/dts/omap5.dtsi
View File

@ -257,6 +257,29 @@ sata: sata@4a141100 {
ports-implemented = <0x1>;
};
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x56000000 0x2000000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
dss: dss@58000000 {
compatible = "ti,omap5-dss";
reg = <0x58000000 0x80>;

14
arch/arm/boot/dts/omap54xx-clocks.dtsi
View File

@ -1146,6 +1146,20 @@ dss_clkctrl: clk@20 {
};
};
gpu_cm: clock-controller@1500 {
compatible = "ti,omap4-cm";
reg = <0x1500 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1500 0x100>;
gpu_clkctrl: clk@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
l3init_cm: l3init_cm@1600 {
compatible = "ti,omap4-cm";
reg = <0x1600 0x100>;

1
arch/arm/mach-exynos/Kconfig
View File

@ -19,6 +19,7 @@ menuconfig ARCH_EXYNOS
select EXYNOS_SROM
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select GPIOLIB
select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5 && VIRTUALIZATION
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG

3
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
View File

@ -30,7 +30,6 @@ extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0;
extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1;
extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
@ -72,8 +71,6 @@ extern struct omap_hwmod am33xx_rng_hwmod;
extern struct omap_hwmod am33xx_ocmcram_hwmod;
extern struct omap_hwmod am33xx_smartreflex0_hwmod;
extern struct omap_hwmod am33xx_smartreflex1_hwmod;
extern struct omap_hwmod am33xx_cpgmac0_hwmod;
extern struct omap_hwmod am33xx_mdio_hwmod;
extern struct omap_hwmod am33xx_dcan0_hwmod;
extern struct omap_hwmod am33xx_dcan1_hwmod;
extern struct omap_hwmod am33xx_elm_hwmod;

6
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
View File

@ -122,12 +122,6 @@ struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
.master = &am33xx_cpgmac0_hwmod,
.slave = &am33xx_mdio_hwmod,
.user = OCP_USER_MPU,
};
struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_elm_hwmod,

50
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
View File

@ -349,54 +349,6 @@ struct omap_hwmod_class am33xx_control_hwmod_class = {
.name = "control",
};
/*
* 'cpgmac' class
* cpsw/cpgmac sub system
*/
static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x8,
.syss_offs = 0x4,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
MSTANDBY_NO),
.sysc_fields = &omap_hwmod_sysc_type3,
};
static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
.name = "cpgmac0",
.sysc = &am33xx_cpgmac_sysc,
};
struct omap_hwmod am33xx_cpgmac0_hwmod = {
.name = "cpgmac0",
.class = &am33xx_cpgmac0_hwmod_class,
.clkdm_name = "cpsw_125mhz_clkdm",
.flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
.main_clk = "cpsw_125mhz_gclk",
.mpu_rt_idx = 1,
.prcm = {
.omap4 = {
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* mdio class
*/
static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
.name = "davinci_mdio",
};
struct omap_hwmod am33xx_mdio_hwmod = {
.name = "davinci_mdio",
.class = &am33xx_mdio_hwmod_class,
.clkdm_name = "cpsw_125mhz_clkdm",
.main_clk = "cpsw_125mhz_gclk",
};
/*
* dcan class
*/
@ -1072,7 +1024,6 @@ static void omap_hwmod_am33xx_clkctrl(void)
CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET);
CLKCTRL(am33xx_cpgmac0_hwmod, AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
@ -1134,7 +1085,6 @@ static void omap_hwmod_am43xx_clkctrl(void)
CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET);
CLKCTRL(am33xx_cpgmac0_hwmod, AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);

9
arch/arm/mach-omap2/omap_hwmod_33xx_data.c
View File

@ -372,13 +372,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
.master = &am33xx_l4_hs_hwmod,
.slave = &am33xx_cpgmac0_hwmod,
.clk = "cpsw_125mhz_gclk",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_lcdc_hwmod,
@ -462,8 +455,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l3_main__tptc2,
&am33xx_l3_main__ocmc,
&am33xx_l3_s__usbss,
&am33xx_l4_hs__cpgmac0,
&am33xx_cpgmac0__mdio,
&am33xx_l3_main__sha0,
&am33xx_l3_main__aes0,
&am33xx_l4_per__rng,

9
arch/arm/mach-omap2/omap_hwmod_43xx_data.c
View File

@ -597,13 +597,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = {
.master = &am43xx_l4_hs_hwmod,
.slave = &am33xx_cpgmac0_hwmod,
.clk = "cpsw_125mhz_gclk",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = {
.master = &am33xx_l4_wkup_hwmod,
.slave = &am33xx_timer1_hwmod,
@ -859,8 +852,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l3_main__tptc1,
&am33xx_l3_main__tptc2,
&am33xx_l3_main__ocmc,
&am43xx_l4_hs__cpgmac0,
&am33xx_cpgmac0__mdio,
&am33xx_l3_main__sha0,
&am33xx_l3_main__aes0,
&am43xx_l3_main__des,

168
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -28,7 +28,6 @@
#include "cm2_44xx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
#define OMAP44XX_IRQ_GIC_START 32
@ -275,29 +274,6 @@ static struct omap_hwmod omap44xx_aess_hwmod = {
},
};
/*
* 'c2c' class
* chip 2 chip interface used to plug the ape soc (omap) with an external modem
* soc
*/
static struct omap_hwmod_class omap44xx_c2c_hwmod_class = {
.name = "c2c",
};
/* c2c */
static struct omap_hwmod omap44xx_c2c_hwmod = {
.name = "c2c",
.class = &omap44xx_c2c_hwmod_class,
.clkdm_name = "d2d_clkdm",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET,
},
},
};
/*
* 'counter' class
* 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
@ -1085,41 +1061,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = {
},
};
/*
* 'gpu' class
* 2d/3d graphics accelerator
*/
static struct omap_hwmod_class_sysconfig omap44xx_gpu_sysc = {
.rev_offs = 0x1fc00,
.sysc_offs = 0x1fc10,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
};
static struct omap_hwmod_class omap44xx_gpu_hwmod_class = {
.name = "gpu",
.sysc = &omap44xx_gpu_sysc,
};
/* gpu */
static struct omap_hwmod omap44xx_gpu_hwmod = {
.name = "gpu",
.class = &omap44xx_gpu_hwmod_class,
.clkdm_name = "l3_gfx_clkdm",
.main_clk = "sgx_clk_mux",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_GFX_GFX_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* 'hdq1w' class
* hdq / 1-wire serial interface controller
@ -2433,61 +2374,6 @@ static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
},
};
/*
* 'wd_timer' class
* 32-bit watchdog upward counter that generates a pulse on the reset pin on
* overflow condition
*/
static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
.name = "wd_timer",
.sysc = &omap44xx_wd_timer_sysc,
.pre_shutdown = &omap2_wd_timer_disable,
.reset = &omap2_wd_timer_reset,
};
/* wd_timer2 */
static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
.name = "wd_timer2",
.class = &omap44xx_wd_timer_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
.main_clk = "sys_32k_ck",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/* wd_timer3 */
static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
.name = "wd_timer3",
.class = &omap44xx_wd_timer_hwmod_class,
.clkdm_name = "abe_clkdm",
.main_clk = "sys_32k_ck",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* interfaces
*/
@ -2596,14 +2482,6 @@ static struct omap_hwmod_ocp_if omap44xx_fdif__l3_main_2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* gpu -> l3_main_2 */
static struct omap_hwmod_ocp_if omap44xx_gpu__l3_main_2 = {
.master = &omap44xx_gpu_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* hsi -> l3_main_2 */
static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
.master = &omap44xx_hsi_hwmod,
@ -2788,14 +2666,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
.user = OCP_USER_SDMA,
};
/* l3_main_2 -> c2c */
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__c2c = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_c2c_hwmod,
.clk = "l3_div_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> counter_32k */
static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
.master = &omap44xx_l4_wkup_hwmod,
@ -3028,14 +2898,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_2 -> gpu */
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpu = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_gpu_hwmod,
.clk = "l3_div_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> hdq1w */
static struct omap_hwmod_ocp_if omap44xx_l4_per__hdq1w = {
.master = &omap44xx_l4_per_hwmod,
@ -3396,30 +3258,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
.master = &omap44xx_l4_wkup_hwmod,
.slave = &omap44xx_wd_timer2_hwmod,
.clk = "l4_wkup_clk_mux_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_abe -> wd_timer3 */
static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_wd_timer3_hwmod,
.clk = "ocp_abe_iclk",
.user = OCP_USER_MPU,
};
/* l4_abe -> wd_timer3 (dma) */
static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_wd_timer3_hwmod,
.clk = "ocp_abe_iclk",
.user = OCP_USER_SDMA,
};
/* mpu -> emif1 */
static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = {
.master = &omap44xx_mpu_hwmod,
@ -3450,7 +3288,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_debugss__l3_main_2,
&omap44xx_dma_system__l3_main_2,
&omap44xx_fdif__l3_main_2,
&omap44xx_gpu__l3_main_2,
&omap44xx_hsi__l3_main_2,
&omap44xx_ipu__l3_main_2,
&omap44xx_iss__l3_main_2,
@ -3474,7 +3311,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_cfg__ocp_wp_noc,
&omap44xx_l4_abe__aess,
&omap44xx_l4_abe__aess_dma,
&omap44xx_l3_main_2__c2c,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
&omap44xx_l4_cfg__ctrl_module_pad_core,
@ -3503,7 +3339,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_per__elm,
&omap44xx_l4_cfg__fdif,
&omap44xx_l3_main_2__gpmc,
&omap44xx_l3_main_2__gpu,
&omap44xx_l4_per__hdq1w,
&omap44xx_l4_cfg__hsi,
&omap44xx_l3_main_2__ipu,
@ -3551,9 +3386,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_otg_hs,
&omap44xx_l4_cfg__usb_tll_hs,
&omap44xx_l4_wkup__wd_timer2,
&omap44xx_l4_abe__wd_timer3,
&omap44xx_l4_abe__wd_timer3_dma,
&omap44xx_mpu__emif1,
&omap44xx_mpu__emif2,
&omap44xx_l3_main_2__aes1,

475
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View File

@ -284,56 +284,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
},
};
/*
* 'gmac' class
* cpsw/gmac sub system
*/
static struct omap_hwmod_class_sysconfig dra7xx_gmac_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x8,
.syss_offs = 0x4,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
MSTANDBY_NO),
.sysc_fields = &omap_hwmod_sysc_type3,
};
static struct omap_hwmod_class dra7xx_gmac_hwmod_class = {
.name = "gmac",
.sysc = &dra7xx_gmac_sysc,
};
static struct omap_hwmod dra7xx_gmac_hwmod = {
.name = "gmac",
.class = &dra7xx_gmac_hwmod_class,
.clkdm_name = "gmac_clkdm",
.flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
.main_clk = "dpll_gmac_ck",
.mpu_rt_idx = 1,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_GMAC_GMAC_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* 'mdio' class
*/
static struct omap_hwmod_class dra7xx_mdio_hwmod_class = {
.name = "davinci_mdio",
};
static struct omap_hwmod dra7xx_mdio_hwmod = {
.name = "davinci_mdio",
.class = &dra7xx_mdio_hwmod_class,
.clkdm_name = "gmac_clkdm",
.main_clk = "dpll_gmac_ck",
};
/*
* 'dcan' class
*
@ -1046,281 +996,6 @@ static struct omap_hwmod dra7xx_mailbox13_hwmod = {
},
};
/*
* 'mcspi' class
*
*/
static struct omap_hwmod_class_sysconfig dra7xx_mcspi_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
};
static struct omap_hwmod_class dra7xx_mcspi_hwmod_class = {
.name = "mcspi",
.sysc = &dra7xx_mcspi_sysc,
};
/* mcspi1 */
static struct omap_hwmod dra7xx_mcspi1_hwmod = {
.name = "mcspi1",
.class = &dra7xx_mcspi_hwmod_class,
.clkdm_name = "l4per_clkdm",
.main_clk = "func_48m_fclk",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/* mcspi2 */
static struct omap_hwmod dra7xx_mcspi2_hwmod = {
.name = "mcspi2",
.class = &dra7xx_mcspi_hwmod_class,
.clkdm_name = "l4per_clkdm",
.main_clk = "func_48m_fclk",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/* mcspi3 */
static struct omap_hwmod dra7xx_mcspi3_hwmod = {
.name = "mcspi3",
.class = &dra7xx_mcspi_hwmod_class,
.clkdm_name = "l4per_clkdm",
.main_clk = "func_48m_fclk",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/* mcspi4 */
static struct omap_hwmod dra7xx_mcspi4_hwmod = {
.name = "mcspi4",
.class = &dra7xx_mcspi_hwmod_class,
.clkdm_name = "l4per_clkdm",
.main_clk = "func_48m_fclk",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* 'mcasp' class
*
*/
static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = {
.rev_offs = 0,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type3,
};
static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
.name = "mcasp",
.sysc = &dra7xx_mcasp_sysc,
};
/* mcasp1 */
static struct omap_hwmod_opt_clk mcasp1_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp1_ahclkx_mux" },
{ .role = "ahclkr", .clk = "mcasp1_ahclkr_mux" },
};
static struct omap_hwmod dra7xx_mcasp1_hwmod = {
.name = "mcasp1",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "ipu_clkdm",
.main_clk = "mcasp1_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_IPU_MCASP1_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_IPU_MCASP1_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp1_opt_clks),
};
/* mcasp2 */
static struct omap_hwmod_opt_clk mcasp2_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp2_ahclkx_mux" },
{ .role = "ahclkr", .clk = "mcasp2_ahclkr_mux" },
};
static struct omap_hwmod dra7xx_mcasp2_hwmod = {
.name = "mcasp2",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "mcasp2_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP2_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER2_MCASP2_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp2_opt_clks),
};
/* mcasp3 */
static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" },
};
static struct omap_hwmod dra7xx_mcasp3_hwmod = {
.name = "mcasp3",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "mcasp3_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp3_opt_clks),
};
/* mcasp4 */
static struct omap_hwmod_opt_clk mcasp4_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp4_ahclkx_mux" },
};
static struct omap_hwmod dra7xx_mcasp4_hwmod = {
.name = "mcasp4",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "mcasp4_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP4_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER2_MCASP4_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp4_opt_clks),
};
/* mcasp5 */
static struct omap_hwmod_opt_clk mcasp5_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp5_ahclkx_mux" },
};
static struct omap_hwmod dra7xx_mcasp5_hwmod = {
.name = "mcasp5",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "mcasp5_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP5_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER2_MCASP5_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp5_opt_clks),
};
/* mcasp6 */
static struct omap_hwmod_opt_clk mcasp6_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp6_ahclkx_mux" },
};
static struct omap_hwmod dra7xx_mcasp6_hwmod = {
.name = "mcasp6",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "mcasp6_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP6_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER2_MCASP6_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp6_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp6_opt_clks),
};
/* mcasp7 */
static struct omap_hwmod_opt_clk mcasp7_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp7_ahclkx_mux" },
};
static struct omap_hwmod dra7xx_mcasp7_hwmod = {
.name = "mcasp7",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "mcasp7_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP7_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER2_MCASP7_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp7_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp7_opt_clks),
};
/* mcasp8 */
static struct omap_hwmod_opt_clk mcasp8_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp8_ahclkx_mux" },
};
static struct omap_hwmod dra7xx_mcasp8_hwmod = {
.name = "mcasp8",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "mcasp8_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP8_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER2_MCASP8_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp8_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp8_opt_clks),
};
/*
* 'mpu' class
*
@ -2303,19 +1978,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if dra7xx_l4_per2__cpgmac0 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_gmac_hwmod,
.clk = "dpll_gmac_ck",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if dra7xx_gmac__mdio = {
.master = &dra7xx_gmac_hwmod,
.slave = &dra7xx_mdio_hwmod,
.user = OCP_USER_MPU,
};
/* l4_wkup -> dcan1 */
static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = {
.master = &dra7xx_l4_wkup_hwmod,
@ -2412,94 +2074,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__sha0 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp1 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp1 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp1_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> mcasp1 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp1 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_mcasp1_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp2 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp2 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp2_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> mcasp2 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp2 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_mcasp2_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp3 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp3_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> mcasp3 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_mcasp3_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp4 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp4 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp4_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp5 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp5 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp5_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp6 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp6 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp6_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp7 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp7 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp7_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp8 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp8 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp8_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per1 -> elm */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
.master = &dra7xx_l4_per1_hwmod,
@ -2628,38 +2202,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox13 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per1 -> mcspi1 */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi1 = {
.master = &dra7xx_l4_per1_hwmod,
.slave = &dra7xx_mcspi1_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per1 -> mcspi2 */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi2 = {
.master = &dra7xx_l4_per1_hwmod,
.slave = &dra7xx_mcspi2_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per1 -> mcspi3 */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi3 = {
.master = &dra7xx_l4_per1_hwmod,
.slave = &dra7xx_mcspi3_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per1 -> mcspi4 */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi4 = {
.master = &dra7xx_l4_per1_hwmod,
.slave = &dra7xx_mcspi4_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> mpu */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
.master = &dra7xx_l4_cfg_hwmod,
@ -3021,19 +2563,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_wkup__ctrl_module_wkup,
&dra7xx_l4_wkup__dcan1,
&dra7xx_l4_per2__dcan2,
&dra7xx_l4_per2__cpgmac0,
&dra7xx_l4_per2__mcasp1,
&dra7xx_l3_main_1__mcasp1,
&dra7xx_l4_per2__mcasp2,
&dra7xx_l3_main_1__mcasp2,
&dra7xx_l4_per2__mcasp3,
&dra7xx_l3_main_1__mcasp3,
&dra7xx_l4_per2__mcasp4,
&dra7xx_l4_per2__mcasp5,
&dra7xx_l4_per2__mcasp6,
&dra7xx_l4_per2__mcasp7,
&dra7xx_l4_per2__mcasp8,
&dra7xx_gmac__mdio,
&dra7xx_l4_cfg__dma_system,
&dra7xx_l3_main_1__tpcc,
&dra7xx_l3_main_1__tptc0,
@ -3060,10 +2589,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per3__mailbox11,
&dra7xx_l4_per3__mailbox12,
&dra7xx_l4_per3__mailbox13,
&dra7xx_l4_per1__mcspi1,
&dra7xx_l4_per1__mcspi2,
&dra7xx_l4_per1__mcspi3,
&dra7xx_l4_per1__mcspi4,
&dra7xx_l4_cfg__mpu,
&dra7xx_l4_cfg__ocp2scp1,
&dra7xx_l4_cfg__ocp2scp3,

1
arch/arm/plat-samsung/watchdog-reset.c
View File

@ -62,6 +62,7 @@ void samsung_wdt_reset(void)
#ifdef CONFIG_OF
static const struct of_device_id s3c2410_wdt_match[] = {
{ .compatible = "samsung,s3c2410-wdt" },
{ .compatible = "samsung,s3c6410-wdt" },
{},
};

1
arch/arm64/boot/dts/marvell/Makefile
View File

@ -2,6 +2,7 @@
# Mvebu SoC Family
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb

840
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts Normal file
View File

@ -0,0 +1,840 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for CZ.NIC Turris Mox Board
* 2019 by Marek Behun <marek.behun@nic.cz>
*/
/dts-v1/;
#include <dt-bindings/bus/moxtet.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "armada-372x.dtsi"
/ {
model = "CZ.NIC Turris Mox Board";
compatible = "cznic,turris-mox", "marvell,armada3720",
"marvell,armada3710";
aliases {
spi0 = &spi0;
ethernet1 = &eth1;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
leds {
compatible = "gpio-leds";
red {
label = "mox:red:activity";
gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
exp_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
};
usb3_phy: usb3-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&exp_usb3_vbus>;
};
vsdc_reg: vsdc-reg {
compatible = "regulator-gpio";
regulator-name = "vsdc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
states = <1800000 0x1
3300000 0x0>;
enable-active-high;
};
vsdio_reg: vsdio-reg {
compatible = "regulator-gpio";
regulator-name = "vsdio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
states = <1800000 0x1
3300000 0x0>;
enable-active-high;
};
sdhci1_pwrseq: sdhci1-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
status = "okay";
};
sfp: sfp {
compatible = "sff,sfp+";
i2c-bus = <&i2c0>;
los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
/* enabled by U-Boot if SFP module is present */
status = "disabled";
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <100000>;
status = "okay";
rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
};
};
&pcie_reset_pins {
function = "gpio";
};
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
status = "okay";
max-link-speed = <2>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
phys = <&comphy1 0>;
/* enabled by U-Boot if PCIe module is present */
status = "disabled";
};
&uart0 {
status = "okay";
};
&eth0 {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii-id";
phy = <&phy1>;
status = "okay";
};
&eth1 {
phy-mode = "2500base-x";
managed = "in-band-status";
phys = <&comphy0 1>;
};
&sdhci0 {
wp-inverted;
bus-width = <4>;
cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
vqmmc-supply = <&vsdc_reg>;
marvell,pad-type = "sd";
status = "okay";
};
&sdhci1 {
pinctrl-names = "default";
pinctrl-0 = <&sdio_pins>;
non-removable;
bus-width = <4>;
marvell,pad-type = "sd";
vqmmc-supply = <&vsdio_reg>;
mmc-pwrseq = <&sdhci1_pwrseq>;
status = "okay";
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
assigned-clocks = <&nb_periph_clk 7>;
assigned-clock-parents = <&tbg 1>;
assigned-clock-rates = <20000000>;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "secure-firmware";
reg = <0x0 0x20000>;
};
partition@20000 {
label = "u-boot";
reg = <0x20000 0x160000>;
};
partition@180000 {
label = "u-boot-env";
reg = <0x180000 0x10000>;
};
partition@190000 {
label = "Rescue system";
reg = <0x190000 0x660000>;
};
partition@7f0000 {
label = "dtb";
reg = <0x7f0000 0x10000>;
};
};
};
moxtet: moxtet@1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "cznic,moxtet";
reg = <1>;
reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
spi-max-frequency = <10000000>;
spi-cpol;
spi-cpha;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gpiosb>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
status = "okay";
moxtet_sfp: gpio@0 {
compatible = "cznic,moxtet-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
status = "disabled";
};
};
};
&usb2 {
status = "okay";
};
&usb3 {
status = "okay";
phys = <&comphy2 0>;
usb-phy = <&usb3_phy>;
};
&mdio {
pinctrl-names = "default";
pinctrl-0 = <&smi_pins>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
/* switch nodes are enabled by U-Boot if modules are present */
switch0@10 {
compatible = "marvell,mv88e6190";
reg = <0x10 0>;
dsa,member = <0 0>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_PERIDOT(0)>;
status = "disabled";
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch0phy1: switch0phy1@1 {
reg = <0x1>;
};
switch0phy2: switch0phy2@2 {
reg = <0x2>;
};
switch0phy3: switch0phy3@3 {
reg = <0x3>;
};
switch0phy4: switch0phy4@4 {
reg = <0x4>;
};
switch0phy5: switch0phy5@5 {
reg = <0x5>;
};
switch0phy6: switch0phy6@6 {
reg = <0x6>;
};
switch0phy7: switch0phy7@7 {
reg = <0x7>;
};
switch0phy8: switch0phy8@8 {
reg = <0x8>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <0x1>;
label = "lan1";
phy-handle = <&switch0phy1>;
};
port@2 {
reg = <0x2>;
label = "lan2";
phy-handle = <&switch0phy2>;
};
port@3 {
reg = <0x3>;
label = "lan3";
phy-handle = <&switch0phy3>;
};
port@4 {
reg = <0x4>;
label = "lan4";
phy-handle = <&switch0phy4>;
};
port@5 {
reg = <0x5>;
label = "lan5";
phy-handle = <&switch0phy5>;
};
port@6 {
reg = <0x6>;
label = "lan6";
phy-handle = <&switch0phy6>;
};
port@7 {
reg = <0x7>;
label = "lan7";
phy-handle = <&switch0phy7>;
};
port@8 {
reg = <0x8>;
label = "lan8";
phy-handle = <&switch0phy8>;
};
port@9 {
reg = <0x9>;
label = "cpu";
ethernet = <&eth1>;
phy-mode = "2500base-x";
managed = "in-band-status";
};
switch0port10: port@a {
reg = <0xa>;
label = "dsa";
phy-mode = "2500base-x";
managed = "in-band-status";
link = <&switch1port9 &switch2port9>;
status = "disabled";
};
port-sfp@a {
reg = <0xa>;
label = "sfp";
sfp = <&sfp>;
phy-mode = "sgmii";
managed = "in-band-status";
status = "disabled";
};
};
};
switch0@2 {
compatible = "marvell,mv88e6085";
reg = <0x2 0>;
dsa,member = <0 0>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_TOPAZ>;
status = "disabled";
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch0phy1_topaz: switch0phy1@11 {
reg = <0x11>;
};
switch0phy2_topaz: switch0phy2@12 {
reg = <0x12>;
};
switch0phy3_topaz: switch0phy3@13 {
reg = <0x13>;
};
switch0phy4_topaz: switch0phy4@14 {
reg = <0x14>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <0x1>;
label = "lan1";
phy-handle = <&switch0phy1_topaz>;
};
port@2 {
reg = <0x2>;
label = "lan2";
phy-handle = <&switch0phy2_topaz>;
};
port@3 {
reg = <0x3>;
label = "lan3";
phy-handle = <&switch0phy3_topaz>;
};
port@4 {
reg = <0x4>;
label = "lan4";
phy-handle = <&switch0phy4_topaz>;
};
port@5 {
reg = <0x5>;
label = "cpu";
phy-mode = "2500base-x";
managed = "in-band-status";
ethernet = <&eth1>;
};
};
};
switch1@11 {
compatible = "marvell,mv88e6190";
reg = <0x11 0>;
dsa,member = <0 1>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_PERIDOT(1)>;
status = "disabled";
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch1phy1: switch1phy1@1 {
reg = <0x1>;
};
switch1phy2: switch1phy2@2 {
reg = <0x2>;
};
switch1phy3: switch1phy3@3 {
reg = <0x3>;
};
switch1phy4: switch1phy4@4 {
reg = <0x4>;
};
switch1phy5: switch1phy5@5 {
reg = <0x5>;
};
switch1phy6: switch1phy6@6 {
reg = <0x6>;
};
switch1phy7: switch1phy7@7 {
reg = <0x7>;
};
switch1phy8: switch1phy8@8 {
reg = <0x8>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <0x1>;
label = "lan9";
phy-handle = <&switch1phy1>;
};
port@2 {
reg = <0x2>;
label = "lan10";
phy-handle = <&switch1phy2>;
};
port@3 {
reg = <0x3>;
label = "lan11";
phy-handle = <&switch1phy3>;
};
port@4 {
reg = <0x4>;
label = "lan12";
phy-handle = <&switch1phy4>;
};
port@5 {
reg = <0x5>;
label = "lan13";
phy-handle = <&switch1phy5>;
};
port@6 {
reg = <0x6>;
label = "lan14";
phy-handle = <&switch1phy6>;
};
port@7 {
reg = <0x7>;
label = "lan15";
phy-handle = <&switch1phy7>;
};
port@8 {
reg = <0x8>;
label = "lan16";
phy-handle = <&switch1phy8>;
};
switch1port9: port@9 {
reg = <0x9>;
label = "dsa";
phy-mode = "2500base-x";
managed = "in-band-status";
link = <&switch0port10>;
};
switch1port10: port@a {
reg = <0xa>;
label = "dsa";
phy-mode = "2500base-x";
managed = "in-band-status";
link = <&switch2port9>;
status = "disabled";
};
port-sfp@a {
reg = <0xa>;
label = "sfp";
sfp = <&sfp>;
phy-mode = "sgmii";
managed = "in-band-status";
status = "disabled";
};
};
};
switch1@2 {
compatible = "marvell,mv88e6085";
reg = <0x2 0>;
dsa,member = <0 1>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_TOPAZ>;
status = "disabled";
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch1phy1_topaz: switch1phy1@11 {
reg = <0x11>;
};
switch1phy2_topaz: switch1phy2@12 {
reg = <0x12>;
};
switch1phy3_topaz: switch1phy3@13 {
reg = <0x13>;
};
switch1phy4_topaz: switch1phy4@14 {
reg = <0x14>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <0x1>;
label = "lan9";
phy-handle = <&switch1phy1_topaz>;
};
port@2 {
reg = <0x2>;
label = "lan10";
phy-handle = <&switch1phy2_topaz>;
};
port@3 {
reg = <0x3>;
label = "lan11";
phy-handle = <&switch1phy3_topaz>;
};
port@4 {
reg = <0x4>;
label = "lan12";
phy-handle = <&switch1phy4_topaz>;
};
port@5 {
reg = <0x5>;
label = "dsa";
phy-mode = "2500base-x";
managed = "in-band-status";
link = <&switch0port10>;
};
};
};
switch2@12 {
compatible = "marvell,mv88e6190";
reg = <0x12 0>;
dsa,member = <0 2>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_PERIDOT(2)>;
status = "disabled";
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch2phy1: switch2phy1@1 {
reg = <0x1>;
};
switch2phy2: switch2phy2@2 {
reg = <0x2>;
};
switch2phy3: switch2phy3@3 {
reg = <0x3>;
};
switch2phy4: switch2phy4@4 {
reg = <0x4>;
};
switch2phy5: switch2phy5@5 {
reg = <0x5>;
};
switch2phy6: switch2phy6@6 {
reg = <0x6>;
};
switch2phy7: switch2phy7@7 {
reg = <0x7>;
};
switch2phy8: switch2phy8@8 {
reg = <0x8>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <0x1>;
label = "lan17";
phy-handle = <&switch2phy1>;
};
port@2 {
reg = <0x2>;
label = "lan18";
phy-handle = <&switch2phy2>;
};
port@3 {
reg = <0x3>;
label = "lan19";
phy-handle = <&switch2phy3>;
};
port@4 {
reg = <0x4>;
label = "lan20";
phy-handle = <&switch2phy4>;
};
port@5 {
reg = <0x5>;
label = "lan21";
phy-handle = <&switch2phy5>;
};
port@6 {
reg = <0x6>;
label = "lan22";
phy-handle = <&switch2phy6>;
};
port@7 {
reg = <0x7>;
label = "lan23";
phy-handle = <&switch2phy7>;
};
port@8 {
reg = <0x8>;
label = "lan24";
phy-handle = <&switch2phy8>;
};
switch2port9: port@9 {
reg = <0x9>;
label = "dsa";
phy-mode = "2500base-x";
managed = "in-band-status";
link = <&switch1port10 &switch0port10>;
};
port-sfp@a {
reg = <0xa>;
label = "sfp";
sfp = <&sfp>;
phy-mode = "sgmii";
managed = "in-band-status";
status = "disabled";
};
};
};
switch2@2 {
compatible = "marvell,mv88e6085";
reg = <0x2 0>;
dsa,member = <0 2>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_TOPAZ>;
status = "disabled";
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch2phy1_topaz: switch2phy1@11 {
reg = <0x11>;
};
switch2phy2_topaz: switch2phy2@12 {
reg = <0x12>;
};
switch2phy3_topaz: switch2phy3@13 {
reg = <0x13>;
};
switch2phy4_topaz: switch2phy4@14 {
reg = <0x14>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <0x1>;
label = "lan17";
phy-handle = <&switch2phy1_topaz>;
};
port@2 {
reg = <0x2>;
label = "lan18";
phy-handle = <&switch2phy2_topaz>;
};
port@3 {
reg = <0x3>;
label = "lan19";
phy-handle = <&switch2phy3_topaz>;
};
port@4 {
reg = <0x4>;
label = "lan20";
phy-handle = <&switch2phy4_topaz>;
};
port@5 {
reg = <0x5>;
label = "dsa";
phy-mode = "2500base-x";
managed = "in-band-status";
link = <&switch1port10 &switch0port10>;
};
};
};
};

5
arch/arm64/boot/dts/marvell/armada-37xx.dtsi
View File

@ -215,6 +215,11 @@ spi_quad_pins: spi-quad-pins {
function = "spi";
};
spi_cs1_pins: spi-cs1-pins {
groups = "spi_cs1";
function = "spi";
};
i2c1_pins: i2c1-pins {
groups = "i2c1";
function = "i2c";

52
arch/arm64/boot/dts/ti/k3-am65-main.dtsi
View File

@ -42,7 +42,7 @@ gic500: interrupt-controller@1800000 {
*/
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
gic_its: gic-its@18200000 {
gic_its: gic-its@1820000 {
compatible = "arm,gic-v3-its";
reg = <0x00 0x01820000 0x00 0x10000>;
socionext,synquacer-pre-its = <0x1000000 0x400000>;
@ -67,7 +67,7 @@ serdes0: serdes@900000 {
reg = <0x0 0x900000 0x0 0x2000>;
reg-names = "serdes";
#phy-cells = <2>;
power-domains = <&k3_pds 153>;
power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
@ -82,7 +82,7 @@ serdes1: serdes@910000 {
reg = <0x0 0x910000 0x0 0x2000>;
reg-names = "serdes";
#phy-cells = <2>;
power-domains = <&k3_pds 154>;
power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
@ -100,7 +100,7 @@ main_uart0: serial@2800000 {
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 146>;
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
};
main_uart1: serial@2810000 {
@ -110,7 +110,7 @@ main_uart1: serial@2810000 {
reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
power-domains = <&k3_pds 147>;
power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
};
main_uart2: serial@2820000 {
@ -120,7 +120,7 @@ main_uart2: serial@2820000 {
reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
power-domains = <&k3_pds 148>;
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
};
main_pmx0: pinmux@11c000 {
@ -147,7 +147,7 @@ main_i2c0: i2c@2000000 {
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 110 1>;
power-domains = <&k3_pds 110>;
power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
};
main_i2c1: i2c@2010000 {
@ -158,7 +158,7 @@ main_i2c1: i2c@2010000 {
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 111 1>;
power-domains = <&k3_pds 111>;
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
};
main_i2c2: i2c@2020000 {
@ -169,7 +169,7 @@ main_i2c2: i2c@2020000 {
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 112 1>;
power-domains = <&k3_pds 112>;
power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
};
main_i2c3: i2c@2030000 {
@ -180,14 +180,14 @@ main_i2c3: i2c@2030000 {
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 113 1>;
power-domains = <&k3_pds 113>;
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
};
ecap0: pwm@3100000 {
compatible = "ti,am654-ecap", "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x0 0x03100000 0x0 0x60>;
power-domains = <&k3_pds 39>;
power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 39 0>;
clock-names = "fck";
};
@ -197,7 +197,7 @@ main_spi0: spi@2100000 {
reg = <0x0 0x2100000 0x0 0x400>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 137 1>;
power-domains = <&k3_pds 137>;
power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
@ -207,7 +207,7 @@ main_spi1: spi@2110000 {
reg = <0x0 0x2110000 0x0 0x400>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 138 1>;
power-domains = <&k3_pds 138>;
power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
assigned-clocks = <&k3_clks 137 1>;
@ -219,7 +219,7 @@ main_spi2: spi@2120000 {
reg = <0x0 0x2120000 0x0 0x400>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 139 1>;
power-domains = <&k3_pds 139>;
power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
@ -229,7 +229,7 @@ main_spi3: spi@2130000 {
reg = <0x0 0x2130000 0x0 0x400>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 140 1>;
power-domains = <&k3_pds 140>;
power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
@ -239,7 +239,7 @@ main_spi4: spi@2140000 {
reg = <0x0 0x2140000 0x0 0x400>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 141 1>;
power-domains = <&k3_pds 141>;
power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
@ -247,7 +247,7 @@ main_spi4: spi@2140000 {
sdhci0: sdhci@4f80000 {
compatible = "ti,am654-sdhci-5.1";
reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
power-domains = <&k3_pds 47>;
power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
clock-names = "clk_ahb", "clk_xin";
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
@ -306,7 +306,7 @@ dwc3_0: dwc3@4000000 {
ranges = <0x0 0x0 0x4000000 0x20000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
power-domains = <&k3_pds 151>;
power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
<&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
@ -345,7 +345,7 @@ dwc3_1: dwc3@4020000 {
ranges = <0x0 0x0 0x4020000 0x20000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
power-domains = <&k3_pds 152>;
power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 152 2>;
assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
@ -413,6 +413,12 @@ inta_main_udmass: interrupt-controller@33d00000 {
ti,sci-rm-range-vint = <0x0>;
ti,sci-rm-range-global-event = <0x1>;
};
hwspinlock: spinlock@30e00000 {
compatible = "ti,am654-hwspinlock";
reg = <0x00 0x30e00000 0x00 0x1000>;
#hwlock-cells = <1>;
};
};
main_gpio0: main_gpio0@600000 {
@ -451,7 +457,7 @@ pcie0_rc: pcie@5500000 {
compatible = "ti,am654-pcie-rc";
reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
reg-names = "app", "dbics", "config", "atu";
power-domains = <&k3_pds 120>;
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000
@ -470,7 +476,7 @@ pcie0_ep: pcie-ep@5500000 {
compatible = "ti,am654-pcie-ep";
reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
reg-names = "app", "dbics", "addr_space", "atu";
power-domains = <&k3_pds 120>;
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
ti,syscon-pcie-mode = <&pcie0_mode>;
num-ib-windows = <16>;
num-ob-windows = <16>;
@ -483,7 +489,7 @@ pcie1_rc: pcie@5600000 {
compatible = "ti,am654-pcie-rc";
reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
reg-names = "app", "dbics", "config", "atu";
power-domains = <&k3_pds 121>;
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000
@ -502,7 +508,7 @@ pcie1_ep: pcie-ep@5600000 {
compatible = "ti,am654-pcie-ep";
reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
reg-names = "app", "dbics", "addr_space", "atu";
power-domains = <&k3_pds 121>;
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
ti,syscon-pcie-mode = <&pcie1_mode>;
num-ib-windows = <16>;
num-ob-windows = <16>;

10
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
View File

@ -14,7 +14,7 @@ mcu_uart0: serial@40a00000 {
interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
power-domains = <&k3_pds 149>;
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
};
mcu_ram: sram@41c00000 {
@ -33,7 +33,7 @@ mcu_i2c0: i2c@40b00000 {
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 114 1>;
power-domains = <&k3_pds 114>;
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
};
mcu_spi0: spi@40300000 {
@ -41,7 +41,7 @@ mcu_spi0: spi@40300000 {
reg = <0x0 0x40300000 0x0 0x400>;
interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 142 1>;
power-domains = <&k3_pds 142>;
power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
@ -51,7 +51,7 @@ mcu_spi1: spi@40310000 {
reg = <0x0 0x40310000 0x0 0x400>;
interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 143 1>;
power-domains = <&k3_pds 143>;
power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
@ -61,7 +61,7 @@ mcu_spi2: spi@40320000 {
reg = <0x0 0x40320000 0x0 0x400>;
interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 144 1>;
power-domains = <&k3_pds 144>;
power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};

6
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
View File

@ -20,7 +20,7 @@ dmsc: dmsc {
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <1>;
#power-domain-cells = <2>;
};
k3_clks: clocks {
@ -50,7 +50,7 @@ wkup_uart0: serial@42300000 {
interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 150>;
power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
};
wkup_i2c0: i2c@42120000 {
@ -61,7 +61,7 @@ wkup_i2c0: i2c@42120000 {
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 115 1>;
power-domains = <&k3_pds 115>;
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
};
intr_wkup_gpio: interrupt-controller2 {

1
arch/arm64/boot/dts/ti/k3-am65.dtsi
View File

@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/k3.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
/ {
model = "Texas Instruments K3 AM654 SoC";

1
arch/arm64/boot/dts/ti/k3-am654-base-board.dts
View File

@ -151,6 +151,7 @@ &wkup_uart0 {
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
};
&wkup_i2c0 {

69
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
View File

@ -6,12 +6,49 @@
/dts-v1/;
#include "k3-j721e-som-p0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
chosen {
stdout-path = "serial2:115200n8";
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
};
gpio_keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
sw10: sw10 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
};
sw11: sw11 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
};
};
};
&main_pmx0 {
sw10_button_pins_default: sw10_button_pins_default {
pinctrl-single,pins = <
J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
>;
};
};
&wkup_pmx0 {
sw11_button_pins_default: sw11_button_pins_default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
>;
};
};
&wkup_uart0 {
@ -19,6 +56,10 @@ &wkup_uart0 {
status = "disabled";
};
&main_uart0 {
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
};
&main_uart3 {
/* UART not brought out */
status = "disabled";
@ -48,3 +89,31 @@ &main_uart9 {
/* UART not brought out */
status = "disabled";
};
&main_gpio2 {
status = "disabled";
};
&main_gpio3 {
status = "disabled";
};
&main_gpio4 {
status = "disabled";
};
&main_gpio5 {
status = "disabled";
};
&main_gpio6 {
status = "disabled";
};
&main_gpio7 {
status = "disabled";
};
&wkup_gpio1 {
status = "disabled";
};

160
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
View File

@ -31,7 +31,7 @@ gic500: interrupt-controller@1800000 {
/* vcpumntirq: virtual CPU interface maintenance interrupt */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
gic_its: gic-its@18200000 {
gic_its: gic-its@1820000 {
compatible = "arm,gic-v3-its";
reg = <0x00 0x01820000 0x00 0x10000>;
socionext,synquacer-pre-its = <0x1000000 0x400000>;
@ -89,6 +89,12 @@ main_udmass_inta: interrupt-controller@33d00000 {
ti,sci-rm-range-vint = <0xa>;
ti,sci-rm-range-global-event = <0xd>;
};
hwspinlock: spinlock@30e00000 {
compatible = "ti,am654-hwspinlock";
reg = <0x00 0x30e00000 0x00 0x1000>;
#hwlock-cells = <1>;
};
};
secure_proxy_main: mailbox@32c00000 {
@ -119,7 +125,7 @@ main_uart0: serial@2800000 {
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 146>;
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 146 0>;
clock-names = "fclk";
};
@ -132,7 +138,7 @@ main_uart1: serial@2810000 {
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 278>;
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 278 0>;
clock-names = "fclk";
};
@ -145,7 +151,7 @@ main_uart2: serial@2820000 {
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 279>;
power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 279 0>;
clock-names = "fclk";
};
@ -158,7 +164,7 @@ main_uart3: serial@2830000 {
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 280>;
power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 280 0>;
clock-names = "fclk";
};
@ -171,7 +177,7 @@ main_uart4: serial@2840000 {
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 281>;
power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 281 0>;
clock-names = "fclk";
};
@ -184,7 +190,7 @@ main_uart5: serial@2850000 {
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 282>;
power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 282 0>;
clock-names = "fclk";
};
@ -197,7 +203,7 @@ main_uart6: serial@2860000 {
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 283>;
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 283 0>;
clock-names = "fclk";
};
@ -210,7 +216,7 @@ main_uart7: serial@2870000 {
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 284>;
power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 284 0>;
clock-names = "fclk";
};
@ -223,7 +229,7 @@ main_uart8: serial@2880000 {
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 285>;
power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 285 0>;
clock-names = "fclk";
};
@ -236,8 +242,140 @@ main_uart9: serial@2890000 {
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 286>;
power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 286 0>;
clock-names = "fclk";
};
main_gpio0: gpio@600000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x00600000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <105 0>, <105 1>, <105 2>, <105 3>,
<105 4>, <105 5>, <105 6>, <105 7>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 105 0>;
clock-names = "gpio";
};
main_gpio1: gpio@601000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x00601000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <106 0>, <106 1>, <106 2>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 106 0>;
clock-names = "gpio";
};
main_gpio2: gpio@610000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x00610000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <107 0>, <107 1>, <107 2>, <107 3>,
<107 4>, <107 5>, <107 6>, <107 7>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 107 0>;
clock-names = "gpio";
};
main_gpio3: gpio@611000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x00611000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <108 0>, <108 1>, <108 2>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 108 0>;
clock-names = "gpio";
};
main_gpio4: gpio@620000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x00620000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <109 0>, <109 1>, <109 2>, <109 3>,
<109 4>, <109 5>, <109 6>, <109 7>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 109 0>;
clock-names = "gpio";
};
main_gpio5: gpio@621000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x00621000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <110 0>, <110 1>, <110 2>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 110 0>;
clock-names = "gpio";
};
main_gpio6: gpio@630000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x00630000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <111 0>, <111 1>, <111 2>, <111 3>,
<111 4>, <111 5>, <111 6>, <111 7>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 111 0>;
clock-names = "gpio";
};
main_gpio7: gpio@631000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x00631000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <112 0>, <112 1>, <112 2>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 112 0>;
clock-names = "gpio";
};
};

40
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
View File

@ -20,7 +20,7 @@ dmsc: dmsc@44083000 {
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <1>;
#power-domain-cells = <2>;
};
k3_clks: clocks {
@ -59,7 +59,7 @@ wkup_uart0: serial@42300000 {
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 287>;
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 287 0>;
clock-names = "fclk";
};
@ -72,7 +72,7 @@ mcu_uart0: serial@40a00000 {
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
power-domains = <&k3_pds 149>;
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 149 0>;
clock-names = "fclk";
};
@ -87,4 +87,38 @@ wkup_gpio_intr: interrupt-controller2 {
ti,sci-dst-id = <14>;
ti,sci-rm-range-girq = <0x5>;
};
wkup_gpio0: gpio@42110000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x42110000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&wkup_gpio_intr>;
interrupts = <113 0>, <113 1>, <113 2>,
<113 3>, <113 4>, <113 5>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <84>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 113 0>;
clock-names = "gpio";
};
wkup_gpio1: gpio@42100000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x0 0x42100000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&wkup_gpio_intr>;
interrupts = <114 0>, <114 1>, <114 2>,
<114 3>, <114 4>, <114 5>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <84>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 114 0>;
clock-names = "gpio";
};
};

1
arch/arm64/boot/dts/ti/k3-j721e.dtsi
View File

@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/k3.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
/ {
model = "Texas Instruments K3 J721E SoC";

101
drivers/bus/ti-sysc.c
View File

@ -1,14 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
* ti-sysc.c - Texas Instruments sysc interconnect target driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/io.h>
@ -62,18 +54,26 @@ static const char * const clock_names[SYSC_MAX_CLOCKS] = {
* @module_size: size of the interconnect target module
* @module_va: virtual address of the interconnect target module
* @offsets: register offsets from module base
* @mdata: ti-sysc to hwmod translation data for a module
* @clocks: clocks used by the interconnect target module
* @clock_roles: clock role names for the found clocks
* @nr_clocks: number of clocks used by the interconnect target module
* @rsts: resets used by the interconnect target module
* @legacy_mode: configured for legacy mode if set
* @cap: interconnect target module capabilities
* @cfg: interconnect target module configuration
* @cookie: data used by legacy platform callbacks
* @name: name if available
* @revision: interconnect target module revision
* @enabled: sysc runtime enabled status
* @needs_resume: runtime resume needed on resume from suspend
* @child_needs_resume: runtime resume needed for child on resume from suspend
* @disable_on_idle: status flag used for disabling modules with resets
* @idle_work: work structure used to perform delayed idle on a module
* @clk_enable_quirk: module specific clock enable quirk
* @clk_disable_quirk: module specific clock disable quirk
* @reset_done_quirk: module specific reset done quirk
* @module_enable_quirk: module specific enable quirk
*/
struct sysc {
struct device *dev;
@ -95,11 +95,11 @@ struct sysc {
unsigned int enabled:1;
unsigned int needs_resume:1;
unsigned int child_needs_resume:1;
unsigned int disable_on_idle:1;
struct delayed_work idle_work;
void (*clk_enable_quirk)(struct sysc *sysc);
void (*clk_disable_quirk)(struct sysc *sysc);
void (*reset_done_quirk)(struct sysc *sysc);
void (*module_enable_quirk)(struct sysc *sysc);
};
static void sysc_parse_dts_quirks(struct sysc *ddata, struct device_node *np,
@ -503,7 +503,7 @@ static void sysc_clkdm_allow_idle(struct sysc *ddata)
static int sysc_init_resets(struct sysc *ddata)
{
ddata->rsts =
devm_reset_control_get_optional(ddata->dev, "rstctrl");
devm_reset_control_get_optional_shared(ddata->dev, "rstctrl");
if (IS_ERR(ddata->rsts))
return PTR_ERR(ddata->rsts);
@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,
* node but children have "ti,hwmods". These belong to the interconnect
* target node and are managed by this driver.
*/
static int sysc_check_one_child(struct sysc *ddata,
struct device_node *np)
static void sysc_check_one_child(struct sysc *ddata,
struct device_node *np)
{
const char *name;
@ -626,22 +626,14 @@ static int sysc_check_one_child(struct sysc *ddata,
sysc_check_quirk_stdout(ddata, np);
sysc_parse_dts_quirks(ddata, np, true);
return 0;
}
static int sysc_check_children(struct sysc *ddata)
static void sysc_check_children(struct sysc *ddata)
{
struct device_node *child;
int error;
for_each_child_of_node(ddata->dev->of_node, child) {
error = sysc_check_one_child(ddata, child);
if (error)
return error;
}
return 0;
for_each_child_of_node(ddata->dev->of_node, child)
sysc_check_one_child(ddata, child);
}
/*
@ -794,9 +786,7 @@ static int sysc_map_and_check_registers(struct sysc *ddata)
if (error)
return error;
error = sysc_check_children(ddata);
if (error)
return error;
sysc_check_children(ddata);
error = sysc_parse_registers(ddata);
if (error)
@ -940,6 +930,9 @@ static int sysc_enable_module(struct device *dev)
sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
}
if (ddata->module_enable_quirk)
ddata->module_enable_quirk(ddata);
return 0;
}
@ -1031,8 +1024,7 @@ static int __maybe_unused sysc_runtime_suspend_legacy(struct device *dev,
dev_err(dev, "%s: could not idle: %i\n",
__func__, error);
if (ddata->disable_on_idle)
reset_control_assert(ddata->rsts);
reset_control_assert(ddata->rsts);
return 0;
}
@ -1043,8 +1035,7 @@ static int __maybe_unused sysc_runtime_resume_legacy(struct device *dev,
struct ti_sysc_platform_data *pdata;
int error;
if (ddata->disable_on_idle)
reset_control_deassert(ddata->rsts);
reset_control_deassert(ddata->rsts);
pdata = dev_get_platdata(ddata->dev);
if (!pdata)
@ -1091,10 +1082,9 @@ static int __maybe_unused sysc_runtime_suspend(struct device *dev)
ddata->enabled = false;
err_allow_idle:
sysc_clkdm_allow_idle(ddata);
reset_control_assert(ddata->rsts);
if (ddata->disable_on_idle)
reset_control_assert(ddata->rsts);
sysc_clkdm_allow_idle(ddata);
return error;
}
@ -1109,11 +1099,11 @@ static int __maybe_unused sysc_runtime_resume(struct device *dev)
if (ddata->enabled)
return 0;
if (ddata->disable_on_idle)
reset_control_deassert(ddata->rsts);
sysc_clkdm_deny_idle(ddata);
reset_control_deassert(ddata->rsts);
if (sysc_opt_clks_needed(ddata)) {
error = sysc_enable_opt_clocks(ddata);
if (error)
@ -1256,6 +1246,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_MODULE_QUIRK_I2C),
SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffff0f0,
SYSC_MODULE_QUIRK_I2C),
SYSC_QUIRK("gpu", 0x50000000, 0x14, -1, -1, 0x00010201, 0xffffffff, 0),
SYSC_QUIRK("gpu", 0x50000000, 0xfe00, 0xfe10, -1, 0x40000000 , 0xffffffff,
SYSC_MODULE_QUIRK_SGX),
SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
SYSC_MODULE_QUIRK_WDT),
@ -1271,8 +1264,11 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0x4edb1902, 0xffffffff, 0),
SYSC_QUIRK("dmic", 0, 0, 0x10, -1, 0x50010000, 0xffffffff, 0),
SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0),
SYSC_QUIRK("d2d", 0x4a0b6000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
SYSC_QUIRK("d2d", 0x4a0cd000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0),
SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -1, 0, 0, 0),
SYSC_QUIRK("gpu", 0, 0xfe00, 0xfe10, -1, 0x40000000 , 0xffffffff, 0),
SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
SYSC_QUIRK("iss", 0, 0, 0x10, -1, 0x40000101, 0xffffffff, 0),
SYSC_QUIRK("lcdc", 0, 0, 0x54, -1, 0x4f201000, 0xffffffff, 0),
@ -1424,6 +1420,15 @@ static void sysc_clk_disable_quirk_i2c(struct sysc *ddata)
sysc_clk_quirk_i2c(ddata, false);
}
/* 36xx SGX needs a quirk for to bypass OCP IPG interrupt logic */
static void sysc_module_enable_quirk_sgx(struct sysc *ddata)
{
int offset = 0xff08; /* OCP_DEBUG_CONFIG */
u32 val = BIT(31); /* THALIA_INT_BYPASS */
sysc_write(ddata, offset, val);
}
/* Watchdog timer needs a disable sequence after reset */
static void sysc_reset_done_quirk_wdt(struct sysc *ddata)
{
@ -1466,6 +1471,9 @@ static void sysc_init_module_quirks(struct sysc *ddata)
return;
}
if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_WDT)
ddata->reset_done_quirk = sysc_reset_done_quirk_wdt;
}
@ -1532,7 +1540,7 @@ static int sysc_legacy_init(struct sysc *ddata)
*/
static int sysc_rstctrl_reset_deassert(struct sysc *ddata, bool reset)
{
int error, val;
int error;
if (!ddata->rsts)
return 0;
@ -1543,14 +1551,9 @@ static int sysc_rstctrl_reset_deassert(struct sysc *ddata, bool reset)
return error;
}
error = reset_control_deassert(ddata->rsts);
if (error == -EEXIST)
return 0;
reset_control_deassert(ddata->rsts);
error = readx_poll_timeout(reset_control_status, ddata->rsts, val,
val == 0, 100, MAX_MODULE_SOFTRESET_WAIT);
return error;
return 0;
}
/*
@ -1559,12 +1562,11 @@ static int sysc_rstctrl_reset_deassert(struct sysc *ddata, bool reset)
*/
static int sysc_reset(struct sysc *ddata)
{
int sysc_offset, syss_offset, sysc_val, rstval, quirks, error = 0;
int sysc_offset, syss_offset, sysc_val, rstval, error = 0;
u32 sysc_mask, syss_done;
sysc_offset = ddata->offsets[SYSC_SYSCONFIG];
syss_offset = ddata->offsets[SYSC_SYSSTATUS];
quirks = ddata->cfg.quirks;
if (ddata->legacy_mode || sysc_offset < 0 ||
ddata->cap->regbits->srst_shift < 0 ||
@ -2427,6 +2429,10 @@ static int sysc_probe(struct platform_device *pdev)
goto unprepare;
}
/* Balance reset counts */
if (ddata->rsts)
reset_control_assert(ddata->rsts);
sysc_show_registers(ddata);
ddata->dev->type = &sysc_device_type;
@ -2446,9 +2452,6 @@ static int sysc_probe(struct platform_device *pdev)
pm_runtime_put(&pdev->dev);
}
if (!of_get_available_child_count(ddata->dev->of_node))
ddata->disable_on_idle = true;
return 0;
err:

34
drivers/clk/ti/clk-54xx.c
View File

@ -314,6 +314,39 @@ static const struct omap_clkctrl_reg_data omap5_dss_clkctrl_regs[] __initconst =
{ 0 },
};
static const char * const omap5_gpu_core_mux_parents[] __initconst = {
"dpll_core_h14x2_ck",
"dpll_per_h14x2_ck",
NULL,
};
static const char * const omap5_gpu_hyd_mux_parents[] __initconst = {
"dpll_core_h14x2_ck",
"dpll_per_h14x2_ck",
NULL,
};
static const char * const omap5_gpu_sys_clk_parents[] __initconst = {
"sys_clkin",
NULL,
};
static const struct omap_clkctrl_div_data omap5_gpu_sys_clk_data __initconst = {
.max_div = 2,
};
static const struct omap_clkctrl_bit_data omap5_gpu_core_bit_data[] __initconst = {
{ 24, TI_CLK_MUX, omap5_gpu_core_mux_parents, NULL },
{ 25, TI_CLK_MUX, omap5_gpu_hyd_mux_parents, NULL },
{ 26, TI_CLK_DIVIDER, omap5_gpu_sys_clk_parents, &omap5_gpu_sys_clk_data },
{ 0 },
};
static const struct omap_clkctrl_reg_data omap5_gpu_clkctrl_regs[] __initconst = {
{ OMAP5_GPU_CLKCTRL, omap5_gpu_core_bit_data, CLKF_SW_SUP, "gpu_cm:clk:0000:24" },
{ 0 },
};
static const char * const omap5_mmc1_fclk_mux_parents[] __initconst = {
"func_128m_clk",
"dpll_per_m2x2_ck",
@ -470,6 +503,7 @@ const struct omap_clkctrl_data omap5_clkctrl_data[] __initconst = {
{ 0x4a008e20, omap5_l3instr_clkctrl_regs },
{ 0x4a009020, omap5_l4per_clkctrl_regs },
{ 0x4a009420, omap5_dss_clkctrl_regs },
{ 0x4a009520, omap5_gpu_clkctrl_regs },
{ 0x4a009620, omap5_l3init_clkctrl_regs },
{ 0x4ae07920, omap5_wkupaon_clkctrl_regs },
{ 0 },

1
include/dt-bindings/bus/ti-sysc.h
View File

@ -1,3 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* TI sysc interconnect target module defines */
/* Generic sysc found on omap2 and later, also known as type1 */

3
include/dt-bindings/clock/omap5.h
View File

@ -89,6 +89,9 @@
/* dss clocks */
#define OMAP5_DSS_CORE_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20)
/* gpu clocks */
#define OMAP5_GPU_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20)
/* l3init clocks */
#define OMAP5_MMC1_CLKCTRL OMAP5_CLKCTRL_INDEX(0x28)
#define OMAP5_MMC2_CLKCTRL OMAP5_CLKCTRL_INDEX(0x30)

3
include/dt-bindings/pinctrl/k3.h
View File

@ -32,4 +32,7 @@
#define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define J721E_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define J721E_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#endif

8
include/linux/platform_data/ti-sysc.h
View File

@ -1,3 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __TI_SYSC_DATA_H__
#define __TI_SYSC_DATA_H__
@ -47,6 +49,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
#define SYSC_MODULE_QUIRK_SGX BIT(18)
#define SYSC_MODULE_QUIRK_HDQ1W BIT(17)
#define SYSC_MODULE_QUIRK_I2C BIT(16)
#define SYSC_MODULE_QUIRK_WDT BIT(15)
@ -70,7 +73,7 @@ struct sysc_regbits {
/**
* struct sysc_capabilities - capabilities for an interconnect target module
*
* @type: sysc type identifier for the module
* @sysc_mask: bitmask of supported SYSCONFIG register bits
* @regbits: bitmask of SYSCONFIG register bits
* @mod_quirks: bitmask of module specific quirks
@ -85,8 +88,9 @@ struct sysc_capabilities {
/**
* struct sysc_config - configuration for an interconnect target module
* @sysc_val: configured value for sysc register
* @syss_mask: configured mask value for SYSSTATUS register
* @midlemodes: bitmask of supported master idle modes
* @sidlemodes: bitmask of supported master idle modes
* @sidlemodes: bitmask of supported slave idle modes
* @srst_udelay: optional delay needed after OCP soft reset
* @quirks: bitmask of enabled quirks
*/