kernel_optimize_test/arch/arm/boot/dts
Arnd Bergmann 8ec1c81172 Merge branch 'arm-next' of git://git.xilinx.com/linux-xlnx into next/dt
From Michal Simek <michal.simek@xilinx.com>:

These are based on previous patches (arm-soc zynq/cleanup branch).
The branch is still based on rc3 but I have also tried to merged it
with the v3.7-rc5 and there is no issue.

* 'arm-next' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: add clk binding support to the ttc
  ARM: zynq: use zynq clk bindings
  clk: Add support for fundamental zynq clks
  ARM: zynq: dts: split up device tree
  ARM: zynq: Allow UART1 to be used as DEBUG_LL console.
  ARM: zynq: dts: add description of the second uart
  ARM: zynq: move arm-specific sys_timer out of ttc
  zynq: move static peripheral mappings
  zynq: remove use of CLKDEV_LOOKUP
  zynq: use pl310 device tree bindings
  zynq: use GIC device tree bindings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16 17:47:11 +01:00
..
testcases
aks-cdu.dts ARM: at91: Add support for board aks-cdu 2012-07-09 20:45:31 +02:00
am33xx.dtsi ARM: dts: AM33XX: Add usbss node 2012-11-06 15:46:25 +01:00
am335x-bone.dts ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone 2012-11-06 15:45:50 +01:00
am335x-evm.dts ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm 2012-11-06 15:45:49 +01:00
am335x-evmsk.dts ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk 2012-11-06 15:45:53 +01:00
am3517_mt_ventoux.dts
am3517-evm.dts arm/dts: Add support for TI AM3517/05 EVM board 2012-07-02 01:27:44 -07:00
armada-370-db.dts arm: mach-mvebu: add support for Armada 370 and Armada XP with DT 2012-07-10 15:47:49 +02:00
armada-370-xp.dtsi arm: mvebu: add address decoding controller to the DT 2012-09-21 18:05:29 +00:00
armada-370.dtsi arm: mvebu: add DT information for GPIO banks on Armada 370 and XP 2012-09-22 14:51:40 +00:00
armada-xp-db.dts ARM: mvebu: adjust Armada XP evaluation board DTS 2012-09-22 14:50:24 +00:00
armada-xp-mv78230.dtsi arm: mvebu: add DT information for GPIO banks on Armada 370 and XP 2012-09-22 14:51:40 +00:00
armada-xp-mv78260.dtsi arm: mvebu: add DT information for GPIO banks on Armada 370 and XP 2012-09-22 14:51:40 +00:00
armada-xp-mv78460.dtsi arm: mvebu: add DT information for GPIO banks on Armada 370 and XP 2012-09-22 14:51:40 +00:00
armada-xp.dtsi arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs 2012-08-02 10:05:32 -07:00
at91sam9g20.dtsi ARM: dts: add twi nodes for atmel SoCs 2012-09-12 14:49:16 +02:00
at91sam9g20ek_2mmc.dts
at91sam9g20ek_common.dtsi ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. 2012-10-24 18:08:47 +02:00
at91sam9g20ek.dts
at91sam9g25ek.dts ARM: dts: add twi nodes for atmel boards 2012-09-12 14:49:16 +02:00
at91sam9g45.dtsi Linux 3.6-rc7 2012-10-08 12:46:32 +02:00
at91sam9m10g45ek.dts ARM: dts: add twi nodes for atmel boards 2012-09-12 14:49:16 +02:00
at91sam9n12.dtsi Linux 3.6-rc7 2012-10-08 12:46:32 +02:00
at91sam9n12ek.dts ARM: dts: add twi nodes for atmel boards 2012-09-12 14:49:16 +02:00
at91sam9x5.dtsi Linux 3.6-rc7 2012-10-08 12:46:32 +02:00
at91sam9x5cm.dtsi
at91sam9260.dtsi Linux 3.6-rc7 2012-10-08 12:46:32 +02:00
at91sam9263.dtsi Linux 3.6-rc7 2012-10-08 12:46:32 +02:00
at91sam9263ek.dts
bcm2835-rpi-b.dts ARM: add infra-structure for BCM2835 and Raspberry Pi 2012-09-19 19:08:27 -06:00
bcm2835.dtsi ARM: bcm2835: instantiate console UART 2012-09-19 19:08:59 -06:00
ccu9540.dts ARM: ux500: List DT compatibility using platform names rather than by board 2012-11-01 13:02:25 +01:00
dbx5x0.dtsi ARM: ux500: Add node for the MMC GPIO regulator 2012-11-01 13:02:25 +01:00
dove-cm-a510.dts ARM: dove: add device tree descriptors 2012-09-21 17:07:24 +00:00
dove-cubox.dts ARM: dove: SolidRun CuBox DT 2012-09-21 17:07:25 +00:00
dove-dove-db.dts ARM: dove: add device tree descriptors 2012-09-21 17:07:24 +00:00
dove.dtsi ARM: dove: Add crypto engine to DT 2012-10-17 17:20:01 +00:00
ea3250.dts ARM: LPC32xx: Extend dts for EA3250 board 2012-09-06 11:40:48 +02:00
elpida_ecb240abacn.dtsi ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards 2012-09-07 19:18:40 +02:00
emev2-kzm9d.dts
emev2.dtsi
ethernut5.dts
evk-pro3.dts ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3 2012-07-09 20:22:00 +02:00
exynos4.dtsi ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4 2012-09-21 10:47:24 +09:00
exynos4210-origen.dts Merge branch 'next/dt-samsung' into next/dt-samsung-new 2012-09-22 12:17:37 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC 2012-09-07 06:14:26 +09:00
exynos4210-smdkv310.dts ARM: dts: use uart2 for console on smdkv310 and smdk5250 2012-09-21 11:04:20 +09:00
exynos4210-trats.dts ARM: dts: Split memory into 4 sections for exynos4210-trats 2012-10-17 18:10:34 +09:00
exynos4210.dtsi Merge branch 'next/dt-samsung' into next/dt-samsung-new 2012-09-22 12:17:37 +09:00
exynos5250-smdk5250.dts ARM: dts: Add nodes for dw_mmc controllers for Samsung EXYNOS5250 platforms 2012-09-26 09:03:02 +09:00
exynos5250.dtsi Merge branch 'next/dt2' into HEAD 2012-10-01 14:37:01 -07:00
ge863-pro3.dtsi ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3 2012-07-09 20:22:00 +02:00
highbank.dts Merge branch 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping 2012-10-02 19:13:12 -07:00
href.dtsi ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF 2012-11-01 12:59:32 +01:00
hrefprev60.dts ARM: ux500: List DT compatibility using platform names rather than by board 2012-11-01 13:02:25 +01:00
hrefv60plus.dts ARM: ux500: List DT compatibility using platform names rather than by board 2012-11-01 13:02:25 +01:00
imx6q-arm2.dts ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog' 2012-10-16 10:07:04 -07:00
imx6q-sabrelite.dts ARM: dts: imx6q-sabrelite: add usbotg pinctrl support 2012-09-19 11:25:42 +08:00
imx6q-sabresd.dts ARM: dts: imx6q-sabresd: add pinctrl settings 2012-09-11 16:26:48 +08:00
imx6q.dtsi i2c: imx: remove cpu_is_xxx by using platform_device_id 2012-10-15 10:03:15 +08:00
imx23-evk.dts ARM: mxs: Let mmc0 pin detect be generic 2012-08-23 10:01:30 +08:00
imx23-olinuxino.dts ARM: dts: imx23-olinuxino: Add USB host support 2012-09-19 11:05:09 +08:00
imx23-stmp378x_devb.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx23.dtsi ARM: dts: mxs: add the "clock-names" for gpmi-nand 2012-10-25 15:22:34 +02:00
imx25-karo-tx25.dts ARM i.MX: Add Ka-Ro TX25 devicetree 2012-11-12 12:11:27 +01:00
imx25.dtsi ARM i.MX25: Add devicetree 2012-11-12 12:11:23 +01:00
imx27-3ds.dts ARM: dts: imx27-3ds.dts: Fix serial console node 2012-08-02 11:14:39 +02:00
imx27-apf27.dts Add device tree file for the armadeus apf27 2012-11-16 09:12:00 +01:00
imx27-phytec-phycore.dts Merge branch 'next/dt' into HEAD 2012-10-01 14:23:11 -07:00
imx27.dtsi i2c: imx: remove cpu_is_xxx by using platform_device_id 2012-10-15 10:03:15 +08:00
imx28-apx4devkit.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx28-cfa10036.dts ARM: mxs: rename dts files with soc name being the prefix 2012-07-11 15:26:43 +08:00
imx28-cfa10049.dts ARM: dts: cfa10049: Add the 74HC595 gpio expanders 2012-09-11 09:51:30 +08:00
imx28-evk.dts ARM: mx28evk: Add I2C EEPROM support 2012-09-05 09:17:15 +08:00
imx28-m28evk.dts ARM: dts: m28evk: Fix MMC WP pin being inverted 2012-09-05 11:53:11 +08:00
imx28-tx28.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx28.dtsi ARM: dts: mxs: add the "clock-names" for gpmi-nand 2012-10-25 15:22:34 +02:00
imx31-bug.dts arm/dts: Add support for i.MX31 bug 1.x board from buglabs. 2012-07-10 19:23:03 +02:00
imx31.dtsi ARM i.MX31: Add devicetree support 2012-07-10 19:23:03 +02:00
imx51-babbage.dts imx-dt-3.7 2012-09-12 23:17:11 -07:00
imx51.dtsi i2c: imx: remove cpu_is_xxx by using platform_device_id 2012-10-15 10:03:15 +08:00
imx53-ard.dts ARM: dts: imx53-ard: add pinctrl settings 2012-09-11 16:26:51 +08:00
imx53-evk.dts ARM: dts: imx53-evk: add pinctrl settings 2012-09-11 16:26:52 +08:00
imx53-qsb.dts ARM: dts: imx53-qsb: add pinctrl settings 2012-09-11 16:26:50 +08:00
imx53-smd.dts ARM: dts: imx53-smd: add pinctrl settings 2012-09-11 16:26:52 +08:00
imx53.dtsi i2c: imx: remove cpu_is_xxx by using platform_device_id 2012-10-15 10:03:15 +08:00
integrator.dtsi ARM: 7519/1: integrator: convert platform devices to Device Tree 2012-09-17 23:20:23 +01:00
integratorap.dts ARM: 7518/1: integrator: convert AMBA devices to device tree 2012-09-17 23:20:22 +01:00
integratorcp.dts ARM: 7519/1: integrator: convert platform devices to Device Tree 2012-09-17 23:20:23 +01:00
kirkwood-dns320.dts ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi 2012-07-27 16:49:53 +02:00
kirkwood-dns325.dts ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi 2012-07-27 16:49:53 +02:00
kirkwood-dnskw.dtsi ARM: kirkwood: Use devicetree to define DNS-32[05] fan 2012-09-22 14:40:58 +00:00
kirkwood-dockstar.dts ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar 2012-09-21 15:13:10 +00:00
kirkwood-dreamplug.dts ARM: Kirkwood: Describe Dreamplug LEDs in DT. 2012-07-27 16:50:41 +02:00
kirkwood-goflexnet.dts ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood-ib62x0.dts ARM: Kirkwood: Describe IB62x0 LEDs in DT. 2012-07-27 16:50:18 +02:00
kirkwood-iconnect.dts ARM: Kirkwood: Describe iconnect nand in DT. 2012-09-22 14:38:58 +00:00
kirkwood-iomega_ix2_200.dts ARM: Kirkwood: Iomega ix2-200 DT support 2012-09-21 15:12:48 +00:00
kirkwood-km_kirkwood.dts ARM: initial DTS support for km_kirkwood 2012-09-21 17:07:17 +00:00
kirkwood-lschlv2.dts ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood-lsxhl.dts ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood-lsxl.dtsi ARM: kirkwood: fix buttons on lsxl boards 2012-10-18 17:07:23 +00:00
kirkwood-ts219-6281.dts ARM: Kirkwood: Add basic device tree support for QNAP TS219. 2012-07-27 16:48:52 +02:00
kirkwood-ts219-6282.dts ARM: Kirkwood: Add basic device tree support for QNAP TS219. 2012-07-27 16:48:52 +02:00
kirkwood-ts219.dtsi ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood.dtsi Crypto: CESA: Add support for DT based instantiation. 2012-09-22 14:40:00 +00:00
kizbox.dts
lpc32xx.dtsi ARM: LPC32xx: Add PWM to base dts file 2012-07-20 13:33:09 +02:00
Makefile Merge branch 'arm-next' of git://git.xilinx.com/linux-xlnx into next/dt 2012-11-16 17:47:11 +01:00
mmp2-brownstone.dts
mmp2.dtsi ARM: mmp: enable tauros2 cache in mmp2 dt 2012-08-16 16:17:10 +08:00
msm8660-surf.dts ARM: msm: Move 8660 to DT timer 2012-09-13 11:14:54 -07:00
msm8960-cdp.dts ARM: msm: Add DT support for 8960 2012-09-13 11:16:47 -07:00
omap2.dtsi ARM: dts: OMAP: Add timer nodes 2012-10-29 16:56:32 +01:00
omap3-beagle-xm.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-beagle.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-evm.dts ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM 2012-09-07 19:22:44 +02:00
omap3-overo.dtsi ARM: dts: omap3-overo: Add support for the blue LED 2012-09-10 15:44:45 +02:00
omap3-tobi.dts ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board 2012-09-10 12:07:22 +02:00
omap3.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap4-panda-a4.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda-es.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-sdp-es23plus.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-sdp.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-var-som.dts ARM: dts: OMAP: Rename pandaES and var_som for consistency 2012-10-29 16:56:35 +01:00
omap4.dtsi ARM: dts: OMAP4: Update timer addresses 2012-11-01 17:03:31 +01:00
omap5-evm.dts ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
omap5.dtsi ARM: dts: omap5: EMIF device tree data for OMAP5 boards 2012-11-05 18:38:03 +01:00
omap36xx.dtsi arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm 2012-09-10 10:34:51 -07:00
omap2420-h4.dts ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2 2012-09-07 19:22:49 +02:00
omap2420.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap2430.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
phy3250.dts ARM: LPC32xx: LED fix in PHY3250 DTS file 2012-09-25 10:11:41 +02:00
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
prima2-evb.dts pinctrl: sirf: add DT-binding pinmux mapping support 2012-09-05 14:48:10 +08:00
prima2.dtsi pinctrl: sirf: add DT-binding pinmux mapping support 2012-09-05 14:48:10 +08:00
pxa2xx.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa3xx.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa27x.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa168-aspenite.dts
pxa168.dtsi
pxa910-dkb.dts ARM: dts: Enable 88pm860x pmic 2012-10-02 11:43:17 +02:00
pxa910.dtsi MFD bits for the 3.7 merge window. 2012-10-05 12:01:30 +09:00
r8a7740-armadillo800eva.dts
r8a7740.dtsi ARM: mach-shmobile: r8a7740 generic board support via DT 2012-07-06 21:03:35 +02:00
samsung_k3pe0e000b.dtsi ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
sh73a0-kzm9g.dts
sh7372.dtsi
sh7377.dtsi ARM: mach-shmobile: sh7377 generic board support via DT 2012-07-06 21:05:20 +02:00
skeleton.dtsi
snowball.dts ARM: ux500: List DT compatibility using platform names rather than by board 2012-11-01 13:02:25 +01:00
socfpga_cyclone5.dts ARM: socfpga: initial support for Altera's SOCFPGA platform 2012-07-19 10:39:00 +02:00
socfpga.dtsi ARM: socfpga: initial support for Altera's SOCFPGA platform 2012-07-19 10:39:00 +02:00
spear3xx.dtsi
spear13xx.dtsi ARM: SPEAr13xx: Fix Interrupt bindings 2012-07-18 10:04:45 +05:30
spear300-evb.dts mmc: sdhci-spear: add device tree bindings 2012-10-07 17:41:44 -04:00
spear300.dtsi
spear310-evb.dts
spear310.dtsi
spear320-evb.dts mmc: sdhci-spear: add device tree bindings 2012-10-07 17:41:44 -04:00
spear320.dtsi
spear600-evb.dts
spear600.dtsi ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi 2012-07-18 10:05:05 +05:30
spear1310-evb.dts
spear1310.dtsi
spear1340-evb.dts
spear1340.dtsi
stuib.dtsi ARM: ux500: Change the type of interrupt to something compatible 2012-11-01 13:02:26 +01:00
tegra20-harmony.dts ARM: tegra: harmony: fix ldo7 regulator-name 2012-09-20 19:54:02 -07:00
tegra20-medcom-wide.dts ARM: tegra: Add Avionic Design Medcom-Wide support 2012-09-20 09:34:00 -06:00
tegra20-paz00.dts ARM: dt: tegra: paz00: add regulators 2012-09-06 11:48:39 -06:00
tegra20-plutux.dts ARM: tegra: Add Avionic Design Plutux support 2012-09-20 09:34:00 -06:00
tegra20-seaboard.dts ARM: tegra: fix invalid unit-address in tegra*.dtsi 2012-10-07 07:02:06 -07:00
tegra20-tamonten.dtsi ARM: tegra: Add Avionic Design Tamonten support 2012-09-20 09:34:00 -06:00
tegra20-tec.dts ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support 2012-09-20 09:34:01 -06:00
tegra20-trimslice.dts ARM: dt: tegra trimslice: enable USB2 port 2012-07-25 22:09:16 +02:00
tegra20-ventana.dts ARM: dt: tegra: configure power off for some boards 2012-09-11 13:48:36 -06:00
tegra20-whistler.dts ARM: dt: tegra: whistler: configure power off 2012-09-19 10:19:38 -06:00
tegra20.dtsi ARM: tegra: fix invalid unit-address in tegra*.dtsi 2012-10-07 07:02:06 -07:00
tegra30-cardhu-a02.dts ARM: tegra: cardhu: add dt entry for fixed regulators 2012-09-06 11:48:38 -06:00
tegra30-cardhu-a04.dts ARM: tegra: cardhu: add dt entry for fixed regulators 2012-09-06 11:48:38 -06:00
tegra30-cardhu.dtsi ARM: dt: tegra: configure power off for some boards 2012-09-11 13:48:36 -06:00
tegra30.dtsi ARM: tegra: dts: Add pwm label 2012-09-20 09:33:59 -06:00
tny_a9g20.dts
tny_a9260_common.dtsi
tny_a9260.dts
tny_a9263.dts
tps65217.dtsi arm/dts: regulator: Add tps65217 device tree data 2012-08-30 13:59:17 -07:00
tps65910.dtsi arm/dts: regulator: Add tps65910 device tree data 2012-08-30 13:57:53 -07:00
twl4030.dtsi ARM: dts: Add twl4030-usb data 2012-10-29 16:56:29 +01:00
twl6030.dtsi ARM: dts: Add twl6030-usb data 2012-10-29 16:56:29 +01:00
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts
usb_a9260_common.dtsi
usb_a9260.dts
usb_a9263.dts
versatile-ab.dts
versatile-pb.dts
vexpress-v2m-rs1.dtsi ARM: vexpress: Add fixed regulator for SMSC 2012-07-13 11:48:28 +01:00
vexpress-v2m.dtsi ARM: vexpress: Add fixed regulator for SMSC 2012-07-13 11:48:28 +01:00
vexpress-v2p-ca5s.dts
vexpress-v2p-ca9.dts
vexpress-v2p-ca15_a7.dts ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile 2012-07-13 11:48:29 +01:00
vexpress-v2p-ca15-tc1.dts ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses 2012-07-13 11:48:28 +01:00
vt8500-bv07.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
vt8500.dtsi arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8505-ref.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8505.dtsi dtb: fix interrupt assignment for ehci/uhci on wm8505 2012-10-15 21:12:52 -07:00
wm8650-mid.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8650.dtsi arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
xenvm-4.2.dts arm: introduce a DTS for Xen unprivileged virtual machines 2012-09-24 16:40:52 +00:00
zynq-7000.dtsi ARM: zynq: add clk binding support to the ttc 2012-11-14 16:10:42 +01:00
zynq-zc702.dts ARM: zynq: add clk binding support to the ttc 2012-11-14 16:10:42 +01:00