By default 'sdo_limit' is initialized with a default value of '8'
as per spec. This is overridden in cases where a different value is
required. However this is getting reset when snd_hdac_bus_init_chip()
is called again, which happens during runtime PM cycle.
Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()'
function which would be called only once.
Fixes: 67ae482a59 ("ALSA: hda: add member to store ratio for stripe control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_bus_queue_event() and snd_hdac_bus_exec_verb() are used only
internally in HD-audio core. Let's drop the exports and move the
declarations into local.h.
Link: https://lore.kernel.org/r/20200516062854.22141-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stripe control programming is governed by following formula, which is
referenced from the HD Audio specification(Revision 1.0a).
{ ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
Currently above is implemented in snd_hdac_get_stream_stripe_ctl().
This patch introduces a structure member to store the default factor
of '8'. If any HW wants to use a different value, this member can be
easily updated.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1588580176-2801-3-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make W=1 throws a lot of warnings, with multiple misalignments between
function params and their descriptions.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113205638.27338-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now most of the get_response handling became quite similar between
HDA-core and legacy drivers, and the only differences are:
- the handling of extra-long polling delay for some codecs
- the debug message for the stalled communication
and both are worth to share in the common code.
This patch unifies the code into snd_hdac_bus_get_response(), and use
this from the legacy get_response callback. It results in a good
amount of code reduction in the end.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191212191101.19517-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch implements the same logic that was done for the legacy
HD-audio controller driver by the commit 88452da92b ("ALSA: hda: Use
standard waitqueue for RIRB wakeup") to the HDA-core helper code,
too. This makes snd_hdac_bus_get_response() waiting for the response
with bus->rirb_wq instead of polling when bus->polling is false.
It'll save both CPU time and response latency.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191212191101.19517-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HD-audio CORB/RIRB communication was programmed in a way that was
documented in the reference in decades ago, which is essentially a
polling in the waiter side. It's working fine but costs CPU cycles on
some platforms that support only slow communications. Also, for some
platforms that had unreliable communications, we put longer wait time
(2 ms), which accumulate quite long time if you execute many verbs in
a shot (e.g. at the initialization or resume phase).
This patch attempts to improve the situation by introducing the
standard waitqueue in the RIRB waiter side instead of polling. The
test results on my machine show significant improvements. The time
spent for "cat /proc/asound/card*/codec#*" were changed like:
* Intel SKL + Realtek codec
before the patch:
0.00user 0.04system 0:00.10elapsed 40.0%CPU
after the patch:
0.00user 0.01system 0:00.10elapsed 10.0%CPU
* Nvidia GP107GL + Nvidia HDMI codec
before the patch:
0.00user 0.00system 0:02.76elapsed 0.0%CPU
after the patch:
0.00user 0.00system 0:00.01elapsed 17.0%CPU
So, for Intel chips, the total time is same, while the total time is
greatly reduced (from 2.76 to 0.01s) for Nvidia chips.
The only negative data here is the increase of CPU time for Nvidia,
but this is the unavoidable cost for faster wakeups, supposedly.
Link: https://lore.kernel.org/r/20191210145727.22054-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit caa8422d01.
It turned out that this commit caused a regression at shutdown /
reboot, as the synchronize_irq() calls seems blocking the whole
shutdown. Also another part of the change about shuffling the call
order looks suspicious; the azx_stop_chip() call disables the CORB /
RIRB while the others may still need the CORB/RIRB update.
Since the original commit itself was a cargo-fix, let's revert the
whole patch.
Fixes: caa8422d01 ("ALSA: hda: Flush interrupts on disabling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333
BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HD-audio core allocates and releases pages via driver's specific
dma_alloc_pages and dma_free_pages ops defined in bus->io_ops. This
was because some platforms require the uncached pages and the handling
of page flags had to be done locally in the driver code.
Since the recent change in ALSA core memory allocator, we can simply
pass SNDRV_DMA_TYPE_DEV_UC for the uncached pages, and the only
difference became about this type to be passed to the core allocator.
That is, it's good time for cleaning up the mess.
This patch changes the allocation code in HD-audio core to call the
core allocator directly so that we get rid of dma_alloc_pages and
dma_free_pages io_ops. If a driver needs the uncached pages, it has
to set bus->dma_type right after the bus initialization.
This is merely a code refactoring and shouldn't bring any behavior
changes.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
+z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
=n/HQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To save power, the hda hdmi driver in ASoC invokes snd_hdac_ext_bus_link_put
to disable CORB/RIRB buffers DMA if there is no user of bus and invokes
snd_hdac_ext_bus_link_get to set up CORB/RIRB buffers when it is used.
Unsolicited responses is disabled in snd_hdac_bus_stop_cmd_io called by
snd_hdac_ext_bus_link_put , but it is not enabled in snd_hdac_bus_init_cmd_io
called by snd_hdac_ext_bus_link_get. So for put-get sequence, Unsolicited
responses is disabled and headphone can't be detected by hda codecs.
Now unsolicited responses is only enabled in snd_hdac_bus_reset_link
which resets controller. The function is only called for setup of
controller. This patch enables Unsolicited responses after RIRB is
initialized in snd_hdac_bus_init_cmd_io which works together with
snd_hdac_bus_reset_link to set up controller.
Tested legacy hda driver and SOF driver on intel whiskeylake.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The patch is to fix commit 5e13cf6cd6
(ALSA: hda: add polling mode in snd_hdac_bus_get_response)
spin_lock_irq should be called before snd_hdac_bus_update_rirb.
Fixes: 5e13cf6cd6 ("ALSA: hda: add polling mode in snd_hdac_bus_get_response")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Polling mode is useful if a machine somehow missed an expected IRQ.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
E.g. for azx_int_enable(), we should set both mask and value to be
"AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN"(the mask was 0) to enable
controller CIE and GIE.
We have similar issues on setting AZX_GCTL_RESET and AZX_GCTL_UNSOL,
here try to correct all of them.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which
1) sets bus->chip_init to prevent multiple entrances before device
is stopped; 2) enables interrupt.
We shouldn't use it for the purpose of resetting device only because
1) when we really want to initialize device, we won't be able to do
so; 2) we are ready to handle interrupt yet, and kernel crashes when
interrupt comes in.
Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset
device properly.
Fixes: 60767abcea ("ASoC: Intel: Skylake: Reset the controller in probe")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In snd_hdac_bus_init_chip(), we enable interrupt before
snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has
been acquired and irq handler uses the dma buffer, kernel may crash
when interrupt comes in.
Fix the problem by postponing enabling irq after dma buffer
initialization. And warn once on null dma buffer pointer during the
initialization.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On reading wrong capability pointer values driver may crash, so whenever
driver discovers unknown HDA capability, log it as error and stop traversing
the link list further.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when
it hits an invalid register value read:
BUG: unable to handle kernel paging request at ffffad5dc41f3fff
IP: pci_azx_readl+0x5/0x10 [snd_hda_intel]
Call Trace:
snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core]
azx_probe_continue+0x7d5/0x940 [snd_hda_intel]
.....
This happened on a new Intel machine, and we need to check the value
and abort the loop accordingly.
[Note: the fixes tag below indicates only the commit where this patch
can be applied; the original problem was introduced even before that
commit]
Fixes: 6720b38420 ("ALSA: hda - move bus_parse_capabilities to core")
Cc: <stable@vger.kernel.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A quiet release for the core, but lots of new drivers this time around:
- A new, generalized, API for hooking up jacks which makes it easier to
write generic machine drivers for simple cases.
- Continuing fixes for issues with the x86 CPU drivers.
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton
NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with
DA7213
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlkH9Q4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0D24B/4oQ67H01Tcq0ghrIsr/UNQnPi+ywx2
e5nkWNvWTM7gSUDOFjmD3ZM07Gf66IIyiFFSt6w93/lDQaOcGgsmBo9tnujR7ytQ
XXUiE1bvx7liZ09/2Rq7DyDXTpYcFAbxLdWt8uGs72misj0XrVToVFJhl5YcMRBE
qnbV1woxQwIvJ5m+GmbW2NZ8bRCnnsMQbBWCIWOtvSPhtZQlQ+m7waYTVn3/ieGR
cWIHwY4lSZycqaYDWZ+RPFipcAwzKTNt0MiXoCI02EX95275AbIHdWAgrVta04Al
muWP1XTkufO73NFqfvEF+Rrpi69pRCNhAS7TJY++d1moKCYgSpG8bAvD
=W3eF
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.12
A quiet release for the core, but lots of new drivers this time around:
- A new, generalized, API for hooking up jacks which makes it easier to
write generic machine drivers for simple cases.
- Continuing fixes for issues with the x86 CPU drivers.
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton
NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with
DA7213
The macros _snd_hdac_chip_read() and *_write() expand to different
types (b,w,l) per their argument. They were thought to be used only
internally for other snd_hdac_chip_*() macros, but in some situations
we need to call these directly, and they are way too ugly.
Instead of saving a few lines, we just write these macros explicitly
with the types, so that they can be used in a saner way.
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
LLCH is a 16 bit register. Use readw instead of readl API.
Signed-off-by: B, Jayachandran <jayachandran.b@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA capability introduced recently are move to hdac core so that it can
be used by legacy driver as well. Also move the capability pointers up
to hdac_bus object.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the DMAs are not being quiesced properly, it may lead to
stability issues, so the recommendation is to wait till DMAs are
stopped.
After setting the stop bit of RIRB/CORB DMA, we should wait for
stop bit to be set.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq. But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling. Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.
This patch changes the interrupt handler code to loop over the
check-and-process. The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.
For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits. Other than that,
the change is only in the irq handler itself.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the controller helper codes to hda-core library.
The I/O access ops are added to the bus ops. The CORB/RIRB, the basic
attributes like irq# and iomap address, some locks and the list of
streams are added to the bus object, together with the stream object
and its helpers.
Currently the codes are just copied from the legacy driver, so you can
find duplicated codes in both directories. Only constants are removed
from the original hda_controller.h. More integration work will follow
in the later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
