The `DAS08JR_DIO` macro contains the offset to the read-only digital
input register and write-only digital output register on the "JR"
boards. Replace the macro with two new macros (with the same numeric
value) named `DAS08JR_DI_REG` for the digital input register and
`DAS08JR_DO_REG` for the digital output register, and add some comments.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_DO_MASK` macro is a bitmask for the control register
corresponding to the digital output channels (except on "JR" boards).
Rename it to `DAS08_CONTROL_DO_MASK` and add a comment.
The `DAS08_OP(x)` macro takes a bitvector of the desired digital output
channel states and returns the corresponding bits for the control
register (except on "JR" boards). Rename it to `DAS08_CONTROL_DO(x)`
and add a comment.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_INTE` macro contains a mask for the "INTE" bit in the control
register (except on "JR" boards). Setting it to 1 enables interrupts.
Setting it to 0 disables interrupts and clears the "IRQ" bit in the
status register. Rename the macro to `DAS08_CONTROL_INTE` and add a
comment. Also use the `BIT()` macro to define its value. (Note: the
driver does not currently enable interrupts.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_MUX_MASK` macro is a bitmask for the control register
corresponding to the analog input multiplexor channel selection bits.
Rename it to `DAS08_CONTROL_MUX_MASK` and add a comment. Note that the
current setting of the multiplexor can also be read from the same bit
positions in the status register, but the driver does not use it. Add a
comment to that effect.
The `DAS08_MUX(x)` macro takes an analog input channel number and
returns the corresponding analog input multiplexor channel selection
bits for the control register. Rename it to `DAS08_CONTROL_MUX(x)` and
add a comment.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_CONTROL` macro contains the offset to the write-only control
register. Rename it to `DAS08_CONTROL_REG` and add a comment.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_IP()` macro takes a value read from the status register and
returns the state of the three digital input channels (except on "JR"
boards). Rename it to `DAS08_STATUS_DI()` and add a comment. Also
re-arrange the expression used to extract the state of the digital
inputs for consistency with other register macros.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_IRQ` macro contains a mask for the "IRQ" status bit. This is
set to 1 when a rising edge is detected on the external interrupt input
pin of the external connector (which may be jumpered to a pacer output).
It is cleared by setting the "INTE" control bit to 0. It is not used on
"JR" boards. Rename the macro to `DAS08_STATUS_IRQ` and add a comment.
Also use the `BIT()` macro to define the value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_EOC` macro contains a mask for the "end of A/D conversion"
bit in the status register. The logic is reverse sense in that the bit
is set to 1 while the conversion is in progress and set to 0 when the
conversion is complete. Rename the macro to `DAS08_STATUS_AI_BUSY` and
add a comment. Also make use of the `BIT()` macro to define the value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_STATUS` macro contains the offset to the read-only status
register. Rename it to `DAS08_STATUS_REG` and add a comment.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_TRIG_12BIT` macro contains the offset to the write-only
software trigger register for 12-bit or 16-bit analog-to-digital
conversions. Rename the macro to `DAS08_AI_TRIG_REG` and add a comment.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `DAS08_LSB` and `DAS08_MSB` macros contain the offsets to the
least-significant and most-significant analog input data registers.
Rename them to `DAS08_AI_LSB_REG` and `DAS08_AI_MSB_REG` respectively
and add comments to document them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Comedi "das08.h" header file is included by drivers for the
ComputerBoards/MeasurementComputing and Keithley Metrabyte boards in the
DAS08 series. It does not compile cleanly when it is the first header
included by the ".c" file. It uses `struct comedi_device *` in the
parameter list of a function prototype, so just declare `struct
comedi_device` as an incomplete type. It also uses `bool`, so include
<linux/types.h> to declare it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`das08_ai_rinsn()` handles Comedi `INSN_READ` instructions for the AI
subdevice. This programs the gain for the analog input channel if the
board has support for that, and acquires data from the channel. If
programmable gain is supported, the gain code is read from the array
pointed to by `devpriv->pg_gainlist` indexed by the range index. The
function assumes that programmable gain is supported if the AI
subdevice's range table supports more than one range. Replace that with
a more direct test for `devpriv->pg_gainlist` being non-NULL, as it is
only initialized to a non-NULL pointer for boards that support
programmable gain.
This will also allow range tables to be included for convenience for
those boards that support multiple ranges by DIP switches. Those boards
are currently initialized to use a single "unknown" range.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "das08" common module for DAS08 ISA, PCI, and PCMCIA drivers
includes a predefined set of AI range tables. The static board data (of
type `struct das08_board_struct`) for a particular board contains an
index in its `ai_pg` member (of type `enum das08_lrange`) indicating
which of the predefined AI range tables to use. The "das08" common
module looks up this index in `das08_ai_lranges[]` to get a pointer to
the predefined range table for the board. The same index is also looked
up in `das08_gainlists[]` to get a corresponding pointer to a list of
hardware gain values for each range supported by the board (NULL for
boards without programmable gain).
To make this clearer, used indexed initializers for `das08_ai_lranges[]`
and `das08_gainlists[]`, using the enumerated constants from `enum
das08_lrange` as the indices. Also add a short comment to the
definition of `enum das08_lrange`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformat remaining comments to use the preferred style for single-line
and block comments.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The copyright header comment includes a single-line description saying
it is for "das08.c" and "das08_cs.c". However, it is also used by
"das08_isa.c" and "das08_pci.c". Update the description to say it is
for common DAS08 support, similar to description in "das08.c" (the
common module for the DAS08 ISA/PCI/PCMCIA drivers).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Normally, low-level Comedi drivers set an `insn_bits` handler for
digital input (DI), digital output (DO) and digital input/output (DIO)
subdevice types to handle normal reading and writing of digital
channels. The "cb_pcimdas" driver currently has an `insn_read` handler
for the DI subdevice and an `insn_write` handler for the DO subdevice.
However, the actual handler functions `cb_pcimdas_di_insn_read()` and
`cb_pcimdas_do_insn_write()` are written to behave like `insn_bits`
handlers. Something's wrong there! To fix it, set the functions as
`insn_bits` handlers and rename them for consistency.
Fixes: e56d03dee1 ("staging: comedi: cb_pcimdas: add main connector digital input/output")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Point to the right place for GNU license. Update Intel copyright.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle all the style issues reported by checkpatch.pl.
Remove general white spaces, spaces in function calls,
alignments etc.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the functions LNetInit and LNetFini move away from
camel case to lnet_init and lnet_fini.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the lnet headers used by user land contain various internal
LNet structures that are only used by kernel space. Move the user land
structures to headers used by user land. The kernel structures are
relocated to headers that are never exposed to user land.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently several special macros LNet NID macros exist
in libcfs.h and libcfs_private.h. Move those macros
out to the lnet header types.h. The new lnet header
nidstr.h contains LNet NID string data that can be
used by user land LNet utilities and the LNet kernel
drivers.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Originally socklnd_lib-linux.h contained linux specific
wrappers and defines but since the linux kernel is the
only supported platform now we can merge what little
remains in the header into socklnd.h. This is broken
out of the original patch 12932 that was merged to the
Intel/OpenSFS branch.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/12932
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the move to support only the linux kernel their is
no need to keep "linux" in the socklnd source file names.
This is broken out of the original patch 12932 that was
merged to the Intel/OpenSFS branch.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/12932
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the linux specific headers from lnet/include/lnet/linux/,
moving whatever was worthwhile from them to their parent headers or
elsewhere.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/12932
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove ralnd, ptllnd, mxlnd, qswlnd drivers. They are no
longer supported and have not even been buildable
for a long time.
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6209
Reviewed-on: http://review.whamcloud.com/13663
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
change own data type(WILC_BOOL) to common data type(bool)
but that's contain true/false value. so change with them.
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces the kmalloc followed by copy_from_user by the
wrapper routine memdup_user.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver has odd message in print string.
So this patch removes the data type.
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
size_t should print using %zu, but here it was use %lu.
we were getting warning while printing.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ptr,size;
@@
- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)
@@
expression ptr,size;
@@
- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ptr,size;
@@
- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)
@@
expression ptr,size;
@@
- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ptr,size;
@@
- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)
@@
expression ptr,size;
@@
- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ptr,size;
@@
- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)
@@
expression ptr,size;
@@
- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ptr,size;
@@
- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)
@@
expression ptr,size;
@@
- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ptr,size;
@@
- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)
@@
expression ptr,size;
@@
- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ptr,size;
@@
- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)
@@
expression ptr,size;
@@
- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
strncpy_from_user could return negative values on error,
so need to take those into account.
Since ll_getname is used to get a single component name from userspace
to transfer to server as-is, there's no need to allocate 4k buffer
as done by __getname. Allocate NAME_MAX+1 buffer instead to ensure
we have enough for a null terminated max valid length buffer.
This was discovered by Al Viro in https://lkml.org/lkml/2015/4/11/243
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It uses getname in unsafe manner and since it's to deal with corrupted
or inconsistent filesystem, we are probably better to deal with
it from lfsck anyway.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
