rv3028_clkout_set_rate unconditionally sets RV3028_CLKOUT_CLKOE but
clk_set_rate may be called with the clock disabled. Ensure the clock is
kept disabled if it was not yet enabled.
Also, the actual rate was overwritten when enabling the clock, properly
write to the register only once.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-1-alexandre.belloni@bootlin.com
Removing the struct member "dev" in mt6397 RTC driver because it's not
initialized and the only usage is for one debugging message.
Also fixed a typo in the error message.
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201008093414.1911699-1-fshao@chromium.org
Since the switch to using regmap this function no longer takes the
I2C client struct as argument nor do we even interact with the client
anywhere other than when creating the regmap.
Rename it to a less misleading name: "rx8010_init()".
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917114656.9036-1-brgl@bgdev.pl
The ds1307 charger infrastructure now allows to add a rx8130 charger
setup that..
- does not depend on trickle-resistor-ohms
- does not use DS13XX_TRICKLE_CHARGER_MAGIC trickle-charge select (TCS)
bits
- keeps previous no-charge behavior for device trees without
aux-voltage-chargeable
Make that happen.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-9-bst@pengutronix.de
Prefer aux-voltage-chargeable over trickle-diode-disable and set diode
accordingly. This is then passed to the chip's appropriate charge setup
function.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-8-bst@pengutronix.de
Some RTC's batteries and supercaps were charged by default until now.
In contrast other RTCs allow charging but the driver did not configure
them to do so until now. These must not be charged by default to stay
backwards compatible.
In order to do that, store the charge default per chip.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-7-bst@pengutronix.de
Make trickle-resistor-ohms optional for charging setups that do not
require specifying ROUT bits (specifying the resistor value between Vcc
and Vbackup). In order to allow specifying that, introduce
requires_trickle_resistor per chip.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-6-bst@pengutronix.de
DS13XX_TRICKLE_CHARGER_MAGIC sets the trickle-charge select (TCS) bits
(7..4). The datasheet of Maxim Integrated's DS1339 [1] for instance
reads:
"To prevent accidental enabling, only a pattern on 1010 enables the
trickle charger. All other patterns disable the trickle charger."
Since not all RTCs connected to a backup battery or supercap use these
bits DS13XX_TRICKLE_CHARGER_MAGIC should not get applied for all charger
setups unconditionally.
Epson's RX8130 is such an example: Instead of TCS bits "SMPTSEL1",
"SMPTSEL0", "CHGEN" and "INIEN" are expected as bit 7..4.
DS1339 and DS1340 are currently the only RTCs in the ds1307 driver that
apply DS13XX_TRICKLE_CHARGER_MAGIC to their setup register value. So
apply DS13XX_TRICKLE_CHARGER_MAGIC in do_trickle_setup_ds1339() which
is used by both RTCs.
[1] https://datasheets.maximintegrated.com/en/ds/DS1339-DS1339U.pdf
[2] https://support.epson.biz/td/api/doc_check.php?dl=app_RX8130CE
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-5-bst@pengutronix.de
Epson's RX8130 was not charged before. A related patch will allow
optional charging.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200917183246.19446-4-bst@pengutronix.de
trickle-diode-disable is deprecated, so reflect that in the driver's
binding and add the new aux-voltage-chargeable.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200917183246.19446-3-bst@pengutronix.de
Some RTCs can be equipped with a chargeable battery or supercap.
Every RTC allowing this whose driver's implement it are charged by
default. To disable this the trickle-diode-disable flag exists.
If a driver did not support charging and some time later one wants to
add that feature, there is currently no way to do it without breaking
dt backwards compatibility. RTCs on boards without the
trickle-diode-disable flag in their device tree would suddenly charge
their battery/supercap which is a change in behavior.
Change that by introducing aux-voltage-chargeable, not as a flag but as
a uint32 enum allowing to set "do not charge" (0) or "charge" (1). This
dt property is optional, so we can now distinguish these cases.
Care must be taken to support the old behavior for device trees without
aux-voltage-chargeable nonetheless to stay compatible.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200917183246.19446-2-bst@pengutronix.de
Fix a bug when not specify interrupts property in dts
as follows,
rtc-pcf2127-i2c 1-0051: failed to request alarm irq
rtc-pcf2127-i2c: probe of 1-0051 failed with error -22
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200915073213.12779-1-biwen.li@oss.nxp.com
ds1685_rtc_begin_data_access() tried to access an extended register before
enabling access to it by switching to bank 1. Depending on content in NVRAM
this could lead to an endless loop. While at it fix also switch back to
bank 0 in ds1685_rtc_end_data_access().
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20200910084124.138560-1-tsbogend@alpha.franken.de
The only usage of st_rtc_ops is to assign its address to the ops field
in the rtc_device struct. which is a const pointer. Make it const to
allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200913122644.35515-1-rikard.falkeborn@gmail.com
We don't need to check the time range manually in set_time(), we can
use range_min and range_max exposed by struct rtc_device.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-15-brgl@bgdev.pl
This driver requires SMBUS to work. We can relax this requirement if we
switch to using i2c regmap and let the regmap sub-system figure out how
to talk to the bus.
This also has the advantage of shrinking the code for register updates.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-14-brgl@bgdev.pl
We should generally use probe_new instead of probe when registering i2c
drivers. Convert rx8010 to using it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-13-brgl@bgdev.pl
Using the size of the variable is preferred over using the size of its
type when allocating memory. Convert the call to devm_kzalloc() in
probe().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-11-brgl@bgdev.pl
Simple 'dev' looks better then repeated &client->dev and has the added
benefit of avoiding unnecessary line breaks.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-10-brgl@bgdev.pl
The 'err' local variable in rx8010_init_client() doesn't need to be
initialized.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-9-brgl@bgdev.pl
The time buffer len is used directly in this driver. For readability
it's better to define it as the difference between the date register
offsets and use sizeof() whenever referencing it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-8-brgl@bgdev.pl
All other functions in this driver use 'err' for integer return values.
Do the same in rx8010_set_time() for consistency.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-7-brgl@bgdev.pl
The define values in this driver are close to their names and they are
separated by spaces. Use tabs instead and align all defines.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-6-brgl@bgdev.pl
Move local variables of the same type into a single line for better
readability.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-5-brgl@bgdev.pl
The way the driver is implemented is buggy for the (admittedly unlikely)
use case where there are two RTCs with one having an interrupt configured
and the second not. This is caused by the fact that we use a global
rtc_class_ops struct which we modify depending on whether the irq number
is present or not.
Fix it by using two const ops structs with and without alarm operations.
While at it: not being able to request a configured interrupt is an error
so don't ignore it and bail out of probe().
Fixes: ed13d89b08 ("rtc: Add Epson RX8010SJ RTC driver")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200830080937.14367-1-krzk@kernel.org
Original device id would conflict with crypto driver, change it.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200818063609.39859-1-ran.wang_1@nxp.com
Ensure the OSF flag is cleared on the DS1388 when the clock is set.
Fixes: df11b323b1 ("rtc: ds1307: handle oscillator failure flags for ds1388 variant")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200818013543.4283-1-chris.packham@alliedtelesis.co.nz
Similar to the other variants the DS1388 has a bit to stop the
oscillator to reduce the power consumption from VBAT. Ensure that the
oscillator is enabled when the system is up.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200816235731.21071-1-chris.packham@alliedtelesis.co.nz
rs5c313_rtc_init() calls platform_driver_register(), and initializes the
hardware. This is wrong because of two reasons:
1. As soon as the driver has been registered, the device may be
probed. If devm_rtc_device_register() is called before hardware
initialization, reading the current time will fail:
rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error
rs5c313 rs5c313: registered as rtc0
rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error
rs5c313 rs5c313: hctosys: unable to read the hardware clock
2. If the platform device does not exist, the driver will still write
to a hardware device that may not be present.
Fix this by moving the hardware initialization sequence to the driver's
.probe() method.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814110731.29029-3-geert+renesas@glider.be
Commit 284e2fa1da ("rtc: rtc-rs5c313: use
devm_rtc_device_register()"), removed the last user of the
driver-specific data. Hence there is no longer a need to set it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814110731.29029-2-geert+renesas@glider.be
cmos_read_alarm() may leave certain fields of a struct rtc_wkalrm
untouched; therefore, these fields contain garbage if not properly
initialized, leading to inconsistent values when converting into
time64_t. This patch to zero initialize the struct before calling
cmos_read_alarm().
Note that this patch is not intended to produce a correct time64_t, it
is only to produce a consistent value. In the case of suspend/resume, a
correct time64_t is not necessary; a consistent value is sufficient to
correctly perform an equality test for t_current_expires and
t_saved_expires. Logic to deduce a correct time64_t is expensive and
hence should be avoided.
Signed-off-by: Victor Ding <victording@google.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814191654.v2.1.Iaf7638a2f2a87ff68d85fcb8dec615e41340c97f@changeid
-----BEGIN PGP SIGNATURE-----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=T+fx
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few differerent things in here.
Seems like syzbot got some more io_uring bits wired up, and we got a
handful of reports and the associated fixes are in here.
General fixes too, and a lot of them marked for stable.
Lastly, a bit of fallout from the async buffered reads, where we now
more easily trigger short reads. Some applications don't really like
that, so the io_read() code now handles short reads internally, and
got a cleanup along the way so that it's now easier to read (and
documented). We're now passing tests that failed before"
* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
io_uring: short circuit -EAGAIN for blocking read attempt
io_uring: sanitize double poll handling
io_uring: internally retry short reads
io_uring: retain iov_iter state over io_read/io_write calls
task_work: only grab task signal lock when needed
io_uring: enable lookup of links holding inflight files
io_uring: fail poll arm on queue proc failure
io_uring: hold 'ctx' reference around task_work queue + execute
fs: RWF_NOWAIT should imply IOCB_NOIO
io_uring: defer file table grabbing request cleanup for locked requests
io_uring: add missing REQ_F_COMP_LOCKED for nested requests
io_uring: fix recursive completion locking on oveflow flush
io_uring: use TWA_SIGNAL for task_work uncondtionally
io_uring: account locked memory before potential error case
io_uring: set ctx sq/cq entry count earlier
io_uring: Fix NULL pointer dereference in loop_rw_iter()
io_uring: add comments on how the async buffered read retry works
io_uring: io_async_buf_func() need not test page bit
Commit 1355c31eeb ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.
Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.
Fixes: 1355c31eeb ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=10Pr
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes on the block side of things:
- Discard granularity fix (Coly)
- rnbd cleanups (Guoqing)
- md error handling fix (Dan)
- md sysfs fix (Junxiao)
- Fix flush request accounting, which caused an IO slowdown for some
configurations (Ming)
- Properly propagate loop flag for partition scanning (Lennart)"
* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
block: fix double account of flush request's driver tag
loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
rnbd: no need to set bi_end_io in rnbd_bio_map_kern
rnbd: remove rnbd_dev_submit_io
md-cluster: Fix potential error pointer dereference in resize_bitmaps()
block: check queue's limits.discard_granularity in __blkdev_issue_discard()
md: get sysfs entry after redundancy attr group create
I collected a single fix during the merge window: we managed to break the early
trap setup on !MMU, this patch fixes it.
The power keeps going on here so I haven't have a chance to give this the
testing I usually would, but I don't have a Kendryte anyway so I doubt I'd pick
up anything subtle even if I was to test. The patch seems pretty safe and it's
still early, so I don't see any reason to let it sit around.
It's fairly late so if it misses the merge window that's not a big deal. I'll
definately have stuff for next week, so I'll just start from whenever this
lands.
-----BEGIN PGP SIGNATURE-----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=+8KT
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"I collected a single fix during the merge window: we managed to break
the early trap setup on !MMU, this fixes it"
* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Setup exception vector for nommu platform
changes to arch/sh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJfODUiAAoJELcQ+SIFb8Hau0wH/iPeZyv0EhIwL41OPrWhm5wb
26MNWPvPjYIpKVpr0HMXiffILv595ntvrH0Ujnh1+e8J2kRj0eT+T91UkoyGSfav
oWmjgcG3NRK6p9882Oo8Xavjr1cTTclOmmDInR4lpAcfIBXkeq2eX0R1h2IuGdNM
idGlXhJMkgV+xTlgZy7pYmw5pvFMqL5j7fAUQxm0UoY9kbu8Ac4bOR5WrqtFpkjt
xTh9141YvSSfpRx9uMzrQLuUYGzGePhnjUGSUf/b1deYG/33lNtzhHr+QMK6BpXr
zdhFalJP40+m+2tG0nCBpAIZcWiOLGb23in5n/trFx3BGZfUf5EKnhZEGUYeE7Q=
=XWDn
-----END PGP SIGNATURE-----
Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.
Fixes: 227c0c9673 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.
Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().
Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.
Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes: 18bceab101 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes:
- Fixes for 'perf bench numa'.
- Always memset source before memcpy in 'perf bench mem'.
- Quote CC and CXX for their arguments to fix build in environments using
those variables to pass more than just the compiler names.
- Fix module symbol processing, addressing regression detected via "perf test".
- Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry.
Improvements:
- Add script to autogenerate socket family name id->string table from copy of
kernel header, used so far in 'perf trace'.
- 'perf ftrace' improvements to provide similar options for this utility so
that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just
by changing the name of the subcommand.
- Prefer new "sched:sched_waking" trace event when it exists in 'perf sched'
post processing.
- Update POWER9 metrics to utilize other metrics.
- Fall back to querying debuginfod if debuginfo not found locally.
Miscellaneous:
- Sync various kvm headers with kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
fedora:rawhide with python3 and gcc 10.1.1-2 is failing (10.1.1-1 on fedora:32
works), fixes will be provided soon.
clearlinux:latest is failing on libbpf, there is a fix already in the bpf tree.
# export PERF_TARBALL=http://192.168.124.1/perf/perf-5.8.0.tar.xz
# dm
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 alpine:3.11 : Ok gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 alpine:edge : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
11 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
13 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
14 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
19 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
20 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
21 clearlinux:latest : FAIL gcc (Clear Linux OS for Intel Architecture) 10.2.1 20200723 releases/gcc-10.2.0-3-g677b80db41, clang version 10.0.1
22 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
25 debian:experimental : Ok gcc (Debian 10.2.0-3) 10.2.0, Debian clang version 11.0.0-+rc1-1
26 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
27 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
28 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
29 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
30 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
31 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
32 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
33 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
34 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
35 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
36 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
37 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
38 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
39 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
40 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
41 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
42 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
43 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
44 fedora:32 : Ok gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-2.fc32)
45 fedora:rawhide : FAIL gcc (GCC) 10.2.1 20200804 (Red Hat 10.2.1-2), clang version 10.0.0 (Fedora 10.0.0-11.fc33)
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
1595 | PyMODINIT_FUNC (*initfunc)(void);
| ^~~~~~~~~~~~~~
46 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
47 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
48 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
49 mageia:7 : Ok gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
50 manjaro:latest : Ok gcc (GCC) 9.2.0, clang version 9.0.0 (tags/RELEASE_900/final)
51 openmandriva:cooker : Ok gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
52 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
53 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
54 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
55 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
56 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200728 [revision c0438ced53bcf57e4ebb1c38c226e41571aca892], clang version 10.0.1
57 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
58 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.5)
59 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
60 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
61 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
62 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
63 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
69 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
70 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
71 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
72 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
74 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
75 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
79 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
80 ubuntu:18.10 : Ok gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
81 ubuntu:19.04 : Ok gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
82 ubuntu:19.04-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
83 ubuntu:19.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
84 ubuntu:19.04-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
85 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
86 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
#
# git log --oneline -1
492e4edba6 (HEAD -> perf/core) perf ftrace: Make option description initials all capital letters
# perf -vv
perf version 5.8.g492e4edba6e2
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
gtk2: [ on ] # HAVE_GTK2_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# uname -a
Linux quaco 5.7.14-200.fc32.x86_64 #1 SMP Fri Aug 7 23:16:37 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Skip (some metrics failed)
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: x86 rdpmc : Ok
69: Convert perf time to TSC : Ok
70: DWARF unwind : Ok
71: x86 instruction decoder - new instructions : Ok
72: Intel PT packet decoder : Ok
73: x86 bp modify : Ok
74: probe libc's inet_pton & backtrace it with ping : Ok
75: Use vfs_getname probe to get syscall args filenames : Ok
76: Add vfs_getname probe to get syscall args filenames : Ok
77: Check open filename arg using perf trace + vfs_getname: Ok
78: Zstd perf.data compression/decompression : Ok
#
$ cd ~acme/git/perf ; git log --oneline -1 ; time make -C tools/perf build-test
492e4edba6 (HEAD -> perf/core) perf ftrace: Make option description initials all capital letters
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_clean_all_O: make clean all
make_cscope_O: make cscope
make_install_prefix_O: make install prefix=/tmp/krava
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_install_bin_O: make install-bin
make_perf_o_O: make perf.o
make_install_O: make install
make_no_sdt_O: make NO_SDT=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_gtk2_O: make NO_GTK2=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_no_demangle_O: make NO_DEMANGLE=1
make_debug_O: make DEBUG=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_help_O: make help
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_newt_O: make NO_NEWT=1
make_no_slang_O: make NO_SLANG=1
make_util_map_o_O: make util/map.o
make_no_auxtrace_O: make NO_AUXTRACE=1
make_doc_O: make doc
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_libelf_O: make NO_LIBELF=1
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_no_libbpf_O: make NO_LIBBPF=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_no_libperl_O: make NO_LIBPERL=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_with_babeltrace_O: make LIBBABELTRACE=1
make_pure_O: make
make_with_libpfm4_O: make LIBPFM4=1
make_tags_O: make tags
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXzbOAgAKCRCyPKLppCJ+
J3W5AQCnQL+x8b8o3a3kvZcvABrZmopaMTomjMbyhnSGGNTYLQD9FFCL4+Z9F5yB
+82safSVWYLc8toOZnyKC3nzKiLsKQ0=
=CnTh
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Fixes:
- Fixes for 'perf bench numa'.
- Always memset source before memcpy in 'perf bench mem'.
- Quote CC and CXX for their arguments to fix build in environments
using those variables to pass more than just the compiler names.
- Fix module symbol processing, addressing regression detected via
"perf test".
- Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
test' entry.
Improvements:
- Add script to autogenerate socket family name id->string table from
copy of kernel header, used so far in 'perf trace'.
- 'perf ftrace' improvements to provide similar options for this
utility so that one can go from 'perf record', 'perf trace', etc to
'perf ftrace' just by changing the name of the subcommand.
- Prefer new "sched:sched_waking" trace event when it exists in 'perf
sched' post processing.
- Update POWER9 metrics to utilize other metrics.
- Fall back to querying debuginfod if debuginfo not found locally.
Miscellaneous:
- Sync various kvm headers with kernel sources"
* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
perf ftrace: Make option description initials all capital letters
perf build-ids: Fall back to debuginfod query if debuginfo not found
perf bench numa: Remove dead code in parse_nodes_opt()
perf stat: Update POWER9 metrics to utilize other metrics
perf ftrace: Add change log
perf: ftrace: Add set_tracing_options() to set all trace options
perf ftrace: Add option --tid to filter by thread id
perf ftrace: Add option -D/--delay to delay tracing
perf: ftrace: Allow set graph depth by '--graph-opts'
perf ftrace: Add support for trace option tracing_thresh
perf ftrace: Add option 'verbose' to show more info for graph tracer
perf ftrace: Add support for tracing option 'irq-info'
perf ftrace: Add support for trace option funcgraph-irqs
perf ftrace: Add support for trace option sleep-time
perf ftrace: Add support for tracing option 'func_stack_trace'
perf tools: Add general function to parse sublevel options
perf ftrace: Add option '--inherit' to trace children processes
perf ftrace: Show trace column header
perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
perf ftrace: Factor out function write_tracing_file_int()
...
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl83ybgRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1iJnQ/+OAkE5hiQ+F1ikQ4rKyjaT6FjvynReNUA
ysQjcCypGB4x+slR8o3k5yrzYJ9WbDfOz7a0uekZtNHvJ80+3yheV5Yvf+Uz3EYM
Jj/OubCNMNnvS5cJMNXs196SGd/ELLWBbCjwUWPsiWJ0ZMTgKmpZz1LgB1QZjhyw
fbAc1WgTLVO+emE5FwBrmFzvgBxn5EtiFoLhegFtACHadNcJLiKpXpiK3NKkEirO
owF1/Qg6mn6MowKDBDkWgmwi0HVYbraqu0hXRrCq9o105CVwgwUdORTwjK3rnUNs
et10Zz2UmSpjXJOhKZdZLFCtYOmrADmS4pnoXF6W6cLLFvkq4b2ducnlFBtNKqMh
ljPkIT04sF99gIKijEYWsru+MgS4qO1VNHtJxkr/ZCUjqahsa1nN9F0lP0QOXjwf
hbK4h1NrML3UiCGAe2hjIh9zY2c8s2Q90PyCvZkKNKquSQ1E011hzcEE2RIoBBYB
mc1d6lgfCFWVkbgRA5sx1CVtgnAvHk2wu9w/8N9XTGjPgiQJRr3I8cNUZw59gaMH
43auWyvpVAA4vdfbKJrPVrTLhTTnQYv0A966l7/i0d8MkGN4u09sAiB3ZevZMEK9
45b7IXWluCi0ikBAmCvQ+qEzhg7pApCziVKuaZ/4j+qPLTDAutGwz7YuaXyOKrUX
Aj/uCev6D6c=
=fvpv
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes and small updates all around the place:
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by
Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of
PREEMPT_RT"
* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Acquire pte lock with interrupts enabled
x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
x86/purgatory: Don't generate debug info for purgatory.ro
x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
kexec_file: Correctly output debugging information for the PT_LOAD ELF header
kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
x86/crash: Correct the address boundary of function parameters
x86/acrn: Remove redundant chars from ACRN signature
x86/acrn: Allow ACRN guest to use X2APIC mode
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ffEv
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two fixes: fix a new tracepoint's output value, and fix the formatting
of show-state syslog printouts"
* tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix the alignment of the show-state debug output
sched: Fix use of count for nr_running tracepoint
