Add parsers for motion plus data so we can hotplug motion plus extensions
and make use of them. This is mostly the same as the old static motion
plus parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new extension module for the classic controller so we get hotplug
support for this device. It is mostly the same as the old static classic
controller parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This moves the nunchuk parser over to an extension module. This allows to
make use of hotplugged Nunchuks instead of the old static parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds Nintendo Wii Balance Board support to the new HOTPLUG capable
wiimote core. It is mostly copied from the old extension.
This also adds Balance Board device detection. Whenever we find a device
that supports the balance-board extension, we assume that it is a real
balance board and disable unsupported hardward like accelerometer, IR,
rumble and more.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Wii Remote has several extension ports. The first port (EXT) provides
hotplug events whenever an extension is plugged. The second port (MP)
does not provide hotplug events by default. Instead, we have to map MP
into EXT to get events for it.
This patch introduces hotplug support for extensions. It is fairly
complicated to get this right because the Wii Remote sends a lot of
noise-hotplug events while activating extension ports. We need to filter
the events and only handle the events that are real hotplug events.
Mapping MP into EXT is easy. But if we want both, MP _and_ EXT at the same
time, we need to map MP into EXT and enable a passthrough-mode. This will
then send real EXT events through the mapped MP interleaved with real MP
events. But once MP is mapped, we no longer have access to the real EXT
registers so we need to perform setup _before_ mapping MP. Furthermore, we
no longer can read EXT IDs so we cannot verify if EXT is still the same
extension that we expect it to be.
We deal with this by unmapping MP whenever we got into a situation where
EXT might have changed. We then re-read EXT and MP and remap everything.
The real Wii Console takes a fairly easy approach: It simply reconnects to
the device on hotplug events that it didn't expect. So if a program wants
MP events, but MP is disconnected, it fails and reconnects so it can wait
for MP hotplug events again.
This simplifies hotplugging a lot because we just react on PLUG events and
ignore UNPLUG events.
The more sophisticated Wii applications avoid reconnection (well, they
still reconnect during many weird events, but at least not during UNPLUG)
but they start polling the device. This allows them to disable the device,
poll for the extension ports to settle and then initialize them again.
Unfortunately, this approach fails whenever an extension is replugged
while it is initialized. We would loose UNPLUG events and polling the
device later will give unreliable results because the extension port might
be in some weird state, even though it's actually unplugged.
Our approach is a real HOTPLUG approch. We keep track of the EXT and
mapped MP hotplug events whenever they occur. We then re-evaluate the
device state and initialize any possible new extension or deinitialize any
gone extension. Only during initialization, we set an extension port
ACTIVE. However, during an unplug event we mark them as INACTIVE. This
guarantess that a fast UNPLUG -> PLUG event sequence doesn't keep them
marked as PLUGGED+ACTIVE but only PLUGGED.
To deal with annoying noise-hotplug events during extension mapping, we
simply rescan the device before performing any mapping. This allows us to
ignore all the noise events as long as the device is in the correct state.
Long story short: EXT and MP registers are sparsely known and we need to
jump through hoops to get reliable HOTPLUG working. But while Nintendo
needs *FOUR* Bluetooth reconnections for the shortest imaginable
boot->menu->game->menu->shutdown sequence, we now need *ZERO*.
As always, 3rd party devices tend to break whenever we behave differently
than the original Wii. So there are also devices which _expect_ a
disconnect after UNPLUG. Obviously, these devices won't benefit from this
patch. But all official devices were tested extensively and work great
during any hotplug sequence. Yay!
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
IR is the last piece that still is handled natively. This patch converts
it into a sub-device module like all other sub-devices. It mainly moves
code and doesn't change semantics.
We also implicitly sync IR data on ir_to_input3 now so the explicit
input_sync() calls are no longer needed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Accelerometer data is very similar to KEYS handling. Therefore, convert
all ACCEL related handling into a sub-device module similar to KEYS.
This doesn't change any semantics but only moves code over to
wiimote-modules.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Each of the 4 LEDs may be supported individually by devices. Therefore,
we need one module for each device. To avoid code-duplication, we simply
pass the LED ID as "arg" argument to the module loading code.
This just moves the code over to wiimote-module. The semantics stay the
same as before.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This introduces a new sub-device module for the BATTERY handlers. It
moves the whole power_supply battery handling over to wiimote-modules.
This doesn't change any semantics or ABI but only converts the battery
handling into a sub-device module.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This introduces the first sub-device modules by converting the KEYS and
RUMBLE sub-devices into wiimote modules. Both must be converted at once
because they depend on the built-in shared input device.
This mostly moves code from wiimote-core to wiimote-modules and doesn't
change any semantics or ABI.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To avoid loading all sub-device drivers for every Wii Remote, even though
the required hardware might not be available, we introduce a module layer.
The module layer specifies which sub-devices are available on each
device-type. After device detection, we only load the modules for the
detected device. If module loading fails, we unload everything and mark
the device as WIIMOTE_DEV_UNKNOWN. As long as a device is marked as
"unknown", no sub-devices will be used and the device is considered
unsupported.
All the different sub-devices, including KEYS, RUMBLE, BATTERY, LEDS,
ACCELEROMETER, IR and more will be ported in follow-up patches to the new
module layer.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Our output queue is asynchronous but synchronous reports may wait for a
response to their request. Therefore, wake them up unconditionally if an
output report couldn't be sent. But keep the report ID intact so we don't
incorrectly assume our request succeeded.
Note that the underlying connection is required to be reliable and does
retransmission itself. So it is safe to assume that if the transmission
fails, the device is in inconsistent state. Hence, we abort every request
if any output report fails. No need to verify which report failed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery reports are sent along every status report of the Wii Remote.
So chances are pretty high that we have an up-to-date battery
cache at any time. Therefore, initialize the battery-cache to 100% and
then return battery values from the cache if the query fails.
This works around a power_supply limitation in that it requires us to be
able to query the device during power_supply registration and
removal. Otherwise, "add" or "remove" udev events are not sent. If
we answer these requests from our cache instead, we avoid dropping these
events and no longer cause warnings printed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Nintendo produced many different devices that are internally based on the
Wii Remote protocol but provide different peripherals. To support these
devices, we need to schedule a device detection during initialization.
Device detection includes requesting a status report, reading extension
information and then evaluating which device we may be dealing with.
We currently detect gen1 and gen2 Wii Remote devices. All other devices
are marked as generic devices. More detections will be added later.
In followup patches we will be using these device IDs to control which
peripherals to initialize. For instance if a device is known to have no IR
camera, there is no need to provide the IR input device nor trying to
access IR registers. In fact, there are 3rd party devices that break if we
try things like this (hurray!).
The init_worker will be scheduled whenever we get hotplug events. This
isn't implemented, yet and will be added later. However, we need to make
sure that this worker can be called multiple times.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We need constant I/O to keep the state up-to-date and not miss any
packets. Hence, call hid_hw_open() during setup and hid_hw_close() during
destruction.
These are no-ops for Bluetooth HIDP, but lets be safe.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The output queue is independent of the other wiimote modules and can run
on its own. Therefore, move its members into a separate struct so we don't
run into name collisions with other modules.
This is only a syntactic change that renames all queue members to queue.*.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid-wiimote driver supports more than the Wii Remote. Nintendo
produced many devices based on the Wii Remote, which have extension
devices built-in. It is not clear to many users, that these devices have
anything in common with the Wii Remote, so fix the driver description.
This also updates the copyright information for the coming hotplugging
rework.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- fix usage of sleeping lock in atomic context from Jiri Kosina
- build fix for hid-steelseries under certain .config setups by Simon Wood
- simple mismerge fix from Fernando Luis Vázquez Cao
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: debug: fix RCU preemption issue
HID: hid-steelseries fix led class build issue
HID: reintroduce fix-up for certain Sony RF receivers
This contains small fixes since the previous pull request:
- A few regression fixes and small updates of HD-audio
- Yet another fix for Haswell HDMI audio
- A copule of trivial fixes in ASoC McASP, DPAM and WM8994
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=DMsb
-----END PGP SIGNATURE-----
Merge tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains small fixes since the previous pull request:
- A few regression fixes and small updates of HD-audio
- Yet another fix for Haswell HDMI audio
- A copule of trivial fixes in ASoC McASP, DPAM and WM8994"
* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
Revert "ALSA: hda - Don't set up active streams twice"
ALSA: Add comment for control TLV API
ALSA: hda - Apply pin-enablement workaround to all Haswell HDMI codecs
ALSA: HDA: Fix Oops caused by dereference NULL pointer
ALSA: mips/sgio2audio: Remove redundant platform_set_drvdata()
ALSA: mips/hal2: Remove redundant platform_set_drvdata()
ALSA: hda - Fix 3.9 regression of EAPD init on Conexant codecs
sound: Fix make allmodconfig on MIPS
ALSA: hda - Fix system panic when DMA > 40 bits for Nvidia audio controllers
ALSA: atmel: Remove redundant platform_set_drvdata()
ASoC: McASP: Fix receive clock polarity in DAIFMT_NB_NF mode.
ASoC: wm8994: missing break in wm8994_aif3_hw_params()
ASoC: McASP: Add pins output direction for rx clocks when configured in CBS_CFS format
ASoC: dapm: use clk_prepare_enable and clk_disable_unprepare
Pull MIPS updates from Ralf Baechle:
- More work on DT support for various platforms
- Various fixes that were to late to make it straight into 3.9
- Improved platform support, in particular the Netlogic XLR and
BCM63xx, and the SEAD3 and Malta eval boards.
- Support for several Ralink SOC families.
- Complete support for the microMIPS ASE which basically reencodes the
existing MIPS32/MIPS64 ISA to use non-constant size instructions.
- Some fallout from LTO work which remove old cruft and will generally
make the MIPS kernel easier to maintain and resistant to compiler
optimization, even in absence of LTO.
- KVM support. While MIPS has announced hardware virtualization
extensions this KVM extension uses trap and emulate mode for
virtualization of MIPS32. More KVM work to add support for VZ
hardware virtualizaiton extensions and MIPS64 will probably already
be merged for 3.11.
Most of this has been sitting in -next for a long time. All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.
Semantic conflict with kvm updates done as per Ralf
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
MIPS: Add new GIC clockevent driver.
MIPS: Formatting clean-ups for clocksources.
MIPS: Refactor GIC clocksource code.
MIPS: Move 'gic_frequency' to common location.
MIPS: Move 'gic_present' to common location.
MIPS: MIPS16e: Add unaligned access support.
MIPS: MIPS16e: Support handling of delay slots.
MIPS: MIPS16e: Add instruction formats.
MIPS: microMIPS: Optimise 'strnlen' core library function.
MIPS: microMIPS: Optimise 'strlen' core library function.
MIPS: microMIPS: Optimise 'strncpy' core library function.
MIPS: microMIPS: Optimise 'memset' core library function.
MIPS: microMIPS: Add configuration option for microMIPS kernel.
MIPS: microMIPS: Disable LL/SC and fix linker bug.
MIPS: microMIPS: Add vdso support.
MIPS: microMIPS: Add unaligned access support.
MIPS: microMIPS: Support handling of delay slots.
MIPS: microMIPS: Add support for exception handling.
MIPS: microMIPS: Floating point support.
MIPS: microMIPS: Fix macro naming in micro-assembler.
...
I'm satisified with testing, specially with fuse which has historically given
grief to VIPT arches (ARM/PARISC...)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=r4lw
-----END PGP SIGNATURE-----
Merge tag 'arc-v3.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull second set of arc arch updates from Vineet Gupta:
"Aliasing VIPT dcache support for ARC
I'm satisified with testing, specially with fuse which has
historically given grief to VIPT arches (ARM/PARISC...)"
* tag 'arc-v3.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [TB10x] Remove GENERIC_GPIO
ARC: [mm] Aliasing VIPT dcache support 4/4
ARC: [mm] Aliasing VIPT dcache support 3/4
ARC: [mm] Aliasing VIPT dcache support 2/4
ARC: [mm] Aliasing VIPT dcache support 1/4
ARC: [mm] refactor the core (i|d)cache line ops loops
ARC: [mm] serious bug in vaddr based icache flush
Pull m68knommu updates from Greg Ungerer:
"The bulk of the changes are generalizing the ColdFire v3 core support
and adding in 537x CPU support. Also a couple of other bug fixes, one
to fix a reintroduction of a past bug in the romfs filesystem nommu
support."
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: enable Timer on coldfire 532x
m68knommu: fix ColdFire 5373/5329 QSPI base address
m68knommu: add support for configuring a Freescale M5373EVB board
m68knommu: add support for the ColdFire 537x family of CPUs
m68knommu: make ColdFire M532x platform support more v3 generic
m68knommu: create and use a common M53xx ColdFire class of CPUs
m68k: remove unused asm/dbg.h
m68k: Set ColdFire ACR1 cache mode depending on kernel configuration
romfs: fix nommu map length to keep inside filesystem
m68k: clean up unused "config ROMVECSIZE"
Pull microblaze updates from Michal Simek.
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Enable IRQ in arch_cpu_idle
microblaze: Fix uaccess_ok macro
microblaze: Add support for new cpu versions and target architecture
microblaze: Do not select OPT_LIB_ASM by default
microblaze: Fix initrd support
microblaze: Do not use r6 in head.S
microblaze: pci: Remove duplicated header
microblaze: Set the default irq_domain
microblaze: pci: Remove duplicated include from pci-common.c
This reverts commit affdb62b81.
The commit introduced a regression with AD codecs where the stream is
always clean up. Since the patch is just a minor optimization and
reverting the commit fixes the issue, let's just revert it.
Reported-and-tested-by: Michael Burian <michael.burian@sbg.at>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Zw0E
-----END PGP SIGNATURE-----
Merge tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull trivial pstore update from Tony Luck:
"Couple of pstore cleanups"
It turns out that the kmemdup() conversion ends up being undone by the
fact that the memory block also needed the ecc information (see commit
bd08ec33b5c2: "pstore/ram: Restore ecc information block"), so all that
remains after merging is the error return code change.
* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
pstore/ram: fix error return code in ramoops_probe()
fs: pstore: Replaced calls to kmalloc and memcpy with kmemdup
Pull NVMe driver update from Matthew Wilcox:
"Lots of exciting new features in the NVM Express driver this time,
including support for emulating SCSI commands, discard support and the
ability to submit per-sector metadata with I/Os.
It's still mostly bugfixes though!"
* git://git.infradead.org/users/willy/linux-nvme: (27 commits)
NVMe: Use user defined admin ioctl timeout
NVMe: Simplify Firmware Activate code slightly
NVMe: Only clear the enable bit when disabling controller
NVMe: Wait for device to acknowledge shutdown
NVMe: Schedule timeout for sync commands
NVMe: Meta-data support in NVME_IOCTL_SUBMIT_IO
NVMe: Device specific stripe size handling
NVMe: Split non-mergeable bio requests
NVMe: Remove dead code in nvme_dev_add
NVMe: Check for NULL memory in nvme_dev_add
NVMe: Fix error clean-up on nvme_alloc_queue
NVMe: Free admin queue on request_irq error
NVMe: Add scsi unmap to SG_IO
NVMe: queue usage fixes in nvme-scsi
NVMe: Set TASK_INTERRUPTIBLE before processing queues
NVMe: Add a character device for each nvme device
NVMe: Fix endian-related problems in user I/O submission path
NVMe: Fix I/O cancellation status on big-endian machines
NVMe: Fix sparse warnings in scsi emulation
NVMe: Don't fail initialisation unnecessarily
...
- _INI regression fix from Tomasz Nowicki.
- Fix for a possible memory leak in _OSI support routine from
Jung-uk Kim.
- Fix for a possible buffer overflow during field unit read operation
from Bob Moore.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=asD2
-----END PGP SIGNATURE-----
Merge tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPICA fixes from Rafael Wysocki:
- _INI regression fix from Tomasz Nowicki.
- Fix for a possible memory leak in _OSI support routine from Jung-uk
Kim.
- Fix for a possible buffer overflow during field unit read operation
from Bob Moore.
* tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: ACPICA: Fix for _INI regression
ACPICA: _OSI support: Fix possible memory leak
ACPICA: Fix possible buffer overflow during a field unit read operation
A collection of fixes for fall out from 3.10 merge window, some build
fixes and warning cleanups and a small handful of patches that were
small and contained and made sense to still include in 3.10 (some of
these have also been in -next since the merge window opened).
Largest continous series is for OMAP, but there's a handful for other
platforms.
For i.MX, one of the patches are framebuffer fixups due to fallout during
the merge window, and the other removes some stale and broken code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=CpHk
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes and straggler patches from Olof Johansson:
"A collection of fixes for fall out from 3.10 merge window, some build
fixes and warning cleanups and a small handful of patches that were
small and contained and made sense to still include in 3.10 (some of
these have also been in -next since the merge window opened).
Largest continous series is for OMAP, but there's a handful for other
platforms.
For i.MX, one of the patches are framebuffer fixups due to fallout
during the merge window, and the other removes some stale and broken
code."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
ARM: exynos: dts: Fixed vbus-gpios
ARM: EXYNOS5: Fix kernel dump in AFTR idle mode
ARM: ux500: Rid ignored return value of regulator_enable() compiler warning
ARM: ux500: read the correct soc_id number
ARM: exynos: dts: cros5250: add cyapa trackpad
video: mxsfb: Adapt to new videomode API
ARM: imx: Select GENERIC_ALLOCATOR
ARM: imx: compile fix for hotplug.c
ARM: dts: don't assume boards are using twl4030 for omap3
ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
ARM: dts: Configure and fix the McSPI pins for 4430sdp
ARM: dts: AM33XX: Add GPMC node
ARM: dts: OMAP4460: Fix CPU OPP voltages
ARM: dts: OMAP36xx: Fix CPU OPP voltages
ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
omap: mux: add AM/DM37x gpios
ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
ARM: OMAP2+: omap_device: use late_initcall_sync
ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=tGki
-----END PGP SIGNATURE-----
Merge tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux
Pull xtensa updates from Chris Zankel:
"Support for the latest MMU architecture that allows for a larger
accessible memory region, and various bug-fixes"
* tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux:
xtensa: Switch to asm-generic/linkage.h
xtensa: fix redboot load address
xtensa: ISS: fix timer_lock usage in rs_open
xtensa: disable IRQs while IRQ handler is running
xtensa: enable lockdep support
xtensa: fix arch_irqs_disabled_flags implementation
xtensa: add irq flags trace support
xtensa: provide custom CALLER_ADDR* implementations
xtensa: add stacktrace support
xtensa: clean up stpill_registers
xtensa: don't use a7 in simcalls
xtensa: don't attempt to use unconfigured timers
xtensa: provide default platform_pcibios_init implementation
xtensa: remove KCORE_ELF again
xtensa: document MMUv3 setup sequence
xtensa: add MMU v3 support
xtensa: fix ibreakenable register update
xtensa: fix oprofile building as module
* Support for two new platforms based on ARC700
- Abilis TB10x SoC [Chritisian/Pierrick]
- Simulator only System-C Model [Mischa]
* ARC specific MM improvements
- Avoid full TLB flush (ASID increment) on munmap (even single page)
- VIPT Cache Flushing improvements
+ Delayed dcache flush for non-aliasing dcache (big performance boost)
+ icache flush aliasing agnostic (no need to kill all possible aliases)
* Others
- Avoid needless rebuild of DTB files for every kernel build
- Remove builtin cmdline as that is already provided by DeviceTree/bootargs
- Fixing unaligned access emulation corner case
- checkpatch fixes [Sachin]
- Various fixlets [Noam]
- Minor build failures/cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=WeDp
-----END PGP SIGNATURE-----
Merge tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC port updates from Vineet Gupta:
"Support for two new platforms based on ARC700:
- Abilis TB10x SoC [Chritisian/Pierrick]
- Simulator only System-C Model [Mischa]
ARC specific MM improvements:
- Avoid full TLB flush (ASID increment) on munmap (even single page)
- VIPT Cache Flushing improvements
+ Delayed dcache flush for non-aliasing dcache (big performance boost)
+ icache flush aliasing agnostic (no need to kill all possible aliases)
Others:
- Avoid needless rebuild of DTB files for every kernel build
- Remove builtin cmdline as that is already provided by DeviceTree/bootargs
- Fixing unaligned access emulation corner case
- checkpatch fixes [Sachin]
- Various fixlets [Noam]
- Minor build failures/cleanups"
* tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (35 commits)
ARC: [mm] Lazy D-cache flush (non aliasing VIPT)
ARC: [mm] micro-optimize page size icache invalidate
ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers
ARC: [mm] consolidate icache/dcache sync code
ARC: [mm] optimise icache flush for kernel mappings
ARC: [mm] optimise icache flush for user mappings
ARC: [mm] optimize needless full mm TLB flush on munmap
ARC: Add support for nSIM OSCI System C model
ARC: [TB10x] Adapt device tree to new compatible string
ARC: [TB10x] Add support for TB10x platform
ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
ARC: Prepare interrupt code for external controllers
ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy
ARC: [cmdline] Don't overwrite u-boot provided bootargs
ARC: [cmdline] Remove CONFIG_CMDLINE
ARC: [plat-arcfpga] defconfig update
ARC: unaligned access emulation broken if callee-reg dest of LD/ST
ARC: unaligned access emulation error handling consolidation
ARC: Debug/crash-printing Improvements
ARC: fix typo with clock speed
...
Pull tile update from Chris Metcalf:
"The interesting bug fix is support for the upcoming "4.2" release of
the Tilera hypervisor, which by default launches Linux at privilege
level 2 instead of 1. The fix lets new and old hypervisors and
Linuxes interoperate more smoothly, so I've tagged it for
stable@kernel.org so that older Linuxes will be able to boot under the
newer hypervisor."
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
usb: tilegx: fix memleak when create hcd fail
arch/tile: remove inline marking of EXPORT_SYMBOL functions
rtc: rtc-tile: add missing platform_device_unregister() when module exit
tile: support new Tilera hypervisor
The semctl GETNCNT returns the number of semops waiting for the
specified semaphore to become nonzero. After commit 9f1bc2c902
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.
In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The semctl GETZCNT returns the number of semops waiting for the
specified semaphore to become zero. After commit 9f1bc2c902
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.
In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.
This bug broke dbench; it works again with this patch applied.
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Kent Overstreet <koverstreet@google.com>
Tested-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more vfs fixes from Al Viro:
"Regression fix from Geert + yet another open-coded kernel_read()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ecryptfs: don't open-code kernel_read()
xtensa simdisk: Fix proc_create_data() conversion fallout
The 'samsung,vbus-gpio' was submitted before pinmux landed for
exynos5250 and uses the old-style gpio specifier. Fix the two
exynos5250 boards that use it.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The kernel crashes while resuming from AFTR idle mode. It happens
because L2 cache was not going into retention state.
This patch configures the USE_RETENTION bit of ARM_L2_OPTION register
so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of
ARM_COMMON_OPTION register for L2RSTDISABLE signal.
Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Tested-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix triggering for GPIO interrupts that's needed for 4430sdp
Ethernet. Otherwise booting with nfsroot won't work.
- Fix CPU operating point values
- Fix wrong assumption that twl PMIC is always connected to omap3
- Add gpmc for am33xx so beaglebone users can use the bus
- Cosmetic fix for mcspi pin muxing to avoid confusion
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=/Y67
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Omap device tree fixes for issue discovered during the merge window:
- Fix triggering for GPIO interrupts that's needed for 4430sdp
Ethernet. Otherwise booting with nfsroot won't work.
- Fix CPU operating point values
- Fix wrong assumption that twl PMIC is always connected to omap3
- Add gpmc for am33xx so beaglebone users can use the bus
- Cosmetic fix for mcspi pin muxing to avoid confusion
* tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: don't assume boards are using twl4030 for omap3
ARM: dts: Configure and fix the McSPI pins for 4430sdp
ARM: dts: AM33XX: Add GPMC node
ARM: dts: OMAP4460: Fix CPU OPP voltages
ARM: dts: OMAP36xx: Fix CPU OPP voltages
ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards
- Few GPMC fixes and binding doc updates noted after sending
pull requests for the GPMC branch.
- Board fixes for beagle usb host and rx51 spi probe order
- SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
handling fixes
Then few minor things that are not strictly fixes but are good
to get out of the way:
- Add missing legacy mux registers for am/dm73x gpio
- Add detection for am33xx pg2.1 silicon
- Enable twl4030 audio modules in defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=lnij
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Omap fixes for things that were discovered during the merge window:
- Few GPMC fixes and binding doc updates noted after sending
pull requests for the GPMC branch.
- Board fixes for beagle usb host and rx51 spi probe order
- SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
handling fixes
Then few minor things that are not strictly fixes but are good
to get out of the way:
- Add missing legacy mux registers for am/dm73x gpio
- Add detection for am33xx pg2.1 silicon
- Enable twl4030 audio modules in defconfig
* tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
omap: mux: add AM/DM37x gpios
ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
ARM: OMAP2+: omap_device: use late_initcall_sync
ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
ARM: OMAP2+: only WARN if a GPMC child probe function fail
ARM: OMAP2+: only search for GPMC DT child nodes on probe
Documentation: dt: update properties in TI GPMC NAND example
Documentation: dt: update TI GPMC ethernet binding properties
Signed-off-by: Olof Johansson <olof@lixom.net>
arch/arm/mach-ux500/board-mop500.c: In function ‘mop500_prox_activate’:
arch/arm/mach-ux500/board-mop500.c:406:18: warning: ignoring return value of
‘regulator_enable’, declared with attribute warn_unused_result
[-Wunused-result]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix db8500_read_soc_id() to read all five soc_id number locations
instead of repeating the second one two times.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull btrfs update from Chris Mason:
"These are mostly fixes. The biggest exceptions are Josef's skinny
extents and Jan Schmidt's code to rebuild our quota indexes if they
get out of sync (or you enable quotas on an existing filesystem).
The skinny extents are off by default because they are a new variation
on the extent allocation tree format. btrfstune -x enables them, and
the new format makes the extent allocation tree about 30% smaller.
I rebased this a few days ago to rework Dave Sterba's crc checks on
the super block, but almost all of these go back to rc6, since I
though 3.9 was due any minute.
The biggest missing fix is the tracepoint bug that was hit late in
3.9. I ran into problems with that in overnight testing and I'm still
tracking it down. I'll definitely have that fixed for rc2."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (101 commits)
Btrfs: allow superblock mismatch from older mkfs
btrfs: enhance superblock checks
btrfs: fix misleading variable name for flags
btrfs: use unsigned long type for extent state bits
Btrfs: improve the loop of scrub_stripe
btrfs: read entire device info under lock
btrfs: remove unused gfp mask parameter from release_extent_buffer callchain
btrfs: handle errors returned from get_tree_block_key
btrfs: make static code static & remove dead code
Btrfs: deal with errors in write_dev_supers
Btrfs: remove almost all of the BUG()'s from tree-log.c
Btrfs: deal with free space cache errors while replaying log
Btrfs: automatic rescan after "quota enable" command
Btrfs: rescan for qgroups
Btrfs: split btrfs_qgroup_account_ref into four functions
Btrfs: allocate new chunks if the space is not enough for global rsv
Btrfs: separate sequence numbers for delayed ref tracking and tree mod log
btrfs: move leak debug code to functions
Btrfs: return free space in cow error path
Btrfs: set UUID in root_item for created trees
...
Trivial patch, adding the i2c Cypress trackpad used on Snow.
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
* add CONFIG_XFS_WARN, a step between zero debugging and CONFIG_XFS_DEBUG.
* fix attrmulti and attrlist to fall back to vmalloc when kmalloc fails.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=IPgF
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.10-rc1-2' of git://oss.sgi.com/xfs/xfs
Pull xfs update (#2) from Ben Myers:
- add CONFIG_XFS_WARN, a step between zero debugging and
CONFIG_XFS_DEBUG.
- fix attrmulti and attrlist to fall back to vmalloc when kmalloc
fails.
* tag 'for-linus-v3.10-rc1-2' of git://oss.sgi.com/xfs/xfs:
xfs: fallback to vmalloc for large buffers in xfs_compat_attrlist_by_handle
xfs: fallback to vmalloc for large buffers in xfs_attrlist_by_handle
xfs: introduce CONFIG_XFS_WARN
commit 6cd2c7db4 (videomode: videomode_from_timing work) changed the name of
the function from videomode_from_timing() to videomode_from_timings().
commit 32ed6ef1 (videomode: create enum for videomode's display flags) changed
the 'data_flags' field in videomode structure to 'flags'
Adapt to these changes in order to fix the following errors:
drivers/video/mxsfb.c:761:3: error: too many arguments to function 'videomode_from_timing'
drivers/video/mxsfb.c:761:7: error: void value not ignored as it ought to be
drivers/video/mxsfb.c:768:9: error: 'struct videomode' has no member named 'data_flags'
drivers/video/mxsfb.c:770:9: error: 'struct videomode' has no member named 'data_flags'
Also, select VIDEOMODE_HELPER instead of OF_VIDEOMODE, as this one is
deprecated.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Since commit 657eee7 (media: coda: use genalloc API) the following build
error happens with imx_v4_v5_defconfig:
drivers/built-in.o: In function 'coda_remove':
clk-composite.c:(.text+0x112180): undefined reference to 'gen_pool_free'
drivers/built-in.o: In function 'coda_probe':
clk-composite.c:(.text+0x112310): undefined reference to 'of_get_named_gen_pool'
clk-composite.c:(.text+0x1123f4): undefined reference to 'gen_pool_alloc'
clk-composite.c:(.text+0x11240c): undefined reference to 'gen_pool_virt_to_phys'
clk-composite.c:(.text+0x112458): undefined reference to 'dev_get_gen_pool'
Select GENERIC_ALLOCATOR and get rid of the custom IRAM_ALLOC.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit bca7a5a (ARM: cpu hotplug: remove majority of cache flushing
from platforms) removes include of <asm/cacheflush.h> and hence
discovers a few indirect inclusion and declaration problems as below.
CC arch/arm/mach-imx/hotplug.o
In file included from arch/arm/mach-imx/hotplug.c:16:0:
arch/arm/mach-imx/common.h💯29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default]
arch/arm/mach-imx/common.h💯29: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
arch/arm/mach-imx/common.h:101:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default]
arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_die’:
arch/arm/mach-imx/hotplug.c:53:2: error: implicit declaration of function ‘cpu_do_idle’ [-Werror=implicit-function-declaration]
arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_kill’:
arch/arm/mach-imx/hotplug.c:58:26: error: ‘jiffies’ undeclared (first use in this function)
arch/arm/mach-imx/hotplug.c:58:26: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/mach-imx/hotplug.c:58:2: error: implicit declaration of function ‘msecs_to_jiffies’ [-Werror=implicit-function-declaration]
arch/arm/mach-imx/hotplug.c:61:3: error: implicit declaration of function ‘time_after’ [-Werror=implicit-function-declaration]
Fix them by adding the needed inclusion and declaration.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
* late/fixes:
ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP
ARM: ux500: always select ABX500_CORE
ARM: SIRF: select SMP_ON_UP only on SMP builds
ARM: SPEAr: conditionalize l2x0 support
ARM: imx: build CPU suspend code only when needed
ARM: OMAP: build SMP code only for OMAP4/5
ARM: tegra: Tegra114 needs CPU_FREQ_TABLE
ARM: default machine descriptor for multiplatform
Signed-off-by: Olof Johansson <olof@lixom.net>
