Convert the ion ioctls to use _IOW instead of _IOWR where
appropriate, and factor out the copy_from_user and copy_to_user
based on the _IOC_DIR bits. For the existing incorrect ioctls,
add a function to wrap _IOC_DIR to return the corrected value.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ion_system_contig_heap buffers have an sglist, just call
ion_heap_map_user to map it.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use %z for size_t and %pa for dma_addr_t to avoid warnings in printks.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phys_to_page and __phys_to_pfn don't exist on all platforms.
Use a combination of pfn_to_page, PFN_DOWN, page_to_pfn, and
virt_to_page to get the same results.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ion_heap_map_kernel already implements mapping a scatterlist of
pages into the kernel, and all heaps are required to have struct
pages associated with them, so delete the functions that use
__arm_ioremap and use ion_heap_map_kernel instead.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use idr_alloc instead if idr_pre_get/idr_get_new_above, and
remove idr_remove_all.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a /dev/ion-test device that will be created if CONFIG_ION_TEST
is set. The device accepts a dma_buf fd and allows reading and
writing to the backing memory using DMA-like apis or kernel mapping
apis. Can be used to test the dma_buf mapping ops, including
the ion implementations, from userspace.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ion_system_heap can only satisfy page alignment, and
ion_system_contig_heap can only satisify alignment to the
allocation size. Neither can support faulting user mappings
because they use slab pages.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ion is always dealing with the allocation and not the mapping,
so it should always be using sg->length and not sg->dma_length.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__dma_page_cpu_to_dev is a private ARM api that is not available
on 3.10 and was never available on other architectures. We can
get the same behavior by calling dma_sync_sg_for_device with a
scatterlist containing a single page. It's still not quite a
kosher use of the dma apis, we still conflate physical addresses
with bus addresses, but it should at least compile on all
platforms, and work on any platform that doesn't have a physical
to bus address translation.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If userspace passes a length between -4095 and -1 to allocate it
will pass the len != 0 check, but when len is page aligned it will
be 0. Check len after page aligning.
Drop the warning as well, userspace shouldn't be able to trigger
a warning in the kernel.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1262ab1846cf76f7549c66ef709120dbfbe6d49f (ion: replace
userspace handle cookies with idr) broke the locking in ion.
The ION_IOC_FREE and ION_IOC_MAP ioctls were relying on
ion_handle_validate to detect the case where a call raced
with another ION_IOC_FREE which may have freed the struct
ion_handle.
Rename ion_uhandle_get to ion_handle_get_by_id, and have it
take the client lock and return with an extra reference to
the handle. Make each caller put its reference once it
is done with the handle.
Also modify users of ion_handle_validate to continue to hold
the client lock after calling ion_handle_validate until
they are done with the handle, and warn if ion_handle_validate
is called without the client lock held.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The compat support added to ion didn't provide compat ioctl numbers
(who's value depends on the compat structure size). So 32bit
applications would get an error when trying to make ioctl calls.
This patch adds the needed COMPAT_ macros and uses them in the
compat_ion_ioctl, translating them to their non-compat cmd when
calling the normal ioctl call.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split the userspace api out of drivers/staging/android/ion/ion.h
into drivers/staging/android/uapi/ion.h
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mapper abstraction layer was removed before the initial ion
commit, but a stray ion_system_mapper.c file was left in. Delete
it.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a compat_ioctl to the ion driver
Signed-off-by: Rom Lemarchand <romlem@google.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn ion_user_handle_t to int. This change reflects the underlying type
returned by the ion driver.
Signed-off-by: Rom Lemarchand <romlem@google.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare new ion_user_handle_t type to contain the token returned to user-space.
This allows a 2-step migration of the user-space code to a new kernel header
first, then will allow us to change the definition of the ion_user_handle_type_t
to int without breaking the API.
Signed-off-by: Rom Lemarchand <romlem@google.com>
(cherry picked from commit ebb8269bbb05b06ecedca3e21b3e65f23d48eadd)
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ion userspace clients think that the cookie is a pointer, so they
use NULL to check if the handle has been initialized. Set the first
id number to 1.
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only remaining users of the client->handles rbtree are
iterating through it like a list. Keep the rbtree, but change
its index to be the buffer address instead of the handle address,
which makes ion_handle_lookup a fast rbtree search.
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Userspace handles should not leak kernel virtual addresses to
userspace. They have to be validated by looking them up in an
rbtree anyways, so replace them with an idr and validate them
by using idr_find to convert the id number to the struct
ion_handle pointer.
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IS_ERR_OR_NULL is often part of a bad pattern that can accidentally
return 0 on error:
if (IS_ERR_OR_NULL(ptr))
return PTR_ERR(ptr);
It also usually means that the errors of a function are not well
defined. Replace all uses in ion.c by ensure that the return
type of any function in ion is an ERR_PTR.
Specify that the expected return value from map_kernel or map_dma
heap ops is ERR_PTR, and warn if a heap returns NULL.
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ion is going to stop accepting NULL as an error value, use ERR_PTR.
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
buffer->size is controlled by the outer ion layer, don't modify it
inside the heap. Instead, compute the rounded up allocated size
on demand.
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously the code to fault ion buffers in one page at a time had a
performance problem caused by the requirement to traverse the sg list
looking for the right page to load in (a result of the fact that the items in
the list may not be of uniform size). To fix the problem, for buffers
that will be faulted in, also keep a flat array of all the pages in the buffer
to use from the fault handler. To recover some of the additional memory
footprint this creates per buffer, dirty bits used to indicate which
pages have been faulted in to the cpu are now stored in the low bit of each
page struct pointer in the page array.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New heap type ION_HEAP_TYPE_DMA where allocation is done with dma_alloc_coherent API.
device coherent_dma_mask must be set to DMA_BIT_MASK(32).
ion_platform_heap private field is used to retrieve the device linked to CMA,
if NULL the default CMA area is used.
ion_cma_get_sgtable is a copy of dma_common_get_sgtable function which should
be in kernel 3.5
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix ion_platform_heap to make is use an usual way in board configuration file.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ion code has some very specific arm-isms which keeps it
from building on other architectures. These should probably be
resolved, but in the mean time, add a dependency on CONFIG_ARM
to avoid build failures.
v2: Fix earlier flub, sending out an early untested version of
the patch.
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Rebecca Schultz Zavin <rebecca@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It no longer exists.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the system is low on memory, we want to shrink any cached
system memory ion is holding. Previously we were shrinking memory
in the page pools, but not in the deferred free list. This patch
makes it possible to shrink both. It also moves the shrinker
code into the heaps so they can correctly manage any caches they
might contain.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The high variable was sometimes used uninitialized
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allocations from the ion heap need to be zeroed to protect userspace
from seeing memory belonging to other processes. First allocations
from this heap were not zero'd allowing users to see memory from other
processes on a warm reset.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With CONFIG_SLUB_DEBUG_ON it would panic during
ion_alloc()
ion_buffer_create()
io_heap_drain_freelist()
Signed-off-by: JP Abgrall <jpa@google.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the ability for a heap to free buffers asynchrounously. Freed buffers
are placed on a free list and freed from a low priority background thread.
If allocations from a particular heap fail, the free list is drained. This
patch also enable asynchronous frees from the chunk heap.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently ion can only share buffers with dma buf fd's. Fd's can not be
used inside the kernel as they are process specific so support for
sharing buffers with dma buf kernel handles is needed to support kernel
only use cases. An example use case could be a GPU driver using ion
that wants to share its output buffers with a 3d party display
controller driver supporting dma buf.
Signed-off-by: Johan Mossberg <johan.mossberg@stericsson.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the code in the system heap used to map and zero the buffers
into a seperate utility so it can be called from other heaps. Use it from
the chunk heap.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vmap/vunmap spend a significant amount of time allocating the
address space to map into. Rather than allocating address space
for each page, instead allocate once for the entire allocation
and then just map and unmap each page into that address space.
Signed-off-by: Rebecca Schultz Zavin <rschultz@google.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The heapmask in the client generally wasn't being used. This
patch removes it.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will enable modules to allocate memory with ion.
Signed-off-by: Johan Mossberg <johan.mossberg@stericsson.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is some confusion between when to use the heap type and when
the id. This patch clarifies this by using clearer variable names
and describing the intention in the comments. Also fixes the client
debug code to print heaps by id instead of type.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for a chunk heap that allows for buffers that are
made up of a list of fixed size chunks taken from a carveout. Chunk sizes
are configured when the heaps are created by passing the chunk size in the
priv field of the heap platform data.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The system heap contained several general purpose functions to map
buffers to the kernel and userspace. This patch refactors those
into ion_heap.c so they can be used by other heaps.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switches the rbtree tree of heaps for a plist. This significantly
simplifies the code and the list is small and is modified only at
first boot so the rbtree is unnecessary. This also switches
the traversal of the heap list to traverse from highest to lowest
id's. This allows allocations to pass a heap mask that falls
back on the system heap -- typically id 0, which is the common case.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch allows you to specify a heap that requires carveout memory
but that doesn't specify a start address. Memblock_alloc will be called
to find a location for these heaps.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use atomic_read to get the refcount value to avoid compilation warning
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when using carveout heap ion_buffer_create function failed because
map_dma and unmap_dma operations aren't set by carveout heap.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
