AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

ARM: STi: STiH415: Add soft reset controller support.

Browse Source 
This patch adds soft reset controller support for STiH415 and adds new
softreset lines required for other device tree nodes in the header file.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
This commit is contained in:
Srinivas Kandagatla 2014-03-11 09:32:49 +00:00
parent 6b7f06cc80
commit fc58fcf6da
3 changed files with 58 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
Documentation/devicetree/bindings/reset/st,sti-softreset.txt Normal file
View File

@ -0,0 +1,46 @@
STMicroelectronics STi family Sysconfig Peripheral SoftReset Controller
=============================================================================
This binding describes a reset controller device that is used to enable and
disable on-chip peripheral controllers such as USB and SATA, using
"softreset" control bits found in the STi family SoC system configuration
registers.
The actual action taken when softreset is asserted is hardware dependent.
However, when asserted it may not be possible to access the hardware's
registers and after an assert/deassert sequence the hardware's previous state
may no longer be valid.
Please refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be "st,<chip>-softreset" example:
"st,stih415-softreset" or "st,stih416-softreset";
- #reset-cells: 1, see below
example:
softreset: softreset-controller {
#reset-cells = <1>;
compatible = "st,stih415-softreset";
};
Specifying softreset control of devices
=======================================
Device nodes should specify the reset channel required in their "resets"
property, containing a phandle to the softreset device node and an
index specifying which channel to use, as described in reset.txt
example:
ethernet0{
resets = <&softreset STIH415_ETH0_SOFTRESET>;
};
Macro definitions for the supported reset channels can be found in:
include/dt-bindings/reset-controller/stih415-resets.h
include/dt-bindings/reset-controller/stih416-resets.h

5
arch/arm/boot/dts/stih415.dtsi
View File

@ -34,6 +34,11 @@ powerdown: powerdown-controller {
compatible = "st,stih415-powerdown";
};
softreset: softreset-controller {
#reset-cells = <1>;
compatible = "st,stih415-softreset";
};
syscfg_sbc: sbc-syscfg@fe600000{
compatible = "st,stih415-sbc-syscfg", "syscon";
reg = <0xfe600000 0xb4>;

7
include/dt-bindings/reset-controller/stih415-resets.h
View File

@ -16,4 +16,11 @@
#define STIH415_SATA1_POWERDOWN 7
#define STIH415_PCIE_POWERDOWN 8
#define STIH415_ETH0_SOFTRESET 0
#define STIH415_ETH1_SOFTRESET 1
#define STIH415_IRB_SOFTRESET 2
#define STIH415_USB0_SOFTRESET 3
#define STIH415_USB1_SOFTRESET 4
#define STIH415_USB2_SOFTRESET 5
#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */