commit 4a37f3dd9a83186cb88d44808ab35b78375082c9 upstream.
The original x86 sev_alloc() only called set_memory_decrypted() on
memory returned by alloc_pages_node(), so the page order calculation
fell out of that logic. However, the common dma-direct code has several
potential allocators, not all of which are guaranteed to round up the
underlying allocation to a power-of-two size, so carrying over that
calculation for the encryption/decryption size was a mistake. Fix it by
rounding to a *number* of pages, rather than an order.
Until recently there was an even worse interaction with DMA_DIRECT_REMAP
where we could have ended up decrypting part of the next adjacent
vmalloc area, only averted by no architecture actually supporting both
configs at once. Don't ask how I found that one out...
Fixes: c10f07aa27 ("dma/direct: Handle force decryption for DMA coherent buffers in common code")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Rientjes <rientjes@google.com>
[ backport the functional change without all the prior refactoring ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e19f8fa6ce1ca9b8b934ba7d2e8f34c95abc6e60 ]
Limit the error msg to avoid flooding the console. If you have a lot of
threads hitting this at once, they could have already gotten passed the
dma_debug_disabled() check before they get to the point of allocation
failure, resulting in quite a lot of this error message spamming the
log. Use pr_err_once() to limit that.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ]
We observed the error "cacheline tracking ENOMEM, dma-debug disabled"
during a light system load (copying some files). The reason for this error
is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation -
so it can't access the emergency memory reserves and it fails as soon as
anybody reaches the watermark.
This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the
emergency memory reserves.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 ]
Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1e02b), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better. 
And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.
So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.
Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3]
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig" <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit d4d975e792.
Upstream had a follow-up fix, revert, and a semi-reverted-revert.
Instead of going through this chain which is more painful to backport,
I'm just going to revert this original commit and pick the final one.
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9e02977bfad006af328add9434c8bffa40e053bb upstream.
When we looked into FIO performance with swiotlb enabled in VM, we found
swiotlb_bounce() is always called one more time than expected for each DMA
read request.
It turns out that the bounce buffer is copied to original DMA buffer twice
after the completion of a DMA request (one is done by in
dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()).
But the content in bounce buffer actually doesn't change between the two
rounds of copy. So, one round of copy is redundant.
Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to
skip the memory copy in it.
This fix increases FIO 64KB sequential read throughput in a guest with
swiotlb=force by 5.6%.
Fixes: 55897af630 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Reported-by: Wang Zhaoyang1 <zhaoyang1.wang@intel.com>
Reported-by: Gao Liang <liang.gao@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 80e4390981618e290616dbd06ea190d4576f219d ]
When valid kernel command line parameters
dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's
environment strings, polluting it.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off dma_debug_entries=100", will be passed to user space.
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off
dma_debug_entries=100
Return 1 from these __setup handlers to indicate that the command line
option has been handled.
Fixes: 59d3daafa1 ("dma-debug: add kernel command line parameters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream.
The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit a45b599ad8 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a674e48c5443d12a8a43c3ac42367aa39505d506 upstream.
Currently three dma atomic pools are initialized as long as the relevant
kernel codes are built in. While in kdump kernel of x86_64, this is not
right when trying to create atomic_pool_dma, because there's no managed
pages in DMA zone. In the case, DMA zone only has low 1M memory
presented and locked down by memblock allocator. So no pages are added
into buddy of DMA zone. Please check commit f1d4d47c5851 ("x86/setup:
Always reserve the first 1M of RAM").
Then in kdump kernel of x86_64, it always prints below failure message:
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-0.rc5.20210611git929d931f2b40.42.fc35.x86_64 #1
Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.12.0 06/04/2018
Call Trace:
dump_stack+0x7f/0xa1
warn_alloc.cold+0x72/0xd6
__alloc_pages_slowpath.constprop.0+0xf29/0xf50
__alloc_pages+0x24d/0x2c0
alloc_page_interleave+0x13/0xb0
atomic_pool_expand+0x118/0x210
__dma_atomic_pool_init+0x45/0x93
dma_atomic_pool_init+0xdb/0x176
do_one_initcall+0x67/0x320
kernel_init_freeable+0x290/0x2dc
kernel_init+0xa/0x111
ret_from_fork+0x22/0x30
Mem-Info:
......
DMA: failed to allocate 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Here, let's check if DMA zone has managed pages, then create
atomic_pool_dma if yes. Otherwise just skip it.
Link: https://lkml.kernel.org/r/20211223094435.248523-3-bhe@redhat.com
Fixes: 6f599d8423 ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 293d92cbbd2418ca2ba43fed07f1b92e884d1c77 ]
The following warning occurred sporadically on s390:
DMA-API: nvme 0006:00:00.0: device driver maps memory from kernel text or rodata [addr=0000000048cc5e2f] [len=131072]
WARNING: CPU: 4 PID: 825 at kernel/dma/debug.c:1083 check_for_illegal_area+0xa8/0x138
It is a false-positive warning, due to broken logic in debug_dma_map_sg().
check_for_illegal_area() checks for overlay of sg elements with kernel text
or rodata. It is called with sg_dma_len(s) instead of s->length as
parameter. After the call to ->map_sg(), sg_dma_len() will contain the
length of possibly combined sg elements in the DMA address space, and not
the individual sg element length, which would be s->length.
The check will then use the physical start address of an sg element, and
add the DMA length for the overlap check, which could result in the false
warning, because the DMA length can be larger than the actual single sg
element length.
In addition, the call to check_for_illegal_area() happens in the iteration
over mapped_ents, which will not include all individual sg elements if
any of them were combined in ->map_sg().
Fix this by using s->length instead of sg_dma_len(s). Also put the call to
check_for_illegal_area() in a separate loop, iterating over all the
individual sg elements ("nents" instead of "mapped_ents").
While at it, as suggested by Robin Murphy, also move check_for_stack()
inside the new loop, as it is similarly concerned with validating the
individual sg elements.
Link: https://lore.kernel.org/lkml/20210705185252.4074653-1-gerald.schaefer@linux.ibm.com
Fixes: 884d05970b ("dma-debug: use sg_dma_len accessor")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 173735c346c412d9f084825ecb04f24ada0e2986 ]
Due to link order, dma_debug_init is called before debugfs has a chance
to initialize (via debugfs_init which also happens in the core initcall
stage), so the directories for dma-debug are never created.
Decouple dma_debug_fs_init from dma_debug_init and defer its init until
core_initcall_sync (after debugfs has been initialized) while letting
dma-debug initialization occur as soon as possible to catch any early
mappings, as suggested in [1].
[1] https://lore.kernel.org/linux-iommu/YIgGa6yF%2Fadg8OSN@kroah.com/
Fixes: 15b28bbcd5 ("dma-debug: move initialization to common code")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40ac971eab89330d6153e7721e88acd2d98833f9 ]
xen-swiotlb can use vmalloc backed addresses for dma coherent allocations
and uses the common helpers. Properly handle them to unbreak Xen on
ARM platforms.
Fixes: 1b65c4e5a9 ("swiotlb-xen: use xen_alloc/free_coherent_pages")
Signed-off-by: Roman Skakun <roman_skakun@epam.com>
Reviewed-by: Andrii Anisov <andrii_anisov@epam.com>
[hch: split the patch, renamed the helpers]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5f89468e2f060031cd89fd4287298e0eaf246bf6 upstream.
in case of driver wants to sync part of ranges with offset,
swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with
offset and ends up with data mismatch.
It was removed from
"swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single",
but said logic has to be added back in.
From Linus's email:
"That commit which the removed the offset calculation entirely, because the old
(unsigned long)tlb_addr & (IO_TLB_SIZE - 1)
was wrong, but instead of removing it, I think it should have just
fixed it to be
(tlb_addr - mem->start) & (IO_TLB_SIZE - 1);
instead. That way the slot offset always matches the slot index calculation."
(Unfortunatly that broke NVMe).
The use-case that drivers are hitting is as follow:
1. Get dma_addr_t from dma_map_single()
dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE);
|<---------------vsize------------->|
+-----------------------------------+
| | original buffer
+-----------------------------------+
vaddr
swiotlb_align_offset
|<----->|<---------------vsize------------->|
+-------+-----------------------------------+
| | | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
2. Do something
3. Sync dma_addr_t through dma_sync_single_for_device(..)
dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE);
Error case.
Copy data to original buffer but it is from base addr (instead of
base addr + offset) in original buffer:
swiotlb_align_offset
|<----->|<- offset ->|<- size ->|
+-------+-----------------------------------+
| | |##########| | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
|<- size ->|
+-----------------------------------+
|##########| | original buffer
+-----------------------------------+
vaddr
The fix is to copy the data to the original buffer and take into
account the offset, like so:
swiotlb_align_offset
|<----->|<- offset ->|<- size ->|
+-------+-----------------------------------+
| | |##########| | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
|<- offset ->|<- size ->|
+-----------------------------------+
| |##########| | original buffer
+-----------------------------------+
vaddr
[One fix which was Linus's that made more sense to as it created a
symmetry would break NVMe. The reason for that is the:
unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1);
would come up with the proper offset, but it would lose the
alignment (which this patch contains).]
Fixes: 16fc3cef33a0 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single")
Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
CC: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95b079d8215b83b37fa59341fda92fcb9392f14a ]
Fix the type of index from unsigned int to int since find_slots() might
return -1.
Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit: 1f221a0d0dbf0e48ef3a9c62871281d6a7819f05
swiotlb: respect min_align_mask
Respect the min_align_mask in struct device_dma_parameters in swiotlb.
There are two parts to it:
1) for the lower bits of the alignment inside the io tlb slot, just
extent the size of the allocation and leave the start of the slot
empty
2) for the high bits ensure we find a slot that matches the high bits
of the alignment to avoid wasting too much memory
Based on an earlier patch from Jianxiong Gao <jxgao@google.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit: 16fc3cef33a04632ab6b31758abdd77563a20759
swiotlb_tbl_map_single currently nevers sets a tlb_addr that is not
aligned to the tlb bucket size. But we're going to add such a case
soon, for which this adjustment would be bogus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit: 26a7e094783d482f3e125f09945a5bb1d867b2e6
Split out a bunch of a self-contained helpers to make the function easier
to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit: ca10d0f8e530600ec63c603dbace2c30927d70b7
swiotlb: clean up swiotlb_tbl_unmap_single
Remove a layer of pointless indentation, replace a hard to follow
ternary expression with a plain if/else.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit: c32a77fd18780a5192dfb6eec69f239faebf28fd
Factor out a helper to find the number of slots for a given size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit: c7fbeca757fe74135d8b6a4c8ddaef76f5775d68
Replace the very genericly named OFFSET macro with a little inline
helper that hardcodes the alignment to the only value ever passed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit: b5d7ccb7aac3895c2138fe0980a109116ce15eff
Add a new IO_TLB_SIZE define instead open coding it using
IO_TLB_SHIFT all over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tbl_dma_addr argument is used to check the DMA boundary for the
allocations, and thus needs to be a dma_addr_t. swiotlb-xen instead
passed a physical address, which could lead to incorrect results for
strange offsets. Fix this by removing the parameter entirely and hard
code the DMA address for io_tlb_start instead.
Fixes: 91ffe4ad53 ("swiotlb-xen: introduce phys_to_dma/dma_to_phys translations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
kernel/dma/swiotlb.c:swiotlb_init gets called first and tries to
allocate a buffer for the swiotlb. It does so by calling
memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
If the allocation must fail, no_iotlb_memory is set.
Later during initialization swiotlb-xen comes in
(drivers/xen/swiotlb-xen.c:xen_swiotlb_init) and given that io_tlb_start
is != 0, it thinks the memory is ready to use when actually it is not.
When the swiotlb is actually needed, swiotlb_tbl_map_single gets called
and since no_iotlb_memory is set the kernel panics.
Instead, if swiotlb-xen.c:xen_swiotlb_init knew the swiotlb hadn't been
initialized, it would do the initialization itself, which might still
succeed.
Fix the panic by setting io_tlb_start to 0 on swiotlb initialization
failure, and also by setting no_iotlb_memory to false on swiotlb
initialization success.
Fixes: ac2cbab21f ("x86: Don't panic if can not alloc buffer for swiotlb")
Reported-by: Elliott Mitchell <ehem+xen@m5p.com>
Tested-by: Elliott Mitchell <ehem+xen@m5p.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Due to a mismerge a bunch of prototypes that should have moved to
dma-map-ops.h are still in dma-mapping.h, fix that up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fix multiple occurrences of duplicated words in kernel/.
Fix one typo/spello on the same line as a duplicate word. Change one
instance of "the the" to "that the". Otherwise just drop one of the
repeated words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/98202fa6-8919-ef63-9efe-c0fad5ca7af1@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Minor enhancement of using %p to print phys_addr_r and also compiler
warnings"
* 'stable/for-linus-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Mark max_segment with static keyword
swiotlb: Declare swiotlb_late_init_with_default_size() in header
swiotlb: Use %pa to print phys_addr_t variables
The memory size calculation in cma_early_percent_memory() traverses
memblock.memory rather than simply call memblock_phys_mem_size(). The
comment in that function suggests that at some point there should have
been call to memblock_analyze() before memblock_phys_mem_size() could be
used. As of now, there is no memblock_analyze() at all and
memblock_phys_mem_size() can be used as soon as cold-plug memory is
registered with memblock.
Replace loop over memblock.memory with a call to memblock_phys_mem_size().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use and entirely separate code path for the DMA_ATTR_NO_KERNEL_MAPPING
path. This avoids any confusion about the ret type, and avoids lots of
attr checks and helpers that can be significantly simplified now.
It also ensures that common handling is applied to architetures still
using the arch alloc/free hooks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
This ensures dma_direct_alloc_pages will use the right gfp mask, as
well as keeping the code for that common between the two allocators.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of the dma_direct symbols should only be used by direct.c and
mapping.c, so move them to kernel/dma. In fact more of dma-direct.h
should eventually move, but that will require more coordination with
other subsystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of dma-debug.h is not required by anything outside of kernel/dma.
Move the four declarations needed by dma-mappin.h or dma-ops providers
into dma-mapping.h and dma-map-ops.h, and move the remainder of the
file to kernel/dma/debug.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma_contiguous_set_default contains a trivial assignment, and has a
single caller that is compiled if CONFIG_CMA_DMA is enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
dev_set_cma_area contains a trivial assignment. It has just three
callers that all have a non-NULL device and depend on CONFIG_DMA_CMA,
so remove the wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
On an embedded system with a tiny (1 MiB) CMA area for video memory, and
a simple enough video pipeline, we can decrease the CMA_ALIGNMENT by a
factor of 2 to avoid wasting memory, as all the allocations for video
buffers will be of the exact same size (dictated by the size of the
screen).
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device. The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.
Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
All users are gone now, remove the API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
The new field 'dma_range_map' in struct device is used to facilitate the
use of single or multiple offsets between mapping regions of cpu addrs and
dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only
capable of holding a single uniform offset and had no region bounds
checking.
The function of_dma_get_range() has been modified so that it takes a single
argument -- the device node -- and returns a map, NULL, or an error code.
The map is an array that holds the information regarding the DMA regions.
Each range entry contains the address offset, the cpu_start address, the
dma_start address, and the size of the region.
of_dma_configure() is the typical manner to set range offsets but there are
a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
driver code. These cases now invoke the function
dma_direct_set_offset(dev, cpu_addr, dma_addr, size).
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[hch: various interface cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
When booting the kernel v5.9-rc4 on a VM, the kernel would panic when
printing a warning message in swiotlb_map(). The dev->dma_mask must not
be a NULL pointer when calling the dma mapping layer. A NULL pointer
check can potentially avoid the panic.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma_declare_coherent_memory should not be in a DMA API guide aimed
at driver writers (that is consumers of the API). Move it to a comment
near the function instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Add a new file that contains helpers for misc DMA ops, which is only
built when CONFIG_DMA_OPS is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try
to improve the situation by renaming __phys_to_dma to
phys_to_dma_unencryped, and not forcing architectures that want to
override phys_to_dma to actually provide __phys_to_dma.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
There is no harm in just always clearing the SME encryption bit, while
significantly simplifying the interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
