forked from luck/tmp_suning_uos_patched
df3f61d2cd
2284 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jonathan Marek
|
df3f61d2cd |
dt-bindings: clock: add SM8150 QCOM video clock bindings
Add device tree bindings for video clock controller for SM8150 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200923160635.28370-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Konrad Dybcio
|
8c18b41b39 |
clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs
This change adds GDSCs, resets and most of the missing clocks to the msm8994 GCC driver. The remaining ones are of local_vote_clk and gate_clk type, which are not yet supported upstream. Also reorder them to match the original downstream driver. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20201005145855.149206-1-konradybcio@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Linus Torvalds
|
05a5b5d8a2 |
Here's some more updates that missed the last pull request because I
happened to tag the tree at an earlier point in the history of clk-next. I must have fat fingered it and checked out an older version of clk-next on this second computer I'm using. This time it actually includes more code for Qualcomm SoCs, the AT91 major updates, and some Rockchip SoC clk driver updates as well. I've corrected this flow so this shouldn't happen again. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl80J28RHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVEkRAArVaHkGME9FLC2eOtfh5JSBAITIyvUxXh 6+DVGxt29Rfp24/IL7P05DfDtw402qDnkfeeF7dljgSqS9BimsF5DP2EnLec9j6y EZqZzThMyuS6+UyZ/QSyzpDITqemA9dOccmtve3QPOkgn6BZcfUJGqwIk47Dd/wA udOZCPm+HR4d7H8nzhsfDBIOCPueOV/zDVKPWNSDuuRVLKHOW7OPUvTNo5ZBrOBj 3w6Q3KqHBNVHfrl9b5MdPSEatlTU3hlmm2bskTyVpwMAHKq6H0M0jqCh03jVNRr7 woUtgRzo5KEfM52pZGQTO6U9ifIv4nKv9lIhrZAR4ql3tXGag6hQ3YMahd0sjyUc poJ13JqgLmwTw4B4mbxTS8yW86tlEBXcTc33sT22jt2TrSc5zimoavBzn7NNdzv/ AnPUyAXPJLKFQ2Rx2DNnZ87hSimpPz64MszFcuD2XZpsmohFTretyCUvjaiwQqrL 37Yt/NPo2NVx3yM6BDBs1oXFNMzYrEHpnOEKMfF4JYFHQO8bo5QCwqgiZX8sf1l2 7mQSeae7tDtrWysbJ6L+rSzOcyqCsOoWcM3H2/ydyDgSE4tA+2lU0/AD9jIs8D0U fXHRWJ4eCzGJ8hcdUUhYCMjrsQuerze4neNjYYAZRGbs8PhBKMAVbTl/TAay9rLV QesIjVqhN1o= =/8EM -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "Here's some more updates that missed the last pull request because I happened to tag the tree at an earlier point in the history of clk-next. I must have fat fingered it and checked out an older version of clk-next on this second computer I'm using. This time it actually includes more code for Qualcomm SoCs, the AT91 major updates, and some Rockchip SoC clk driver updates as well. I've corrected this flow so this shouldn't happen again" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits) clk: bcm2835: Do not use prediv with bcm2711's PLLs clk: drop unused function __clk_get_flags clk: hsdk: Fix bad dependency on IOMEM dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 clk: mmp: avoid missing prototype warning clk: sparx5: Add Sparx5 SoC DPLL clock driver dt-bindings: clock: sparx5: Add bindings include file clk: qoriq: add LS1021A core pll mux options clk: clk-atlas6: fix return value check in atlas6_clk_init() clk: tegra: pll: Improve PLLM enable-state detection clk: X1000: Add support for calculat REFCLK of USB PHY. clk: JZ4780: Reformat the code to align it. clk: JZ4780: Add functions for enable and disable USB PHY. clk: Ingenic: Add RTC related clocks for Ingenic SoCs. dt-bindings: clock: Add tabs to align code. dt-bindings: clock: Add RTC related clocks for Ingenic SoCs. clk: davinci: Use fallthrough pseudo-keyword clk: imx: Use fallthrough pseudo-keyword clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk clk: qcom: gcc-sdm660: Add missing modem reset ... |
||
|
Linus Torvalds
|
952ace797c |
IOMMU Updates for Linux v5.9
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
|
||
|
Linus Torvalds
|
9420f1ce01 |
This is the bulk of the pin control changes for the v5.9
kernel series:
Core changes:
- The GPIO patch "gpiolib: Introduce
for_each_requested_gpio_in_range() macro" was put in an
immutable branch and merged into the pinctrl tree as well.
We see these changes also here.
- Improved debug output for pins used as GPIO.
New drivers:
- Ocelot Sparx5 SoC driver.
- Intel Emmitsburg SoC subdriver.
- Intel Tiger Lake-H SoC subdriver.
- Qualcomm PM660 SoC subdriver.
- Renesas SH-PFC R8A774E1 subdriver.
Driver improvements:
- Linear improvement and cleanups of the Intel drivers for
Cherryview, Lynxpoint, Baytrail etc. Improved locking among
other things.
- Renesas SH-PFC has added support for RPC pins, groups, and
functions to r8a77970 and r8a77980.
- The newere Freescale (now NXP) i.MX8 pin controllers have
been modularized. This is driven by the Google Android
GKI initiative I think.
- Open drain support for pins on the Qualcomm IPQ4019.
- The Ingenic driver can handle both edges IRQ detection.
- A big slew of documentation fixes all over the place.
- A few irqchip template conversions by yours truly.
-----BEGIN PGP SIGNATURE-----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=mJgb
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of the pin control changes for the v5.9 kernel
series:
Core changes:
- The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range()
macro" was put in an immutable branch and merged into the pinctrl
tree as well. We see these changes also here.
- Improved debug output for pins used as GPIO.
New drivers:
- Ocelot Sparx5 SoC driver.
- Intel Emmitsburg SoC subdriver.
- Intel Tiger Lake-H SoC subdriver.
- Qualcomm PM660 SoC subdriver.
- Renesas SH-PFC R8A774E1 subdriver.
Driver improvements:
- Linear improvement and cleanups of the Intel drivers for
Cherryview, Lynxpoint, Baytrail etc. Improved locking among other
things.
- Renesas SH-PFC has added support for RPC pins, groups, and
functions to r8a77970 and r8a77980.
- The newere Freescale (now NXP) i.MX8 pin controllers have been
modularized. This is driven by the Google Android GKI initiative I
think.
- Open drain support for pins on the Qualcomm IPQ4019.
- The Ingenic driver can handle both edges IRQ detection.
- A big slew of documentation fixes all over the place.
- A few irqchip template conversions by yours truly.
* tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
pinctrl: stmfx: Use irqchip template
pinctrl: amd: Use irqchip template
pinctrl: mediatek: fix build for tristate changes
pinctrl: samsung: Use bank name as irqchip name
pinctrl: core: print gpio in pins debugfs file
pinctrl: mediatek: add mt6779 eint support
pinctrl: mediatek: add pinctrl support for MT6779 SoC
pinctrl: mediatek: avoid virtual gpio trying to set reg
pinctrl: mediatek: update pinmux definitions for mt6779
pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
pinctrl: mcp23s08: Use irqchip template
pinctrl: sx150x: Use irqchip template
dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes
pinctrl: intel: Add Intel Emmitsburg pin controller support
pinctl: ti: iodelay: Replace HTTP links with HTTPS ones
Revert "gpio: omap: handle pin config bias flags"
pinctrl: single: Use fallthrough pseudo-keyword
pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword
pinctrl: baytrail: Use fallthrough pseudo-keyword
...
|
||
|
Linus Torvalds
|
30185b69a2 |
It looks like a smaller batch of clk updates this time around. In the core
framework we just have some minor tweaks and a debugfs feature, so not much to
see there. The driver updates are fairly well split between AT91 and Qualcomm
clk support. Adding those two drivers together equals about 50% of the
diffstat. Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks. See below for some more highlights.
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only consider
clocks that were enabled at boot time
-----BEGIN PGP SIGNATURE-----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=QLRg
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It looks like a smaller batch of clk updates this time around.
In the core framework we just have some minor tweaks and a debugfs
feature, so not much to see there. The driver updates are fairly well
split between AT91 and Qualcomm clk support. Adding those two drivers
together equals about 50% of the diffstat.
Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks.
Highlights:
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only
consider clocks that were enabled at boot time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
ipq806x: gcc: add support for child probe
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
clk: qcom: ipq8074: Add correct index for PCIe clocks
clk: <linux/clk-provider.h>: drop a duplicated word
clk: renesas: cpg-mssr: Add r8a774e1 support
dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
clk: Drop duplicate selection in Kconfig
clk: qcom: smd: Add support for MSM8992/4 rpm clocks
clk: qcom: ipq8074: Add missing clocks for pcie
dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
Replace HTTP links with HTTPS ones: Common CLK framework
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: meson: meson8b: add the vclk2_en gate clock
clk: meson: meson8b: add the vclk_en gate clock
clk: qcom: Fix return value check in apss_ipq6018_probe()
clk: bcm: dvp: Add missing module informations
clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
...
|
||
|
Linus Torvalds
|
75dee3b6de |
- mediatek :
add support for mt6779 gce
shutdown cleanup and address shift support
- qcom :
add msm8994 apcs and sdm660 hmss compatibility
- imx :
mark PM funcs __maybe
- pcc :
put acpi table before bailout
- misc:
replace http with https links
-----BEGIN PGP SIGNATURE-----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=Ntst
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v5.9' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"mediatek:
- add support for mt6779 gce
- shutdown cleanup and address shift support
qcom:
- add msm8994 apcs and sdm660 hmss compatibility
imx:
- mark PM funcs __maybe
pcc:
- put acpi table before bailout
misc:
- replace http with https links"
* tag 'mailbox-v5.9' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: mediatek: cmdq: clear task in channel before shutdown
mailbox: cmdq: support mt6779 gce platform definition
mailbox: cmdq: variablize address shift in platform
dt-binding: gce: add gce header file for mt6779
mailbox: qcom: Add msm8994 apcs compatible
mailbox: qcom: Add sdm660 hmss compatible
mailbox: imx: Mark PM functions as __maybe_unused
mailbox: pcc: Put the PCCT table for error path
mailbox: Replace HTTP links with HTTPS ones
|
||
|
Linus Torvalds
|
c0c419c045 |
Staging/IIO driver patches for 5.9-rc1
Here is the large set of Staging and IIO driver patches for 5.9-rc1. Lots of churn here, but overall the size increase in lines added is small, while adding a load of new IIO drivers. Major things in here: - lots and lots of IIO new drivers and frameworks added - IIO driver fixes and updates - lots of tiny coding style cleanups for staging drivers - vc04_services major reworks and cleanups We had 3 set of drivers move out of staging in this round as well: - wilc1000 wireless driver moved out of staging - speakup moved out of staging - most USB driver moved out of staging Full details are in the shortlog. All of these have been in linux-next with no reported issues. The last few changes here were to resolve reported linux-next issues, and they seem to have resolved the problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXyv2rA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yngIgCfZOVj022X+paV81NwvO/TroMDA7oAn1C4XCmY Fxz55oHIyk9lbQxsDhID =ujqG -----END PGP SIGNATURE----- Merge tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the large set of Staging and IIO driver patches for 5.9-rc1. Lots of churn here, but overall the size increase in lines added is small, while adding a load of new IIO drivers. Major things in here: - lots and lots of IIO new drivers and frameworks added - IIO driver fixes and updates - lots of tiny coding style cleanups for staging drivers - vc04_services major reworks and cleanups We had 3 set of drivers move out of staging in this round as well: - wilc1000 wireless driver moved out of staging - speakup moved out of staging - most USB driver moved out of staging Full details are in the shortlog. All of these have been in linux-next with no reported issues. The last few changes here were to resolve reported linux-next issues, and they seem to have resolved the problems" * tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits) staging: most: fix up movement of USB driver staging: rts5208: clear alignment style issues staging: r8188eu: replace rtw_netdev_priv define with inline function staging: netlogic: clear alignment style issues staging: android: ashmem: Fix lockdep warning for write operation drivers: most: add USB adapter driver staging: most: Use %pM format specifier for MAC addresses staging: ks7010: Use %pM format specifier for MAC addresses staging: qlge: qlge_dbg: removed comment repition staging: wfx: Use flex_array_size() helper in memcpy() staging: rtl8723bs: Align macro definitions staging: rtl8723bs: Clean up function declations staging: rtl8723bs: Fix coding style errors drivers: staging: audio: Fix the missing header file for helper file staging: greybus: audio: Enable GB codec, audio module compilation. staging: greybus: audio: Add helper APIs for dynamic audio modules staging: greybus: audio: Resolve compilation error in topology parser staging: greybus: audio: Resolve compilation errors for GB codec module staging: greybus: audio: Maintain jack list within GB Audio module staging: greybus: audio: Update snd_jack FW usage as per new APIs ... |
||
|
Linus Torvalds
|
3f9df56480 |
sound updates for 5.9
This became wide and scattered updates all over the sound tree as
diffstat shows: lots of (still ongoing) refactoring works in ASoC,
fixes and cleanups caught by static analysis, inclusive term
conversions as well as lots of new drivers. Below are highlights:
ASoC core:
* API cleanups and conversions to the unified mute_stream() call
* Simplify I/O helper functions
* Use helper macros to retrieve RTD from substreams
ASoC drivers:
* Lots of fixes and cleanups in Intel ASoC drivers
* Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S,
Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards,
nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries
boards, TI J721e EVM
ALSA core:
* Minor code refacotring for SG-buffer handling
HD-audio:
* Generalization of mute-LED handling with LED classdev
* Intel silent stream support for HDMI
* Device-specific fixes: CA0132, Loongson-3
Others:
* Usual USB- and HD-audio quirks for various devices
* Fixes for echoaudio DMA position handling
* Various documents and trivial fixes for sparse warnings
* Conversion to adapt inclusive terms
-----BEGIN PGP SIGNATURE-----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=sy7n
-----END PGP SIGNATURE-----
Merge tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This became wide and scattered updates all over the sound tree as
diffstat shows: lots of (still ongoing) refactoring works in ASoC,
fixes and cleanups caught by static analysis, inclusive term
conversions as well as lots of new drivers. Below are highlights:
ASoC core:
- API cleanups and conversions to the unified mute_stream() call
- Simplify I/O helper functions
- Use helper macros to retrieve RTD from substreams
ASoC drivers:
- Lots of fixes and cleanups in Intel ASoC drivers
- Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S,
Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards,
nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries
boards, TI J721e EVM
ALSA core:
- Minor code refacotring for SG-buffer handling
HD-audio:
- Generalization of mute-LED handling with LED classdev
- Intel silent stream support for HDMI
- Device-specific fixes: CA0132, Loongson-3
Others:
- Usual USB- and HD-audio quirks for various devices
- Fixes for echoaudio DMA position handling
- Various documents and trivial fixes for sparse warnings
- Conversion to adopt inclusive terms"
* tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (479 commits)
ALSA: pci: delete repeated words in comments
ALSA: isa: delete repeated words in comments
ALSA: hda/tegra: Add 100us dma stop delay
ALSA: hda: Add dma stop delay variable
ASoC: hda/tegra: Set buffer alignment to 128 bytes
ALSA: seq: oss: Serialize ioctls
ALSA: hda/hdmi: Add quirk to force connectivity
ALSA: usb-audio: add startech usb audio dock name
ALSA: usb-audio: Add support for Lenovo ThinkStation P620
Revert "ALSA: hda: call runtime_allow() for all hda controllers"
ALSA: hda/ca0132 - Fix AE-5 microphone selection commands.
ALSA: hda/ca0132 - Add new quirk ID for Recon3D.
ALSA: hda/ca0132 - Fix ZxR Headphone gain control get value.
ALSA: hda/realtek: Add alc269/alc662 pin-tables for Loongson-3 laptops
ALSA: docs: fix typo
ALSA: doc: use correct config variable name
ASoC: core: Two step component registration
ASoC: core: Simplify snd_soc_component_initialize declaration
ASoC: core: Relocate and expose snd_soc_component_initialize
ASoC: sh: Replace 'select' DMADEVICES 'with depends on'
...
|
||
|
Linus Torvalds
|
8186749621 |
drm next for 5.9-rc1
core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larget cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP - mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJfK1atAAoJEAx081l5xIa+vDkQAJvl/mjbEA7fDy8Ysa0cgPLI 8nI4Bo/MaxkyRfUcP8+f/n3QQrRME37C0xa/Mn6SG1oFAdlovPwDqmDr5kjhkrMI geo8oJb2Q+AsrJr+ejpuF+iq0FxWi64bLbwJFJ2nBet+lHTMzoPceWeq3gG1Vvfl h6PV4B/9TjrnbhcKLIQSEmJ0kZp9uMkDBF/iynVn4+AKAkG1rQNjigdTH48IFPoz 28KuqG0B4NWu648zYXhjsN0kD3Dxjv3YOH+FsoWQpQa9icCTySYbySsQ7l0/XvA3 4BPtP3rWMhU46FHTBkWF72WQR4F0B4wm5DJJKMeG4vb1mXakOqAKcAq7JAbka+wL PBIiU+AcAKRSiwHmYDuDWtDoSpvYncuo0p3IvNP5hhih+7hqCnLIULDWS+V8AUzW 39usS/DXsVKk/HGYIYC89cRwsqWYD4c7edzOBdPQxW4LNYCD2gXezLJ5TeeR2lih y9JIVnPiluWleOovs4W3BoZNRuLc1rHBO6COToXjlme/48Z+sRHBAoge6UZurqRN jr+e60cS7n/DOeJQuNf4UHZnK48Pc24+3kVfMHlX+OKn8VuKPGr+USkeHV/NYL/B USiKCAxkkZM0dxerSb1/Ra9kGnchf0QBpA6Fsem8kV61Z4GVc+K6xJWg7KXB6n/3 7ZyalUKLwlOCz9sYsCCe =Yvtd -----END PGP SIGNATURE----- Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "New xilinx displayport driver, AMD support for two new GPUs (more header files), i915 initial support for RocketLake and some work on their DG1 (discrete chip). The core also grew some lockdep annotations to try and constrain what drivers do with dma-fences, and added some documentation on why the idea of indefinite fences doesn't work. The long list is below. I do have some fixes trees outstanding, but I'll follow up with those later. core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larger cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages" * tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits) drm/msm: use kthread_create_worker instead of kthread_run drm/msm/mdp5: Add MDP5 configuration for SDM636/660 drm/msm/dsi: Add DSI configuration for SDM660 drm/msm/mdp5: Add MDP5 configuration for SDM630 drm/msm/dsi: Add phy configuration for SDM630/636/660 drm/msm/a6xx: add A640/A650 hwcg drm/msm/a6xx: hwcg tables in gpulist drm/msm/dpu: add SM8250 to hw catalog drm/msm/dpu: add SM8150 to hw catalog drm/msm/dpu: intf timing path for displayport drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3 drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845 drm/msm/dpu: move some sspp caps to dpu_caps drm/msm/dpu: update UBWC config for sm8150 and sm8250 drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250 drm/msm/a6xx: set ubwc config for A640 and A650 drm/msm/adreno: un-open-code some packets drm/msm: sync generated headers drm/msm/a6xx: add build_bw_table for A640/A650 drm/msm/a6xx: fix crashstate capture for A650 ... |
||
|
Linus Torvalds
|
e4a7b2dc35 |
LEDs changes for 5.9-rc1.
Okay, so... this one is interesting. RGB LEDs are very common, and we need to have some kind of support for them. Multicolor is for arbitrary set of LEDs in one package, RGB is for LEDs that can produce full range of colors. We do not have real multicolor LED that is not RGB in the pipeline, so that one is disabled for now. You can expect this saga to continue with next pull requests. -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXyskqQAKCRAw5/Bqldv6 8ge0AJ9JRTa/0Xkl7JuKUpC93jAnvjpK+ACgsDijb77H5zmtwC8xa0kXiDsbh3E= =aSJX -----END PGP SIGNATURE----- Merge tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Okay, so... this one is interesting. RGB LEDs are very common, and we need to have some kind of support for them. Multicolor is for arbitrary set of LEDs in one package, RGB is for LEDs that can produce full range of colors. We do not have real multicolor LED that is not RGB in the pipeline, so that one is disabled for now. You can expect this saga to continue with next pull requests" * tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits) MAINTAINERS: Remove myself as LED subsystem maintainer leds: disallow /sys/class/leds/*:multi:* for now leds: add RGB color option, as that is different from multicolor. Make LEDS_LP55XX_COMMON depend on I2C to fix build errors: Documentation: ABI: leds-turris-omnia: document sysfs attribute leds: initial support for Turris Omnia LEDs dt-bindings: leds: add cznic,turris-omnia-leds binding leds: pattern trigger -- check pattern for validity leds: Replace HTTP links with HTTPS ones leds: trigger: add support for LED-private device triggers leds: lp5521: Add multicolor framework multicolor brightness support leds: lp5523: Update the lp5523 code to add multicolor brightness function leds: lp55xx: Add multicolor framework support to lp55xx leds: lp55xx: Convert LED class registration to devm_* dt-bindings: leds: Convert leds-lp55xx to yaml leds: multicolor: Introduce a multicolor class definition leds: Add multicolor ID to the color ID list dt: bindings: Add multicolor class dt bindings documention leds: lp5523: Fix various formatting issues in the code leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros ... |
||
|
Linus Torvalds
|
441977979a |
Devicetree updates for v5.9:
- Improve device links cycle detection and breaking. Add more bindings for device link dependencies. - Refactor parsing 'no-map' in __reserved_mem_alloc_size() - Improve DT unittest 'ranges' and 'dma-ranges' test case to check differing cell sizes - Various http to https link conversions - Add a schema check to prevent 'syscon' from being used by itself without a more specific compatible - A bunch more DT binding conversions to schema -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl8pjPoQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw33aD/48a9wymbzf0r6mpXJyzO5zspcvcDgT7/si Eeucbp7diRX3Ei0YkfvQH3s7bEA7JM2DlPDmXBieWZqpXS9tvbX9P6VxId6bfTiI oSg/e4NNqxtHpaf4Nn6EwFFILbbi10LKvwodYDy9agePApc+wJWLI2WwlvdEsSsF vv9nnF23NdJnSjsEXwiAB+ouX8EilqB80+s9W/TUaA/RS+xEOinAkXab4qjCvTlH yUHpqe/mXDd6c4gb0EsIuAPkG7GE9/pc39iwxQ7IWz/qnSSfExjEac8j0QU4zD8u zD2EkIQMEZR7IDsQOOkEQ4gbbzl3SjrMlQSZp/VWcjcn9uVrE5VPddH/NMdb8L7m m5pgH1TFheYBPaqRIVuzrRcfW7KVjjeUuoG7xfDQy+ELWmHAMlb3uyH2CNDqmgYM ESEQgSH5w4cabP5qeXvXyZci3Zbajw2Dd555gWNC2ot6yPToJEXkesnrcpuwZZV5 Wyn5IOAuf7rri4TEpl5CsR6iJnAJsNnN+23gMaemxz2qDgBCBhY7CSoRVeP7Xxpw ymCIna6p7i/ufiP4QauTTafw03AMZz6Le8iujIaN3dmq8SbQc7BYeFNwFNjs+lyO B1gvJOt3xTXTdfqqQWpEQMg659IGguOu6MGecxN+nteTBYqQ3Ol77zNn+a0n4BA7 +rGqybfiFg== =6f3o -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Improve device links cycle detection and breaking. Add more bindings for device link dependencies. - Refactor parsing 'no-map' in __reserved_mem_alloc_size() - Improve DT unittest 'ranges' and 'dma-ranges' test case to check differing cell sizes - Various http to https link conversions - Add a schema check to prevent 'syscon' from being used by itself without a more specific compatible - A bunch more DT binding conversions to schema * tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) of: reserved-memory: remove duplicated call to of_get_flat_dt_prop() for no-map node of: unittest: Use bigger address cells to catch parser regressions dt-bindings: memory-controllers: Convert mmdc to json-schema dt-bindings: mtd: Convert imx nand to json-schema dt-bindings: mtd: Convert gpmi nand to json-schema dt-bindings: iio: io-channel-mux: Fix compatible string in example code of: property: Add device link support for pinctrl-0 through pinctrl-8 of: property: Add device link support for multiple DT bindings dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema dt-bindings: mux: mux.h: drop a duplicated word dt-bindings: misc: Convert olpc,xo1.75-ec to json-schema dt-bindings: aspeed-lpc: Replace HTTP links with HTTPS ones dt-bindings: drm/bridge: Replace HTTP links with HTTPS ones drm/tilcdc: Replace HTTP links with HTTPS ones dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support dt-bindings: fpga: Replace HTTP links with HTTPS ones dt-bindings: virtio: Replace HTTP links with HTTPS ones dt-bindings: media: imx274: Add optional input clock and supplies dt-bindings: i2c-gpio: Use 'deprecated' keyword on deprecated properties dt-bindings: interrupt-controller: Fix typos in loongson,liointc.yaml ... |
||
|
Linus Torvalds
|
1785d11612 |
Char/Misc driver patches for 5.9-rc1
Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn Vjf4rKM73GC11bVF4Gyy =Xq1R -----END PGP SIGNATURE----- Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ... |
||
|
Linus Torvalds
|
442489c219 |
Time, timers and related driver updates:
- Prevent unnecessary timer softirq invocations by extending the tracking
of the next expiring timer in the timer wheel beyond the existing NOHZ
functionality. The tracking overhead at enqueue time is within the
noise, but on sensitive workloads the avoidance of the soft interrupt
invocation is a measurable improvement.
- The obligatory new clocksource driver for Ingenic X100 OST
- The usual fixes, improvements, cleanups and extensions for newer chip
variants all over the driver space.
-----BEGIN PGP SIGNATURE-----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=uJnp
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timers and related driver updates:
- Prevent unnecessary timer softirq invocations by extending the
tracking of the next expiring timer in the timer wheel beyond the
existing NOHZ functionality.
The tracking overhead at enqueue time is within the noise, but on
sensitive workloads the avoidance of the soft interrupt invocation
is a measurable improvement.
- The obligatory new clocksource driver for Ingenic X100 OST
- The usual fixes, improvements, cleanups and extensions for newer
chip variants all over the driver space"
* tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
timers: Recalculate next timer interrupt only when necessary
clocksource/drivers/ingenic: Add support for the Ingenic X1000 OST.
dt-bindings: timer: Add Ingenic X1000 OST bindings.
clocksource/drivers: Replace HTTP links with HTTPS ones
clocksource/drivers/nomadik-mtu: Handle 32kHz clock
clocksource/drivers/sh_cmt: Use "kHz" for kilohertz
clocksource/drivers/imx: Add support for i.MX TPM driver with ARM64
clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT.
timers: Lower base clock forwarding threshold
timers: Remove must_forward_clk
timers: Spare timer softirq until next expiry
timers: Expand clk forward logic beyond nohz
timers: Reuse next expiry cache after nohz exit
timers: Always keep track of next expiry
timers: Optimize _next_timer_interrupt() level iteration
timers: Add comments about calc_index() ceiling work
timers: Move trigger_dyntick_cpu() to enqueue_timer()
timers: Use only bucket expiry for base->next_expiry value
timers: Preserve higher bits of expiration on index calculation
clocksource/drivers/timer-atmel-tcb: Add sama5d2 support
...
|
||
|
Dennis YC Hsieh
|
6cb4f3b055 |
dt-binding: gce: add gce header file for mt6779
Add documentation for the mt6779 gce. Add gce header file defined the gce hardware event, subsys number and constant for mt6779. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
|
Linus Torvalds
|
bbb839901f |
regulator: Updates for v5.9
This time around the bulk of the work on the regulator API has been
cleanups of various kinds, partly but not entirely inspired by the W=1
stuff that 0day turned on. There's also been a fairly large crop of new
drivers, and a few bugfixes for existing drivers.
- Mode setting support for MT6397 and DA9211.
- New drivers for ChromeOS embedded controllers, Fairchild FAN53880,
NXP PCA9450, Qualcomm LABIBB, MP5496, and VBUS booster, and Silergy
SY8827N
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl8n+tcTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0AbDB/9d9/CX9OK0qy4qMew7t/+bmHNKWB4O
jlVSp6Raj9dF3siLCaWT70jKrCEKBUIMSiA6c6UqWGHPbHLvvsTuu1aau2APIi/w
PDrnAfcku7J6CJMl4wwkn1Sh8vobXtqeZbT0Ydfx7QRzI+AMqz7CWLrOh9ET3Z3S
lN85GT7lqiG1hD+frep1FzpZDorzZa4Xvml7/7ns51IRn9NezdjRFBTG1dsZuKy6
GPEFXgLCfhaYs7zY1Tk9l5sMAdG/1OU/OvT4w4xmo7PkEZGYAHLSJfHQdRu2LwZU
r9YSVJ+COOfqaoml08XbFx1U12zWHgln+5ty+EuLxNNl4taBPpLqZDBC
=JJHu
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This time around the bulk of the work on the regulator API has been
cleanups of various kinds, partly but not entirely inspired by the W=1
stuff that 0day turned on.
There's also been a fairly large crop of new drivers, and a few
bugfixes for existing drivers.
- Mode setting support for MT6397 and DA9211.
- New drivers for ChromeOS embedded controllers, Fairchild FAN53880,
NXP PCA9450, Qualcomm LABIBB, MP5496, and VBUS booster, and Silergy
SY8827N"
* tag 'regulator-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (67 commits)
regulator: add the sub node names for the MP5496 PMIC
regulator: cros-ec-regulator: Fix double free of desc->name.
platform/chrome: cros_ec: Fix host command for regulator control.
regulator: pca9450: Convert to use module_i2c_driver
regulator: fix memory leak on error path of regulator_register()
regulator: Replace HTTP links with HTTPS ones
regulator: convert QCOM SMD-RPM regulator document to YAML schema
regulator: gpio: Honor regulator-boot-on property
regulator: core: Add destroy_regulator()
regulator: Correct kernel-doc inconsistency
regulator: Add labibb regulator binding
regulator: qcom: Add labibb driver
regulator: Allow regulators to verify enabled during enable()
regulator: cros-ec: Constify cros_ec_regulator_voltage_ops
regulator: devres: Standardise on function documentation headers
regulator: of_regulator: Add missing colon for rdev kerneldoc argument
regulator: devres: Fix issues with kerneldoc headers
regulator: fan53880: Add support for COMPILE_TEST
regulator: fan53880: Add missing .owner field in regulator_desc
dt-bindings: regulator: add pca9450 regulator yaml
...
|
||
|
Linus Torvalds
|
d4db4e5532 |
ARM: new SoC support for v5.9
There are three SoC families newly dded to the 32-bit and
64-bit Arm architecture code in the kernel this time:
- Daniel Palmer adds initial support for two chips made by MStar, a
taiwanese SoC manufacturer that became part of Mediatek in 2012. For
now, the added support is fairly minimal, with just two of its
Cortex-A7 based 32-bit camera chips getting support for a limited
set of on-chip peripherals.
- Lars Povlsen from Microchip adds support for their new Sparx5
family of ethernet switch chips using 64-bit Cortex-A53 cores.
These are descended from earlier VSC7xxx SparX and Ocelot chips
using 32-bit MIPS cores.
- Daniele Alessandrelli from Intel adds support for the new Keem Bay
SoC for computer vision, built around a Movidius VPU with Linux
running on Arm Cortex-A53 cores.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Yy3D
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new ARM SoC support from Arnd Bergmann:
"There are three SoC families newly dded to the 32-bit and 64-bit Arm
architecture code in the kernel this time:
- Daniel Palmer adds initial support for two chips made by MStar, a
taiwanese SoC manufacturer that became part of Mediatek in 2012.
For now, the added support is fairly minimal, with just two of its
Cortex-A7 based 32-bit camera chips getting support for a limited
set of on-chip peripherals.
- Lars Povlsen from Microchip adds support for their new Sparx5
family of ethernet switch chips using 64-bit Cortex-A53 cores.
These are descended from earlier VSC7xxx SparX and Ocelot chips
using 32-bit MIPS cores.
- Daniele Alessandrelli from Intel adds support for the new Keem Bay
SoC for computer vision, built around a Movidius VPU with Linux
running on Arm Cortex-A53 cores"
* tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: mstar: Correct the compatible string for pmsleep
dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep
dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep
ARM: mstar: Add reboot support
ARM: mstar: Add "pmsleep" node to base dtsi
ARM: mstar: Add PMU
ARM: mstar: Adjust IMI size for infinity3
ARM: mstar: Adjust IMI size for mercury5
ARM: mstar: Adjust IMI size of infinity
ARM: mstar: Add IMI SRAM region
dt-bindings: arm: mstar: Move existing MStar binding descriptions
dt-bindings: arm: mstar: Add binding details for mstar, pmsleep
ARM: mstar: Fix dts filename for 70mai midrive d08
ARM: mstar: Add dts for 70mai midrive d08
ARM: mstar: Add dts for msc313(e) based BreadBee boards
ARM: mstar: Add mercury5 series dtsis
ARM: mstar: Add infinity/infinity3 family dtsis
ARM: mstar: Add Armv7 base dtsi
ARM: mstar: Add binding details for mstar,l3bridge
ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs
...
|
||
|
Linus Torvalds
|
822ef14e9d |
ARM: SoC driver updates for v5.9
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
|
||
|
Stephen Boyd
|
dd9c697a94 |
Merge branches 'clk-microchip', 'clk-mmp', 'clk-unused' and 'clk-at91' into clk-next
- Add support for SAMA7G5 SoC clks - Microchip Sparx5 DPLL clk * clk-microchip: clk: sparx5: Add Sparx5 SoC DPLL clock driver dt-bindings: clock: sparx5: Add bindings include file * clk-mmp: clk: mmp: avoid missing prototype warning * clk-unused: clk: drop unused function __clk_get_flags * clk-at91: clk: at91: sama7g5: add clock support for sama7g5 clk: at91: clk-utmi: add utmi support for sama7g5 clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs clk: at91: add macro for pll ids mask clk: at91: clk-programmable: add mux_table option clk: at91: clk-peripheral: add support for changeable parent rate clk: at91: clk-master: add master clock support for SAMA7G5 clk: at91: clk-generated: add mux_table option clk: at91: clk-generated: pass the id of changeable parent at registration clk: at91: replace conditional operator with double logical not clk: at91: sckc: register slow_rc with accuracy option clk: at91: sam9x60: fix main rc oscillator frequency clk: at91: sam9x60-pll: use frac when setting frequency clk: at91: sam9x60-pll: check fcore against ranges clk: at91: sam9x60-pll: use logical or for range check clk: at91: clk-sam9x60-pll: fix mul mask clk: at91: clk-generated: check best_rate against ranges clk: at91: clk-generated: continue if __clk_determine_rate() returns error clk: at91: fix possible dead lock in new drivers |
||
|
Stephen Boyd
|
1a91e318c0 |
Merge branches 'clk-fallthru', 'clk-ingenic', 'clk-tegra', 'clk-sirf' and 'clk-qoriq' into clk-next
- Add RTC related clks on Ingenic SoCs - Support USB PHY clks on Ingenic SoCs * clk-fallthru: clk: davinci: Use fallthrough pseudo-keyword clk: imx: Use fallthrough pseudo-keyword * clk-ingenic: clk: X1000: Add support for calculat REFCLK of USB PHY. clk: JZ4780: Reformat the code to align it. clk: JZ4780: Add functions for enable and disable USB PHY. clk: Ingenic: Add RTC related clocks for Ingenic SoCs. dt-bindings: clock: Add tabs to align code. dt-bindings: clock: Add RTC related clocks for Ingenic SoCs. * clk-tegra: clk: tegra: pll: Improve PLLM enable-state detection * clk-sirf: clk: clk-atlas6: fix return value check in atlas6_clk_init() * clk-qoriq: clk: qoriq: add LS1021A core pll mux options |
||
|
Stephen Boyd
|
53e07424ec |
Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and 'clk-debugfs' into clk-next
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs * clk-actions: MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs clk: actions: Add Actions S500 SoC Reset Management Unit support dt-bindings: reset: Add binding constants for Actions S500 RMU clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC clk: actions: Fix h_clk for Actions S500 SoC * clk-rockchip: clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328" clk: rockchip: use separate compatibles for rk3288w-cru dt-bindings: clocks: add rk3288w variant compatible clk: rockchip: Handle clock tree for rk3288w variant clk: rockchip: convert rk3036 pll type to use internal lock status clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout * clk-iproc: clk: iproc: round clock rate to the closest * clk-intel: clk: intel: Avoid unnecessary memset by improving code clk: intel: Improve locking in the driver clk: intel: Use devm_clk_hw_register() instead of clk_hw_register() * clk-debugfs: clk: Add support for enabling/disabling clocks from debugfs |
||
|
Stephen Boyd
|
987106e5f2 |
Merge branches 'clk-https', 'clk-renesas', 'clk-kconfig', 'clk-amlogic' and 'clk-imx' into clk-next
* clk-https: Replace HTTP links with HTTPS ones: Common CLK framework * clk-renesas: clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: renesas: Add r8a774e1 CPG Core Clock Definitions dt-bindings: power: Add r8a774e1 SYSC power domain definitions clk: renesas: rzg2: Mark RWDT clocks as critical clk: renesas: rcar-gen3: Mark RWDT clocks as critical clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot dt-bindings: clock: renesas: cpg: Convert to json-schema * clk-kconfig: clk: hsdk: Fix bad dependency on IOMEM clk: Specify IOMEM dependency for HSDK pll driver clk: Drop duplicate selection in Kconfig clk: AST2600: Add mux for EMMC clock clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER * clk-amlogic: clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 clk: meson: g12a: Add support for NNA CLK source clocks dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs * clk-imx: clk: imx: vf610: add CAAM clock clk: imx8mp: add mu root clk |
||
|
Stephen Boyd
|
c63e2a7af3 |
Merge branches 'clk-socfpga', 'clk-doc', 'clk-qcom', 'clk-vc5' and 'clk-bcm' into clk-next
- Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Make defines for bcm63xx-gate clks to use in DT - Support gate clks on BCM6318 SoCs - Add HDMI clks for BCM2711 SoCs - Support BCM2711 SoC firmware clks * clk-socfpga: clk: socfpga: agilex: mpu_l2ram_clk should be mpu_ccu_clk clk: socfpga: agilex: add nand_x_clk and nand_ecc_clk dt-bindings: agilex: add NAND_X_CLK and NAND_ECC_CLK * clk-doc: clk: Clean up kernel-doc errors clk: <linux/clk-provider.h>: drop a duplicated word clk: add function documentation for clk_hw_round_rate() * clk-qcom: (38 commits) dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk clk: qcom: gcc-sdm660: Add missing modem reset clk: qcom: lpass: Add support for LPASS clock controller for SC7180 clk: qcom: gcc: Add support for GCC LPASS clock for SC7180 dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180 clk: qcom: gdsc: Add support to enable retention of GSDCR clk: qcom: Export gdsc_gx_do_nothing_enable() to modules clk: qcom: Add graphics clock controller driver for SM8250 clk: qcom: Add graphics clock controller driver for SM8150 clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers dt-bindings: clock: add SM8250 QCOM Graphics clock bindings dt-bindings: clock: add SM8150 QCOM Graphics clock bindings dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpucc clk: qcom: gcc: remove unnecessary vco_table from SM8150 clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL clk: qcom: gcc: fix sm8150 GPU and NPU clocks dt-bindings: clock: Fix qcom,msm8996-apcc yaml syntax ... * clk-vc5: clk: vc5: use a dedicated struct to describe the output drivers dt-bindings: clk: versaclock5: convert to yaml MAINTAINERS: take over IDT VersaClock 5 clock driver dt-bindings: clk: versaclock5: fix 'idt' prefix typos clk: vc5: Add memory check to prevent oops clk: vc5: fix use of memory after it has been kfree'd clk: vc5: Enable addition output configurations of the Versaclock dt: Add additional option bindings for IDT VersaClock clk: vc5: Allow Versaclock driver to support multiple instances * clk-bcm: (44 commits) clk: bcm2835: Do not use prediv with bcm2711's PLLs dt-bindings: arm: bcm: Add a select to the RPI Firmware binding clk: bcm: dvp: Add missing module informations clk: bcm: rpi: Remove the quirks for the CPU clock clk: bcm2835: Don't cache the PLLB rate clk: bcm2835: Allow custom CCF flags for the PLLs Revert "clk: bcm2835: remove pllb" clk: bcm: rpi: Give firmware clocks a name clk: bcm: rpi: Discover the firmware clocks clk: bcm: rpi: Add an enum for the firmware clocks clk: bcm: rpi: Add DT provider for the clocks clk: bcm: rpi: Make the PLLB registration function return a clk_hw clk: bcm: rpi: Split pllb clock hooks clk: bcm: rpi: Rename is_prepared function clk: bcm: rpi: Pass the clocks data to the firmware function clk: bcm: rpi: Add clock id to data clk: bcm: rpi: Create a data structure for the clocks clk: bcm: rpi: Use CCF boundaries instead of rolling our own clk: bcm: rpi: Make sure the clkdev lookup is removed clk: bcm: rpi: Switch to clk_hw_register_clkdev ... |
||
|
Pavel Machek
|
54212f5a1b |
leds: add RGB color option, as that is different from multicolor.
Multicolor is a bit too abstract. Yes, we can have Green-Magenta-Ultraviolet LED, but so far all the LEDs we support are RGB, and not even RGB-White or RGB-Yellow variants emerged. Multicolor is not a good fit for RGB LED. It does not really know about LED color. In particular, there's no way to make LED "white". Userspace is interested in knowing "this LED can produce arbitrary color", which not all multicolor LEDs can. Signed-off-by: Pavel Machek <pavel@ucw.cz> |
||
|
Arnd Bergmann
|
f510ca0527 |
Qualcomm ARM64 DT additional updates for 5.9
For SC7180 this adds the necessary properties for blowing fuses in qfprom, Coresight fixes, GPU interconnect votes and specifies max speed for USB controller. SM8150 and SM8250 gains Adreno SMMU, the graphics management unit and the GPU nodes, to enable headless GPU usage. SDM845 gains tracing support for deep idle, GPU bus bandwidth scaling and DB845c gains the LT9611 HDMI bridge wired up. MSM8994 gains SMD RPM and SCM support and a new dts for the Sony Xperia Z5. MSM8992 is refactored and modernized and gets support for SCM, SPMI, BLSP2 UART and I2C nodes, PMU, RPM clock controller, PSCI and proper CPU definitions. Support for the Xiaomi Libra and Microsoft Lumia 950 are added. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl8iVQQbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F9l4P/jc98ZkQXQXKQJ/ZBo/Q bCXRVd+9BuQrfQLLtBEsoCHAh+XaapbhhKG95nWm8wYY4EWnmArR2XBjtC7Omy3b 9x3M6v3cuHcmaqEx8rHr8OOtJIi440roz3mpl1sZZFOo/XXmuUYIc/J/9/4oAd/J k4X9ISaSrOzIre99LhRRlfzGeUi02vRHKJ8Qu+qjhtp8qCyctyXw0pZuE+koyWTX kkri5fzu87/OXp8aJmhevOTn3CXWCNMqDoPthU5Pm1b2GVNiIZUSFztMNIu1h8U4 RZblerVyBB1opOtaA+e1hINrNY7dTM1AUsUc+ocCUehjDscibDqKJHIzoZP/SxED ZH+3tszHQbv1KQANOTqjW2l0h8eEjFaL8kSf3u3ze7gjzJpUYO3E/xGMhWIZUP/m nv7gnCc4VB0dhw19R0Nq/LV6zeQalXeuPyzaNoytskW/Gr2A7EdICr1W3fO1JCd7 5/6B8Tj+uGDd9AAXAghCQF2WvW98BQ9/2BM9dpLDHpuETY5Z2JSSZbf5gHNKcgQ9 Mu7CH6geeJsi+PvMDlN+4u9ipIg56ldL7phS+gE6USls4bLO/AJYjunvVA27wPs9 nhdo9B51upePixBUY5aHD9+crf36SmjchuIaoHgEF3kdjF8UwOoS5mU5FIi/u5lx U528G9RM9PChVVsfdNCgffhj =FfiE -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT additional updates for 5.9 For SC7180 this adds the necessary properties for blowing fuses in qfprom, Coresight fixes, GPU interconnect votes and specifies max speed for USB controller. SM8150 and SM8250 gains Adreno SMMU, the graphics management unit and the GPU nodes, to enable headless GPU usage. SDM845 gains tracing support for deep idle, GPU bus bandwidth scaling and DB845c gains the LT9611 HDMI bridge wired up. MSM8994 gains SMD RPM and SCM support and a new dts for the Sony Xperia Z5. MSM8992 is refactored and modernized and gets support for SCM, SPMI, BLSP2 UART and I2C nodes, PMU, RPM clock controller, PSCI and proper CPU definitions. Support for the Xiaomi Libra and Microsoft Lumia 950 are added. * tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits) arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree arm64: dts: qcom: msm8992: Add RPMCC node arm64: dts: qcom: msm8992: Add PSCI support. arm64: dts: qcom: msm8992: Add PMU node arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device arm64: dts: qcom: msm8992: Add a SCM node arm64: dts: qcom: msm8992: Add a proper CPU map arm64: dts: qcom: bullhead: Move UART pinctrl to SoC arm64: dts: qcom: bullhead: Add qcom,msm-id arm64: dts: qcom: msm8992: Fix SDHCI1 arm64: dts: qcom: msm8992: Modernize the DTS style arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead. arm64: dts: qcom: msm8994: Add support for SMD RPM arm64: dts: qcom: msm8992: Add a label to rpm-requests arm64: dts: qcom: msm8994: Add SCM node arm64: dts: qcom: sdm845-db845c: Add hdmi bridge nodes arm64: dts: qcom: add sm8250 GPU nodes ... Link: https://lore.kernel.org/r/20200730052003.649940-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Lars Povlsen
|
4299f85a67 |
dt-bindings: clock: sparx5: Add bindings include file
The Sparx5 support 9 different clock outputs. This include file has defines for each supported clock ordinal. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200727084211.6632-8-lars.povlsen@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Jonathan Marek
|
87b517a804 |
dt-bindings: power: Add missing rpmpd rpmh regulator level
Add RPMH_REGULATOR_LEVEL_SVS_L0, used by sm8250. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200709135251.643-13-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> |
||
|
周琰杰 (Zhou Yanjie)
|
acb3b78de3 |
dt-bindings: clock: Add tabs to align code.
The "JZ4780_CLK_LCD0PIXCLK" and the "JZ4780_CLK_LCD1PIXCLK" in the "jz4780.h" and the new added "JZ4780_CLK_EXCLK_DIV512" in the previous patch is too long, add tabs to other lines to align them. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20200725051136.58220-3-zhouyanjie@wanyeetech.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
周琰杰 (Zhou Yanjie)
|
316810e883 |
dt-bindings: clock: Add RTC related clocks for Ingenic SoCs.
Add RTC related clocks bindings for the JZ4780 SoC, the X1000 SoC, and the X1830 SoC from Ingenic. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20200725051136.58220-2-zhouyanjie@wanyeetech.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Konrad Dybcio
|
b538304da7 |
clk: qcom: gcc-sdm660: Add missing modem reset
This will be required in order to support the
modem upstream.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200726111215.22361-2-konradybcio@gmail.com
Fixes:
|
||
|
Stephan Gerhold
|
34facb0422
|
ASoC: dt-bindings: q6asm: Add Q6ASM_DAI_{TX_RX, TX, RX} defines
Right now the direction of a DAI has to be specified as a literal
number in the device tree, e.g.:
dai@0 {
reg = <0>;
direction = <2>;
};
but this does not make it immediately clear that this is a
playback/RX-only DAI.
Actually, q6asm-dai.c has useful defines for this. Move them to the
dt-bindings header to allow using them in the dts(i) files.
The example above then becomes:
dai@0 {
reg = <0>;
direction = <Q6ASM_DAI_RX>;
};
which is immediately recognizable as playback/RX-only DAI.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200727082502.2341-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
||
|
Taniya Das
|
381cc6f97c |
dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic properties that are needed in a device tree. Also add clock ids for GCC LPASS and LPASS Core clock IDs for LPASS client to request for the clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1595606878-2664-3-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Arnd Bergmann
|
cf8182fc9d |
Texas Instruments K3 SoC DT updates for v5.9
- Add platforms chipid nodes for am65x and j721e - Update latest data sheet values for MMC on am65x - Add serdes and usb3 support for j721e - Add analog audio support for j721e - Add SD card support for am65x - Rename DT nodes for gic-its/smmu to their standard counterparts am65x/j721e - HTTP links replaced with HTTPS ones -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEtQ6szHmfiBT7fujkyvq9MXlQGhEFAl8aj4cQHHQta3Jpc3Rv QHRpLmNvbQAKCRDK+r0xeVAaEfxHD/4kE90nx+EyiSGQ5ZCNfoXs/0JB95KAGGcv 23PGvjYBfD/GFGvbL+4F7GTptqEJrkJXMcfCIR2Nv5fjhA+OjjPMzj73octytasN iRc+ESXLgD07bLdTWEvGvMqBaslfLOajs2PSu7LOMGK6NihRiqCGR5urk6e8h0Jt gY4gb1EFN01VIYB7n3xy7CgpHx/G6g0VJ1TjpEZVyM5G3K50/qrKzJmxX9MIiVBm o9E85dveFe3yxvI6BepwQpfrrVg5j6xlJCHrQ0xepPiKAjCzlTaxOdTm2omGemES h7DQ2CAD23SJ+SnF4bCltoNw/1GOfw1CoslB9X4FdvSBknp61VjrfeGp9PKZHxFI EvEV1tmpAFAhxSlY4zcyhmpMcBiKzGojGExK0COt5hHm7ssbTIaDKNTTJByzI1cJ FkHr609ktYmSyfg9JVejiCPa9D/8etYqkgy/9edM4iYLss4TkPGHHD+C0iqMQaCA mcOsquOaTnbiATQuqAaoLzZbUKSO4R57DgXAO7+XzOgaQutBRJ5VMgREM8apNYUa baE779XQfCMiOpgEpEpwQMVVgt6S/PUXis6yZy2BpP3npbKVKI53f0wpZc0FvM8e 9J5cpWBLX1qK0lO8KinGRfW09+EcSlbWe2Byh1EKfqogRsfJlsPYyAuEg3BwDr1o XMQS/p1aPQ== =0bPs -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC DT updates for v5.9 - Add platforms chipid nodes for am65x and j721e - Update latest data sheet values for MMC on am65x - Add serdes and usb3 support for j721e - Add analog audio support for j721e - Add SD card support for am65x - Rename DT nodes for gic-its/smmu to their standard counterparts am65x/j721e - HTTP links replaced with HTTPS ones * tag 'ti-k3-dt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller arm64: dts: ti: k3-am65/j721e-main: rename gic-its node to msi-controller arm64: dts: ti: k3-j721e-main: rename smmu node to iommu arm64: dts: ti: k3-*: Replace HTTP links with HTTPS ones arm64: dts: ti: k3-am654-base-board: Add support for SD card arm64: dts: ti: k3-am65-main: Add support for sdhci1 arm64: dts: ti: j721e-common-proc-board: Analog audio support arm64: dts: ti: k3-j721e-common-proc-board: Remove duplicated main_i2c1_exp4_pins_default arm64: dts: ti: k3-am654-main: Update otap-del-sel values arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module node arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node Link: https://lore.kernel.org/r/3b3b9214-769d-ba1b-db5e-44414a8c5756@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Jonathan Marek
|
324e0bfcfb |
dt-bindings: clock: add SM8250 QCOM Graphics clock bindings
Add device tree bindings for graphics clock controller for Qualcomm Technology Inc's SM8250 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-9-jonathan@marek.ca Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Jonathan Marek
|
f793e45494 |
dt-bindings: clock: add SM8150 QCOM Graphics clock bindings
Add device tree bindings for graphics clock controller for Qualcomm Technology Inc's SM8150 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-8-jonathan@marek.ca Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Randy Dunlap
|
80d7f913de |
dt-bindings: mux: mux.h: drop a duplicated word
Drop the repeated word "the" in a comment. Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200719002816.20263-1-rdunlap@infradead.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Thomas Gleixner
|
1b7efaa615 |
- Add sama5d2 support and rework the 32kHz clock handling (Alexandre Belloni)
- Add the high resolution support for SMP/SMT on the Ingenic timer (Zhou Yanjie) - Add support for i.MX TPM driver with ARM64 (Anson Huang) - Fix typo by replacing KHz to kHz (Geert Uytterhoeven) - Add 32kHz support by setting the minimum ticks to 5 on Nomadik MTU (Linus Walleij) - Replace HTTP links with HTTPS ones for security reasons (Alexander A. Klimov) - Add support for the Ingenic X1000 OST (Zhou Yanjie) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl8ZqeUACgkQqDIjiipP 6E9tawf/UGUhEfB+VmH9w60NJlM0fC5a/TjVOb4yMjTZjjdyd4zMBHemF+dqMNnw wTr+S8U9QfvP4BDgg1hWV+vhAwxz2xkhR0cGtOQjck5322vZglGSmAVqTCAlQMoZ LNm98XeUYYVNMB+/+BHkf8F/nHV9vRo8sJg7UnvX/6RCykXFYXVP+P8LfkAU1MPt 8vaRPCcyGnYXrgjDYY5M5qYudLNpFPrzr1yJDWdwWUliwH3T1X1FNogTdUo955qk wM+Hb4yPRuRufM+yATPsRedQypZFpoWFObuEMD2FaIw/LZVxV7D1tmw5KhL2V1tZ XSzNiJDEgri/4LaVzXKP7sVlQlZfDQ== =DXTp -----END PGP SIGNATURE----- Merge tag 'timers-v5.9' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clock event/surce driver changes from Daniel Lezcano: - Add sama5d2 support and rework the 32kHz clock handling (Alexandre Belloni) - Add the high resolution support for SMP/SMT on the Ingenic timer (Zhou Yanjie) - Add support for i.MX TPM driver with ARM64 (Anson Huang) - Fix typo by replacing KHz to kHz (Geert Uytterhoeven) - Add 32kHz support by setting the minimum ticks to 5 on Nomadik MTU (Linus Walleij) - Replace HTTP links with HTTPS ones for security reasons (Alexander A. Klimov) - Add support for the Ingenic X1000 OST (Zhou Yanjie) |
||
|
周琰杰 (Zhou Yanjie)
|
ac756d05c4 |
dt-bindings: timer: Add Ingenic X1000 OST bindings.
Add the OST bindings for the X1000 SoC from Ingenic. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200722171804.97559-2-zhouyanjie@wanyeetech.com |
||
|
Hanks Chen
|
b07b616214 |
pinctrl: mediatek: update pinmux definitions for mt6779
Add devicetree bindings for Mediatek mt6779 SoC Pin Controller. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Andy Teng <andy.teng@mediatek.com> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/1595503197-15246-2-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Arnd Bergmann
|
9e586c8431 |
Reset controller updates for v5.9
This tag moves the reset-simple header out of drivers/reset for use by drivers outside of drivers/reset, adds a .reset() callback to reset-simple, converts i.MX reset bindings to json-schema, fixes a compile warning in the reset-intel-gw driver, and replaces some HTTP links with HTTPS ones in comments. -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXxWSARcccC56YWJlbEBw ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwAP6AP4ld+W8CqwjEw+tkTVoCcGpE3v4 rmeEao1MtXtttiG9bAEAl2y794/zu0cXI0UEYqbhuqDYG/z8uXoBRvTGEP7UqQc= =tScp -----END PGP SIGNATURE----- Merge tag 'reset-for-v5.9' of git://git.pengutronix.de/pza/linux into arm/drivers Reset controller updates for v5.9 This tag moves the reset-simple header out of drivers/reset for use by drivers outside of drivers/reset, adds a .reset() callback to reset-simple, converts i.MX reset bindings to json-schema, fixes a compile warning in the reset-intel-gw driver, and replaces some HTTP links with HTTPS ones in comments. * tag 'reset-for-v5.9' of git://git.pengutronix.de/pza/linux: reset: Replace HTTP links with HTTPS ones reset: intel: fix a compile warning about REG_OFFSET redefined dt-bindings: reset: Convert i.MX7 reset to json-schema dt-bindings: reset: Convert i.MX reset to json-schema reset: simple: Add reset callback reset: Move reset-simple header out of drivers/reset Link: https://lore.kernel.org/r/b718f052e38abbaac599d80645376b75e54aa5bd.camel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Lars Povlsen
|
39c8378a1c |
dt-bindings: clock: sparx5: Add bindings include file
The Sparx5 support 9 different clock outputs. This include file has defines for each supported clock ordinal. Link: https://lore.kernel.org/r/20200615133242.24911-8-lars.povlsen@microchip.com Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d27895a122 |
i.MX device tree update for 5.9:
- New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC. - Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings. - Make tempmon node as child of anatop node according to hardware architecture. - The vf610-zii device update: configure fiber port to 1000BaseX, add switch watchdog, MDIO speed and preamble. - A series from Fabio Estevam to update imx6qdl-sabresd and imx6q-tbs2910 for using MDIO node and reset-assert-us. - Align L2 cache-controller device node name with .yaml schema. - Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board. - A series of patches from Shengjiu Wang to enable various audio support on i.MX6 devices. - Add Gateworks System Controller support for imx6qdl-gw devices. - Change default #pwm-cells setting to <3> in the SoC dtsi files. - Other small random changes. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VVgcUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM7azwf+KzAukegArKtAmsbAnYNKYztXXifW 6Hc3+hv2mfUtsGfHPSUJJ5MhEW52xAbcXnYETUkmoWe1W1zIxrNNWvBUm4nPF5os 0cO8tjk4cE4CYDnsl8sBSqT55sd3ke61I+j9q0NAQNyX9OlmZ3kfm8yw0yIsxTKp /FzoLmOeRzhVKHdZczuJ9Ts4kFyf3XtQrrN1UTbu715KdIbbsrJtXQ74ADBCnjfX 8RUm3Y5XIaPcF4z2U8reMsbHCF120ENIfGwFRNo/Odx+1OVo1IrDB1+f/SP9ZP0T 6+iKvfSS4RavzB1tvLdJ2/911t7qtqsneU33kwQKL0wrFZsT4ih42uBfpw== =1hHY -----END PGP SIGNATURE----- Merge tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update for 5.9: - New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC. - Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings. - Make tempmon node as child of anatop node according to hardware architecture. - The vf610-zii device update: configure fiber port to 1000BaseX, add switch watchdog, MDIO speed and preamble. - A series from Fabio Estevam to update imx6qdl-sabresd and imx6q-tbs2910 for using MDIO node and reset-assert-us. - Align L2 cache-controller device node name with .yaml schema. - Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board. - A series of patches from Shengjiu Wang to enable various audio support on i.MX6 devices. - Add Gateworks System Controller support for imx6qdl-gw devices. - Change default #pwm-cells setting to <3> in the SoC dtsi files. - Other small random changes. * tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits) ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties ARM: dts: imx6q-tbs2910: Pass reset-assert-us ARM: dts: imx6q-tbs2910: Add an mdio node ARM: dts: imx6qdl-sabresd: Pass reset-assert-us ARM: dts: imx6qdl-sabresd: Add an mdio node ARM: dts: imx6qdl-gw: add Gateworks System Controller support ARM: dts: imx6ull: add MYiR MYS-6ULX SBC ARM: dts: vf610-zii-spb4: Add node for switch watchdog ARM: dts: colibri-imx6: remove pinctrl-names orphan ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX ARM: dts: ZII: update MDIO speed and preamble ARM: dts: vfxxx: Add node for CAAM ARM: dts: imx6qp-sabresd: enable sata ARM: dts: imx6qp-sabreauto: enable sata ARM: dts: add Protonic RVT board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic WD2 board ... Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Jonathan Cameron
|
d0d7c5845e |
Merge branch 'ib-5.8-jz47xx-ts' into HEAD
Immutable branch may be needed in input for a joystick set that is dependent on it. |
||
|
Cristian Ciocaltea
|
fac1d443a2 |
dt-bindings: reset: Add binding constants for Actions S500 RMU
Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU). Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/daf615160b3be9f38dcf7926cc82128c9c2d73e3.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Cristian Ciocaltea
|
1a4ae4138f |
dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
Add the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/67112af4f5bc0cc5e70ce8410feb369cc72972b8.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Stephen Boyd
|
63e95849a7 |
Merge branch 'clk-imx' into clk-next
* clk-imx: clk: imx: vf610: add CAAM clock clk: imx8mp: add mu root clk |
||
|
Stephen Boyd
|
b396b3d206 |
Merge branch 'clk-amlogic' into clk-next
* clk-amlogic: clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 clk: meson: g12a: Add support for NNA CLK source clocks dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs |
||
|
Stephen Boyd
|
fca1484576 |
Merge branch 'clk-renesas' into clk-next
* clk-renesas: clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: renesas: Add r8a774e1 CPG Core Clock Definitions dt-bindings: power: Add r8a774e1 SYSC power domain definitions |
||
|
Stephen Boyd
|
73d6bd7acb |
Merge branch 'clk-qcom' into clk-next
* clk-qcom: clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks |
||
|
Sivaprakash Murugesan
|
044f507dc0 |
clk: qcom: ipq8074: Add correct index for PCIe clocks
The PCIe clocks GCC_PCIE0_AXI_S_BRIDGE_CLK, GCC_PCIE0_RCHNG_CLK_SRC,
GCC_PCIE0_RCHNG_CLK are wrongly added to the gcc reset group.
Move them to the gcc clock group.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1594877570-9280-1-git-send-email-sivaprak@codeaurora.org
Fixes:
|